Mac 10.4 Base SDK for CS3 plug-ins only?

I am trying to build a CS3 plug-in on Mac 10.5 with XCode 3.1.2 and InDesign SDK 5.0.4. It works fine if I chooses 10.4 as "base SDK", however, when I tries to use 10.5 SDK, the build failed. Among others, it complains about some duplicate declaration of uint32 between an InDesign SDK header file and a Mac OS 5 header file. This makes me think the InDesign SDK may not be compatible with Mac 10.5 base libraries. It that true? Have you been able to use the similar setup to build a CS3 plug-in? Thanks.

I am a programming newb, but if you build it for 10.4, the plug in should work in 10.5 without recompile. Right? I've built universal apps for 10.4 that continue to work correctly in 10.5.

Similar Messages

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

[svn:osmf:] 15972: ChromeLibrary: adding rudimentary support for loading plug-ins defined in XML.

Revision: 15972
Revision: 15972
Author: [email protected]
Date: 2010-05-08 07:31:24 -0700 (Sat, 08 May 2010)
Log Message:
ChromeLibrary: adding rudimentary support for loading plug-ins defined in XML.
Modified Paths:
 osmf/trunk/libs/ChromeLibrary/.flexLibProperties
 osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/application/ChromeApplication.as
Added Paths:
 osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/configuration/PluginsParser.as

rnair wrote:
I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory.

Can't ck for updated plug-ins. Firefox just circles endlessly.

can't access msn jigsaw puzzles. Wanted to check for updated plug-ins. Fox circles endlessly for up to 2 mins., never connects.

The instructions are not contradictory, since you reported two different issues:
''AliceWyman [[#answer-688813|said]]''
<blockquote>
Your '''Java(TM) Platform''' plugin may be disabled in the Firefox Add-ons Manager Plugins list, since I don't see it in your list of plugins. [https://bugzilla.mozilla.org/show_bug.cgi?id=1130896 Bug 1130896] - Plugin check gets stuck if Java runtime disabled and Java Deployment toolkit enabled.
To enable the Java plugin, see the article, [[Use the Java plugin to view interactive content on websites]] under [https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content#w_enabling-java Enabling Java]. That article also explains how to update Java, if your version is outdated.
</blockquote>
I wrote that because you said you ''can't access msn jigsaw puzzles'' but you didn't give a link to that problem website. I was assuming the problem site needs the '''Java(TM) Platform''' plugin (which is DIFFERENT from the "java deployment toolkit" plugin) to be enabled and working. If the '''Java(TM) Platform''' plugin is outdated and vulnerable you need to update it. The article I linked above has more information.
''philipp [[#answer-688807|said]]''
<blockquote>
hello donnaofmaryland, please try the following: go to the firefox menu ≡ > addons > plugins, set the "java deployment toolkit" to never activate and then try to use the plugincheck page again...
</blockquote>
This advice was to get the [http://www.mozilla.org/en-US/plugincheck/ Plugin Check] page working. Only thing, I just tried that page and it isn't working at all for me. The PluginCheck website could be having problems. You can also update Java by going to java.com directly or you can use the Update option in the Java Control Panel (details in the article [[Use the Java plugin to view interactive content on websites]] which I linked to before).

Mac pro with 16GB RAM for CS3? CS3 cant use more than 3 GB? why

hi
does it make any sense to buy 16GB RAM for a mac pro
only for working with CS3?
i am retouching prof. and in the moment we run CS2 on the mac pro.
later CS3 is in the pipeline.
we ordered 16GB RAM in order to work with HDR images and big file sizes coming from hasselblad h2 and h3 (300dpi, 23 x 23inch, round 50 or 100 layers, filesize 1 - 2GB per image.)
thanks

