M90p - Error 0189 Cannot read the security EEPROM

Hi,
I have a Thinkcentre here that says during POST:
Error 0189 Cannot read the security EEPROM
It then prompts me to enter the BIOS, but no matter what I try, I cannot get rid of the message and boot to the OS.
What should I do?
BTW, what is the header labeled "ME_Disable" on the motherboard?
Thanks,
Smith

Hi! I with have problem 0189 Error. How to fix it? Pls.

Similar Messages

I am unable to copy my contact which are in *.vcf format in my pc to my icloud. error shows cannot read the vcard. help

i am unable to copy my contact which are in *.vcf format in my pc to my icloud. error shows cannot read the vcard. help

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

ITunes error: iTunes cannot read the contents of the iPhone...

Everything was working fine for me today and then this happened. The only change is there was a software update for iTunes. I've updated and restarted the iMac once before and once after the update. Am I going to lose all my stuff???

Did you every get a fix on this?
Thanks

HT4106 Cannot read the connected storage media error comes when I connect my SDHC card using apple camera connection kit

When I connect SDHC card using iPad camera connection kit I am getting error message 'cannot read the connected storage media'

I know you have to have your pictures in a folder called DCIM on the card.

Keep getting "itunes cannot read the contents of the iPad" message when connecting my iPad 2 to Windows XP

Hi all,
I have an iPad 2 that I purchased in late 2011. I have a Windows XP PC. Of late, I have not been able to connect my iPad 2 to iTunes on my Windows XP (Service Pack 3) desktop. I keep getting the popular error "itunes cannot read the contents of the iPad. .... restore factory settings" message. I have tried re-installing latest iTunes altogether after fully uninstalling and removing registry entries. But it still keeps giving the same message. I have tried all the steps given here - http://support.apple.com/kb/TS1538 , except checking with a different USB cable. My cable however works well while charging. My system however seems to detect the iPad as camera. I desperately need some help to fix this.
Thanks,
Paddy

Worked for an iPad 4 (Retina) running iOS 7.0.3. connected to a Mac (Mavericks, iTunes 11.1.2). Although the file system is a bit different than what is shown on the video, the basic same steps can be carried out: download iFunbox (for Mac, obviously), go into "Raw file system", then "iTunes_Control" (you may want to switch to list view to see the complete name), then iTunes. There there was no iTunesDB file but I deleted iTunesCDB (was 0kB, expect that might have been the problem) and iTunesControl (0kB as well). Also deleted the Music folder in the previous directory.
After that I disconnected the iPad from iTunes, quit iTunes, relaunched, and it started sync'ing :-)
Note that now it's telling me that it cannot sync because an additional 10GB is required! Not sure what the problem is because the bar at the bottom of the iTunes window says it still has another 4GB available. I'm expecting there's a problem with how the size of the music is calculated (perhaps because I also sync Genius playlists and mixes), so I disabled music sync'ing for now so it can complete it once. Then I'll hand-pick the music again and hope it works!

Itunes cannot read the contents of the iphone

Problem: iPhone cannot synch with iTunes b/c of the error: "iTunes cannot read the contents of the iPhone "iPhone". Go to the summary tab in iPhone preferences and click Restore to restore this iPhone to factory settings". I have reset the iPhone all possible ways, rebooted, uninstalled/installed iTunes, have double clicked to change name, doesn't synch. I need to get my music and photos back on my device, but I cannot seems to do so. After clicking restore, it blows the device away, then I still get the error. Help?

I'm have the same problem... just updated to iOS4 on my 3G. Everything synced fine after a few problems with the backup process. The only data that was not transferred was my music to iPod. When I hooked back up to download the music I received the "iTunes cannot read the contents of the iPhone" I have not restored back to the factory settings. Any suggestions... I don't want to lose the data on the phone.

