M93p drivers for imaging

I am trying to make a Windows 7 Professional x64 image, which I intent to deploy with a WDS server. I use dism from WAIK to inject the drivers into the boot.wim, taken from a Windows 7 iso. When I PXE boot and selects the Windows 7 boot image on my WDS server I get the following error:
Windows client: An error occurred while trying to start the network: There was not found a similar network card in this image. Get the administrator to add the network adapter for this computer to Windows PE image on the server for Windows Deployment Services.
This error comes with a fresh boot image, to resolve this error I download the ethernet lan driver from lenovo support for the model-type 10a9-0011mx choosing Windows 7 and Networking: LAN (Ethernet) and downloading the Intel driver. After adding the driver I try PXE boot again and gets the same error.
During the injection dism fails because some of the drivers are not digitally signed and I have to use the /forceunsigned switch to complete the injection. Is there an issue with the Windows 7 drivers? I have no problem creating Windows 8 or 8.1 images.

yes
"Marcus Breiden" <[email protected]> wrote in message
news:800c1uac8u98$.[email protected]..
> On Fri, 14 Dec 2007 21:03:06 GMT, Mberg wrote:
>
> > We have just received 150 new laptops that need to be imaged and I am
going
> > to have to add a certain nic driver. Does anyone know how to acomplish
that
> > and where would I get these drivers. They are ibm r61i lenovo notebooks
that
> > are going to have windows xp on them.
> > Any help would be greatly appreciated.
>
> are you running 6.5 with the latest service packs?
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please remove the - in my e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.didas.de

Similar Messages

Satellite A200-1DN - WXP Network Drivers for Imaging

We have (by a prior employee) a number of Toshiba Satellite A200-1DN Laptops.
As there are many, we intend to image them to reduce the labour overhead for updates and maintenance etc.
However, Despite the WXP drivers being finally released, they do not contain instructions as to which files
to put into an image so that the network drivers work.
Any help or pointing to a set of instructions are much appreciated.
R Price

Hi
It looks like the Satellite A200-1DN would belong to the PSAE0E series.
You have to choose the XP drivers exactly for this A200 series. Thats important!
As far as I know the notebooks supports also the LAN Chip from Realtek RTL8101 Family Fast Ethernet.
If you want you can try to install the original XP driver from Realtek website. This one should also run.
Good luck

Adding network card drivers for imaging

We have just received 150 new laptops that need to be imaged and I am going
to have to add a certain nic driver. Does anyone know how to acomplish that
and where would I get these drivers. They are ibm r61i lenovo notebooks that
are going to have windows xp on them.
Any help would be greatly appreciated.

yes
"Marcus Breiden" <[email protected]> wrote in message
news:800c1uac8u98$.[email protected]..
> On Fri, 14 Dec 2007 21:03:06 GMT, Mberg wrote:
>
> > We have just received 150 new laptops that need to be imaged and I am
going
> > to have to add a certain nic driver. Does anyone know how to acomplish
that
> > and where would I get these drivers. They are ibm r61i lenovo notebooks
that
> > are going to have windows xp on them.
> > Any help would be greatly appreciated.
>
> are you running 6.5 with the latest service packs?
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please remove the - in my e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.didas.de

Hp pavilion tx2110us drivers for windows 7

hello,
i have a hp pavilion tx2110us entertainment notebook (tablet). i recently upgraded from vista home to windows ultimate. i have a few issues with this. i would be very happy if someone could help me here.
1. the tablet buttons (on the side of the scree dont work), just the settings one works...the rotate, the dvd one dont! i had installed some driver seeing the forum but it only solved a part of the problem. i.e. the settings button for tablet. can i find the drivers for it somewhere??
2. there is no fingerprint recognition any more. though its not a big problem but i feel i am not getting what i paid for...;-)
3. the images when opened in fax viewer or anyother prog seem stretched. i tried to set the screen resolution but it shows on the highest. my driver should be nvidia but currently it is standard vga. where can i find the driver for this....it is not on the hp site....i have a 32 bit os.
4. even the software updates avalaible on hp site dont work some how. i even tried the vista ones but it says it cant load them as i have windows 7.
thank you.

