M83 dual monitor vga black screen

I have a thinckentre M83 configuration with dual monitors.  The system has been operating fine until last week, post a Windows 8.1 update.  Now the analog monitor is in a sleep state and I can't get it to be recognized by the system.  I have checked all the drivers and everything is up to date.  Need assistance.

Since the system is still under warranty I believe, you can contact Lenovo support. They shuld provide troubleshooting assistance.
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

Similar Messages

  • Satellite A100-646 and external monitor shows black screen

    Hello to everybody,
    I have a similar problem with A100-646 (bought in Italy). Laptop's LCD and external monitor shows black screen but system boots without other problem. When laptop is not used for a long time (half a year) it work for one week without any problem.
    Unfortunately, there is no proper service in a place where I live. Perhaps, there is a problem with power supply.
    Is there other idea? Does anybody have a service manual? ([email protected])

    It is not easy to find shop where you can order original and new hardware components.
    Best source for such parts is definitely eBay where you can buy used but well working components.
    Upgrade? You must know that upgrade on mobile computers is not the same as on desktops. Cooling possibilities are not the best and each notebook model has optimized cooling system for original parts. So new graphic card can be more powerful and produce more heat and it is definitely not good for your notebook. So best thing you can do is to replace it with original part.

  • Vga black screen

    I have a HP Pavillion P6751c with a radon hd 4200 and I  have two monitor a Hp 2311x and a asus vh236h and I want to make it dual monitor (I've done it before) the hp 2311x monitor is connected with a dvi and the asus is connected with a vga. before i had both working perfectly., but suddenly my asus monitor became too dark or just a black screen. so I try updating the driver, changing the cable and changing to another monitor, but nothing change. but dvi is doing ok and nothing wrong only the vga is wrong. How do i fix it?

    While in the area discussed in my previous post, when the detect button is clicked, did the white number show on the monitor that is dark, even faintly?  If no, then perhaps try that monitor on another PC or try a different monitor on the PC in question's VGA port.  I suspect the monitor or PC has a defective VGA port.  If you find it is the PC fault, try checking the BIOS settings to see if the onboard graphics is enabled.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • External monitor shows black screen

    Hey fella's,
    I have an early 2011, 11'' Macbook Pro running Yosemite 10.10.1, which I've been hooking up to an IPS226 LG Flatron external monitor.
    It did a number on me last week: the external monitor decided to show only a completely black screen. Like it's in power saving mode, except it isn't: the Mac recognises its existence, the laptop's monitor becomes a secondary screen. When I unplug the external monitor, it says "switching to power saving mode" and then goes black again...
    Here's the kicker: I tried hooking it up to other laptops using different cables (mine is HDMI, so I tried VGA to another laptop) - worked like a charm. Then, when I plugged mine back in, also worked! Until today. Now it's happened again. What sorcery is this?
    Thanks!

    Hi Polindrom,
    To troubleshoot this issue where the external display you're using with your Mac appears blank, please follow the directions outlined below.
    No video or no signal, image distortion, "snow," or flickering
    Check connections
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Dual monitor goes black on skype call

    Ever since i got a dual minitor, when i call someone on skype or i recieve a call , both of my screens  go black, the only way to fix it is to unplug my monitors and plug them back in .  If i do that , then i dont get any black screens until the next computer restart
    Any help ? 
    PS: i already have all the latest drivers and latest skype

    Thanks, Stu.  Have you heard of this problem? One thing I hadn't tried was plugging it directly into the wall outlet, so now I'm trying that.  I did have it plugged into a surge protector strip so now I'm crossing my fingers that was the problem.  Last night it went black about 10 times.  I don't really want to return it if I don't absolutely have to; I have lots of stuff on it now, plus I don't want to take a chance that amazon.com will charge me a restocking fee if they don't find something wrong with it (although it's still under the 30 day return policy).   

  • Dual monitor problem (2nd screen black, shows only "_")

