M72z - trying to install Wireless-N 2230 :/

Hi,
I'm trying to install Wireless-N 2230 in M72z but when i plug it inn and start the machine I get a communicat:
Error 1802: unauthorised network card plugged in - Power off and remove the network card.
Well - I thought that if I buy a card that is listed in Lenovo PSREF it will work :/
Seems I have to buy a part with CRU number. You know a source to find it?
Cheers
Edit: I just learned that this part has to be ordered via Lenovo service and mounted by Lenovo service - it has no CRU (Customer repleacable unit) - only FRU (Field repleacable unit - only trained service).
Topic to be closed.

Hi hdkimball,
How about trying to get into the setup page of your WRT160N v2? Launch your internet explorer or other browsers then you type in 192.168.1.1. Leave username blank and password in small letters admin. Here are the links on how to reconfigure your router.
Setting Up a Router with Cable Internet Service
Setting up a Linksys router for DSL Internet connection

Similar Messages

Trying to install wireless network, but can't find installation CD

Would like to get another CD to install a wireless network for Cisco wrt160n v2 router. I have rest the router to factory default. Would prefer to download the install wizard CD if possible.
Thanks in advance for your help!
Solved!
Go to Solution.

Hi hdkimball,
How about trying to get into the setup page of your WRT160N v2? Launch your internet explorer or other browsers then you type in 192.168.1.1. Leave username blank and password in small letters admin. Here are the links on how to reconfigure your router.
Setting Up a Router with Cable Internet Service
Setting up a Linksys router for DSL Internet connection

Trying to install wireless usb card

I put in the driver disc and click on the right file then the box comes up and shows waiting for disc copy help and nothing else happens. what am I doing wrong? is it the wrong software?
Thanks
Robert

I would recommend maximizing the RAM with a 512 MB module in the one user-accessible RAM slot.
http://eshop.macsales.com/item/Other%20World%20Computing/100SO512328L/
Instructions for installing it can be found in this Apple Knowledge Base article:
http://docs.info.apple.com/article.html?artnum=111918
If you have the original install and restore CDs that came with it, and they include Mac OS X 10.2, you could get by with a 10.3 upgrade CD. This would be a little bit cheaper than the full install CDs, but if you ever had to install the system again, you would have to install Mac OS X 10.2 first, whereas with the Mac OS X 10.3 (Panther) full retail install set, you wouldn't have to take that extra step of installing Mac OS X 10.2 before upgrading again to 10.3.
http://hardcoremac.stores.yahoo.net/macosx10pare.html
http://hardcoremac.stores.yahoo.net/macosx10paup.html
The original AirPort Card will work with the iBook as-is (with Mac OS X 10.2).
Possible sources for the original AirPort Card:
http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
http://store.airportcardsdirect.com/
http://eshop.macsales.com/item/Apple/M7600LLE/
http://www.megamacs.com/v1/?action=view&pid=967052
Instructions for installing the original AirPort Card can be found here:
http://docs.info.apple.com/article.html?artnum=111919

Officejet L7780 will not install wirelessly on network.

Officejet L7780 trying to install wirelessly on Windows 7 64 bit machine. I have an AT&T 2Wire router, and I am running MacAfee on my PC. In the past I could install, but the printer would disappear and need to be reinstalled. I have upgraded the firmware on the printer. I have turned off the firewall on the PC. I have uninstalled, deleted HP files, tried to reinstall and I always reach the point where it says the IP on my printer is not compatible with the IP on my router. I choose to ignore or connect anyway, and nothing happens. I have rebooted and reset the printer, I have rebooted the router, I have rebooted the PC, nothing works. I have tried the Network doctor, but the printer is not installled, I have tried various HP upgrade files, nothing. Thanks

Hi TenorWebb,
Try using the scrubber built into the CD or Download.
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79353-2&cc=us&dlc=en&lc=en&...=
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79353-2&cc=us&dlc=en&lc=en&...=
10. Run the download to reinstall the printer
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work