shubhijk wrote:
i dont have an active connection on my laptop. as in i cant be on net for too long to get windows updates. is there a way to download the display driver other than updating my drivers from the internet?
So we will install network drivers to solve this problem.
Install as first driver for chipset / lan card:
NVIDIA nForce Chipset/Network here
After installtion of this driver You need to restart your system. This is very important.
Driver for wireless card:
Broadcom wireless here
Both this drivers are normally on your support page for Vista system, but they will work great under Windows 7 too.
Only If for some reason wireless driver will not work great then uninstall it first and install latest version released by HP:
Broadcom Wireless here (ver 5.60.48.35 for 32/64 bit Win7)
Resource:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Most of Vista drivers should work under Windows 7. You may find all of them here.
When normal installation will fail, then try to run unsuccessfully installed file in Compatibility Mode (Windows Vista, Windows Vista Service Pack 1 and Windows Vista Service Pack 2).
Resources:
Make older programs run in this version of Windows
How to Run a Program in Compatibility Mode in Windows 7
If even this will fail then use Windows Update as I said before and install drivers from optional section.
I don't have much knowledge about tablets, but according to other post on this board Wacom Digitizer Driver solves problem with rotation.
This answer was wrong. According to this topic solution on problem with rotation is installation of HP Quick Launch Buttons and Graphic driver.
Important informations!
You've got nVidia graphic card and AMD processor. Because of that You should check temperature of your GPU.
If it's high then You should install driver for graphic card from Windows Update as fast as it's possible.
How You may check Your notebook CPU (processor), GPU (graphic card), motherboard or HDD temperature?
To do that use HWMonitor (free and recommended).
PS.
If You will still have any problems then let me know about it.
I will try to help You.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Windows Vista Drivers for 1820 and 1616 - Lets have some drivers ple

RePost from http://www.productionforums.com/view...?p=47643#47643<img alt="" src="http://www.productionforums.com/images/icons/icon8.gif[/img]?Lets have some drivers please
<span class="postdetails">Windows Vista Drivers for 820 and 66
I hate to say this about E-MU but the way they are dealing with Vista Drivers is unprofessional. I am a repeat customer of Creative products and was so impressed by my old Platinum eX that I bought a second to run duals for tons of audio processing. That was back in the day. Then I jumpped ship and tried out an M-Audio Firewire 40. That did not last too long beforei was completely unimpressed. So I came back to Creative... Purchased a 820 in the box. So impressed I turned around and purchased a 66 in the box just 8 months later. Both ran smooth as butter... All until i just recently built my new system designed primarily with audio production in mind.
With a setup like this, who needs a mac?
AMD Athlon X2 x64 Dual Core +6000 3.0 Ghz
2 Gigs Corsair
Samsung SyncMaster 206BW 2" Wide Screen
EVGA NVidia 9700s 256 DDR3 Graphics
SATAs up the yin
and a PCIMIA to PCI Dock
All under Vista Ultimate OEM
And Guess what?
Months into RTM of Vista...
E-MU is caught pushing release dates.
Last month it said they would release beta drivers middle of April...
I waited, patiently I might add.
I waited<waited some more, I try running xp drivers... computer wont even try to install them properly.
My software waits, computer waits, turns into a gameing machine just because my all together 600 dollar investments in Creative are not important enough to leld me the drivers i need to be producti've in what i love.
I need x64 drivers stat. I need them working, I need them installable without a glitch, a hitch, no driver signing problems, no questions, no fuss no muss. I find it ironic that you guys at E-MU are willing to jump right in there and make sure to have drivers compatable for you new products, yet faithful advocats of the most powerful soundcards you have are sitting here dead in the water because you dont find it nessesary to place priority on ready and waiting end users who have purchased long term support buy investing large amounts of moola into hardware from your company.
Come on, its not like the 820 or the 66 are exactly legacy technology. We are talking about Hardware that is only two years old and should be usable for up to 6 years. This is deffinatly a strike against the company and just goes to show where Creative stands.
I have stood by waiting in silence for a very long time.
Now i think my time has come to tell how i feel and i believe there are alot of others out there that feel the same. the only items that do not work soothly are my E-MUs... go figure.
And I have been looking forward to all i can do running both of them side by side.
Oh yes, and that link posted above to the beta news for vista... its a joke. open up your betas, and have a real dev tell us what the hang ups are... At least give us real concreate reasons why it is taking so long.
with that said, when you guys get yoru act together and get me some drivers, I will sit happy as a lark.
My thoughts for today.
~Alpha-Beta ReaKKtor