    Hi, im trying to configure dual screen, tested lot of configs but stuck with this problem: second monitor shows only "_" in top-left corrnerm.
    My current Xorg is:
    Section "Monitor"
    Identifier "LewyMonitor"
    Option "DPMS"
    Option "Enable" "true"
    EndSection
    Section "Monitor"
    Identifier "PrawyMonitor"
    Option "DPMS"
    Option "Enable" "true"
    EndSection
    Section "Device"
    Identifier "LewaKarta"
    BusID "PCI:0:9:0"
    Driver "mach64"
    Screen 0
    EndSection
    Section "Device"
    Identifier "PrawaKarta"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "LewyEkran"
    Device "LewaKarta"
    Monitor "LewyMonitor"
    DefaultDepth 15
    EndSection
    Section "Screen"
    Identifier "PrawyEkran"
    Device "PrawaKarta"
    Monitor "PrawyMonitor"
    DefaultDepth 24
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "LewyEkran" 0 0
    Screen 1 "PrawyEkran" RightOf "LewyEkran"
    EndSection
    Im using:
    00:09.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a)
    01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
    Xorg.0.log:
    [ 2445.373]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 2445.373]
    X.Org X Server 1.8.1.902 (1.8.2 RC 2)
    Release Date: 2010-06-21
    [ 2445.373] X Protocol Version 11, Revision 0
    [ 2445.373] Build Operating System: Linux 2.6.34-ARCH i686
    [ 2445.373] Current Operating System: Linux myhost 2.6.34-ARCH #1 SMP PREEMPT Tue Aug 10 21:38:22 CEST 2010 i686
    [ 2445.374] Kernel command line: root=/dev/disk/by-uuid/cd43eabd-ff42-4d85-be67-b98bd0d6e27e ro
    [ 2445.374] Build Date: 21 June 2010 11:54:27AM
    [ 2445.374]
    [ 2445.374] Current version of pixman: 0.18.2
    [ 2445.374] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2445.374] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2445.374] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 27 04:01:41 2003
    [ 2445.374] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2445.374] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2445.375] (==) ServerLayout "X.org Configured"
    [ 2445.375] (**) |-->Screen "LewyEkran" (0)
    [ 2445.375] (**) | |-->Monitor "LewyMonitor"
    [ 2445.376] (**) | |-->Device "LewaKarta"
    [ 2445.376] (**) |-->Screen "PrawyEkran" (1)
    [ 2445.376] (**) | |-->Monitor "PrawyMonitor"
    [ 2445.376] (**) | |-->Device "PrawaKarta"
    [ 2445.398] (==) Automatically adding devices
    [ 2445.398] (==) Automatically enabling devices
    [ 2445.398] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2445.398] Entry deleted from font path.
    [ 2445.398] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2445.398] Entry deleted from font path.
    [ 2445.398] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 2445.398] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2445.398] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2445.398] (II) Loader magic: 0x81e9d00
    [ 2445.398] (II) Module ABI versions:
    [ 2445.398] X.Org ANSI C Emulation: 0.4
    [ 2445.398] X.Org Video Driver: 7.0
    [ 2445.399] X.Org XInput driver : 9.0
    [ 2445.399] X.Org Server Extension : 3.0
    [ 2445.419] (--) PCI: (0:0:9:0) 1002:4755:1002:4755 ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] rev 154, Mem @ 0xcc000000/16777216, 0xcfffd000/4096, I/O @ 0x0000d800/256, BIOS @ 0x????????/131072
    [ 2445.437] (--) PCI:*(0:1:0:0) 10de:0110:0000:0000 nVidia Corporation NV11 [GeForce2 MX/MX 400] rev 161, Mem @ 0xce000000/16777216, 0xc0000000/134217728, BIOS @ 0x????????/65536
    [ 2445.437] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2445.437] (II) LoadModule: "extmod"
    [ 2445.438] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2445.438] (II) Module extmod: vendor="X.Org Foundation"
    [ 2445.438] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.438] Module class: X.Org Server Extension
    [ 2445.438] ABI class: X.Org Server Extension, version 3.0
    [ 2445.438] (II) Loading extension MIT-SCREEN-SAVER
    [ 2445.438] (II) Loading extension XFree86-VidModeExtension
    [ 2445.438] (II) Loading extension XFree86-DGA
    [ 2445.438] (II) Loading extension DPMS
    [ 2445.438] (II) Loading extension XVideo
    [ 2445.438] (II) Loading extension XVideo-MotionCompensation
    [ 2445.438] (II) Loading extension X-Resource
    [ 2445.439] (II) LoadModule: "dbe"
    [ 2445.439] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2445.439] (II) Module dbe: vendor="X.Org Foundation"
    [ 2445.439] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.439] Module class: X.Org Server Extension
    [ 2445.439] ABI class: X.Org Server Extension, version 3.0
    [ 2445.439] (II) Loading extension DOUBLE-BUFFER
    [ 2445.439] (II) LoadModule: "glx"
    [ 2445.439] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2445.440] (II) Module glx: vendor="X.Org Foundation"
    [ 2445.440] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.440] ABI class: X.Org Server Extension, version 3.0
    [ 2445.440] (==) AIGLX enabled
    [ 2445.440] (II) Loading extension GLX
    [ 2445.440] (II) LoadModule: "record"
    [ 2445.440] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2445.440] (II) Module record: vendor="X.Org Foundation"
    [ 2445.440] compiled for 1.8.1.902, module version = 1.13.0
    [ 2445.441] Module class: X.Org Server Extension
    [ 2445.441] ABI class: X.Org Server Extension, version 3.0
    [ 2445.441] (II) Loading extension RECORD
    [ 2445.441] (II) LoadModule: "dri"
    [ 2445.441] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2445.441] (II) Module dri: vendor="X.Org Foundation"
    [ 2445.441] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.441] ABI class: X.Org Server Extension, version 3.0
    [ 2445.441] (II) Loading extension XFree86-DRI
    [ 2445.441] (II) LoadModule: "dri2"
    [ 2445.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2445.442] (II) Module dri2: vendor="X.Org Foundation"
    [ 2445.442] compiled for 1.8.1.902, module version = 1.2.0
    [ 2445.442] ABI class: X.Org Server Extension, version 3.0
    [ 2445.442] (II) Loading extension DRI2
    [ 2445.442] (II) LoadModule: "mach64"
    [ 2445.443] (II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
    [ 2445.443] (II) Module mach64: vendor="X.Org Foundation"
    [ 2445.443] compiled for 1.8.0, module version = 6.8.2
    [ 2445.443] Module class: X.Org Video Driver
    [ 2445.443] ABI class: X.Org Video Driver, version 7.0
    [ 2445.443] (II) MACH64: Driver for ATI Mach64 chipsets
    [ 2445.443] (++) using VT number 8
    [ 2445.448] (II) Primary Device is: PCI 01@00:00:0
    [ 2445.449] (II) MACH64(0): Creating default Display subsection in Screen section
    "LewyEkran" for depth/fbbpp 15/16
    [ 2445.449] (**) MACH64(0): Depth 15, (--) framebuffer bpp 16
    [ 2445.449] (==) MACH64(0): Using XAA acceleration architecture
    [ 2445.450] (II) MACH64: Mach64 in slot 0:9:0 detected.
    [ 2445.450] (II) Loading sub module "int10"
    [ 2445.450] (II) LoadModule: "int10"
    [ 2445.450] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 2445.450] (II) Module int10: vendor="X.Org Foundation"
    [ 2445.451] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.451] ABI class: X.Org Video Driver, version 7.0
    [ 2445.580] (II) Loading sub module "ddc"
    [ 2445.581] (II) LoadModule: "ddc"
    [ 2445.581] (II) Module "ddc" already built-in
    [ 2445.581] (II) Loading sub module "vbe"
    [ 2445.581] (II) LoadModule: "vbe"
    [ 2445.581] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 2445.581] (II) Module vbe: vendor="X.Org Foundation"
    [ 2445.581] compiled for 1.8.1.902, module version = 1.1.0
    [ 2445.581] ABI class: X.Org Video Driver, version 7.0
    [ 2445.582] (II) MACH64(0): VESA BIOS detected
    [ 2445.582] (II) MACH64(0): VESA VBE Version 2.0
    [ 2445.582] (II) MACH64(0): VESA VBE Total Mem: 1024 kB
    [ 2445.582] (II) MACH64(0): VESA VBE OEM: ATI MACH64
    [ 2445.582] (II) MACH64(0): VESA VBE OEM Software Rev: 1.0
    [ 2445.582] (II) MACH64(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    [ 2445.582] (II) MACH64(0): VESA VBE OEM Product: MACH64GT
    [ 2445.582] (II) MACH64(0): VESA VBE OEM Product Rev: 01.00
    [ 2445.583] (II) MACH64(0): VESA VBE DDC supported
    [ 2445.583] (II) MACH64(0): VESA VBE DDC Level 2
    [ 2445.583] (II) MACH64(0): VESA VBE DDC transfer in appr. 2 sec.
    [ 2445.632] (II) MACH64(0): VESA VBE DDC read successfully
    [ 2445.632] (II) MACH64(0): Manufacturer: GSM Model: 4ae0 Serial#: 12170
    [ 2445.632] (II) MACH64(0): Year: 2006 Week: 12
    [ 2445.632] (II) MACH64(0): EDID Version: 1.3
    [ 2445.632] (II) MACH64(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2445.632] (II) MACH64(0): Sync: Separate SyncOnGreen
    [ 2445.632] (II) MACH64(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2445.632] (II) MACH64(0): Gamma: 2.20
    [ 2445.632] (II) MACH64(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2445.632] (II) MACH64(0): First detailed timing is preferred mode
    [ 2445.632] (II) MACH64(0): redX: 0.647 redY: 0.346 greenX: 0.292 greenY: 0.602
    [ 2445.633] (II) MACH64(0): blueX: 0.149 blueY: 0.130 whiteX: 0.313 whiteY: 0.328
    [ 2445.633] (II) MACH64(0): Supported established timings:
    [ 2445.633] (II) MACH64(0): 720x400@70Hz
    [ 2445.633] (II) MACH64(0): 640x480@60Hz
    [ 2445.633] (II) MACH64(0): 640x480@75Hz
    [ 2445.633] (II) MACH64(0): 800x600@60Hz
    [ 2445.633] (II) MACH64(0): 800x600@75Hz
    [ 2445.633] (II) MACH64(0): 832x624@75Hz
    [ 2445.633] (II) MACH64(0): 1024x768@60Hz
    [ 2445.633] (II) MACH64(0): 1024x768@75Hz
    [ 2445.633] (II) MACH64(0): 1280x1024@75Hz
    [ 2445.633] (II) MACH64(0): 1152x864@75Hz
    [ 2445.633] (II) MACH64(0): Manufacturer's mask: 0
    [ 2445.633] (II) MACH64(0): Supported standard timings:
    [ 2445.633] (II) MACH64(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2445.633] (II) MACH64(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2445.633] (II) MACH64(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2445.633] (II) MACH64(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2445.633] (II) MACH64(0): Supported detailed timing:
    [ 2445.633] (II) MACH64(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2445.633] (II) MACH64(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2445.633] (II) MACH64(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2445.633] (II) MACH64(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
    [ 2445.634] (II) MACH64(0): Monitor name: L1952S
    [ 2445.634] (II) MACH64(0): Monitor name:
    [ 2445.634] (II) MACH64(0): EDID (in hex):
    [ 2445.634] (II) MACH64(0): 00ffffffffffff001e6de04a8a2f0000
    [ 2445.634] (II) MACH64(0): 0c1001036a261e78eaec54a5584a9a26
    [ 2445.634] (II) MACH64(0): 215054a56b80314f454f614f81800101
    [ 2445.634] (II) MACH64(0): 010101010101302a009851002a403070
    [ 2445.634] (II) MACH64(0): 1300782d1100001e000000fd00384b1e
    [ 2445.634] (II) MACH64(0): 530e000a202020202020000000fc004c
    [ 2445.634] (II) MACH64(0): 31393532530a202020202020000000fc
    [ 2445.634] (II) MACH64(0): 000a2020202020202020202020200046
    [ 2445.634] (II) MACH64(0): EDID vendor "GSM", prod id 19168
    [ 2445.634] (II) MACH64(0): Using EDID range info for horizontal sync
    [ 2445.634] (II) MACH64(0): Using EDID range info for vertical refresh
    [ 2445.634] (II) MACH64(0): Printing DDC gathered Modelines:
    [ 2445.634] (II) MACH64(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 2445.635] (II) MACH64(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 2445.635] (II) MACH64(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 2445.635] (II) MACH64(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 2445.635] (II) MACH64(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 2445.635] (II) MACH64(0): BIOS Data: BIOSSize=0x8000, ROMTable=0x00FC.
    [ 2445.635] (II) MACH64(0): BIOS Data: ClockTable=0x06AE, FrequencyTable=0x0000.
    [ 2445.635] (II) MACH64(0): BIOS Data: LCDTable=0x0000.
    [ 2445.635] (II) MACH64(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x0000.
