M8 140 Acct assgt 01 for order item 45041838 00003 does not exist

Hi experts,
when i am trying to create invoice from BAPI_INCOMINGINVOICE_CREATE ii am getting the following error meesage for multi account assignment for non service based invoice ,service items.
error message: M8 140 Acct assgt 01 for order item 45041838 00003 does not exist
Please advice
Thanks & Regards,
Narasimha

Hi,
Please check the SAP note number : 810917.
Regards,

Similar Messages

Sales order stock 110000193 000050 does not exist

Hi Friends,
I have a problam in Confirmation of Production order against sales order. Every time I confirm the production order system give an error message Sales order stock 110000193 000050 does not exist.
where I check the material in mb52 transaction , the stock shows on that material.
Please give solution .
thanks in advance.
Ajit Sharma

Hi,
It seems you have activated back flush some or all the components.
In MTOscenario, system looks for sales order stock for all the components.
Since sales order stock is not available with your system the message.
Try with movement type 412E in MB1b to transfer components from U/R to sales order stock.system propmts you to give sales order number Pl. provide there & carry out transactuion.
Then the system will pick up the stock & post.
Regards,
R.Brahmankar

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

For object RF_BELEG number range does not exist

Hi,
while doing PGI, i get an error For Object RF_BELEG ,number range does not exist in company code ABCD. Where do i create the number range for this. I tried with FBN1 but not useful.
" Diagnosis says, the database table NRIV has the delivery class as C. Make chages in customizing. "
what could be the reason for this error? can anyone help me to fix this error.
i tried to fix it through transaction code 'SNRO' and 'OBA7' but in vain
can anyone help me out

Try Extending the same in VN01 , and assigning it to your relevant document
Cheers

Getting status row for item '' activity id '' does not exist

Hi,
Need your help.
Create a custom workflow SAMPRREQ. Its having following processes.
1. Start Process
2. Respond Notification.
3. Function to update Table with the responded value.
4. End process.
After lauching the workflow, Notification send to the performer. Open the notification. When approver click the any of the result value (approve, reject, onhold) system giving followign message.
3101: Status row for item 'SAMPRREQ/20130206161924', activity ID '242956' does not exist.
I have seen some threads in the forums and bounce the database , purge the item type completly. But, still getting the error.
Regards/Prasanth

Sosa,
When i run the wfstat nothing wrong in the info. unable to find the issue.
But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
When i comment these two dml ( update to header status & insert into events ) there is no error.
Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
Regards/Prasanth

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

I have an "old" Apple ID set up 13 years ago. Apple has now gone to using email address as the apple ID. I have apps to update and they ask for old ID. it does not exist. How can I get the ID on the app changed to the new apple ID

I set up an apple id many years ago when itunes was established. Within the past year or so, Apple has changed to using email address as user id. My problem is that I have many applications that I can not update due to the fact that it is asking for the password of the old ID. It does not exist anymore. Any ideas on how to get the new apple id associated with the application without deleting the application. Several of these apps I purchased.

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

How to delete an iCloud account and turnoff Find my Phone for a email address that does not exist

I have switched my itunes account to a new email address but the iCloud account is still registered to the old email account which I can no longer access.
If I go to Settings>iCloud it requests my Apple ID password for the old email account but as this account does not exsist it does not accept the "old" password. it will not let me delete the account without turning off the Find My Phone app which aslo needs the old password.
A related probelm is none of my apps will update as they are on the old account hence the need to delete the iCloud email account and create the new iCloud with the new email sign on address.

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address (you won't need to verify it) and save the change. You should now be able to use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. After turning it off you can delete the account, go back change your ID back to the way it was again.