Hello Silas,
sorry for my bad english
I already checked that page. On the first time I was trying to install Vista on a clean hard drive. The installation process finishes without errors but after installation Vista shows me a lot of error messages, mostly about unknown hardware. So I installed all available drivers I have found on Toshiba web site. It not helped me too much, hardware problems still remains. I could not find out what exactly causes probles. Finally I decide to install XP and then upgrade to Vista. Now everything seems to be ok. :D
There was some hardware problems but much easier to resolve. It seems to me that Toshiba did not provide all the drivers, for example StarForce Protection drivers. Vista did not recognized this hardware on the first time.
Now it works!

Where are the Vista drivers for Qosmio X300

I have bought a qosmio x300 with q9000 quadcore and SLI 9800m gts
A nice notebook.
i have install on this notebook vista ultimate ( the notebook is sell with vista premium).
but, i don't have the drivers ...
ok, i search on toshiba web : usa, taiwan, australian, canada, french, europe, etc...
but i search all the drivers : toshiba hardware setup : all the version that we can find on toshiba web's site are wrong...
and a lot of drivers are same.....
so where can i find the drivers for my notebook ??

There are no good or bad drivers. Maybe you do something wrong.
The fact is that all drivers listed on Toshiba support page are absolutely the same as in recovery image. So there is no difference and all of them can be used on every Vista version.
By drivers, tools and utilities installation is important installations order. So please install and configure Vista following this installations order:
Windows Vista
Intel(R) Chipset Module
Intel(R) Turbo Memory Driver(Intel iMSM Driver)
nVidia Display Driver
Realtek Audio Driver
Realtek Network Driver
Alps Touch Pad Driver
Synaptics Touch Pad Driver
Jmicron CardBus Controler
TOSHIBA Software Modem
Modem Driver
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
Flash Cards Support Utility
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA Assist
TOSHIBA Speech System
Dolby Control Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer
TOSHIBA TRS Driver
HDMI Control Manager
TOSHBA Face Recognition (SmartFaceV)
I hope this list will help you.

Windows 2008 Server, M93P Drivers

We recently purchaced a M93P for server, we installed windows 2008 server on it and there are 6 drivers missing. I've searched for then on the Lenovo website with little luck. Does anyone know where I can find drivers for the following
Ethernet Controller
PCI Serial Bus
PCI Simple Communications Controller
SM Bus Controller
US Controller
And there's an unknown device, listed as ACPI\LEN4001
Thanks for the help.
-Kallie

Is it possible that I could have a copy of WS 2008 64-bit from you?
Thanks,

Cannot find Win 8.1 drivers for Satellite C50-A-1DV

Hi.
I re-installed windows 8.1 from a disk I have, but I'm having driver problems, namely finding certain driver support on the Toshiba website.
It seem that my laptop isn't listed, or I can't find it in the support section for drivers.
The drivers I'm looking for namely are the motherboard drivers.
I already tried a driver site but my laptop was taking a good few minutes to power off after shutdown so I doubt those were correct. I'll try intel chipset device software and see if that gives me the correct ones.
Rest of drivers I can get simple enough through device manager, but not the chipset drivers, and probably usb 3.0 too.
On a side note, I noticed I don't need to type in the key, which I wrote down using belarc, I assume it's saved to the BIOS and windows auto detects it correct?