    [ 2445.635] (II) MACH64(0): BIOS Data: I2CType=0x00, Tuner=0x00, Decoder=0x00, Audio=0x0F.
    [ 2445.635] (--) MACH64(0): ATI 3D Rage II+DVD graphics controller detected.
    [ 2445.635] (--) MACH64(0): Chip type 4755 "GU", version 2, foundry UMC, class 0, revision 0x02.
    [ 2445.635] (--) MACH64(0): PCI bus interface detected; block I/O base is 0xD800.
    [ 2445.635] (--) MACH64(0): ATI Mach64 adapter detected.
    [ 2445.636] (!!) MACH64(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    [ 2445.636] (--) MACH64(0): Internal RAMDAC (subtype 1) detected.
    [ 2445.636] (==) MACH64(0): RGB weight 555
    [ 2445.636] (==) MACH64(0): Default visual is TrueColor
    [ 2445.636] (==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2445.636] (II) MACH64(0): Using Mach64 accelerator CRTC.
    [ 2445.636] (II) MACH64(0): Storing hardware cursor image at 0xCC0FFC00.
    [ 2445.636] (II) MACH64(0): Using 8 MB linear aperture at 0xCC000000.
    [ 2445.636] (!!) MACH64(0): Virtual resolutions will be limited to 1023 kB
    due to linear aperture size and/or placement of hardware cursor image area.
    [ 2445.636] (II) MACH64(0): Using Block 0 MMIO aperture at 0xCFFFD400.
    [ 2445.636] (II) MACH64(0): Using Block 1 MMIO aperture at 0xCFFFD000.
    [ 2445.637] (II) MACH64(0): MMIO write caching enabled.
    [ 2445.637] (--) MACH64(0): 1024 kB of Pseudo-EDO DRAM detected (using 1023 kB).
    [ 2445.637] (WW) MACH64(0): Cannot shadow an accelerated frame buffer.
    [ 2445.637] (II) MACH64(0): Engine XCLK 59.876 MHz; Refresh rate code 3.
    [ 2445.637] (--) MACH64(0): Internal programmable clock generator detected.
    [ 2445.637] (--) MACH64(0): Reference clock 157.5/11 (14.318) MHz.
    [ 2445.637] (II) MACH64(0): LewyMonitor: Using hsync range of 30.00-83.00 kHz
    [ 2445.637] (II) MACH64(0): LewyMonitor: Using vrefresh range of 56.00-75.00 Hz
    [ 2445.637] (II) MACH64(0): LewyMonitor: Using maximum pixel clock of 140.00 MHz
    [ 2445.637] (II) MACH64(0): Estimated virtual size for aspect ratio 1.2667 is 1280x1024
    [ 2445.637] (II) MACH64(0): Maximum clock: 200.00 MHz
    [ 2445.637] (II) MACH64(0): Not using default mode "640x350" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "320x175" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "640x400" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "320x200" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "720x400" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "360x200" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "800x600" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "400x300" (vrefresh out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768i" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "512x384i" (vrefresh out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "512x384" (vrefresh out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1152x864" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x960" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x960" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "640x480" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x1024" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x1024" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x1024" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "640x512" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "896x672" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "896x672" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "928x696" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "928x696" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "960x720" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "960x720" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1400x1050" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1400x1050" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "960x720" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1280x1024" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1280x1024" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1152x864" (insufficient memory for mode)
    [ 2445.640] (WW) MACH64(0): Shrinking virtual size estimate from 1280x1024 to 832x624
    [ 2445.640] (--) MACH64(0): Virtual size is 832x624 (pitch 832)
    [ 2445.640] (**) MACH64(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
    [ 2445.640] (II) MACH64(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
    [ 2445.640] (II) MACH64(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 2445.640] (**) MACH64(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 2445.640] (**) MACH64(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
    [ 2445.641] (II) MACH64(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
    [ 2445.641] (**) MACH64(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
    [ 2445.641] (II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 2445.641] (**) MACH64(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
    [ 2445.641] (II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
    [ 2445.641] (II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
    [ 2445.641] (II) MACH64(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
    [ 2445.642] (II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2445.642] (**) MACH64(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
    [ 2445.642] (II) MACH64(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
    [ 2445.643] (**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
    [ 2445.643] (**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
    [ 2445.643] (**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
    [ 2445.643] (**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
    [ 2445.643] (**) MACH64(0): Display dimensions: (380, 300) mm
    [ 2445.643] (**) MACH64(0): DPI set to (55, 52)
    [ 2445.643] (II) Loading sub module "fb"
    [ 2445.643] (II) LoadModule: "fb"
    [ 2445.644] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2445.644] (II) Module fb: vendor="X.Org Foundation"
    [ 2445.644] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.644] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2445.644] (II) Loading sub module "ramdac"
    [ 2445.644] (II) LoadModule: "ramdac"
    [ 2445.645] (II) Module "ramdac" already built-in
    [ 2445.645] (II) Loading sub module "xaa"
    [ 2445.645] (II) LoadModule: "xaa"
    [ 2445.645] (II) Loading /usr/lib/xorg/modules/libxaa.so
    [ 2445.646] (II) Module xaa: vendor="X.Org Foundation"
    [ 2445.646] compiled for 1.8.1.902, module version = 1.2.1
    [ 2445.646] ABI class: X.Org Video Driver, version 7.0
    [ 2445.646] (II) Loading sub module "i2c"
    [ 2445.646] (II) LoadModule: "i2c"
    [ 2445.646] (II) Module "i2c" already built-in
    [ 2445.646] (II) MACH64(0): I2C bus "Mach64" initialized.
    [ 2445.646] (--) MACH64(0): ImpacTV chip ID 0x9A detected.
    [ 2445.656] (WW) MACH64(0): Direct rendering is not supported for ATI chips earlier than the ATI 3D Rage Pro.
    [ 2445.657] (II) MACH64(0): Largest offscreen areas (with overlaps):
    [ 2445.657] (II) MACH64(0): 832 x 5 rectangle at 0,624
    [ 2445.657] (II) MACH64(0): 448 x 6 rectangle at 0,624
    [ 2445.657] (II) MACH64(0): Using XFree86 Acceleration Architecture (XAA)
    [ 2445.657] Screen to screen bit blits
    [ 2445.657] Solid filled rectangles
    [ 2445.657] 8x8 mono pattern filled rectangles
    [ 2445.657] Indirect CPU to Screen color expansion
    [ 2445.657] Solid Lines
    [ 2445.658] Setting up tile and stipple cache:
    [ 2445.658] Not enough video memory for pixmap cache
    [ 2445.658] (==) MACH64(0): Backing store disabled
    [ 2445.658] (==) MACH64(0): Silken mouse enabled
    [ 2445.659] (**) MACH64(0): DPMS enabled
    [ 2445.659] (WW) MACH64(0): Option "Enable" is not used
    [ 2445.659] (II) MACH64(0): Direct rendering disabled
    [ 2445.659] (==) RandR enabled
    [ 2445.659] (II) Initializing built-in extension Generic Event Extension
    [ 2445.659] (II) Initializing built-in extension SHAPE
    [ 2445.659] (II) Initializing built-in extension MIT-SHM
    [ 2445.659] (II) Initializing built-in extension XInputExtension
    [ 2445.659] (II) Initializing built-in extension XTEST
    [ 2445.659] (II) Initializing built-in extension BIG-REQUESTS
    [ 2445.659] (II) Initializing built-in extension SYNC
    [ 2445.659] (II) Initializing built-in extension XKEYBOARD
    [ 2445.659] (II) Initializing built-in extension XC-MISC
    [ 2445.659] (II) Initializing built-in extension SECURITY
    [ 2445.659] (II) Initializing built-in extension XINERAMA
    [ 2445.659] (II) Initializing built-in extension XFIXES
    [ 2445.659] (II) Initializing built-in extension RENDER
    [ 2445.659] (II) Initializing built-in extension RANDR
    [ 2445.659] (II) Initializing built-in extension COMPOSITE
    [ 2445.659] (II) Initializing built-in extension DAMAGE
    [ 2445.682] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 2445.682] (II) AIGLX: Screen 0 is not DRI capable
    [ 2445.687] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    [ 2445.687] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 2446.130] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2446.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2446.130] (II) LoadModule: "evdev"
    [ 2446.131] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2446.138] (II) Module evdev: vendor="X.Org Foundation"
    [ 2446.138] compiled for 1.8.0, module version = 2.4.0
    [ 2446.138] Module class: X.Org XInput Driver
    [ 2446.138] ABI class: X.Org XInput driver, version 9.0
    [ 2446.138] (**) Power Button: always reports core events
    [ 2446.138] (**) Power Button: Device: "/dev/input/event2"
    [ 2446.138] (II) Power Button: Found keys
    [ 2446.138] (II) Power Button: Configuring as keyboard
    [ 2446.138] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 2446.138] (**) Option "xkb_rules" "evdev"
    [ 2446.138] (**) Option "xkb_model" "evdev"
    [ 2446.139] (**) Option "xkb_layout" "us"
    [ 2446.233] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 2446.233] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 2446.234] (**) Sleep Button: always reports core events
    [ 2446.234] (**) Sleep Button: Device: "/dev/input/event1"
    [ 2446.234] (II) Sleep Button: Found keys
    [ 2446.234] (II) Sleep Button: Configuring as keyboard
    [ 2446.234] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 2446.234] (**) Option "xkb_rules" "evdev"
    [ 2446.234] (**) Option "xkb_model" "evdev"
    [ 2446.234] (**) Option "xkb_layout" "us"
    [ 2446.243] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2446.243] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2446.243] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2446.243] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2446.244] (II) AT Translated Set 2 keyboard: Found keys
    [ 2446.244] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2446.244] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 2446.244] (**) Option "xkb_rules" "evdev"
    [ 2446.244] (**) Option "xkb_model" "evdev"
    [ 2446.244] (**) Option "xkb_layout" "us"
    [ 2446.245] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event4)
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Found relative axes
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2446.246] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
    [ 2446.246] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
    [ 2446.246] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
    [ 2446.246] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
    [ 2446.246] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
    [ 2446.246] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
    [ 2446.247] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
    [ 2446.247] (II) No input driver/identifier specified (ignoring)
    [ 2446.247] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 2446.247] (II) No input driver/identifier specified (ignoring)
    The same effect with Xinerama on. Please, help me.

