M65-S9092 doesn't recognize all RAM

I've never had memory issues with this model until recently. Memory ussage was through the roof and performance was dropping. Then I realized the BIOS wasn't seeing 500mgs worth of memory that was factory installed. What happened? Is the memory damaged? I switched memory slots, no change. I plugged one in at a time, no change. What's going on?!

That is Kingston "Value" Ram, and is not always compatible with other brands, purchase higher quality ram.

Similar Messages

  • ITunes doesn't recognize all of my music files

    I recently updated to 11.3 - My music library has always been recognized in its entirety up until this point. I am super OCD about it, everything is well organized and all my artwork is in place. For some reason it does not recognize all the music files now, including the fact that I lost some of my album artwork. I went ahead and followed steps (1-6) in re-creating my iTunes library and playlists. After doing this it still doesn't recognize all of my music files. What should be my next step so iTunes shows/sees everything as it did before the update?
    Thank you!

    Yes,
    Let's move the discussion from the iTunes for Mac to the iTunes for Windows forum.
    Thanks,

  • IPhoto doesn't recognize all Photo Stream albums.

    When I take a photo with my iPhone, the photo goes to my photo stream.  I then send it to my TV Photo Stream album.  The TV Photo Stream album is displayed on my Apple TV.  My issue comes when I sync my iPhone with iPhoto.  iPhoto doesn't display all my photo stream albums, i.e."TV Photo Stream"  How do I get iPhoto to display all of my photo Stream albums?  I only use one account, so I know that I am signed in under the right ID.  I am not sure were to post this inquire, should it go to Photo Stream or iPhoto?  I am not sure what App has the issue, or is it just me?  Thank you,

    iPhoto: 9.5.1 (902.17)
    MacOS X version 10.9.4
    Upon opening iPhoto, it asks me what photo library I want to use. At the left hand bottom there is a box saying (translated by me from Norwegian):
    "iPhoto cannot start without a photo library. Select a library from the list, find another library on the machine, or create a new library to import files into. The library you chose now, will be used automatically next time you open iPhoto."
    Then there is a box with no libraries listed, and underneath I've got the options of creating a new library or simply clicking "other library".
    First time this happened I created a new library and thus there are 2 libraries: iPhoto-library and iPhoto-library_2 to chose from when clicking "Other library" There is also a non-selectable (grey) "Photo Booth-library" in the same list, which is in the path user/Photos/iPhoto-library or .../iPhoto-library2. But when clicking either of these the "open" button just keeps flashing indefinitely. Upon trying to open iPhoto-library or iPhoto-library_2 from Finder, it just opens iPhoto and prompting me to chose library like before...
    The only thing that I changed (I think) is that I installed PSE 12.

  • Why my iMac (mid 2010 - model 11,2) doesn't recognize the RAM upgrade?

    Hi, I have a big problem. I bought on Amazon 16 GB of RAM (Corsair Ddr3 1333Mhz 4Gb 204 Sodimm unbuffered). The problem is: my iMac can recognize a max of 3 benches of RAM but not 4. Everytime i try to upgrade all the 4 benches the iMac freezes and does 3 loud beep, while when upgrading only 3 benches it works. These are the attempts i made with every single bench of RAM:
    -2x2GB Original RAM - IT WORKS
    -1x4GB bought RAM - IT WORKS - i try every single bench of RAM, this means that the products are ok.
    -2x4GB bought RAM - IT WORKS
    -3x4GB bought RAM - IT WORKS
    -4x4GB bought RAM - DOESN'T WORK - 3 beeps signal
    -3x4GB bought RAM + 1x2GB Original RAM - DOESN'T WORK - 3 beeps signal
    -2x4GB bought RAM + 2x2GB Original RAM - DOESN'T WORK - 3 beeps signal
    Is there someone who had the same issue and can tell me how to solve it?
    Thanks!

    As has been mentioned endlessly in this Forum, iMacs are particularly sensitive to the exact Brand of RAM that they will run Stabley with.  Samsung, Crucial and OWC's are noteworthy brands that have consistently received glowing reports of compatibility herein.  Straying to other brands frequently results in the kind of problem you are experiencing.
    I would concur with X423424X that you return the Corsair modules and go with OWC (http://www.macsales.com) or one of the others I've recommended.
    Hope this helps

  • After Effects doesn't recognize increased ram

    I increased my ram from 2GB to 4GB. Windows XP recognizes the increase but After Effects 7.0 still shows only 2GB of ram. Is there a setting in After Effects that needs to be changed to recognize the additional ram?

    Search the forums (or any other tech website) for "boot.ini" and "/3GB switch". It's a system setting, not an AE thing. And, before you are disappointed: AE will not use more than 3GB on Windows XP 32bit, because it won't allow more. It will only use 4GB un XP 64 or Vista 64.
    Mylenium

  • GarageBand doesn't recognize all of my AU plugins?

    GarageBand is a fantastic tool, and it is very useful to me when making music. However, I recently decided to try some additional sound modules (KontaktPlayer, Crystal, and Alchemy were a few) and effects (Amplitube 3 Free, AmpLion, etc), and this is where the troubles started.
    The effects went just fine. I installed them and could access them in GarageBand. I had less luck with the sound modules, though. For each one, I downloaded the appropriate file/folder, followed the installation instructions contained in each one, and then checked GarageBand. Out of the dozen or so that I tried to install, only one -Alchemy- made it through. All the others, which had each said something like "Installation successfully completed", were not in the dropdown list of sound modules on my MIDI instrument channel.
    I then tried to put the appropriate files in the right folder manually. I went in Finder -> my hard drive -> Library -> Audio -> Plug-Ins -> Components and then pasted in the .component files. This did not work.
    What am I missing?  I have searched the Internet and found many "tutorials" on installing virtual instrumets- very few of them have anything beyond "download the file and it will appear in GarageBand as though 'twere magic" (which is clearly not the case here), and those that did go beyond that all told me to paste the .component files in the location where they are currently sitting, unheeded by GarageBand. Am I putting them in the wrong location? Am I downloading/copying/pasting the wrong files? Am I not using the right magic words?
    Any help would be appreciated. I have been trying to make this work for days, to no avail.