While trying to install my (less than 2 year old) HP6500 Wireless all-in-one software on my 3rd networked computer, the software installation went into a loop and would not complete the installation. After about an hour or so of waiting, I physically had to unplug the printer & eject the CD. Upon doing so, the printer became next to useless. The printer key pad no longer functions except when I first plug it in, and I can no longer access it from the other 2 original computers, even with USB. The HP solution center says it’s on line, until I go to print via USB, then it says it’s offline. I can hook the USB up on the Widows 7 unit and force it to print Word Office documents, but when I try to print documents on it from either Internet Explorer or Fire Fox it wants to send a Fax??? I've uninstalled and reinstalled the software 3 times on my Windows 7 unit now to no avail. Is it my printer, the printer Firmware or what? I have downloaded and run all the HP & Microsoft troubleshooting tools on the Windows 7 unit to no avail. However; HP downloads will not successfully complete on my XP unit. What should I do? Should I start over with a new wireless printer?
Totally Confuzed

Re: After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
Ref: 02-23-2012 08:53 AM
12:38 AM 2/24/2012 UPDATE ON WHAT I HAVE TRIED AGAIN:
1. Power Reset on the Printer: Power off the printer. Unplug the power cable from the back of the unit. Wait 60 seconds. Replug the power cable to the printer and power it on. DONE
2. Print a test page: Follow this document to print the test page. PRINTER SCREEN SAYS IT'S PRINTING AND THE POWER LIGHT IS FLASHING LIKE IT'S BUSY, BUT NOTHING IS HAPPENING. ONLY WAY TO USE IT NOW IS TO UNPLUG IT AND START OVER. THIS HAPPENS ALL THE TIME NOW. IT WILL NOT PRINT TEST REPORTS.
3. Create a copy of the printed test page. CANNOT DO NOW - (PRINTER FREEZES UP WITH A BLINKING POWER LIGHT)
4. Print the Wireless Network Test Report (To check if there are any errors) CANNOT DO
Press the Setup button ( ). DOESN'T WORK EXCEPT MOMENTARILY...NOT LONG ENOUGH TO MAKE A SELECTION BEFORE IT HANGS AND FREEZES UP...
Press the Right Arrow button ( ) to select Network Setup, and then press the OK button. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
Press the Right Arrow button ( ) to select Wireless Network Test , and then press the OK button. The Wireless Network Test Report prints. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
If you did not encounter any errors while performing the steps above then I think the hardware is OK. Test the software next. Let's use Windows 7 as the test platform. I DON'T THINK THE HARDWARE IS OK.
1. Download the driver from HP.com. Once it gives you the option to either Run or Save make sure to select Save and then select Desktop as the target location where it will save the file. This is just to make it easier to find it. Once it finishes downloading the file, double click it to initiate the installation process. Follow the on screen instructions until you reach the "select how you want to connect the printer" window comes up. I ALREADY HAVE 3 COPIES ON MY DESKTOP & NONE OF THEM REACT ANY DIFFERENTLY.
2. At the "select how you want to connect the printer" window select USB and then click Next (I think there is a next button). It should asks you to connect your printer but we are NOT going to do that. Place a checkmark on the option on the bottom of the window that gives you the option to bypass the connection phase of the installation. Click Next to proceed. Once the the installation process completes, restart your computer. I HAVE DONE IT BOTH WAYS BEFORE AND CANNOT GET THE INSTALLATION TO COMPLETE ON ANY OF THE 3 COMPUTERS NOW.
If you did not encounter any errors at this point then it looks like the software installation process is good. Proceed to the next test. END OF TEST FOR TONIGHT. THANKS
1. After the computer completely boots up, connect the USB cable to the printer and to the computer. The computer should detect the printer and initiate the HP installation process for it. Follow the onscreen instructions to complete the install.
2. Try printing to test functionality.