    hume's doona wrote:
    Are you configuring for the nvidia card?
    #sudo nvidia-settings
    and set it to twin view in the gui?
    No I think the problem is more basic than that...he's trying to use an ATi card and an Nvidia card simultaneously.  Something that I don't think will work.
    It also dependent on what drivers he is trying to use, as the (new) Nvidia proprietary driver only supports GeForce4 series chips and up...and the OP has an even older card than that.  The legacy Nvidia-96.xx driver does support his chipset, but 96.xx does not work with Xorg1.8 last I knew. see: http://www.archlinux.org/news/502/
    Twinview does not exist in the Nouveau drivers, so one has to use xrandr: http://wiki.archlinux.org/index.php/Nouveau
    Last edited by Skripka (2010-08-14 14:16:25)

  • Dual Monitor (VGA + DVI-I-to-VGA) Problem

    This is not specifically Arch related, but maybe someone can help me with this anyway...
    My problem is that when I boot up with both monitors plugged in, the BIOS uses the VGA one as primary, then in any OS I can't detect the second monitor hanging on the DVI port in any way, it seems that its like "invisible", like it hasn't been activated by the BIOS or something...
    When I boot up with only the DVI monitor plugged in, it works fine and then I can plug in the normal VGA later and the strange thing is that both monitors work properly then!
    So my question is - is there a way to make the BIOS "initialize" both monitors or is there a way to "wake" the DVI-plugged monitor up somehow after boot? Cause plugging one monitor out and in for each boot is not a thing I'd like to do on regular basis

    My graphics card died a few days ago and now I've got an ATI Radeon X300 card instead, which means I have to start over with dual head configuration...
    Now I'm facing the exactly same problem (monitor on DVI port is seen as "disconnected" which is not true), but the ConnectedMonitor option is not working.. it would be awesome if someone could tell me a similar option (to force monitor output) working with the xf86-video-ati (radeon) driver!

  • T500 Dual Monitors w/ Laptop Screen

    I have a T500 (w/ ATI Radeon Mobility HD 3650) and a ThinkPad Advanced Mini-Dock.  I currently use two external monitors, one out of each of the dock's ports (DVI and VGA).  Is it possible to also utilize the laptop screen for a total of three screens?  If so, how do I set that up.  I can't get more than two to come on at a time.
    Thanks
    Solved!
    Go to Solution.

    I have the same thing, but can't get two monitors to work.  I have ATI and have high performance on graphics.   I have 2504 Advanced....  I can't use any dvi + vga or dp.  I also can't use dvi on dock and dp on t500.  i've tried all combinations on dock and t500, but can't find anyway to get two external monitors displays using dvi, vga, or dp.   I would appreciate any help.
    I would be happy just to have two screens.  I did disable the internal lcd and when I am in ATI Advance I can right click the two disabled monitors ( the lcd and my second external), but ATI only give me options to add the lcd, I can't get any options to right click on the second external monitor - no matter how it is connected on dock or t500 - dp or vga.
    Thanks for any help.

  • Dual Monitor and Full screen playback in Color 1.0

    So, I was wondering if somebody could help me out.
    I have 2 screens, one is a 23" ACD other is a 23" dell. I am going to be color correcting with my Matrox MXO setup on the 23"ACD. Whenever I do full screen playback the waveform monitor and vectroscope and all that jazz is not available anymore (obviously because of full screen)
    So I was wondering what my options were:
    1. Setup the waveform and vector scope to show on my primary display? (if possible, I'm not sure how to do it)
    2. Do I have to get another graphics card and run three monitors?
    3. If I Color grade with full screen playback disabled am I still utilizing the MXO for grading?
    I am new to Color and how it works so I apologize if these questions seem "newbie-ish" of me.
    Thanks

    Isn't there a SINGLE MONITOR option in COLOR? Use that.
    I don't think two graphics cards will work with Color, as Color relies on the card when it comes time to render. Might mess it up, or not work.
    Shane

  • External monitor showing black screen

    I just got an LG external monitor with DVI cable and the mini-DVI to DVI adapter. When I plug it in, my MacBook sees the display but nothing shows up on the display. Any ideas as to what the issue might be? Could it be the port on my MacBook? This is the second display I've tried and am having the same issue, so I'm thinking it's my computer. Help!!!

    I have been having similar problems with an LG monitor too but it is resolution dependent. Could there be some issue with LG monitors and Macs? I could go the VGA route too but isn't that inferior picture quality?
    Message was edited by: Voodoo Ray

  • Dual Monitor has black bar on left

    I have a 27" iMac running OS X 10.6.5 and have my second monitor (AOC 20" monitor with resolution of 1600 x 900 @ 60Hz). There is a black bar on the left side, can I get rid of this?

    I rechecked my AOC and it's actually 22" with 1920 x 1080 @ 60Hz, which is what I have me settings at.

  • Onboard and PCI-E Graphics shows blinking black screen on 8.1

    I have a homebrewed 3rd Gen Core i5 on an Intel DQ77MK motherboard which has onboard graphics. I also have an nVidia Quadro FX 3500 PCI-E graphics cards.
    The Quadro has two DVI outputs connected to two monitors, I connected a third to the onboard graphics. So I have three monitors.
    This worked fine with Windows 7. I go to install windows 8.1 and I turned off auto-updates and all the auto device driver junk. I installed the Intel drivers and the nVidia Drivers and three monitors working fine. I go to update to grab a package to remove
    that stupid "SecureBoot isn't configured properly" watermark and I reboot to black screens with a cursor and nothing else. I reboot to the BIOS and turn off the integrated graphics and I can get back in - but I really want my triple monitors. 

    black screens with a cursor and nothing else. 
    So, if there is a cursor, it's not really "black", just blank.  But to be really clear "cursor" means an underscore at the top of the screen, or something else?  I have seen the former myself but don't really know what it means.  Also it has
    only happened occasionally and I can't remember whether it shows on both of my monitors when it happens?  I think that when I have seen that I have had to unplug some other USB devices to get past that symptom.  E.g. my usual tricks with Win-P or
    Ctrl-Alt-Delete or Shift-F10 etc. did nothing--no beeps and no drive light activity.
    A reason that it could be important to know if the underscore appears on all monitors is that sometimes the boot seems to get confused about which monitor is primary, so if both monitors have different attributes (as mine do) then perhaps the symptom
    could be understood as the wrong monitor getting the controls that were meant for another? 
    reboot to the BIOS and turn off the integrated graphics and I can get back in 
    That sounds like a driver problem but I don't know for which component, e.g. WinPE? Boot Manager?  OS?  So instead of doing that have you tried using the Advanced Boot Option to use low resolution video (AKA VGA mode)?  The BCD allows even
    other video related settings.  While you are having problems it would be a good idea to turn on the Boot menu prompt, even if you don't have multiple partitions to boot, just to make it easier to use those options.  FWIW a surprise for me when I
    tried this is that we are not restricted to what drivers the OS can use later.  E.g. I just used Win-P once in the OS and could make everything work normally after that.
    Another thing that you could try is tracing your boot activity with xbootmgr and then finding out what is different for your two cases.
    Good luck
    Robert Aldwinckle

  • Dual Monitor 8500GT

    I just installed an MSI 8500GT into an HP tower and the Dual Monitor setup doesn't seem to work. I installed the unit on an HP a1410n.  Here are the specs for the a1410n.
    http://reviews.cnet.com/desktops/hp-pavilion-media-center/4507-3118_7-31851077.html?tag=sub
    I am using model, NX8500GT-TD256E.
    First off, when I boot up the computer with both monitors, I get no display, after unplugging both monitors and reattaching only the primary monitor, I can get a display after Windows boots up. Once windows is up and running when I attempt to setup a dual monitor, the primary screen gets scrambled and is unusable, and the other does not do anything. I hope this can be fixed with software, as I do not want to go through an RMA process. Any help would be appreciated. Let me know if more information is necessary.