Hello
According notebook specification your notebook was delivered with preinstalled Windows 8.1 64bit so what you should do is to reinstall original recovery image that contains all necessary drivers.
When you say you have installed Win 8.1 from the disc, what does it mean exactly?
Have you installed your own OS version or original Win8.1 version from created recovery disc?
Anyway, al Win8.1 64bit drivers you can download from Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
There you can find all drivers for your Satellite C50-A-1DV with part number PSCG6E.
Check it out.

Solaris 10 won't boot up "Cannot load drivers for /pci@400.....

This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up the server? Is there a way to boot into single user mode, mount the filesystem and rediscover the hardware, etc.....

First i guess you have to verify that you can find the disks with a probe-scsi-all
next you can boot it of a CD-rom/dvd into single-user:
boot cdrom -s
.. or similar into single-user from a jumpstart image:
boot net -s
Then you can mount the root disk under something such as:
/mnt
and rebuild the config with:
devfsadm -R /mnt
be careful if you have a mirrored filesystem though, you don't want to update just one of the mirrors without first breaking the mirror..
.7/M.

Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use.

ITunes drivers for importing and burning CDs and DVDs are missing

Hi,
I recently switched from a relatively small drive to a much larger one and had the larger drive taking image of the older drive. All of my older programs are now back up to working but I can still can't burn a CD.
I get the following error message "the registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes a few times and have done soft and hard reboots but still no luck. Any ideas on the simplest way to resolve this matter?
Thank you
this is the result of the diagnostic:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 11.3.0.54
QuickTime 7.7.5
FairPlay 2.6.12
Apple Application Support 3.0.5
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0031B3A80E383418
Current user is not an administrator.
The current local date and time is 2014-08-26 07:06:48.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GTX 570
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.3.0.54 (x64) is currently running.
iTunesHelper 11.3.0.54 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

You posted here --> Apple Support Communities / iTunes / iTunes for Mac
I will request this be moved.

Need WXP drivers for a Portege R500-106

Where can I find XP drivers for a Portege R500-106? Driver download page only has XP WLAN driver and no others.

Hi again
Sorry I thought this new notebook is just Vista preinstalled. Other way I do not understand why you need WXP drivers when you can install recovery image that contains all necessary drivers, tools and utilities. As I can see WXP Pro should be preinstalled on this notebook. Is it not good enough for your work?
By the way: some drivers you can also find on http://209.167.114.38/support/Download/ln_byModel.asp#
Usually if you have European model you should use stuff designed for European models but you can use offered drivers from Canadian download page.

Qosmio F55-Q504 Drivers for XP

Hello everybody,
Please help. I have three questions:
1. May be somebody's already met problems with drivers for XP for F55. I bought F55 with Vista, installed XP but I've found drivers for WiFi and nVidia only and I was not able to find drivers for other devices unfortunately. On the official site thare are drivers for Vista only and there is not BIOS version for XP too. May be somebody knows where I can find them.
2. Together with the laptop there were no any CDs and recovery or reinstallation Vista is possible from HDD recovery partition only. For instance if I'm afraid to break recovery partition by my experiments with XP installation or Vista reinstallation and I want to make copy of the whole HDD to another one or to make copy of one partition. Is it possible? Did anybody try to do that? I tried to copy the whole HDD with Vista or separate partiotions (recovery partitions including) - the new HDD or partition is not loaded. I tried several time - there is no positive result. Is there any copy protection software on Toshiba's HDD? And how to make HDD copy to avoid data lost?
3. F55 has GPS and preinstalled Garmin Mobile PC? Turn-by-Turn Navigation? trial version. While loading the Garmin Mobile asks to enter key. Where can I find the key for this trial version? There are no any CD, sticker or box with the key. And who knows is there email support from Toshiba? On the official site there are some phones only but I can't call them I need e-mail.
Thanks a lot in advance.

