M7 301 - The value of goods movement is negative. Movemt. typ. 101

Hi Team,
While doing GRN for import material in foreign currency with movement type '101', system is giving an error "The value of goods movement is negative" under message number M7 301.
Please let me know the cause for the error.
Regards,
Anmol Saxena.
Edited by: Anmol Saxena on Apr 26, 2011 4:34 PM

Hi,
This error can be caused by the exchange rate differences.
Best Regards,
Arminda Jack

Similar Messages

  • Value of the goods movement is negative:

    Hi All,
    We are posting GR for  Import PO. 
    MIRO for custom has been already done.
    But at the time of posting GR, system is throwing following error.
    Value of the goods movement is negative:
        Message no. M7301
    Pls guide.
    We are not working with subcontracting process. its a normal raw material purchase.
    Regards
    Edited by: sapsarang on Jan 21, 2011 5:44 AM

    Can you please share the solution ...

  • Value of the goods movement is negative in GR

    Dear all,
    While preparing GR for an imports sch agmnt we are receiving an error message "Value of the goods movement is negative".
    System is giving the diagnosis of the error message are "Sub-contracting by-product value is higher than GR value" & "Delivery cost is negative".
    But our case is an imports GR and we have prepared GR for same sch agmnt on last month also.
    Pl send us your valuable suggestions to resolve this issue. (What are all the other factors to cause this type of error)
    Regards,
    M.Sarathi

    Hi
    Check the following
    1) In Scheduling agreement additional data for that line in ME32l, check for field Pr.date.cat. It should not be 5. If it is 5 and the price validity falls below GR date then you get this errror.
    2)If you get that Pr.date.cat field in display mode, remove time dependent condition tick from document type config. then it will allow you to change.
    Hope your problem will be solved. If not please revert back
    Regards
    Antony

  • Value of the goods movement is negative in MIGO GRN doc cancellation

    Dear gurus,
    while doing GRN cancellation in MIGO i m facing the error like
    Value of the goods movement is negative:
         Message no. M7301
    Plz suggest me.

    not sub contracting.may be the value of delivery cost.
    plz suggest how to go further.

  • Value of the goods movement is negative: Message no. M7301

    HI,
        In subcontracting process while receiving the goods from subcontractor following error is coming " Value of the goods movement is negative:"Message no. M7301.
    pls tell me why this error is coming and how to solve it
    thanks & regards
    vr

    Hai,
    Ur parent material cost is less tahn the components cost. make correction of price in parent material.
    regards,
    BSK

  • Avoid the delivery creation in MIGO/MB1B at the time of goods movement

    Hi All
    Can anyone please help me to know, How to skip the delivery creation step in MIGO/MB1B at the time of goods movement (311) indebug mode.
    In which part of the code the delivery creation logic would be written...?
    Thanks and regrds
    Karuna

    Hi:
             It looks like to me if there is validation working in background . Please check in GGB4  there will validation active for this asset class . Low value asset check restricts you from posting an amount as specified in OAYK. Please check.
    Br

  • M7301 VALUE OF THIS GOOD MOVEMENT IS NEGATIVE

    Hi Gurus,
    While doing the GR ( via IDOC ) against the PO getting an error VALUE OF THIS GOOD MOVEMENT IS NEGATIVE. The process is below
    PO Created with more than 300 Items and 12 items was deleted. The PO is not GR based invoice veritifcation,
    IR has been done for the items.
    We are using inbound delivery to update the Purchase order. Later based on the Inbound delivery GR need to done.
    Not manual GR, 3 PL sends the file and in SAP it updates the GR against the inbound delivery.
    While doing GR we are facing the Error M701 VALUE OF THIS GOOD MOVEMENT IS NEGATIVE
    I checked all of the aspects likeOSS note 773515 we are using 4.7 version.
    Regards,
    Yuva

    What is the Movement type you are using?

  • IValue of the goods movement is negative... in STO

    Hi Gurus,
    I have two line items intra-company STO PO. When doing the MIGO it is giving the follwoing error message
    Value of the goods movement is negative for one material, but another material is OK.
    What will be the cause.
    Thanks,
    Praveen Katageri

    In STO process sytem will not generate any accounting document  while Migo posting.It will post the document when you do delivery PGI.Can you please check both Plants for material one accounting view is there it negative.If any one has negative then that one stopping you to post MIGO transaction.
    To change the price to negative to positive use MR21 transaction to change the price.Before you do this check why the material master has negative price.

  • Does MB5L capture the data if goods movement without accounting document

    Dear Guru,
    Can you please advice me if the transaction MB5L capture the data for those goods movement without accounting document?
    Thanks and Regards,
    CW

    Since MB5L captures based on the material and valuation area, still you can see the postings that has been made non-valuated.

