Mac 10.5.8 should be install which version for itunes? and how to get it?

i am using mac os x 10.5.8, can not open itunes in my mac(it says"it was install by a higher version"), so that i need to re-install a lower version. But there was only itunes 10.7 on apple.com for free download, how can i get the lower version for itunes that i could install to fit my os? thx!

Dear John Galt,
(That is an awesome character from Atlas Shrugged)
I am using an iBook G-4, and the software operating system is OS X 10.5.8
I have installed the iTunes 10.6.3, but it refuses to open and gives a notification that
" iTunes requires QuickTime 7.5.5 or later. For more information on upgrading your computer, visit http://www.apple.com/quicktime "
On visiting that page for QuickTime, I could not find any information to get this version for upgrading my existing QuickTime player, which is a QuickTime version 7.3.0
Please guide me how to overcome this situation.
Just to give you a brief idea as to why this situation has started:
My kids used this machine, and naturally used it in a way they should not have - specialy not on a bed.
The inner socket for charging my iBook had broken, and so could not recharge the battery again. Therefore my machine was shut for over 8 months as the cost to repair it was prohibitive. Later I attempted to repair it on my own, and succeeded, However, even the internal battery backup was dead due to such a long time of inactivity without a re-chargem and this led to my hard disk to malfunction.
So, I had to re-install the Leopard disk, and tried to salvage as much of the old documents, photographs, and music as I could. I lost every single photograph on the hard disk, but managed to save documents and some music.
I'm still using the same hard disk, and it has been working without a problem since I re-installed the leopard. But, I lost a few programmes - iTunes, Keynote and maybe a few others.
I downloaded the iTunes 10.6.3, but as I have explained above, I've been unable to start it yet.
My apologies for such a long message, but I felt I wouldn't do justice without giving you an explanation as to why this happened.
I would really appreciate your input, to resolve this situation.
Thank you very much.

Similar Messages

I installed new version of itunes and I'm getting error message 0xe8000084&oxe800002dwhen trying to sync iphone5 what can I do?

I just installed new version of iTunes when I go to sync iPhone 5 keep getting error oxe8000084&oxe800002d is there a solution to this?

Try this for Windows 7 (64 bit),
Close iTunes - Go to Task Manager – Click the “Services” tab - select “Apple Mobile Device” - left click and choose “Stop Service” - wait a few seconds - left click and choose “Start Service” - wait a few seconds - open iTunes - connect your iDevice.
Did it work?

Tried to install newest version of iTunes and I'm getting runtime error R6034

Trying to install the new version of iTunes I am getting the following message from Microsoft Visual C++ Runtime library:
Runtime error!
Program: C:\Program Files\iTunes\itunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application support team for more information.
and the installation fails with Error 7 (Windows error 114).
I already tried uninstalling iTunes, Apple Software Update, Apple Mobile Device Support and Bonjour. Rebooted and tried to installed iTunes from zero, but I keep getting the same error.
I will appreciate any help with this issue.
Thanks in advance!

Hi htlara,
Thanks for visiting Apple Support Communities.
If you see the error "iTunes was not installed properly. Please re-install iTunes. (Error 7)" the troubleshooting steps in this article can help:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
All the best,
Jeremy

Attempted to install new version of itunes and now getting errors occurred while install updates. runtime error program: c:\program files (x86) an application has made an attempt to load the c runtime library incorrectly. please contact the applications

attempted to install newest version of itunes and now get 'runtime error' program: c:\program files (x86) r6034

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

How do I install latest version of iTunes when I keep getting an error message to go to Tools, Download only, then Install manually??

How do i install latest version of iTunes when I keep getting an error message to go to Tools, Download only, and install manually??

Hi Moerdesign,
Did you downloaded and installed Photoshop and Illustrator CS6 through Creative Cloud.
After uninstalled them, Creative Cloud saying applications are "Up to Date" when not installed.
If this is the case then please perform the steps given in the help document.
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
Please let me know if this is not the case.
Screenshot of the problem would be great help.
Regards,
Sumit Singh

I attempted to install the new version of itunes and I keep getting a R6034 error

I attempted to install the new version of Itunes and I keep getting a R6034 error. What do I do?