Good day,
Thanks a lot for reply and usefull answer.
I downloaded drivers according to your links and some of them were really good. I tried to install some other drivers desighed for Vista and I had a success. Now I have two device only in device manger which are unknown. These are Audio Device on HD Audio Bus (it likes you described, driver for Vista is not suitable) and a SM host controller (I don't know what's that but it's not cardbus controller). I'll try find somthing for them.
And drivers installation arises new questions:
a. Of course my control buttons (fn and dolby, play/pause etc.) don't work. You've written: "And I miss also the program that made the touch buttons work. Seems there is no equivalent for XP. As for Config Free program try to use a XP version of the program that is made for a Satellite A series laptop. For me it worked." Please explain what's Config Free? Before I had thought that to make above buttons operating I have to downgrade my BIOS version. But on the official site there are two BIOS version only and both of them are for Vista. Unfortunately there is nothing for XP. Is it really that Config Free is software which can force control buttons to work without BIOS downgrading?
b. My laptop has 4Gb RAM. First time I installed Vista 32-bit edition and I saw that Vista saw all 4Gb of RAM. After that when I installed XP 32-bit edition I saw that XP saw 2,99 Gb only. I thought that after installation all drivers for my chipset the XP would see the whole 4 Gb of RAM. But now as I said above there are two unkonwn devices only in the Diveice Manager and XP see 2,99 Gb as before. Who knows should I find one more special drivers to allow XP to see the whole RAM or it's impossible for XP 32-bit and I have to install 64-bit edition?
Concernig copy of HDD. I tried to do that by Partion Magic, Paragon Partition Manager, Acronics and Ghost Images. And I tried to connect HDDs by different interfaces (from native laptop controller to external usb and reverse, and from one external usb HDD to another) - nothing. When I'm taking HDD with new installed XP, connecting it through external sata-usb controller to one usb port from one side and connecting another HDD through external sata-usb controller to other usb port from the second side I can do copy of the whole HDD or partition from the first HDD to the second. And new created HDD works and loads good. When I'm trying to repeat the same but with original HDD with Vista and recovery partitions it doesn't work. Moreover some partition managers (e.g. PMagic) see the first partition (which is called "Toshiba" and it's not hidden but with unknown file system) and last recovery hidden partition as invalid partitions and refuse attempting to make copy at once. But even if partition manager doesn't write an error at the beginning (Acronics - the best) and makes partition copies successfully the new created HDD doesn't load. And all advices to recover Vista begin: "boot from recovery cd, choose system recovery.....". I haven't any cd and my recovery utility from HDD offers me to install Vista again without any recovery options. Unfortunately...
Concerning Garmin I wrote to Garmin support and I'm waiting answer from them. That's great that driver for GPS from Vista is suitable for XP too.
Tks for reply and tks in advance.

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

I wasn't aware that VueScan charged a yearly license.
You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column. Select the scanner name and the app will start an overview scan. You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
The above description is when everything is working correctly, which has been the case for me.
Good luck.

Please help. I have just purchased a Mustek A3 usb 2400 scanner and cannot find drivers for maverick

I am very frustrated ... have spent two hours searching for drivers for a driver for this scanner ... no idea what to do.
Would greatly appreciate any help.
Thank you.

I can now see it in Image Aquire ... image capture does not see it nor does VueScan.
Image aquire is a horrible program. It crashes continually.
I still have no idea where the driver files that I have downloaded are. I cant find them anywhere. Admittedly I know very very little about how the computer runs ...I just use the programs. And, I believe reasonably, that when I purchase a product that it will work on my operating system. The business that I purchased from will be open tomorrow and I will ring them. If I cannot sort this out I will have to return it.

M93p drivers for imaging

Similar Messages

Maybe you are looking for