found this article @ adobe website
thanks for your help!
"When you run Photoshop CS3 on a 64-bit operating system, such as Mac OS X v10.4 and later, Photoshop can access up to 8 GB of RAM. You can see the actual amount of RAM Photoshop can use in the Let Photoshop Use number when you set the Let Photoshop Use slider in the Performance preference to 100%. The RAM above the 100% used by Photoshop, which is from approximately 3 GB to 3.7 GB, can be used directly by Photoshop plug-ins (some plug-ins need large chunks of contiguous RAM), filters, and actions. If you have more than 4 GB (to 8 GB), the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of these extra 2 GB of RAM, the RAM cache can increase performance of Photoshop.
The default RAM allocation setting in Photoshop CS3 is 70%. These settings should be optimal for most users. To get the ideal RAM allocation setting for your system, change the RAM allocation in 5% increments and watch the performance of Photoshop in the Activity Monitor. You must quit and restart Photoshop after each change to see the change take effect.
The available RAM shown in the Performance preferences has already deducted an amount that is reserved for the operating system from the total RAM in your computer. You shouldn't set the percentage of RAM to be used by Photoshop to 100% (unless you are using more than 2G of RAM) because other applications which run at the same time as Photoshop (for example, Adobe Bridge CS3) need a share of the available RAM. Some applications use more RAM than you might expect. For example, web browsers can use 20-30 MB of RAM, and music players can use 20-50 MB of RAM. Watch the Activity Monitor to view the RAM allocations on your computer.
Watch your efficiency indicator while you work in Photoshop to determine the amount of RAM you'll need to keep your images in RAM. The efficiency indicator is available from the pop-up menu on the status bar of your image or from the Palette Options on the Info Palette pop-up menu. When the efficiency indicator goes below 95-100%, you are using the scratch disk. If the efficiency is around 60%, you'll see a large performance increase by changing your RAM allocation or adding RAM."

[CS5] replacement for Configure Plug-ins

It appears that the (truly terrible, at least on the Mac) Adobe Extension Manager (AEM) CS5 is supposed to be the replacement for the "Configure Plug-ins" dialog and the Porting Guide does briefly talk about using it to Deploy plug-ins.
However, if I install my plug-in(s) without using AEM using an alias or directly into the Plug-ins folder then it doesn't appear in AEM at all. This particular plug-in doesn't have a UI so need for my support people to see at least a version number.
Can anyone point to some documentation on how to make your plug-ins appear in the AEM list?
It also doesn't appear that the Debug version of InDesign even appears in the AEM list of applications.

Adam,
We aren't going to force our users to have to deploy using Adobe Extensions Manager and all of the InDesign plug-ins appear there. Maybe I just need to start looking at what they are doing to figure out what is going on.
Thanks for the suggestion though, that is essentially what I did yesterday as a workaround.
Nick

Mainstage 3 for Plug-Ins Only vs Mainstage 2

I use garageband for recording and read that I could use the Jam Packs by just buying Mainstage 2. I don't care about loops, I only want more software instruments to use when I plug my midi drum set in. I need to upgrade my OS to get Mainstage 2, so I ordered an OS upgrade. Now, I see that Mainstage 2 has been replaced by 3 and I do not have the RAM required for 3 (4GB). I do not want to buy RAM now in addition to the OS I didn't even really want to buy. Will Mainstage 2 still be available? Could I just buy Mainstage 3 and only use the plug-ins even if my cpu is too slow for the program itself? Bonus: how many more drum kits does 3 have vs. 2?
THANKS!!!!

Regardless of what happens more RAM is always a good thing... and given how cheap RAM is you should always want to add more.
If you have already bought MainStage 2 it will still be available in the Purchases tab in the Mac App Store app. If you don't have 2 then you can no longer buy it from the store.
You asked if you can use just the plug-ins of MainStage 3 even if your CPU is too slow. The problem with that is that it's the plug-ins that require a fast machine. Launching the app isn't going to be the problem on a slow machine... it'll be as you start to add plug-ins. If you you very sparingly use plug-ins then it should be OK.
Not sure about how many kits as I still need to download the additional content.
Good luck...

FCP asking for Waves plug-ins folder?