ITunes cannot read the contents of the iPhone/iPad -restore to factory set

I've had this issue with my iPhone for almost a year now , every time I connect my device to my laptop I get this error : iTunes cannot read the contents of the iPhone/iPad . Go to summary tab in your device and restore to factory settings ! And after I do so , iTunes tries to synch my device and after a few minutes i get this error that theres been a problem with synching and the same story again , restore to factory settings ....
I thought well there is something wrong with my iphone and I was too lazy to get it checked out but yesterday i bought my new iPad 16GB 3G/WiFi and guess what ... Same error !
I've tried different cables and computers changing my OS , reinstalling iTunes and so far nothing ...
I'd appreciate if someone can help me with this

Dwchico,
Hopefully I can help you. I had the very same problem from the get-go. Apparently, many others in the forums have as well. The problem appears to be something with the way certain motherboards mount USB devices. In particular, Asus motherboards have difficulty mounting iPad. If you are using an Asus based system, most have updated BIOS's that address the issue. I updated my BIOS today for my Asus G51J laptop and the problem disappeared completely. If you have an iPhone, you probably weren't having any problems, right? iPhone does not appear affected by this problem.
Best Regards,
Gameshow

"Cannot read the contents"

I plugged my 80 GB iPod into my friend's computer to charge it, but I didn't realize he had iTunes version 4-point-something. When I unplugged it it couldn't find any music or videos that I had on before. Plugging it into my computer I got the error "iTunes cannot read the contents of your iPod" and it suggested that I restore default settings and erase all my data. The strange thing is, when I plug it into my friend's computer with the older iTunes, it can find and play all of my music. The files are all still on there, and they can't be corrupt because they're still working. Now I'm just wondering what I should do. Is there some way I can create a backup of all my files? Not all of them are on my computer, and most of my renaming and album art adding I did directly on my iPod, not on my computer. I'm okay with restoring my ipod, but I don't wand to lose all those files.
If I just go into the ipod hard drive directly and copy all the files over, and then restore the settings and copy it back, will I have any problems?

simmilar problem
I have music from other peoples computers in my hard drive, ive tried to thread through and delete but some still remains. my i pod had about 200 songs loaded onto it but the other like 1000 wont. the selection seems to be random. with artist c-p. ive tried restoring, with no effect.

TS2771 itunes cannot read the contents of the ipod

Has anybody found a way to fix this error? I have restored my ipod several times, but keep getting the error every week.

I am having the same problem as the original poster on my IPOD CLASSIC. Here is a link to the product page on IPOD CLASSIC for those who may not know what it is.
I keep getting the error over and over. I am able to successfully reformat the device, and reinstall all my tunes etc. and everything's good. I do nothing in particular, maybe listen to a podcast. A week later, the tunes and podcasts are GONE and the iPod says there is no music, however all my photos are present. I plug it in. My disk data is present (I have it enabled for disk use) however iTunes blows the following error.
iTunes cannot read the contents of the iPod “MYPOD”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
Here is the SMART data for the iPod Classic's internal hard drive.
Retracts: 7
Reallocs: 0
Pending sectors: 0
PowerOn Hours:2849
Start/Stops: 7201
Temp: Current 32C
Temp: Min 9C
Temp: Max 51C
(those are very good numbers by the way, indicating a healthy drive.)
Any ideas? This started happening constantly several months ago, If I recall there was an iTunes update around that time.

ITunes cannot read the contents of the iPhone (repetitive)

I've been syncing my iPhone 4 on my computer without issue since launch.
Yesterday I plug it in an get:
"iTunes cannot read the contents of the iPhone"
The only option is to restore. After trying a number of things, different USB ports, removing other USB devices, restarting the PC and Phone I finally give up and restore the phone. A pain since I loose all my folders and page layouts, not to mention the time to sync all the music and apps over, but fine, it's back up and running and everything syncs.
Then I plug it in again today and the same error:
"iTunes cannot read the contents of the iPhone"
Only recent change to my system between iTunes working and iTunes suddenly failing to read my phone is updating iTunes to 10.0.1.22.
Any ideas, I'm not excited about the idea of having to restore my phone every time I need to sync with the PC.

I'm having the exact same issues. It all started shortly after iTunes 10.2.1 was released. Since I could not get it to work at all I even sent my phone to be repaired and got a replacement device.
I restored it from a backup and at first everything worked again but after a few days I started getting the same problems again.
To shorten the story: I am now using iTunes 10.2 and iOS 4.3.1, I have even deleted all my backups and reconfigured my iPhone entirely after a reset in the process and still gotten the error message after a few syncs. I have tried deactivating my USB controller and it worked yesterday, today it doesn't.
The strange thing is that it has been working perfectly for 4 months before all that. I've read in some forums now that this problem can be fixed easily on a jailbroken phone by deleting some iTunes library file on the phone but I don't want to lose my warranty and therefore this is not an option.
If it's so easy to fix, why doesn't Apple provide an easy solution?

