M7690N Installed a Galaxy GT520 now no sound from audio jacks

I have a HP M7690N that i just installed a Galaxy GT520 video card in and now i cant get any audio from any of my audio jacks. Though i do get audio from the HDMI. My system is a M7690N running Windows 7 and windows XP (dual boot). also the Realtek audo card dose not show up in device manager on XP or win 7.

Hi,
Please close this, use other post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/Monitor/message-id/21590
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

No sound from audio jack and screen doesn't dim, using BootCamp 3.1 in Win7

I'm using BootCamp 3.1 in Windows 7 on a MacBook Pro (13-inch, Mid 2009)
When I plug in headphones I get no output sound; however, I do get sound from the main speakers (regardless of the headphones being connected or not). Side note, there is no red light coming from the audio jack.
Another problem that I'm having: when I try to dim the display, using either F1 or F2, or from the BootCamp Control Panel in the Dim tab, it doesn't dim.
I've saw in Apple's Support Download section that there is "Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)", but as you can see it's "Mid 2010" and not "Mid 2009".
However, for the sake of exhausting everything I can think of before posting here, I tried to download and install it. Only to get an error that states "The patch upgrade cannot be installed by the Windows Installer service because the program to be updated may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct update patch."
Any suggestions?

the G5 is not en intel based cpu so people here may not know too much about the hardware setup but
people here
https://discussions.apple.com/community/desktop_computers/imac_powerpc
would own the same type of computer as you do any that may result in them having more insight into what could be the issue

No sound from audio jack and screen doesn't dim, using BootCamp 3.1 in W7

I'm using BootCamp 3.1 in Windows 7 on a MacBook Pro (13-inch, Mid 2009)
When I plug in headphones I get no output sound; however, I do get sound from the main speakers (regardless of the headphones being connected or not). Side note, there is no red light coming from the audio jack.
Another problem that I'm having: when I try to dim the display, using either F1 or F2, or from the BootCamp Control Panel in the Dim tab, it doesn't dim.
I've saw in Apple's Support Download section that there is "Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)", but as you can see it's "Mid 2010" and not "Mid 2009".
However, for the sake of exhausting everything I can think of before posting here, I tried to download and install it. Only to get an error that states "The patch upgrade cannot be installed by the Windows Installer service because the program to be updated may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct update patch."
Any suggestions?

the G5 is not en intel based cpu so people here may not know too much about the hardware setup but
people here
https://discussions.apple.com/community/desktop_computers/imac_powerpc
would own the same type of computer as you do any that may result in them having more insight into what could be the issue

Bad sound from audio jack

please help - i just got the mini 1000 vivienne tam, which i love, but the audio output from the headphone jack is terrible. it sounds like i'm listening to a cassette in my 1983 boombox. i'm running windows xp. i've seen solutions for those on linux, but nothing helpful for xp. please help! i have a great bose wave radio that's going to poor use as i listen to all music from my notebook.
hp person, random person, anyone, please save me!
(and please explain in very very simple nontechy terms)
thank you!

omg, it worked it worked! thank you so much. i spent an hour online with tech support yesterday and didn't get it fixed. but this worked! may blessings rain down upon your house.

HP pavilion g6 no sound from audio jack or usb

Hi, I normally use my laptop with some headphones on the headphone jack, but just a few minutes ago my headphone jack stopped working and all the sound came out of the internal speakers. When I connected my USB headset on it didnt work either and all the sound stil comes from the speakers. The troubeshooter couldnt find any problems. Plz help

Your iPod will require a replacement logic board. A chip necessary for audio production has gone faulty and since it's integrated to your mainboard, it will require replacement. Oftentimes you can squeeze hard along the bottom front edges of the device and failtly get partial sound. This is another key sign of this damage.