    At first I was using whatever came with the card. I have tried it using the latest drivers that nVidia offers.

  • Anyone grasped dual monitors with Lion yet?

    I know it's fairly early days, but I cannot seem to get dual monitors with full screen Apps sussed out. It seems the second monitor doesn't like to join in the fun.

    It's absolutely ridiculous.  One of the key selling points of full screen apps was to take away the distractions of the window furniture, menu and dock - letting you focus on what's important, now what do we get to distract us - in my case a 1600x1200 linen pattern on my second monitor.  Daft.
    FWIW - I don't think the 'film reel' approach mentioned above would be a good a solution - as it assumes the 2 full screen apps to want to view are adjacent, and since Mission Control rearranges spaces to suit the 2 apps may not continue to be adjacent.  Surely though it would be easy enough to allow a different full screen app on the second screen (which would be excellent imho), I tend to have a development window open and a browser on the second screen - having both full screen is exactly what I'd want to view.  Alternatively, having the second screen as a plain 'Desktop' space would be acceptable (at least then I could open the apps I want in a non-fullscreen manner).
    I don't think this is going to limitted to edge cases either - earlier today I was typing out an email, and needed to calculate a quick sum to include (mail was fullscreen) - in order to call up calculator I need to go : Mission Control, Switch to Desktop Space, Locate calculator, Perform calculation, remember it, mission control, switch to Mail Space, type calculation answer - ironically one can't even trigger Spotlight and do the calculating in there - as menubar is disabled when creating an email - but anyway, I digress.
    Other than this (admittedly major) issue, I find full screen apps a great way to work - and even with this issue, they're a huge boon when I'm using the laptop sans extra monitor.
    Regards,
    Ryan

  • Black screen after logging in KDE (dual monitor)

    Hi everybody,
    I'm having a severe problem with kde 4.12.2; I'll explain my settings:
    1) A screen 2560x1440 on DVI
    2) A screen 1920x1080 on VGA
    My /etc/X11/xorg.conf is this
    Section "Monitor"
    Identifier "DVI-I-1"
    Option "Primary" "true"
    Option "PreferredMode" "2560x1440"
    EndSection
    Section "Monitor"
    Identifier "VGA-1"
    Option "LeftOf" "DVI-I-1"
    Option "PreferredMode" "1920x1080"
    EndSection
    when kdm starts I can see login manager on both screen (each one with the correct resolution). As far as I log in all disappear on both screen: it remains only a completely black screen (in which I manage to recognize mouse pointer). The strange fact is that I can still use yakuake (without seeing it), as a matter of facts if I digit "reboot" on command line in yakualke, my PC effectively reboots... but i cannot see anything.
    If I use only one monitor (disconnecting the other) all is ok.
    I've also i3 working perfectly with the same configuration.
    Please help me!

