M92p HELP!!! About to return 6 new M92p due to Problems with two monitors.
Hope someone can help. Just unpacked last week six (6) brand new M92p with dual 24" monitors. Unfortunatelly the monitors are NOT from Lenovo since Lenovo does not sell color calibrated monitors.
The problem we are having is that we have tried connecting the two monitors using different conbinations of the 3 or 4 available video connectors on the back of the machine.
only ONE monitor works at 1920x1200, the other defaults to 640x480.
All the machines have a video card with 2GB. The video card has a DVI and a VGA port. The motherboard has VGA and DisplayPort. We tried one cable to DVI on video card the other on VGAon video card. Then we tried One cable on video card another on motherboard.
I also disable the motherboard video in BIOS; that did not work either.
NOTHING works!!! I am about to repack all these equipment and send them back.
If anyone has any solution to this issue, please let me know.
Thanks!
Possible driver issue. Have you run Windows Update and Lenovo System Update?
Also, beware of the BIOS settings for multi-monitor: http://support.lenovo.com/en_NL/downloads/detail.page?DocID=HT062228
Similar Messages
-
Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.
Hey 1Jerry,
Thanks for the question. You'll want to delete and re-add your iCloud account (utilizing the new Apple ID address). When prompted, opt to keep as much information on your device as possible. The following article provides information on how to do so:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, tap Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Thanks,
Matt M. -
I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best. -
Potential problem with my monitor, please help.
Hello
I recently upgraded my OSX to Mavericks and I've been having problems with my monitor, I've attached a screenshot of what is happening because I didn't know how to explain it and I'm unsure if its the OSX upgrade causing the issue or not, however I'm really worried about my monitor on my macbook pro.
The model I have is the 15" mid 2010 2.4Ghz Intel core i5 with 4GB RAM.Still having this issue with my macbook pro monitor... There was no updates available and I followed every other possible solution, sometimes my monotor looks perfect like there was never any problem and other times my entire screen is just covered with this stuff you've seen in the above image.
I really have no idea what the exact issue is and how to solve it.
This macbook was given to me for university by the government as I have a form of dyslexia and because I've just finished my degree the insurance has ended... is there anyway I can still buy applecare insurance for my machine?! I got this MBP in 2010 so I've had it for three years now.
I'm just worried that one day I'll turn on my machine and the monitor won't work whatsoever.. and I thought apple was suppossed to be good and last a long time.
Hope somebody can help me further.
Thanks. -
Every time I try to install itunes on my PC I get the following message, and I can't seem to find a solution. Any help out there?? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run."
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan HoedtDoes the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB -
The new Firefox is having problems with imd
the new Firefox is having problems with imd
This is a duplicate. See -
https://support.mozilla.com/en-US/questions/834031 -
Import/Export pdf help - about to return the program :(
I bought the program because I was told I can import a pdf and export it as a pdf/x-2002. I have read through threads and troubleshooting tutorials and I have not seen anything on how to do this. Please help! I'm about to return the program.
You can place PDFs into InDesign, and InDesign can export PDF/X3-2002, but if converting the format (without any editing) is your only goal, you may want Acrobat Pro instead. If you do need to edit the files, you should get the native files; PDF is meant as an end product, not a working file.
-
Trying to update my itunes to the newest version 10.5 but stops and tells me "there is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
so i tried to uninstall and download from site and still got the same error..
then tried a system restore to get my old itunes back and now the Itunes icon wont do anything...
Windows support wasnt much help either..
anyone? please?the link from d6d24r94 who was the first person to respond fixed my problem. heres the link ---->
http://apple.com/itunes/download -
I have a new Mini and updated software. My monitor will keep flashing back and forth, shrinking the display and not allowing me to work. Sometimes clicking the mouse helps, sometimes clicking into the screen but it freezes up and won't allow me to work. Is this a monitor problem or is there some bug in my system.
Try just holding down on the power and home buttons to restart it. Thomas R. doesnt know what he was talking about. The tool is not made for jailbraeking and is not related to jailbreaking. If you want to get the link again, let me know, as I reapir iPhones, have been using it for years, nad it does NOT void your warranty. It simply reboots your device.
My apologies for all of the new people on this site who are novices to anything beyond iTunes or the device itself. Hopefuly your problem is solved. -
New to Jdev: having problem with Helloworld class and the jsp
Please, i went through the beginner's tour at oracle site and it has been interesting.
After putting the class name as Hello, the package name as "mypackage1" as in the example, then the extend field as java.lang.object There is always an error saying that "java.lang.object is not a valid base class for this option". Please what can i do, cos it's delaying my practise.
secondly, practising the jsp stuff is also interesting, but it's not showing the web preview. i mean after designing the stuff myself, it's giving some compilation error.