ERROR : Cannot read the request body while creating new calendar event api.

Hi,
I was trying to create and update the calendar event using [POST] https://outlook.office365.com/api/v1.0/me/events and [PATCH] https://outlook.office365.com/api/v1.0/me/events/<eventId> respectively.
When i try with poster or postman, I get this error
{error: {code: "ErrorInvalidRequest" message: "Cannot read the request body."} }
its not working . Any help will be appreciated.
Note: GET events and DELETE Events are working. I think the API with payload is not working.
Test Data :
URL: https://outlook.office365.com/api/v1.0/me/events/
Method: POST
JSON Data(Payload):
"Subject": "Discuss the Calendar REST API",
"Body": {
"ContentType": "HTML",
"Content": "I think it will meet our requirements!"
"Start": "2015-01-06T07:03:07.481Z",
"End": "2015-01-05T07:03:07.481Z",
"Attendees": [
"EmailAddress": {
"Address": "[email protected]",
"Name": "Konveen"
"Type": "Required"
Error:
"error": {
"code": "ErrorInvalidRequest",
"message": "Cannot read the request body."

Hi Sahil,
I was able to make your request work fine against my Office 365 mailbox with 2 changes.
1. Can you please make sure you are adding header "Content-Type: Application/Json"?
2. Can you please make sure your end time is AFTER start time? Looks like there is a typo with your current request as the start time is on 2015-01-06 and end time is on 2015-01-05.
Hope that helps ...
Thanks,
Venkat

Error message: "iTunes cannot read the contents of the iPod."

I wanted to get my dad a new iPod for Xmas and transfer all his music from his ancient Classic. But when I connect to my MacBookPro, I get the error message: "iTunes cannot read the contents of the iPod." I see that 90% of the ipod drive is used, but I don't see any songs listed either on the iPod screen or in iTunes, which is worrying. Is there anything I can to save the music? He will be so upset that it's all gone...

My suggestions, when Restoring the iPod.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC.
Disconnect all other USB devices, except the mouse and keyboard.
Stop all other programs except iTunes.
Good Luck!

I upgraded iTunes to 11. I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50). How do I correct this error?

I upgraded iTunes to 11. I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50). How do I correct this error?
Thanks
TDB

I know this doesn't help you Bud, but I've had this issue for at least the last couple of versions. If I can ask, what is you enviornment like? Local PC only, libray saved on another PC/Server?
In my case my library is on Windows 2003 server with the share mapped to drive M: This has worked for many years through both XP and Windows 7 until and update a while ago.
Thanks,
Rob

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Try this. This is for CS6 but substitue CC and Bridge 6.
~library/caches/Adobe/Bridge CS6 and inhere should be 2 files:
Adobe Bridge Plug-in Cache
and the folder called Cache. Inhere should be 4 folders called '254', '1024', 'data' and 'full'
All those folders carry the content of the respective quality of the thumbs and preview as well as 100 % cache and Bridge database.
Any way, Since you have not used Bridge you have no relevant amount of cache and I would suggest you quit both PS and Bridge and manual delete both the items (plug in and folder called cache at the end of the Bridge CS6 path mentioned above.
(both files will refresh itself after a restart of Bridge).
To be on the save side also visit in same user library the folder Preferences and look for the file called "com.adobe.bridge5.plist" (yes it is Bridge 5 that comes with CS6, all Adobe apps have their own version number and they are presented in the same Suite version. CS6 has PS version 13 and Bridge version 5 )
also drag this file to the trash.
Then hold down option key (alt) while starting Bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.
Choose reset prefs and try again.

Suddenly, I am seeing an error message that reads: "The iTunes Library cannot be saved. An unknown error occurred (-54)". Can anyone tell me what that means?

Suddenly, I am seeing an error message that reads: "The iTunes Library cannot be saved. An unknown error occurred (-54)". Can anyone tell me what that means? Am I in danger of my iTunes library being lost?

== Error -54 ==
From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
First, try simply restarting your computer.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

M90p - Error 0189 Cannot read the security EEPROM

Similar Messages

Maybe you are looking for