    dmesg return this
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=76b38aee-1933-48a0-b00b-2166f50b45fc ro verbose
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.5 present.
    [ 0.000000] DMI: System manufacturer System Product Name/P6TD DELUXE, BIOS 0106 07/15/2009
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x340000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E3FFF write-protect
    [ 0.000000] E4000-EBFFF write-through
    [ 0.000000] EC000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask F00000000 write-back
    [ 0.000000] 2 base 300000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x33fe00000-0x33fffffff]
    [ 0.000000] [mem 0x33fe00000-0x33fffffff] page 2M
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x33c000000-0x33fdfffff]
    [ 0.000000] [mem 0x33c000000-0x33fdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x300000000-0x33bffffff]
    [ 0.000000] [mem 0x300000000-0x33bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
    [ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
    [ 0.000000] [mem 0x100000000-0x2ffffffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x379f0000-0x37ceffff]
    [ 0.000000] ACPI: RSDP 00000000000fb250 000014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 00000000bf780000 000040 (v01 071509 RSDT1009 20090715 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000bf780200 000084 (v01 071509 FACP1009 20090715 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 00000000bf7804b0 00B62E (v01 A1438 A1438001 00000001 INTL 20060113)
    [ 0.000000] ACPI: FACS 00000000bf798000 000040
    [ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 071509 APIC1009 20090715 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 071509 OEMMCFG 20090715 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 071509 OEMB1009 20090715 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 071509 OEMHPET 20090715 MSFT 00000097)
    [ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 071509 OEMOSFR 20090715 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000bf79a140 00249F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x33fffffff]
    [ 0.000000] NODE_DATA [mem 0x33fff2000-0x33fff6fff]
    [ 0.000000] [ffffea0000000000-ffffea000cffffff] PMD -> [ffff880333600000-ffff88033f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x33fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
    [ 0.000000] node 0: [mem 0x100000000-0x33fffffff]
    [ 0.000000] On node 0 totalpages: 3143454
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12190 pages used for memmap
    [ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
    [ 0.000000] Normal zone: 36864 pages used for memmap
    [ 0.000000] Normal zone: 2359296 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
    [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 64
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88033fc00000 s86336 r8192 d24256 u131072
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3094315
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=76b38aee-1933-48a0-b00b-2166f50b45fc ro verbose
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 12294300K/12573816K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 279516K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
    [ 0.000000] NR_IRQS:8448 nr_irqs:1216 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 50331648 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2672.847 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5347.43 BogoMIPS (lpj=8909490)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000035] Security Framework initialized
    [ 0.000043] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000044] Yama: becoming mindful.
    [ 0.001039] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.004061] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.005331] Mount-cache hash table entries: 256
    [ 0.005505] Initializing cgroup subsys memory
    [ 0.005511] Initializing cgroup subsys devices
    [ 0.005512] Initializing cgroup subsys freezer
    [ 0.005514] Initializing cgroup subsys net_cls
    [ 0.005515] Initializing cgroup subsys blkio
    [ 0.005533] CPU: Physical Processor ID: 0
    [ 0.005534] CPU: Processor Core ID: 0
    [ 0.005538] mce: CPU supports 9 MCE banks
    [ 0.005547] CPU0: Thermal monitoring enabled (TM1)
    [ 0.005555] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.005627] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.006541] ACPI: Core revision 20131115
    [ 0.010413] ACPI: All ACPI Tables successfully acquired
    [ 0.036170] ftrace: allocating 21057 entries in 83 pages
    [ 0.045404] Switched APIC routing to physical flat.
    [ 0.045954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.078948] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (fam: 06, model: 1a, stepping: 05)
    [ 0.241764] APIC calibration not consistent with PM-Timer: 156ms instead of 100ms
    [ 0.241767] APIC delta adjusted to PM-Timer: 835226 (1308515)
    [ 0.241784] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
    [ 0.241790] perf_event_intel: CPU erratum AAJ80 worked around
    [ 0.241791] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.241793] ... version: 3
    [ 0.241794] ... bit width: 48
    [ 0.241795] ... generic registers: 4
    [ 0.241796] ... value mask: 0000ffffffffffff
    [ 0.241797] ... max period: 000000007fffffff
    [ 0.241798] ... fixed-purpose events: 3
    [ 0.241799] ... event mask: 000000070000000f
    [ 0.268512] x86: Booting SMP configuration:
    [ 0.281907] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.268515] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.401726] x86: Booted up 1 node, 8 CPUs
    [ 0.401730] smpboot: Total of 8 processors activated (42782.45 BogoMIPS)
    [ 0.407746] devtmpfs: initialized
    [ 0.410503] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
    [ 0.411349] RTC time: 10:25:56, date: 02/27/14
    [ 0.411386] NET: Registered protocol family 16
    [ 0.411473] cpuidle: using governor ladder
    [ 0.411475] cpuidle: using governor menu
    [ 0.411497] ACPI: bus type PCI registered
    [ 0.411499] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.411555] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.411557] PCI: not using MMCONFIG
    [ 0.411559] PCI: Using configuration type 1 for base access
    [ 0.412212] bio: create slab <bio-0> at 0
    [ 0.412334] ACPI: Added _OSI(Module Device)
    [ 0.412336] ACPI: Added _OSI(Processor Device)
    [ 0.412337] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.412338] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.414291] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.443864] ACPI: SSDT 00000000bf7980c0 000403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
    [ 0.444092] ACPI: Dynamic OEM Table Load:
    [ 0.444094] ACPI: SSDT (null) 000403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
    [ 0.444281] ACPI: SSDT 00000000bf7984d0 000403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
    [ 0.444506] ACPI: Dynamic OEM Table Load:
    [ 0.444508] ACPI: SSDT (null) 000403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
    [ 0.444696] ACPI: SSDT 00000000bf7988e0 000403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
    [ 0.444922] ACPI: Dynamic OEM Table Load:
    [ 0.444924] ACPI: SSDT (null) 000403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
    [ 0.445121] ACPI: SSDT 00000000bf798cf0 000403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
    [ 0.445351] ACPI: Dynamic OEM Table Load:
    [ 0.445353] ACPI: SSDT (null) 000403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
    [ 0.455263] ACPI: SSDT 00000000bf799100 000403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
    [ 0.455491] ACPI: Dynamic OEM Table Load:
    [ 0.455493] ACPI: SSDT (null) 000403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
    [ 0.468586] ACPI: SSDT 00000000bf799510 000403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
    [ 0.468816] ACPI: Dynamic OEM Table Load:
    [ 0.468818] ACPI: SSDT (null) 000403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
    [ 0.481919] ACPI: SSDT 00000000bf799920 000403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
    [ 0.482150] ACPI: Dynamic OEM Table Load:
    [ 0.482152] ACPI: SSDT (null) 000403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
    [ 0.508416] ACPI: SSDT 00000000bf799d30 000403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
    [ 0.508658] ACPI: Dynamic OEM Table Load:
    [ 0.508660] ACPI: SSDT (null) 000403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
    [ 0.508816] ACPI: Interpreter enabled
    [ 0.508824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 0.508836] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.508837] ACPI: Using IOAPIC for interrupt routing
    [ 0.508859] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.509714] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.523249] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.523342] ACPI: No dock devices found.
    [ 0.528784] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.528789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.528793] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.529079] PCI host bridge to bus 0000:00
    [ 0.529082] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.529084] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.529085] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.529087] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.529088] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [ 0.529090] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    [ 0.529092] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
    [ 0.529103] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
    [ 0.529153] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
    [ 0.529228] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
    [ 0.529276] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.529323] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.529354] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
    [ 0.529406] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 0.529452] pci 0000:00:03.0: System wakeup disabled by ACPI
    [ 0.529484] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
    [ 0.529532] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [ 0.529578] pci 0000:00:07.0: System wakeup disabled by ACPI
    [ 0.529614] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
    [ 0.529714] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
    [ 0.529812] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
    [ 0.529909] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
    [ 0.530003] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
    [ 0.530042] pci 0000:00:1a.0: reg 0x20: [io 0x9800-0x981f]
    [ 0.530127] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.530157] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
    [ 0.530197] pci 0000:00:1a.1: reg 0x20: [io 0x9880-0x989f]
    [ 0.530281] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.530313] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
    [ 0.530352] pci 0000:00:1a.2: reg 0x20: [io 0x9c00-0x9c1f]
    [ 0.530435] pci 0000:00:1a.2: System wakeup disabled by ACPI
    [ 0.530472] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
    [ 0.530493] pci 0000:00:1a.7: reg 0x10: [mem 0xf7fff000-0xf7fff3ff]
    [ 0.530576] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.530623] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.530655] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
    [ 0.530669] pci 0000:00:1b.0: reg 0x10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
    [ 0.530731] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.530801] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
    [ 0.530865] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.530914] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.530943] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
    [ 0.531006] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.531054] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.531084] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
    [ 0.531147] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.531195] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.531223] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
    [ 0.531286] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.531334] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.531364] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
    [ 0.531403] pci 0000:00:1d.0: reg 0x20: [io 0x9080-0x909f]
    [ 0.531488] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.531517] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
    [ 0.531557] pci 0000:00:1d.1: reg 0x20: [io 0x9400-0x941f]
    [ 0.531640] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.531670] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
    [ 0.531709] pci 0000:00:1d.2: reg 0x20: [io 0x9480-0x949f]
    [ 0.531797] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.531837] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
    [ 0.531857] pci 0000:00:1d.7: reg 0x10: [mem 0xf7ffe000-0xf7ffe3ff]
    [ 0.531940] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.531988] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.532016] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.532099] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.532129] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
    [ 0.532202] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
    [ 0.532207] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    [ 0.532210] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
    [ 0.532214] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
    [ 0.532306] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
    [ 0.532320] pci 0000:00:1f.2: reg 0x10: [io 0x8000-0x8007]
    [ 0.532327] pci 0000:00:1f.2: reg 0x14: [io 0x7c00-0x7c03]
    [ 0.532335] pci 0000:00:1f.2: reg 0x18: [io 0x7880-0x7887]
    [ 0.532342] pci 0000:00:1f.2: reg 0x1c: [io 0x7800-0x7803]
    [ 0.532349] pci 0000:00:1f.2: reg 0x20: [io 0x7480-0x748f]
    [ 0.532356] pci 0000:00:1f.2: reg 0x24: [io 0x7400-0x740f]
    [ 0.532447] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
    [ 0.532461] pci 0000:00:1f.3: reg 0x10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
    [ 0.532480] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
    [ 0.532557] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
    [ 0.532571] pci 0000:00:1f.5: reg 0x10: [io 0x9000-0x9007]
    [ 0.532578] pci 0000:00:1f.5: reg 0x14: [io 0x8c00-0x8c03]
    [ 0.532585] pci 0000:00:1f.5: reg 0x18: [io 0x8880-0x8887]
    [ 0.532592] pci 0000:00:1f.5: reg 0x1c: [io 0x8800-0x8803]
    [ 0.532599] pci 0000:00:1f.5: reg 0x20: [io 0x8480-0x848f]
    [ 0.532607] pci 0000:00:1f.5: reg 0x24: [io 0x8400-0x840f]
    [ 0.532731] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.532787] pci 0000:02:00.0: [10de:0622] type 00 class 0x030000