Hi davemac123,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

I could not install the upgrade for iTunes and Error message said "can't start because MSVCR80.dll is missing" Reinstallling has not helped. Is it Apple's fault?

I could not install the upgrade for iTunes and Error Message said " Can't start because MSVCR80.dll is missing". Reinstalling has NOT helped. . Is the fault with the Apple iTunes upgrade?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.

Can i sync my mac pro with my mac book? i mainly want to do this for iTunes and iPhoto? I also have an iPhone and an iPad.

can i sync my mac pro with my mac book? i mainly want to do this for iTunes and iPhoto? I also have an iPad and an iPhone.

Do you have a local network setup either wired or wireless? If so, then have both computers connected to the network. Enable File Sharing on both computers in Sharing preferences. Select the startup drive on each computer. Press COMMAND-I to open the Get Info window and check the box labeled, Shared Folder.
You can now keep both computers in sync by using a third-party backup/sync utility that will work with a network setup such as:
Data Backup
Deja Vu
Silver Keeper
Retrospect
Super Flexible File Synchronizer
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

Installed newest version of Itunes and get an error message when trying to launch

downloaded and installed newest version of itunes twice, when i go to launch it says the following error messge "the ordinal 2551 could not be located in the dynamic link library CoreMedia.dll"

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Which version to download and how to install for IE8/FF6.0

Hello,
I just installed the latest update to my Firefox browser. When it finished it informed me I need to update my Flash Player. When I started to do so, I saw that there are separate versions for Internet Explorer and Mozilla Firefox. I use both of these browsers. My current versions are as follows:
Internet Explorer: Version 8
Firefox: Version 6.0.1
My operating system is Windows XP Home 32bit with SP3
I downloaded both the IE and FF files and saved them on my hard disk:
install_flashplayer10ax_aih.exe
install_flashplayer10_chrd_aih.exe
These two files are NOT identical - and one is about 256 bytes larger than the other, though the version number - 10.3.183.7 - is the same for both files.
I ran the aimation at URL http://www.adobe.com/software/flash/about/ in both browsers; both report the current Flash Player version is WIN 10.3.181.26.
What is the best way to install the relevant update to the proper browser?
Thank you.

You will need two different installers, one (ActiveX) for Internet Explorer, and one (plugin) for Firefox.
Download them from the links in http://forums.adobe.com/thread/889580

Can't install newer versions of iTunes and can't un-install current version

HELP!
That's a good start to my first post I think lol... hey at least I'm still laughing, even though I feel like crying!
I am having (probably similar to many from what I can see from this forum and also from google search) problems updating my iTunes to the latets version.
Whenever I start to install the new version I get a message pop up saying that iTunes64.msi can't be located, even though it does exist in the default filepath it throws up anyway.
After doing some Google searches I saw that a way around this might be to use the Windows Unintaller Utility, however, I have yet to actually find this utility, particularly as Microsoft now appear to have removed all traces of it from their site as it seemd to be causing other issues.
Next I found an article on Apple that said that if I am having the problems that I have stated above then I should unistall various apple software items in a particular order with iTunes being the first on the list.
This is where I am now stuck! I can't un-install iTunes from Control Panel as it says that it isn't installed! Of course it is installed, however, it would appear that something somewhere is corrupt and it doesn't actually think it is really installed (I think my PC is suffering a sual personality... maybe that's what dual core really means lol).
The corrupt nature of my iTunes installation would also seem to be borne out by the fact that the icon in the list of installed programs for iTunes is not the normal icon but a blank (unrecognised) icon.
I am now clean out of ideas as I can't do any of the "normal" things to remove and re-install iTunes and so I could really use some help/advice.