HT5676 my macpro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help!! and what does internal error got to do with installing a printer?

my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

I'm trying to install a Linksys wireless router. Went th...

I'm trying to install a Linksys wireless router. Went through the installation software and all appears to be in order. Except that the message that I'm getting is that my router is not signed into my internet connection. Yet it is--I'm writing this aren't I?
The 4 green lights are on and I've reviewed the installation instructions. Any help?

You need to make sure that you have an active internet connection from your ISP (Internet Service Provider). What connection are you using, CABLE or DSL ?

When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.

When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.

Your AirPort Extreme supports WPA.
WEP is outdated and considered fairly useless, so use WPA.
Be sure you are using AirPort Utility 5.6. If you are not running Lion then use AirPort Utility 5.5.3.
AirPort Utility 6.0 cannot administer 802.11b/g base stations.

HT3986 Hello, as a extremely advanced user, after trying to install Targus AMB09EU on 64bit Windows 7, I have reached a stage where no new Bluetooth devices are detected, while Apple wireless kb+mouse still work perfectly, can somebody give any input plea

The device I tried to install was Targus AMB09EU mouse.
The end result was losing ability to detect any new Bluetooth devices, although Apple kb+mouse works.
Any input would be appreciated.

This really is a question best aimed at Microsoft and Targus user forums, you may not get an answer here.

Im Trying to install my wireless keyboard to my Mac n I can't?

I have a Mac n im Trying to install a wierless keyboard but i cant?

Perhaps this article can be of assistance.
iTunes Store: My credit card's security code or zip code does not match my bank's records
B-rock

I can not use my mouse or keyboard when I am trying to install windows via boot camp

Please can you help!
I can not use my mouse or keyboard when I am trying to install windows via boot camp

Starting a couple of days ago my mouse and keyboard stopped working suddenly.
How are they connected? In my case they are wireless and their receiver is plugged into my USB hub. After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it. My fix was to
plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.) Once I had normal access into my machine again I used Device Manager to remove all USB controller and
hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going. Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized.
If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK. I have no idea why updates have such a catastrophic effect for USB devices.
Robert Aldwinckle

Trying to install SKYPE please help.

I am trying to get skype on my BB STORM, I have looked high and low and understand that the wireless co. doesn't support or want these apps cause they loose out.
I have tried ISKOOT and looked for and found a skype prgm it's a .JAD file, that said it was for the storm but when I try and use the desktop mgr it says not supported, maybe I have the wrong one or just trying to install it wrong.
Thanks for any help.
I need this to make cheaper calls to my brother in law over in england.
what would be cool is an app for remote desktop, like remote assistance. where you could access your home pc and controll it like you were sitting at it. One day.............................

RealPlayer SP for Mac from:
http://www.real.com/realplayer/mac
(Make sure you get the right version. I use version 12.0.0)
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 is for Snow Leopard onwards.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Google Chrome is not compatible with a PPC Mac, it only runs on an Intel mac. No geat loss IMO!

Stuck on grey screen trying to install 10.5

Hi,
A friend of mine has been given an eMac 1ghz running 10.4. She connects to the internet by a wireless 3G dongle but the installation software requires a more recent version of java than is installed on the eMac and needs to download an update but is not able to use the internet so she's in a catch 22 situation.
I decided the best option would be to install 10.5 as the eMac appears to have the correct spec (just!) but have so far been unable to. I have tried to install from both a full retail dvd and a copy on a FireWire drive. On both occasions the disc mounts on the desktop but once the emac is restarted to begin installation the discs spin and I get to the grey apple screen with the spinning timer but the it just gets stuck. It is exactly the same for both the dvd and the FireWire drive.
There is nothing plugged in except the keyboard and mouse. I wondered if it could be a firmware problem but again I cannot check that as it can't get on-line. I have replaced the pram battery and reset it. I wondered if it could be a hard drive problem and will take my old 10.3 discs round next time to see whether I can boot from that disc and check the hard drive.
Does anyone have any ideas? I can always download stuff at my house and take it to hers on a disc as long as I know what to download.
Any help is gratefully received.