U350 Ideapad crappy sound from audio jack

Hi,
Hopefully someone can help me.
I just bougth a U350 Ideapad and everythig works perfect, but when I plug my headphones I can hear everthing but it sounds terribly, like an eco. If I plug the headphones slowly but not all the way in I can hear the sound perfect but they dont stay there and If I press all the way down the sound is terrible.
What can I do?
Thanks
Gabriel

Hi Jimmys_51,
Take a look at this document and let me know if the troubleshooting steps help resolve your issue.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Audigy 2 zs - moved pc from one room to another and now no sound from speakers (headphones

As the title says,
I just completed moving my pc from one room to another. Low and behold I get no sound from speakers (just some stereo speakers with powered sub). I do get audio out of the headphones (fully disconnect headphones from front panel when attempting to get sound from speakers). I know this probably points to a faulty speaker setup but that's pretty straight forward and looks to be fine.
Anyone encounter this problem before or have any suggestions?
Thanks!

Mr. Jefferson, Thanks for the quick response!
A mystery! Usually, it's easiest to have FiOS patched into your home's cable TV wiring, so I'm curious why you don't have a coax router that provides you with the ethernet (internet) jacks. Some questions:
Do you watch TV from some other source (like satellite or cable TV) but are using FiOS only for Internet?
I have both fios tv and internet
You said 2 cables are going from your router to a box in the wall. What are the 2 ports labeled on the router?
One of them is just the main "internet" port I guess you could say while the other is just one of the ports labeled 1-4 (plugged into #2 I believe)
Is there any labeling on the jacks on the wall box? On the other box in your room?
On the wall box in this room theres labeling on the jacks on the wall box that says IN and OUT (in marker), while in my room there's the same box but with only ONE, unlabeled jack (I think there's supposed to be another jack but it seems to be closed/sealed off)
Do you know where the Internet jacks connect to? Like a patch panel or box somewhere in your garage or near where your FiOS/cable tv/phone service is? Somewhere these cables have to terminate.
I believe they somehow connect to this box in my garage (did some research and I believe it's called the ONT? and there's another box below it which I believe is the battery)
Hope this info helps!

No sound from headphone jack on 2011 imac 27"

I usually use the headphone jack on the back of my iMac to drive studio speakers thru a mixing console. I recently unplugged the cable from that jack to hear something through the internal iMac speakers, which worked fine, and now that I've plugged the cable back in, I can't get the external speakers to work. In System Preferences/Sound/Output, the display vacillates between "Internal speakers" and "headphones" when I jiggle the cable in the headphone jack, which leads me to believe that the output jack has become damaged. That would mean taking it in for replacement, right? Or does Apple throw the baby away with the bathwater and just replace the whole computer, rather than replacing the jack itself?
In any event, does anyone have any ideas for me from what I just posted? Thanks very much.

Hi all again
After reading through a few other posts here I decided to check "System Preferences." After doing this I discovered that when the headphones are plugged in it set to mute. Not sure how that happened, as I nevered changed anything and I am only one using this computer. I guess it does not matter, as long as the problem is fixed.
Thanks
Michael

No sound from both jack and speakers of my hp pavilion laptop

I'm not getting any sound from the speakers or headphones on my HP 2000 Note Book PC. When I try to test the speakers I get an error message saying, "The device is being used by other application.Please close any devices that are playing audio to this device and then try again".

Hi,
Can you post back with the following details.
The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

No sound from audio speaker or headphone jack

Hello all i bought a HP Probook 4535s from a friend and im not getting any sound from the speakers or headphone jacks. I have flashed the BIOS to the F.41 and this didin't fix the problem. I also deactivated speakers in the BIO settings and re enabled them and this still didn't fix the job. I also replaced the speakers themselfs. Any ideas would be appriciated Thanks

Hi @cblake118 ,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
http://h30499.www3.hp.com/hpeb/
I work for HP

No sound from audio loop

Im using logic 9 and when I drag an audio loop into the arrange window I get sound, but if I drag any other audio loops after that, the only sound I get on the tracks are the sound from the first loop I used. All midi loops works fine. Any answers???
Thx