Hello
I could not open FCP 5. It's asking where the waves plug-in folder. So, where is the waves plug-in folder? Why is it asking for waves plug-in folder to open FCP? As always, I appreciate your helps. Thanks
Romanz

If you are having trouble starting FCP the issue may well be WAVES security.
I have the Waves Audio Plugins as well. I have had their Native Power Pack NPP for 3-4 years and their security has always been a royal pain!! From Dongles to PACE security I seem to have trouble with it every year or so.
I believe there are two ways to authorize the WAVES plugins these days. On my machine I am using an authorizer - if you have the other method then this won't be the same. I think the other method these days is with a USB dongle again...
Anyway, if you have recently moved FCP from one machine to another or removed your system harddrive to replace it then you will likely have a problem with their security. Waves will not allow FCP to start up and you will need to remove the plugins folder altogether.
Paul

Best sites for FREE plug ins? Or stock footage?

Hello all, I am fairly new to iMovie and I want to spruce up some of my home movies with some plug-ins.
Can anyone point me in the direction of any sites that offer decent cheap (preferably free) plug-ins? Or any good iMovie fan sites that perhaps have more info on this sort of thing?
Secondly, I have seen a few sites that do free 'stock footage' - news clips and the like. For example http://www.archive.org/details/prelinger - does anyone know of any other good stock footage sites?
Hope you can help!

I bet
Boris FX will have what you want.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

Any websites for free plug ins?

Just wondering if somebody can direct me to some sweet free plug-ins for logic pro 8. Gracias!

FreeG by Sonalksis. http://www.sonalksis.com/index.php?section_id=99. I'm surprised how often I use this to boost gain and flip phase when I don't want any colour added.

Why doesn't each 'page's info' adhere to the settings for the plug-ins?

When I check my plugins, add ons, for updates, there are option blocks on the right that set whether or not to "Always Activate" or "Always Ask". My question is- -for every page that opens, there is a "page info" option we can check to see/check what is allowed or blocked under Permissions ... And* what the Permission 'settings' ARE for That* page. Why doesn't EVERY page display the Permissions' settings that we have Already set on the Plugins screen*(?). EVERY page has to have the permissions re-done for EVERY domain/server/site provider. Why* aren't the settings that are set on the Plugins screen Used* AS the 'Default' for every page/domain/site, etc.? Note*- if I DON'T change the permissions to "allow", for certain plugins, the page will not work*.
Also, the "Java Deployment Toolkit 7.0.450.18 10.45.2.18" still* shows as "Vulnerable" After* updating (verified update*). So I found the option to 'Disable' this particular plugin. Now it displays at the bottom of the Plugin page, greyed out. However*... after updating to Java "SE7 U45" (..for 1 [One*] day ONLY, it showed as Up-to-Date, NOT vulnerable, on every 'page info' screen*) ... and Actually, it Still Does show as Up-To-Date after an Update check*..(??)... But on EVERY page info screen the "Java(TM) Platform SE7 U--Vulnerable Plugin!" is displayed (?). How can it be Up-To-Date and OK on the plugin check screen, but show as a "Vulnerable Plugin" on EVERY 'Page Info' screen?

Sorry, RamboTrader ... I Thought I was replying to another guy that had made a suggestion to me*.. (MY bad*) ...
... But I'll try to answer some of your questions ...
1- usually, "yes"* just make sure you Trust that site (if you have anti-virus, anti-malware, etc, and run a scan every week (or so) and Haven't come up with anything quarantined or removed yet, you''re probably safe there*
2- sorry, "yes", there's Always a real danger... that's why we have the anti-everything we have (right?)
3- depends on the site*. A Lot of sites don't need java at all (except to run their ads or commercials... 'targeted' or not). Adobe Flash or Shockwave should be able to handle stuff like youtube, etc (but if it doesn't*, just go into the 'Page Info' Permissions* and Allow the [Vulnerable] Java and see if that fixes it). It more than likely will.
I think it's just a matter of Time* before Adobe* Flash, and practically Every other video app/player may be marked as "vulnerable"... like Java... because every one of them CAN carry a virus or trojan to us in some imbedded format. If JAVA couldn't find a way to stop them* (hackers, etc*) they either ..1-aren't smart enough, or 2-just gave up trying to stay ahead of them... (like the 'ad' says, some-unGodly-percentage-of-machines use Java already ... so They are making Their money*... what more do they need to do, really..?). They don't care* about us or our stuff, as long as we Buy More.... but I'm a bit jaded*.