Is the Leopard 10.5 DVD a retail full-install version, or one that shipped
with a different Macintosh computer? It has to be a retail version to work.
Some eMac models with lesser than ideal graphic processors are not
best suited to run Leopard; but some users have made it go anyway.
The usual progression of Java updates, continue from whatever version
the OS X has in it currently and builds with additional downloads. So, if
you can get the Standalone downloads in the correct order as needed
from Apple Support Downloads (right now I don't have a precise list)
for the OS X version you are contemplating the need, it could work.
You should stay at Tiger 10.4 (.11) if the computer had been working
OK, and make sure the hardware is in good condition and has as
much RAM installed as the computer supports; then be certain the
Leopard install DVD is proper and did not come from a different Mac.
Leopard requires 512MB of RAM to 'bare-bones' work; and plenty of
free space available for the system and apps to use, since this will
rely on Virtual Memory (space on hard drive used automatically by
the OS X as virtual RAM along with all the chip RAM you can supply)
in order for an OS X system to work fairly well. At least 1GB RAM, too.
{There probably are other aspects of the question and ways of interpreting
them; and I am being interrupted here at the precise times I need to think
about the question I'm writing to... but I can't get the annoyance to stop.}
So hopefully you can check and test the computer before upgrading the OS
and have the correct Leopard 10.5 disc if you go that way; and enough RAM
plus a large enough hard disk drive with alot of empty space available.
Which model eMac is the one in question? 700/800/1.0/1.25/1.42?
PS: *A list of progressive Java updates* in Mac OS X 10.4 (.11) looks like this:
The list in my 10.4.11 system in use now, looks like this:
J2SE50Release4.pkg
J2SE50Release3.pkg
JavaForMacOSX10.4Release9.pkg
JavaForMacOSX10.4Release8.pkg
JavaForMacOSX10.4Release7.pkg
JavaForMacOSX10.4Release6.pkg
JavaForMacOSX10.4Release5.pkg
Java131and142Release2.pkg
Java.pkg
(And the numbers may reflect the date of installation
since their order is not totally numerical. Among the
updates, there may be some related to the Security
Updates. Be sure to install the Last security update
and it should include many of the older secure items.)
• Apple Support Downloads - Mac OS Components:
http://support.apple.com/downloads/#macoscomponents
Apple Support can also be searched.
+{ edited to add this last pile of words }+
Good luck & happy computing!

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description:          Dell Wireless 1397 WLAN Mini-Card
IP Address:          192.168.0.118
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Tue Apr 17 16:59:28 2012
Lease Expires:          Wed Apr 18 16:59:28 2012
DNS Servers:          192.168.20.254
                    192.168.30.217
Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description:          Broadcom NetLink (TM) Gigabit Ethernet
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Trying to install multiple All in One Printers on new laptop

Got a new HP Envy laptop running Windows 8.1. Replacing old HP running XP. Trying to install two HP All in One printers on my home wireless network HP 6500 E709n and a HP 7410. I am stuck in an infinte loop using the HP Print and Scan Doctor. I load up one printer Driver using the downloads on the website. When I go to load the other printer, the system won't let me continue until I uninstall the previous printer driver and accessy software.
Anyone know how to get around it?

Hello again,
Thanks for getting back to me!
Next, I would suggest uninstalling all of the printer software on your computer, performing a clean boot and then reinstalling the OJ 7410 first and then the OJ 6500. Here are the steps and links in order for you.
Uninstalling the Printer Software
Restart the PC
How to perform a clean boot in Windows
Restart the PC
Download and Install - HP Officejet 7410 All-in-One Printer
Download and Install - HP Officejet 6500 Wireless All-in-One Printer - E709n
I hope this works for you!
Happy Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

M72z - trying to install Wireless-N 2230 :/

Similar Messages

Maybe you are looking for