    [ 0.532797] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
    [ 0.532807] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.532817] pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.532823] pci 0000:02:00.0: reg 0x24: [io 0xac00-0xac7f]
    [ 0.532830] pci 0000:02:00.0: reg 0x30: [mem 0xfba80000-0xfbafffff pref]
    [ 0.538402] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.538407] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
    [ 0.538411] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff]
    [ 0.538420] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.538459] pci 0000:00:07.0: PCI bridge to [bus 03]
    [ 0.538511] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 0.538519] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
    [ 0.538584] pci 0000:06:00.0: [11ab:4364] type 00 class 0x020000
    [ 0.538606] pci 0000:06:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit]
    [ 0.538617] pci 0000:06:00.0: reg 0x18: [io 0xd800-0xd8ff]
    [ 0.538658] pci 0000:06:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref]
    [ 0.538722] pci 0000:06:00.0: supports D1 D2
    [ 0.538724] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.545073] pci 0000:00:1c.2: PCI bridge to [bus 06]
    [ 0.545078] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.545086] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.545152] pci 0000:05:00.0: [11ab:6121] type 00 class 0x01018f
    [ 0.545168] pci 0000:05:00.0: reg 0x10: [io 0xcc00-0xcc07]
    [ 0.545179] pci 0000:05:00.0: reg 0x14: [io 0xc880-0xc883]
    [ 0.545190] pci 0000:05:00.0: reg 0x18: [io 0xc800-0xc807]
    [ 0.545201] pci 0000:05:00.0: reg 0x1c: [io 0xc480-0xc483]
    [ 0.545212] pci 0000:05:00.0: reg 0x20: [io 0xc400-0xc40f]
    [ 0.545223] pci 0000:05:00.0: reg 0x24: [mem 0xfbcffc00-0xfbcfffff]
    [ 0.545286] pci 0000:05:00.0: supports D1
    [ 0.545287] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
    [ 0.545326] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.545336] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.545339] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
    [ 0.545342] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
    [ 0.545410] pci 0000:04:00.0: [11ab:4364] type 00 class 0x020000
    [ 0.545432] pci 0000:04:00.0: reg 0x10: [mem 0xfbbfc000-0xfbbfffff 64bit]
    [ 0.545443] pci 0000:04:00.0: reg 0x18: [io 0xb800-0xb8ff]
    [ 0.545484] pci 0000:04:00.0: reg 0x30: [mem 0xfbbc0000-0xfbbdffff pref]
    [ 0.545548] pci 0000:04:00.0: supports D1 D2
    [ 0.545549] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.551741] pci 0000:00:1c.5: PCI bridge to [bus 04]
    [ 0.551746] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
    [ 0.551753] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
    [ 0.551796] pci 0000:08:02.0: [1106:3044] type 00 class 0x0c0010
    [ 0.551812] pci 0000:08:02.0: reg 0x10: [mem 0xfbeff000-0xfbeff7ff]
    [ 0.551822] pci 0000:08:02.0: reg 0x14: [io 0xec00-0xec7f]
    [ 0.551887] pci 0000:08:02.0: supports D2
    [ 0.551888] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
    [ 0.551951] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
    [ 0.551954] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.551957] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.551962] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.551965] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.551967] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.551969] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.551970] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.551972] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
    [ 0.552413] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [ 0.552458] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [ 0.552499] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
    [ 0.552543] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
    [ 0.552587] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
    [ 0.552630] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
    [ 0.552674] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
    [ 0.552717] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
    [ 0.552820] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.552826] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.552859] Found 1 acpi root devices
    [ 0.552934] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.552936] vgaarb: loaded
    [ 0.552937] vgaarb: bridge control possible 0000:02:00.0
    [ 0.552965] PCI: Using ACPI for IRQ routing
    [ 0.558640] PCI: Discovered peer bus ff
    [ 0.558641] PCI: root bus ff: using default resources
    [ 0.558642] PCI: Probing PCI hardware (bus ff)
    [ 0.558661] PCI host bridge to bus 0000:ff
    [ 0.558663] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
    [ 0.558665] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
    [ 0.558666] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
    [ 0.558671] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
    [ 0.558705] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
    [ 0.558738] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
    [ 0.558769] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
    [ 0.558802] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
    [ 0.558835] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
    [ 0.558868] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
    [ 0.558899] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
    [ 0.558931] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
    [ 0.558961] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
    [ 0.558991] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
    [ 0.559023] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
    [ 0.559054] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
    [ 0.559084] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
    [ 0.559114] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
    [ 0.559146] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
    [ 0.559178] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
    [ 0.559209] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
    [ 0.559239] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
    [ 0.559280] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
    [ 0.559285] PCI: pci_cache_line_size set to 64 bytes
    [ 0.559364] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [ 0.559365] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
    [ 0.559443] NetLabel: Initializing
    [ 0.559444] NetLabel: domain hash size = 128
    [ 0.559445] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.559456] NetLabel: unlabeled traffic allowed by default
    [ 0.559470] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.559474] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.559477] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.561733] Switched to clocksource hpet
    [ 0.565496] pnp: PnP ACPI init
    [ 0.565505] ACPI: bus type PNP registered
    [ 0.565558] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
    [ 0.565560] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
    [ 0.565562] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
    [ 0.565564] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
    [ 0.565566] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
    [ 0.565568] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
    [ 0.565570] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.565604] pnp 00:01: [dma 4]
    [ 0.565619] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.565650] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.565670] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.565691] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.565837] system 00:05: [io 0x0290-0x029f] has been reserved
    [ 0.565841] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.565997] system 00:06: [io 0x04d0-0x04d1] has been reserved
    [ 0.565999] system 00:06: [io 0x0800-0x087f] could not be reserved
    [ 0.566001] system 00:06: [io 0x0500-0x057f] could not be reserved
    [ 0.566004] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.566006] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.566008] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
    [ 0.566010] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.566075] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.566123] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.566179] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
    [ 0.566182] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.566268] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.566270] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.566273] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.566356] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.566359] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.566502] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.566504] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.566506] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.566508] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
    [ 0.566510] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
    [ 0.566513] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.566610] pnp: PnP ACPI: found 13 devices
    [ 0.566612] ACPI: bus type PNP unregistered
    [ 0.572661] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
    [ 0.572664] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 400000
    [ 0.572671] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
    [ 0.572678] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
    [ 0.572685] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
    [ 0.572698] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
    [ 0.572702] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
    [ 0.572704] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.572706] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.572708] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.572710] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.572713] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
    [ 0.572716] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.572718] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.572720] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
    [ 0.572722] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.572725] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.572733] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.572735] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
    [ 0.572738] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff]
    [ 0.572741] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.572746] pci 0000:00:07.0: PCI bridge to [bus 03]
    [ 0.572753] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 0.572755] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.572759] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
    [ 0.572763] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
    [ 0.572767] pci 0000:00:1c.2: PCI bridge to [bus 06]
    [ 0.572770] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.572774] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.572777] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.572782] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.572784] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
    [ 0.572788] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
    [ 0.572791] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.572796] pci 0000:00:1c.5: PCI bridge to [bus 04]
    [ 0.572798] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
    [ 0.572802] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
    [ 0.572805] pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
    [ 0.572810] pci 0000:00:1e.0: PCI bridge to [bus 08]
    [ 0.572812] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.572816] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.572823] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.572825] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.572826] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.572828] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.572830] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.572831] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
    [ 0.572833] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
    [ 0.572834] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbafffff]
    [ 0.572836] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.572838] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
    [ 0.572839] pci_bus 0000:07: resource 1 [mem 0xf0000000-0xf03fffff]
    [ 0.572841] pci_bus 0000:07: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
    [ 0.572842] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.572844] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
    [ 0.572846] pci_bus 0000:06: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.572847] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
    [ 0.572849] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
    [ 0.572850] pci_bus 0000:05: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.572852] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
    [ 0.572853] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
    [ 0.572855] pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
    [ 0.572856] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
    [ 0.572858] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
    [ 0.572860] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
    [ 0.572861] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
    [ 0.572863] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.572864] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.572866] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.572867] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
    [ 0.572870] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
    [ 0.572872] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.572898] NET: Registered protocol family 2
    [ 0.573067] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.573330] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.573470] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.573491] TCP: reno registered
    [ 0.573508] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.573565] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.573666] NET: Registered protocol family 1
    [ 0.575213] pci 0000:02:00.0: Boot video device
    [ 0.575244] PCI: CLS 64 bytes, default 64
    [ 0.575285] Unpacking initramfs...
    [ 0.626677] Freeing initrd memory: 3072K (ffff8800379f0000 - ffff880037cf0000)
    [ 0.626682] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.626684] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
    [ 0.626921] Scanning for low memory corruption every 60 seconds
    [ 0.627229] audit: initializing netlink socket (disabled)
    [ 0.627239] type=2000 audit(1393496755.436:1): initialized
    [ 0.638266] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.639483] zbud: loaded