  • PGI: Value of the Goods Movement is negative

    Hi,
    Can anybody tell me what is this error.
    The error is as in subject and is ocuuring for STSA while doing PGI.
    Early reply highly appreciated.
    Thanks and Regards,
    Seshu.

    Hi Sheshkumar,
    Goto TC "OBA7" and select "WA" for goods issue. Then goto the detailed screen. Here, "Negetive Postings Allowed" allows you to post -ve values. Check this out and set accordingly.
    Regards,
    Raghav

  • Limit to the value of Goods receipt in a Scheduling agreement

    Hi All,
    Please let me know if there is any way to limit the goods receipt posting against a Scheduling Agreement to equal to or less than the total agreement value. Or else if the GR's has already been posted for some value, the system shuld check and allow a user to post furthur for the remainin value only.
    Also let me know if there is a way to check the remaining quantity in the scheduling agreement and allow MRP run to generate new schedule lines for that quantity only..

    Hello
    It is a special case that we have to analyze that order now.
    As I said, this material was not costed any time.  This production order was created for a Sales order.  when I go to the cost analysis from the production order, I find the plan costs.  But it is not from the costing run CK40n or CK11n.  I hope it is from the sales order cost estimate.
    But I am unable to understand how the goods receipt was posted as the material master does not have any price.  I find that the goods receipt was posted @ 489.88 per unit.
    I am unable to find out from where this 489.88 unit price was used by the system for GR posting.

  • Automatic Equipment creation at the time of Goods movement

    Hi experts,
    Can any one tell me where exactly the equipment creation happens at the time of GR creation, i mean program or function module.
    thanks,
    Veeru

    Hello experts ,
    Any response ??
    Regards
    Anis

  • Hide the quantity field at goods movements in cofirmation.

    HI,
    My client is using CO11N for confirmation. and doing auto goods reciept and auto goods issue.
    Whn I am clicking on Goods movement in CO11N system is showing me which material is going in goods reciept and which is in Goods issue.
       Now my requirement is I want to hide the quantity field of the material in goods movement because some time user is changing the quantity of goods issue.
       Wat can I do for the same?
    Please sugest
    Thanks & Regards,
    Nilesh Ithape.

    Dear Nilesh,
    Try to achieve the same using the authorization control.
    You can take the help of the BASIS consultant and try to find the authorization object and the value
    which's allowing to change the quantity.
    Check whether this is the particular object C_AFKO_AWA is allowing the same(I'm not sure).
    After finding out the Authorization object remove the tick mark for the value which's for change or delete.
    You can find it using SU24 T code or using SUIM and other related T codes.
    If it cant be done even after authorization control ,revert back to the forum.
    Regards
    Mangalraj.S

  • Automatic goods movement at the time of confirmation in IW42

    Hey gurus,
    In a maintenance order i ve reserved some materials to be issued from the stores. Now i am not issuing the reserved materials from the stores and going to iw42 for confirming the operations of the order. If i select the item overview of the operation line against which we have booked the material, in the goods movement section i can see my reserved material which hasn't been issued from the stores. Now when i'm saving the confirmation, goods movement of the unissued material is automatically taking place and the cost of the material is getting booked in the order. How do i stop this automatic posting of material?
    Regards,
    Abhishek

    Hi friend
               in spro
    Plant Maintenance and Customer Service-Maintenance and Service ProcessingMaintenance and Service OrdersCompletion ConfirmationsDefine Control Parameters for Completion Confirmations
    you can define the setting of goods movements
    jitender

  • Report Requirement for the Goods Movement

    Dear Gurs,
    I want to see the entire goods movment happend for producing one Finished material.
    Is there any std report that can show the list of good movement (261)
    Eg
    For producing 1 Qty FG I required 50 Kg of SF .
    That SF consits of 2 Raw material RM 1 and RM2  .
    RM1  Required 35 Kg and RM 2 Requires 15 Kg
    During Good Movement (261)of  -  SF
    RM1 - Batch 421 - 12 Kg 
    RM1- Batch 422 - 18 Kg
    RM1 - Batch 433 - 5 Kg
    RM2 Batch 888 - 5 Kg
    RM2 Batch 889 - 10 Kg
    During the Good Movement (261)of  -  FG
    SF Batch 1123 - 50 Kg Issued.
    With reference to the Finish material , I want to seen the goods movement happend for the FG .
    Is there any std report to seen the details at Multilevels
    Srinivasan.

    Hi,
    I donot think such Multi level Consumption Report is available. I think if use collective order concept, u can get it. Otherwise u have to pass the list Production order number for each BOM level at COOIS.
    or u have to develop customized report.
    Pradeep

Maybe you are looking for