I need to find a mac media set or files for cs3 production premium

My school bought a site license for production premium cs3 and we think a student stole the mac media set. I contacted customer support and they said that they couldn't help us because the version is to old, they instructed me to ask on this forum. Does anyone have a Mac media set of cs3 production premium they could burn and send me or can someone ftp me the files.

If Adobe Customer Support cannot help you, then there is little that we users can do. It would be illegal to copy any of our Adobe programs to disc and send them out.
You might want to look at ProDesign Tools, and see if they have perhaps a download version of PrPro CS3 in their links (think they are all the "trial versions," and those would not help before CS 5, IIRC, as it can be upgraded from trial to full-paid with the insertion of the S/N).
If you only talked to Technical Support, I would contact Customer Support, which is more geared to sales aspects, than T/S.
Good luck,
Hunt

Adobe download doesnt work for either plug ins or not

No messages come up. all i see is an icon that spins showing something happened. i have error messages in my error console and i dont know how to screen shot, dispute the how to do it page. all i can do is cut and paste ...Warning: Unknown property 'box-shadow'. Declaration dropped.
Source File: http://wwwimages.adobe.com/www.adobe.com/ubi/template/identity/adobe/screen/gnav.css
Line: 316
Warning: Error in parsing value for 'filter'. Declaration dropped.
Source File: http://wwwimages.adobe.com/www.adobe.com/ubi/template/identity/adobe/screen/gnav.css
Line: 319
Warning: Expected media feature name but found '-webkit-min-device-pixel-ratio'.
Source File: http://wwwimages.adobe.com/www.adobe.com/ubi/template/identity/adobe/screen/gnav.css
Line: 404
Warning: Expected declaration but found '*'. Skipped to next declaration.
Source File: http://wwwimages.adobe.com/www.adobe.com/ubi/template/identity/adobe/screen/gfooter.css
Line: 13
theres more but that will do. i have put websites into safe for anti virus and firewall. have done everything re cleaning cache etc etc.

The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe PDF Plug-In For Firefox and Netscape "9.4.2"
**New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
**'''''Security update for versions 9 and 10 were released 2011-02-08'''''
*Shockwave Flash 10.0 r32
**'''''Security update version 10.2.152.26 released 2011-02-08
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

Recommendations for flash plug-ins?

Greetings ~
I wonder if anyone has a preferred flash plug-in for Compressor. I've looked into On2Flix and SorensonVideo3. Frankly, I find it all a bit overwhelming. My goal is to find the most cost effective/time efficient method for exporting to flash.
I'd appreciate hearing any of your experiences and recommendations.
Thanks ~ L

Click here and install the software.
(125738)

Is Mac OS X Lion suitable for macbook pro or only desktops?

Just wondering if OS X Lion is suitable for Macbook Pro's or if it is too big? Also, I can see on the forum that a few people have had issues since upgrading, is it worth it? Or will it just cause glitches and problems? I would love some opinions on this before I upgrade.

spectra9 wrote:
Just wondering if OS X Lion is suitable for Macbook Pro's or if it is too big?
Works flawlessly on mine. Lion is suitable for any mac that meets Lion technical specifications, although running it on a mac that meets the minimum specs may result in less than desired performance.
Also, I can see on the forum that a few people have had issues since upgrading, is it worth it? Or will it just cause glitches and problems?
It is worth it only if you need/want the features that Lion provides: http://www.apple.com/macosx/whats-new/features.html. Also, you will generally only read about problems that people are having with Lion, as users who aren't having any problems (like me) have no reason to create posts on how happy they are with it. The users who are having problems with it are minimal.

Mac 10.4 Base SDK for CS3 plug-ins only?

Similar Messages

Maybe you are looking for