    [ 0.639624] VFS: Disk quotas dquot_6.5.2
    [ 0.639663] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.639799] msgmni has been set to 24018
    [ 0.639849] Key type big_key registered
    [ 0.640034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.640078] io scheduler noop registered
    [ 0.640079] io scheduler deadline registered
    [ 0.640102] io scheduler cfq registered (default)
    [ 0.640265] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
    [ 0.640404] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
    [ 0.640555] pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
    [ 0.640707] pcieport 0000:00:1c.4: irq 66 for MSI/MSI-X
    [ 0.640853] pcieport 0000:00:1c.5: irq 67 for MSI/MSI-X
    [ 0.640919] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.640931] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.640968] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
    [ 0.640969] vesafb: scrolling: redraw
    [ 0.640971] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.641397] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011b00000, using 7552k, total 7552k
    [ 0.936568] Console: switching to colour frame buffer device 200x75
    [ 1.231708] fb0: VESA VGA frame buffer device
    [ 1.231718] intel_idle: MWAIT substates: 0x1120
    [ 1.231727] intel_idle: v0.4 model 0x1A
    [ 1.231729] intel_idle: lapic_timer_reliable_states 0x2
    [ 1.231914] GHES: HEST is not enabled!
    [ 1.231956] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.232283] Linux agpgart interface v0.103
    [ 1.232350] rtc_cmos 00:02: RTC can wake from S4
    [ 1.232453] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.232478] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.232561] drop_monitor: Initializing network drop monitor service
    [ 1.232612] TCP: cubic registered
    [ 1.232690] NET: Registered protocol family 10
    [ 1.232826] NET: Registered protocol family 17
    [ 1.232833] Key type dns_resolver registered
    [ 1.233086] registered taskstats version 1
    [ 1.233838] Magic number: 2:438:427
    [ 1.233928] rtc_cmos 00:02: setting system clock to 2014-02-27 10:25:57 UTC (1393496757)
    [ 1.233950] PM: Hibernation image not present or could not be loaded.
    [ 1.234985] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 1.234987] Write protecting the kernel read-only data: 8192k
    [ 1.237288] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
    [ 1.238780] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
    [ 1.247402] systemd-udevd[82]: starting version 208
    [ 1.265479] ACPI: bus type USB registered
    [ 1.265514] usbcore: registered new interface driver usbfs
    [ 1.265530] usbcore: registered new interface driver hub
    [ 1.265603] usbcore: registered new device driver usb
    [ 1.266283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.266427] ehci-pci: EHCI PCI platform driver
    [ 1.266750] SCSI subsystem initialized
    [ 1.266841] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 1.266866] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.266879] ehci-pci 0000:00:1a.7: debug port 1
    [ 1.266924] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.268635] libata version 3.00 loaded.
    [ 1.269629] ahci 0000:05:00.0: version 3.0
    [ 1.270292] scsi0 : pata_marvell
    [ 1.270425] scsi1 : pata_marvell
    [ 1.270529] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16
    [ 1.270531] ata2: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16
    [ 1.270772] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.270778] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7fff000
    [ 1.278195] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.278452] hub 1-0:1.0: USB hub found
    [ 1.278459] hub 1-0:1.0: 6 ports detected
    [ 1.278786] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 1.278797] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.278810] ehci-pci 0000:00:1d.7: debug port 1
    [ 1.282699] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.282716] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7ffe000
    [ 1.291553] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.291678] hub 2-0:1.0: USB hub found
    [ 1.291684] hub 2-0:1.0: 6 ports detected
    [ 1.292004] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.292012] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.292037] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
    [ 1.292284] hub 3-0:1.0: USB hub found
    [ 1.292294] hub 3-0:1.0: 2 ports detected
    [ 1.292516] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.292523] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.292552] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
    [ 1.292716] hub 4-0:1.0: USB hub found
    [ 1.292722] hub 4-0:1.0: 2 ports detected
    [ 1.292888] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.292892] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.292920] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
    [ 1.293080] hub 5-0:1.0: USB hub found
    [ 1.293085] hub 5-0:1.0: 2 ports detected
    [ 1.293249] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.293254] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.293275] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
    [ 1.293440] hub 6-0:1.0: USB hub found
    [ 1.293446] hub 6-0:1.0: 2 ports detected
    [ 1.293611] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.293616] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.293636] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
    [ 1.293798] hub 7-0:1.0: USB hub found
    [ 1.293804] hub 7-0:1.0: 2 ports detected
    [ 1.293967] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.293973] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.293994] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
    [ 1.294148] hub 8-0:1.0: USB hub found
    [ 1.294153] hub 8-0:1.0: 2 ports detected
    [ 1.294316] ata_piix 0000:00:1f.2: version 2.13
    [ 1.294434] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 1.295801] scsi2 : ata_piix
    [ 1.295862] scsi3 : ata_piix
    [ 1.295899] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
    [ 1.295903] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
    [ 1.296018] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 1.296635] scsi4 : ata_piix
    [ 1.296696] scsi5 : ata_piix
    [ 1.296731] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
    [ 1.296733] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
    [ 1.335060] firewire_ohci 0000:08:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
    [ 1.585039] usb 1-5: new high-speed USB device number 2 using ehci-pci
    [ 1.625718] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.628118] tsc: Refined TSC clocksource calibration: 2672.727 MHz
    [ 1.636608] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.708882] hub 1-5:1.0: USB hub found
    [ 1.709166] hub 1-5:1.0: 4 ports detected
    [ 1.814892] usb 2-3: new high-speed USB device number 2 using ehci-pci
    [ 1.834846] firewire_core 0000:08:02.0: created device fw0: GUID 001e8c0000b8b1d3, S400
    [ 1.939364] hub 2-3:1.0: USB hub found
    [ 1.939420] hub 2-3:1.0: 4 ports detected
    [ 2.044785] usb 2-4: new high-speed USB device number 3 using ehci-pci
    [ 2.088035] ata3.00: SATA link down (SStatus 0 SControl 300)
    [ 2.088048] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.099040] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.099055] ata4.01: SATA link down (SStatus 0 SControl 300)
    [ 2.099066] ata4.01: link offline, clearing class 3 to NONE
    [ 2.104925] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100
    [ 2.105101] ata3.01: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
    [ 2.105104] ata3.01: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.112052] ata3.01: configured for UDMA/133
    [ 2.112439] scsi 2:0:1:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
    [ 2.113576] sd 2:0:1:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 2.114132] sd 2:0:1:0: [sda] Write Protect is off
    [ 2.114137] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.114343] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.115929] sda: sda1
    [ 2.117144] sd 2:0:1:0: [sda] Attached SCSI disk
    [ 2.118217] ata4.00: configured for UDMA/100
    [ 2.121698] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01 PQ: 0 ANSI: 5
    [ 2.126940] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.126943] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.127212] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.264029] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.322530] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.323971] systemd[1]: Set hostname to <desktop09>.
    [ 2.324898] random: systemd urandom read with 41 bits of entropy available
    [ 2.387757] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 2.387994] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.388043] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.388057] systemd[1]: Expecting device sys-subsystem-net-devices-enp4s0.device...
    [ 2.389666] systemd[1]: Starting Network is Online.
    [ 2.390869] systemd[1]: Reached target Network is Online.
    [ 2.390879] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.392240] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.392250] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.393721] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.393730] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.395298] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.395307] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.396678] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.396687] systemd[1]: Starting Encrypted Volumes.
    [ 2.397966] systemd[1]: Reached target Encrypted Volumes.
    [ 2.397979] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.398007] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.398017] systemd[1]: Starting Journal Socket.
    [ 2.399149] systemd[1]: Listening on Journal Socket.
    [ 2.401583] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 2.403905] systemd[1]: Mounting POSIX Message Queue File System...
    [ 2.405527] systemd[1]: Mounting Huge Pages File System...
    [ 2.408780] systemd[1]: Starting Apply Kernel Variables...
    [ 2.411521] systemd[1]: Starting Load Kernel Modules...
    [ 2.412983] systemd[1]: Mounting Debug File System...
    [ 2.414590] systemd[1]: Starting Journal Service...
    [ 2.417662] systemd[1]: Started Journal Service.
    [ 2.433299] systemd-journald[162]: Vacuuming done, freed 0 bytes
    [ 2.435074] FS-Cache: Loaded
    [ 2.440406] RPC: Registered named UNIX socket transport module.
    [ 2.440408] RPC: Registered udp transport module.
    [ 2.440409] RPC: Registered tcp transport module.
    [ 2.440410] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.447341] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.499590] EXT4-fs (sda1): re-mounted. Opts: discard
    [ 2.506850] systemd-udevd[194]: starting version 208
    [ 2.555760] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.557761] EDAC MC: Ver: 3.0.0
    [ 2.558785] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
    [ 2.558826] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
    [ 2.558833] EDAC i7core: Driver loaded, 1 memory controller(s) found.
    [ 2.561181] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [ 2.561185] ACPI: Power Button [PWRB]
    [ 2.561282] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 2.561284] ACPI: Power Button [PWRF]
    [ 2.562026] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
    [ 2.562028] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.562033] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
    [ 2.562034] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.562037] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
    [ 2.562037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.562038] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.574791] sky2: driver version 1.30
    [ 2.574869] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
    [ 2.574921] sky2 0000:06:00.0: irq 68 for MSI/MSI-X
    [ 2.575108] sky2 0000:06:00.0 eth0: addr 90:e6:ba:91:6a:49
    [ 2.575167] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
    [ 2.575214] sky2 0000:04:00.0: irq 69 for MSI/MSI-X
    [ 2.575371] sky2 0000:04:00.0 eth1: addr 90:e6:ba:91:6a:48
    [ 2.579129] wmi: Mapper loaded
    [ 2.584708] snd_hda_intel 0000:00:1b.0: irq 70 for MSI/MSI-X
    [ 2.589184] [drm] Initialized drm 1.1.0 20060810
    [ 2.607958] MXM: GUID detected in BIOS
    [ 2.607980] checking generic (f9000000 760000) vs hw (c0000000 20000000)
    [ 2.607980] checking generic (f9000000 760000) vs hw (f8000000 2000000)
    [ 2.607981] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [ 2.618625] input: PC Speaker as /devices/platform/pcspkr/input/input2
    [ 2.623682] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
    [ 2.625125] platform microcode: Direct firmware load failed with error -2
    [ 2.625126] platform microcode: Falling back to user helper
    [ 2.627786] Switched to clocksource tsc
    [ 2.643327] iTCO_vendor_support: vendor-support=0
    [ 2.644034] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.644062] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
    [ 2.644512] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.644929] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
    [ 2.644943] platform microcode: Direct firmware load failed with error -2
    [ 2.644944] platform microcode: Falling back to user helper
    [ 2.647197] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
    [ 2.647209] platform microcode: Direct firmware load failed with error -2
    [ 2.647210] platform microcode: Falling back to user helper
    [ 2.647

Maybe you are looking for

  • How do I move photos in iphoto for ipad from album to album ?

    how do i move photos in iPhoto for iPad from album to album ?

  • Iweb 3.0.3 upload issue

    Hi Guys, I have tried to upload iweb to mobile me since last night. But I always got the " an unknown error occurred" response. Does anyone know how to fix this problem?

  • IMessage stuck at sending

    I have an iPhone 5s, runs on straight talk. Has been working fine for a few months now and I had it on iOS 7.1 until this morning when every IMessage I sent got stuck at "sending..." I updated to iOS 8.1 and it fixed the problem, and now it's happeni

  • Adminserver does not start after deleting oim_server1 from the console

    Have deleted oim_server1 from weblogic console and. I wanted to reconfig oim but can't extend the domain anymore as OIM is greyed out. Please help: Can't start Adminserver anymore too: WARNING: Error registering the bulk operations MBean. java.lang.I

  • Flash movie using XML

    On the development version of a site, I have created a flash movie that uses an XML file that refers to the filenames of images and their respective captions that are then loaded into the flash movie. The images are loaded 2 at a time, into movie con