Hi Katrina
Thanks for confirming my suspicions on the use of (or rather not) of the utility on Windows 7.
I also tried as you suggested to run the iTune64.msi file from it's location... it almost looked like it was working but then came up with the usual message saying it couldn't find the .msi file.
I even tried copying the file to another location but it still hit the usual error
I have a horrible suspicion that I am not going to get this sorted short of doing a complete re-install of my OS (which I don't fancy doing, particularly as at least iTunes is functioning anyway).
I am already planning to move away from Windows PCs and move onto a Mac in the very near future, so hopefully in the intervening time Apple won't release a critical udate to iTunes that means I need to update to continue certain functionality.
Roll on Mac-Day for methinks
Of course if anyone else can think of any solutions for me to try in the meantime then I would be more than grateful to hear from them and to give it a whirl.

Dreamweaver and BC which version is best and how do I start a fresh clean slate?

To all Adobe Gurus who are willing to help,
I have had Creative Cloud for over a year and I have nothing to show for it. Mainly because I am overwhelmed with what to do. I went to school for design some time ago. I used Dreamweaver when it was still owned by Macromedia. I have had a hard time integrating back after so many years and this is all new to me. I have watched countless of tutorial videos both on here and lynda.com. I am lost. I can not find the answers I need?
I need to get help on building an e-commerce site. I used Muse first for design, then I was told that DW works best.
Which one? Seems I only can get something going on DWCS6 or DWCC, but not DWCC14'
However, when I did start a site with DW CC, I was prompted to import an entire site with the GET STARTED video that you use as beginners for BC, but I accidentally hit cancel.
Now, the site manager can see the name of the site. But I want to start a fresh new slate? Is it as easy as just deleting the local root folders? Do I need to uninstall and reinstall?
Nothing has gone remotely except for a template that is sitting still on the admin side of Business Catalyst.
I do like DW CC 14' newest features with the PSD comp and such. WOAH. But can I design a website and still integrate BC into it or how does it all work?
Can I start all over? Delete what I started and start fresh?
**Running MAC OS X latest version. I just want to know if I can start all over? Or which version of Dreamweaver should I use in order to get the best results?
Thank you kindly for reading and lending a hand. I sincerely would appreciate any leads or answers to these questions.
Artizahn

The template for ePub is for Pages 09 as are the instructions on that particular web page.
Have you tried looking in the Help for Pages 5? Here is the link to that particular subject when searching for ePub.
http://help.apple.com/pages/mac/5.0/?lang=en#/tanc2e488747
You have the option to get to the online help in Pages 5 Help menu.
If you have Pages 09 I suggest you use that app for your ePubs.

I am getting "Error in accessing iTunes store. Please try again later." Error 0x80092013. I have just downloaded and installed current version of iTunes, and have the 2013 Norton IS. My proxy server is letting me got to iTunes, but cannot login.

I have a proxy server and the server is allowing me to go to iTunes. But I get a message "Error in accessing iTunes store. Please try again later." Error code ox80092013. I cannot find that code in the troubleshooting section. I have just installed a new PC HP5750, with Norton IS 2013. I installed the current version of iTunes directly from the iTunes site. My proxy server is American Family Online web browsing filter. I contacted them and they said there should not be a problem with their server. I have had an account previously, but has been inactive for several months. I even tried to create a new account, but still got the same error code.
Someone please help with this. I have accompaniment tracks on iTunes that I need for music ministry.

Hi Lcoffin8,
Thanks for visiting Apple Support Communities.
See this article for additional information and steps that can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy

Installed new version of iTunes and now my library is gone.

I installed the latest version of iTunes when I got a prompt on opening iTunes. When the installation was complete, all of my music was gone. I found my library and thought I imported it to my library correctly, but every time I quit iTunes, the next time I open it, I get a library window with only a few songs in it. I have to reimport my itunes music folder. This has happened several times. I'd like iTunes to open with my entire music folder laready in it. Please help.

This may help.
http://docs.info.apple.com/article.html?artnum=301895

Installed new version of itunes and now my toshiba external hard drive won't mount

All of my music and photos reside on this Toshiba hard drive. I successfully had itunes find the hard drive for the library. After I installed updated itunes to mac, the toshiba doesn't mount to any of my computers. (I've tried it on more than one) The light on the drive comes on, but I never see it on my desktop. Thank you for your help.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on anoterh computer to help determine if you have an iPod or computer problem.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Mac 10.5.8 should be install which version for itunes? and how to get it?

Similar Messages

Maybe you are looking for