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

Problem with PGI - Sales Order stock does not exist

Hi
I created order 58161 with 1 item line (10).
Did a delivery and created a Picking Request (which i released via transaction VL08).
When i try to do PGI i get following message:
Sales order stock 58161 000010 does not exist.
I have previously done a similar order with same material and so on and it went through the system without a hitch.
I have checked the other threads, is this where i have to use MB1B and mov.type 412 E to move unrestricted goods to sales order stock?
Thx
RM

Hi,
first u check stock at tcode:MMBE for ur material ,plant and storage location.If u dont have stock than create stock through goods receipt:mb1c.[movement type 501 e,enter ur sales order no.,item no.],I think it will solve than

COGI Error-Sales Order Stock does not exist

there are many item numbers that appearing in COGI for the "Movement Type" "261." and error text as "Sales order stock 330000172 000010 does not exist".
what might be the problem?
how can i fix this?
could anyone help plz

hi
as your scenario is MTO , when you run MRP for sale order all the componnets under finished product will get DEP req against the sale order,
so at the time of goods issue system check the stock for a component agaisnt the sale order. even the stock is vaible in unrestricted.
1.check for the component when you run MRP system might generated Purchase req(in case external procurment) or planned order(in case both procuremtn) you need to procure ord produce , so when you do GR for them stock will be against the sale order.
or
2.you can bring sale order stock by doing MB1B - using movement type 411 E.(transfering stock Unresticte stock to sale order stock)
-ashok

Link Reports -item does not exists on this page

I have two tables Person table with Primary Key of PersonID, and Person_Qualification Table with a FK of Person_ID.
I have a report for each table. I have created a report on the Person Table(Page 3000) with a link column to the Person Qualification Report (Page 3119).
In the link column I created in the person report I have my parameters set as P3000_PersonID and #Person_ID# as field to populate the URL with, and the target page as 3119.
However anytime I click this link that takes me to the PersonQualification report I get an error stating the Item P3000_Person ID does not exists on this page (3119).
I have linked a form and report together before, but not two reports.
I want the person qualification report to be only for the personID that was clicked on.
I tried adding P3000_PersonID to the query in the person_qualification page I.E. where PersonID=:P3000_PersonID but I still get the item P3000_Person ID does not exists on this page or something to this effect.
Thanks

Hello gtjr,
You need to define an item (usually hidden) on page 3119 to hold the person ID and use that in your second report's query.
Then in the column link for the first report, specify this new item to be set to the person ID linked.
The reason for the error is you're telling ApEx to set an item p3000_person_id on page 3119, but that item doesn't exist on page 3119.
Hope this helps,
John
Please remember to reward helpful or correct responses. :-)

Check for Rentals on Apple TV does not work

I have rented many movies in the past using Apple TV. I have not had a problem until now, right after I just updated my Apple TV software to the latest software v6.0 (6646.65).
Last night (9/28) I rented World War Z. Roughly 20 minutes into the movie, I stopped the move by hitting the menu button. This exited me from the movie and back to the movies rentals screen. I then rented another movie only a few minutes after exiting the first. I had no problem renting the second movie as I did not exit the movie once the streaming started.
A few hours later I went back to watch the move by selecting the movie. The rental option was still availabe. By selecting to rent the movie again and then selecting "Rent and watch now", the system told me I had already rented the movie and I should go to Settings->Downloads->Check for Downloads. This options does NOT exist in the settings menu; however, I found a similar option under iTunes Store->Check for Rentals.
This "Check for Rentals" option does absolutely nothing - or it doesn't show anything if it is doing something behind the scenes. It just shows the spinning lines. I waited all night for something to happen. I restarted my router and modem to make sure there was nothing wrong with networking. Again, I had just watched another movie all the way through with no problems. I sent Apple Support an email with my issue and they refunded my $4.99 for the movie rental.
So, tonight (9/29), I still wanted to watch the movie and I wanted to see if it would work. I went to the movie, selected to rent the movie and it gave me an optionsaying that I had already rented the movie and asking me if I wanted to rent it again. I selected to rent it again. I was able to watch the movie all the way through with no problem.
I ended the movie during the credits by hitting the menu button. I immediately went back to the movie to see if I could continue the movie since I should be able to watch this movie in the next 24 hours. The same situation happened again. I was told I could not rent the movie again, but to go to Settings->Download->Check for downloads. The "Check for Rentals" is doing the same thing.
So, my question is how do I fix this or is there even a fix for this situation? If I can't watch a movie without the fear of exiting the movie for whatever reason and not be able to return to the rented movie, I will not continue to rent movies from Apple TV. I enjoy renting them through Apple TV, but I definitely have multiple options (i.e. XBox Live, PS Network/Amazon, Redbox, etc.). I really want to understand why this is happening and if it's going to be fixed.
Thank you for any feedback!