    Thanks for your feedback! That was the very first video I ran into, actually. The issue was that when I went into that dropdown list, some of the AU plugins I had downloaded were present, and some were not, even though I had them all installed and in the same folder. 
    However, when I turned on my computer this morning and opened GarageBand, they were all there! Guess it just needed some time to find them. All's well that ends well!

  • Music library doesn't recognize all mp3 files

    I have a nokia n97 with firmware 20. I have transferred an album of 66 mp3 songs to my mobile via mass storage, but only 58 songs show up in the music player library.
    I can see the songs by using file manager; I can even play them from the file manager. I also tried and re-tried refreshing the library, in vain.
    Any idea anyone?
    Pa blier
    Pik li avan li pik twa

    I managed to work around the problem. Moved all the missing songs to a new folder. Change the Album name for these files. Refresh library. And it's working nw.
    I still dunno wat's the problem though :-/, just a work around solution.
    After that I figured out that out of the 4000 mp3 songs I transferred from my laptop, about 25 were missing from the library.All of them were detected after moving them to a new folder and modifying the ID3 tag.
    Pa blier
    Pik li avan li pik twa

  • Tecra 8200 doesn't recognize RAM in Slot B

    Since a few days my Tecra doesn't recognize the RAM Module in Slot B. Before all was fine. I have 2x256MB Modules. I was wondering why my Tecra becomes more slow the last days and then i saw that i have now just 256MB RAM. I change the Modules from Slot A to B. I checked also both RAM moduls with MEMCheck. Both are ok! Just when i put one RAM to Slot B and none to Slot A my Tecra doesn't boot up! If i insert both moduls my Tecra boots up but just with 256MB RAM.
    Is there an other solution then to buy a new Notebook? Is my Mainbord demaged?
    I was so contently with my Tecra until now ;-)

    Hi
    Like Joao said, probably the memory slot B is defective and therefore the memory module cannot be recognized.
    The notebook supports max 512MB (2x256MB) but I dont know if the single 512MB module can be used in one slot.
    I presume its not possible.

  • Windows Vista doesn't recognize Mac Pro RAM

    I have installed Windows Vista Business on my Mac Pro using Boot Camp, and have found some anomalies that seem strange. It is basically working well (for Windows....).
    1. I installed this on a 500Gb HD on my Mac Pro. This machine is a fully configured box doing video editing, with extensive AV files. It has all four drive bays filled, 3 of them with 1Tb drives, the thrid with a single 500Gb drive. I was a bit surprised to find that Boot Camp won't allow partitioning of its OSX installed boot HD beyond a Mac Partition and the Boot Camp paritition, or a secondary entire HD dedicated to Windows. This is not very practical with these large drives, since even though HD storage is fairly cheap, I don't want to give Microsoft more than maybe 100gb on a drive. All of the other HDs are partitioned for multiple parititions, which I need to preserve. The OSX boot drive has 3 OSX partitions already installed. Any ideas on how to do this better? Yes, I know I can use Parallels or VMWare, and do, but find that native Boot Camp Windows is better.
    2. Windows Vista is running on a dedicated HD in Boot Camp on this machine (to all appearances running fine), but doesn't recognize more than 2Gb of RAM on my machine which is configured with 10Gb of RAM which is recognized appropriately in OSX. What am I missing?
    I would appreciate any help on a partitioning scheme that works to support multiple partitions on these large drives, and a reason that only 2Gb out of 10Gb of RAM is recognized by Windows Vista Business in Boot Camp.
    Thanks!!!

    Thanks for your response.
    I am running in Boot Camp, which runs in native mode without emulation. The advantage is that if you are going to run Windows, which is my goal, it doesn't have the overhead of OSX. Indeed, most Mac machines are among the fastest Windows machines available for equivalent hardware when running Windows in native mode. There are a few more arcane advantages to running natively, particularly in terms of connecting to external devices. There is no background RAM overhead when run natively.
    Thanks....

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

    i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

    Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
    But hey thanks for your help,

  • I have a new computer and itunes content didn't transfer - it doesn't recognize me, all my apps are gone, what do I do, I have a new computer and itunes content didn't transfer - it doesn't recognize me, all my apps are gone, what do I do

    I received a new laptop.  the person that transferred all of my files, didn't know what they were doing when transferring itunes content.  Now I have my new computer and itunes doesn't contain all of my music.  I don't know how to set it up to recognize my account and I don't see any of my apps.  What do I do now?

    Copy the ENTIRE iTunes folder from the old computer to the new computer.

  • I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going?

    I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
    Best regards,
    Michele

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

    I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

    Read here.
    http://support.apple.com/kb/TS1591

  • My desktop all of the sudden doesn't recognize my iPod Nano when I plug it in (gives me an error message).  I've tried everything!  HELP!

    Up until yesterday, my nano was syncing just fine with my iTunes.  Out of the blue my brand new desktop doesn't recognize my iPod Nano device.  I have tried uninstalling/reinstalling iTunes.  I've worked through all the diagnostics apple had to offer... but nothing.  Can you help?

    Does this problematic song play okay in iTunes?  Have you tried removing and resyncing it to your device via iTunes?
    B-rock

Maybe you are looking for