What can I do.
ThanksHello,
1- Are you running the "Building Your First Program with JDeveloper 10g" located at
http://www.oracle.com/technology/obe/obe9051jdev/FirstStep/FirstStep.htm
If not, is it working for you ?
2- Which exact version of JDeveloper are you running ? (Help -> About)
You should be running JDeveloper 10.1.2.x.x
You can get Oracle JDeveloper 10g (Version 10.1.2.1, build 1913) at
http://www.oracle.com/technology/software/products/jdev/index.html
look for the chapter "Oracle JDeveloper 10g Production".
3- Try re-installing JDeveloper (uncompressing the zip file) into a different
path (ex: C:\JDeveloper10g) and retry the first steps.
I've retested the "First Steps" against my Windows XP SP2 and it works just fine.
Regards,
Steff -
Won't backup due to problem with username or password.
When my machine sits idle, frequently I will get a message that the time capsule didn't backup due to a problem with user name or passwork. When I am using the computer it backs up fine.
Hi Royb,
first i excuse myself for my english...its not too bad but sometimes i make mistakes... however
perhaps you can help me with my problem as well. i did the log file as well and i suppose its something to do with the ipod functions in itunes. everywhere in the logfile where the pattern "2330" matches is something like this:
MSI (c) (A0:08) [21:33:37:187]: Note: 1: 2330 2: 23 3: C:\Programme\iPod
MSI (c) (A0:08) [21:33:37:187]: Transforming table Error.
DEBUG: Error 2330: Error getting file attributes: C:\Programme\iPod. GetLastError: 23
Bei der Installation dieses Pakets ist ein unerwarteter Fehler aufgetreten. Es liegt eventuell ein das Paket betreffendes Problem vor. Der Fehlercode ist 2330. Argumente: 23, C:\Programme\iPod,
AppSearch: Eigenschaft: EXISTINGINSTALLDIR, Signatur: Locate_EXISTINGINSTALLDIR
AppSearch: Eigenschaft: EXISTINGIPODINSTALLDIR, Signatur: Locate_EXISTINGIPODINSTALLDIR
in case the german language causes problems with the analysis i tried to translate it into proper english:
MSI (c) (A0:08) [21:33:37:187]: Note: 1: 2330 2: 23 3: C:\Programme\iPod
MSI (c) (A0:08) [21:33:37:187]: Transforming table Error.
DEBUG: Error 2330: Error getting file attributes: C:\Programme\iPod. GetLastError: 23
During the installation an error occured. Maybe there is a packet problem. The error code is 2330. Arguments: 23, C:\Programme\iPod,
AppSearch: Attribute: EXISTINGINSTALLDIR, Signature: Locate_EXISTINGINSTALLDIR
AppSearch: Attribute: EXISTINGIPODINSTALLDIR, Signature: Locate_EXISTINGIPODINSTALLDIR
I hope this helps...
It would be very nice if you help me, otherwise i see no other way than formationg windows...and i hate that...thats why mac is better -.-
however plase help me and if it helps i can send u the hole logfile. =)
thank alot!
moe -
HELP!! asa 5505 8.4(5) problem with port forwarding-smtp
Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: endHi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks -
ITunes won't open due to problem with audio configuration
Out of the clear blue iTunes will not open any longer. I get a gray message screen that says iTunes can't open due to
an audio configuration problem. Any answers for this???iTunes can't open due to an audio configuration problem.
That one is most commonly caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
The following document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Maybe you are looking for
-
How to publish BI Workspace in sharepoint?
Hi All, I have created 1 BI Workspace report and saved in repository , i want to publis the which i created Bi workspace in sharepoint. is is possible ? Please any one can help me? Thank you, Regards, Venkat
-
How much cost a keyboard backlight replacement ?
Hi, I just spill coffee on my MacBook pro (mid 2010). I was lucky, everything working fine, except the keyboard backlight :/ How much is it to replace it in a apple store ? Thanks
-
Change background color ? - Too dark !
Is it possible to change the colors of the interface in LR 1.3 ? I think the grey are too dark and makes it hard to see. I think I can changes it in the "edit - preferences - interface" menu, but I can't seems to make the background lighter. Can some
-
I'm tryong to download Itunes on my Dell ,with Windows7. I attempt the downlod. I get a message saying "Thanks for downloading Itunes" but Itunes does download
-
Is there an older version I can install for Premiere Pro in the CC?
Apparently the Pr App does not appear in my CC Download because of my computer specs. Windows 7 Intel Core Duo The reason we join in to CC is because of Premiere and the app can not even be installed in my computer, so is there a friendly version I c