I have been working on this project for just one day. Other people have suggested logging out and then logging back in. I have had sucsess with this sollution today.
Check this thread as well.
https://discussions.apple.com/thread/5360214?start=0&tstart=0

Tax code O1 does not exist for jurisdiction code CNT5K2L60

Hi experts,
When I tried to create billing, i got this error msg:
Tax code O1 does not exist for jurisdiction code CNT5K2L60
Tax code O1 should be taxable.
I know nothing about tax config in SAP so please tell me what to do and the correct t-code for this? Thanks!

Hello,
Kindly follow the following link, you will get some hint to tax config required for your error:
Tax code does not exist for jurisdiction code
Tax code EA does not exist for jurisdiction code QC000000
Or check following SAP Notes
327431 - FF718: Tax code and jurisdiction code.
887899 - TAX. "Tax code xx does not exist for jurisdiction code"
418582 - Transport of tax codes with tax jurisdiction codes
Thanks & Regards
JP

No range for trans/event type WA in year 2011 does not exist

Hi, All Gurus
while posting goods in MB1C,getting error 'No range for trans/event type WA in year 2011 does not exist'
while doing PGI,getting error 'No range for trans/event type WL does not exist'.I'm getting trained in IDES system.
Plz help me..
From
MVR

Hello,
And welcome to SAP SDN
System asking Number range for trans./event type WA for year 2011, as it not maintain in the system.
Now 1st set u201CWAu201D document type for material document & then u201CWAu201D document type for accounting document
Set for WA document type for material document
Use TCode: OMBT
In the Menu Click Group - maintain - again click Group-insert - Number Range Group Text (new material document)
& then enter
Year_From Number __ To Number.
2011_100000000____ 199999999
And now
Double click "WA"
and select check box of your "Number Range Group text of new material document
"and click Element/Group in the Application Bar ( you can see WA is assigned to Number Range Group text ) and Save.
Now use t.code: OMBA
Click u201CGoods Receipt Document Typeu201D
Next screen assign u201CWAu201D document type to t.code MB1C and save.
Set for WA document type for accounting document
Again Use t.code: OMBA
Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval.
Now in next screen, click u201Cinsert intervalu201D
& then enter
Number range number__Year____From Number____To Number.
10__________________2011____200000000____ 299999999
And save.
Now again use t.code: OMBA
Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWAu201D and you will have new screen and enter Number range u201C10u201D and save.
Similarly for WL
In t.code: OMBA check under automatic movements doc type for TCode VL01, VL01N, VL01NO, VL02,,VL02N,,VL03N, VL07, VL08, VL09, VL32, VL32N,,VL33N, VLMOVE, etc
Now, Set for WL document type for accounting document
Again Use t.code: OMBA
Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval.
Now in next screen, click u201Cinsert intervalu201D
& then enter
Number range number__Year____From Number____To Number.
20__________________2011____200000000____ 299999999
And save.
Now again use t.code: OMBA
Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWLu201D and you will have new screen and enter Number range u201C10u201D and save.
If you still face the any issue. Do revert back
Thanks & Regards
JP
NOTE KINDLY SEARCH FOR THE ERROR< BEFORE POSTING QUERY ON SDN

M8 140 Acct assgt 01 for order item 45041838 00003 does not exist

Similar Messages

Maybe you are looking for