nealeh
I am not involved to any great extent with iTunes or its music although my recent iPod has drawn me in that direction.
So reflecting on your observations regarding iTunes m4a and m4p...
a. Everything that I have read so far says that m4a and m4p are the same except that the m4p includes the DRM restrictions (or it did until iTunes did away with DRM for its music). Further these file extensions seem to wrap AAC audio compression.
b. Premiere Elements (many versions) seems to have been hit with many users issues relating to the use of iTunes music in their creations. My recollection is that these users usually presented with .m4a music and were directed to a variety of methods for converting the .m4a to .mp3. The rationale behind the suggestions appear to be go to the protected music aspect of the music rather than a file extension or audio compression incompatibility issue. All of these conversions rightly or wrongly seemed to be wrapped with the protect issue. Converting the .m4a to .mp3 worked for most. That was their bottom line. Whether the .m4a (in spite of its file extension) had DMR causing the issue or format incompatibility causing it never seemed to be defined.
c. In fact, there are numerous articles online that address removal of DRM from iTunes m4a, AAC, and m4p.
d. But, since iTunes appears to have removed DRM from its music, the matter dissolves.
e. Prior to the iTunes' removal of the DRM, it is not clear to me just what iTunes music had DRM in spite of its file extension.
ATR

No sound on Audio jack p55-A5312, win 8.1

Hi
I have a toshiba p55-A5312, i have full sound output on ubuntu both speakers and audio jack but when i updated to win 8.1 the 3.5 mm audio jack doesn't output sound any more! when using windows! the toshiba update utility shows that i should update my driver to be used with win 8.1 which is 16 mb as it shows but it just hangs there forever!
i went to the website and i chose my model then sound then IDT driver and guess what the link is broken! no wonder the app hanged up forever can't download it!
and since IDT doesn't give download links to users i have to wait till some engineering guy realizes this and updates the link as Toshiba doesn't offer any sort of online chat support or customer service
here is the broken driver link : http://cdgenp01.csd.toshiba.com/content/support/downloads/tca0104800e.exe
i hope someone from Toshiba spots it out!

little update i left the toshiba utility to update overnight and it didn't work too !!!
the funniest part is that i can get sound normally from the hobbyists who create backdoor drivers on linux

No Sound From Headphone Jack, Only Internal Speakers working in Macbook Pro A1278

Hello, the internal speakers of Macbook Pro A1278 OSX 10.7.5 are working perfectly, but no sound from headphones or external speakers when plugged in. Headphones/speakers recognized when plugged in, shown by System Preferences/Sound, and since the sound stops from internal speakers when headphones/speakers are plugged in. No red light seen coming from headphone jack, as I read in other posts. The problem began after a cable was connected between computer and stereo system. Maybe overloaded the sound card and burned out a connection? Wondering if you think that the sound card needs to be replaced or is there another solution possible? Thank you.

Hello JohnBoarkman,
Welcome to the Apple Support Communities!
I understand that you hear no sound from your accessory when you connect to your headphone jack. My first troubleshooting suggestion for this situation would be resetting the NVRAM on your Mac. Please use the instructions in the attached article to complete this process and let me know if the issue continues.
How to Reset NVRAM on your Mac - Apple Support
Have a great day,
Joe

Removing "phone" sound from audio made over the phone

I'm producing a documentary and want to get some sound bites from a range of people all over the country The only way to get them is by phone. Does anybody have filter info that will let me remove the "phone" sound from these clips?

A phone sounds like a phone because it's already filtered. A lot of both the high and low frequency information is removed from the audio signal on a phone line. Once it's removed there's not really a way to get it back. You can try to reduce the most offensive "tinny" frequencies with an EQ, but you won't be able to add the full frequency range back in.

Terrible, tinny sound from headphone jack. Satellite

I've looked at all the settings I could find, but the sound from iTunes, out the headphone jack, to a small stereo is horribly tinny. I can plug the exact same wire into my phone which has great sound, so it's sth about the sound card ,not the rest of my system. I am not talking about the speakers

Hello JohnBoarkman,
Welcome to the Apple Support Communities!
I understand that you hear no sound from your accessory when you connect to your headphone jack. My first troubleshooting suggestion for this situation would be resetting the NVRAM on your Mac. Please use the instructions in the attached article to complete this process and let me know if the issue continues.
How to Reset NVRAM on your Mac - Apple Support
Have a great day,
Joe

M7690N Installed a Galaxy GT520 now no sound from audio jacks

Similar Messages

Maybe you are looking for