Mac 10.5.8 to hp b209a connection.
I want to ask question to any HP PERSONNEL..
I been trying for a long time connecting this printer to the mac,,now am thinking to junct it off. It say when i try to connect to the printer,, Problem communicating with the printer although the USB is already connected, and when I print test page it will be printed letters like this..
N2 UDS Path: E2BEE6D7- 7FC8 - 439F - BD22 - EBC
and this will take several minutes to be printed the few letters. When re test printing again it will like that again but different letters or numbers already. Why this printer print that thing though it will appear PROBLEM COMMUNICATING WITH THE PRINTER.
thank you very much..
OK, let's start all over:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall <<<< Scrubber Option
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Now, run a Software Update.
Reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
Finally, download and install the "Full Featured" Driver and Software from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
My Mac Book Pro suddenly will no longer connect to the Internet at my house. Help?
My Mac Book Pro suddenly will no longer connect to the Internet at my house. My son's MacBook connects just fine. My MacPro connects at work, at Starbucks, etc. just fine, but not at my house. My son's however has no problem whatsoever. I assume that since his computer connects that the router and modem is not the problem. And since my computer connects everywhere but here . . . . it is not a hardware issue. When directly connecting my MacBook Pro to the modem or router the problem was the same. . . no connection. Help?
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected. -
My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?
I was able to connect the first time, but after that my computer simply rejects the Iphone and nothing happens. The Iphone doesn't spin or try to reboot even! .
WHAT to do? I got it today.When you say it ignores your iPhone, do you mean it does not appear in iTunes if you launch iTunes? Or it does not appear in Finder? Or does not appear in iPhoto? Or you get an error message?
-
Using a Mac, OSX 10.6.8; My internet connection is working properly, I can reach all sites via browser, yet I get the following message in iTunes: "iTunes could not connect to the iTunes store. An unkown error occurred (-54)."
I have the same issue with almost exactly the same environment...
iPhone4S (32GB) running iOS5.0
Windows 7 Enterprise
iTunes 10.5.2.11
iPhone has been set up to wirelessly sync when on charge yet I get this error when the iPhone is not even charging!
I work for a mobile network operator and although this isn't something we support anyway, we would usually stumble across something like this when customers call us for advice prior to contacting the manufacturer for support, yet this hasn't been a call driver so I'd imagine this is isolated... (either that or not many people have updated their device and set up the wireless sync lol)...
Hey Apple! Any ideas? :-) -
hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions. -
I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't! I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected. HELP!
Ask the Verizon store to exchange your iPhone for a different iPhone 4.
UPDATE - Sure, try ckuan's solution first. Then use mine if that fails.
Message was edited by: sberman -
Wireless MAC filter can not be active to connect to WIFI?
I use a Linksys router with WEP security and a Wireless MAC filter. When I turned off WEP I was unable to connect to the router with my iphone 3g but when I enabled WEP and turned off the MAC filter I connected right away.
Has anybody else seen this or has anyone successfully connected to a router with a MAC filter?
ThanksI have no problems connecting to a router with MAC filtering enabled... I would just double check that you entered the correct MAC address into your router (Settings>General>About>Wi-Fi Address) and make sure the permissions are set correctly for that MAC address (if applicable)...
-
I am trying to get the music content in iTunes on my Mac onto my iPhone. When I connect the devices, the computer does not seen to recognize the iPhone. i.e., on the open iTunes window, the iPhone is not seen as a connected "device".
Hi,
See Here
iPhone, iPad, or iPod touch not appearing in iTunes
From Here
http://www.apple.com/support/itunes/devices/
Also...
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538 -
I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?
Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
When my mac is inactive, i lose my broadband connection and have to log in again
I have just had a new hardward installed on my mac pro, and now I find if my mac is inactive, I lose my broadband connection.
Courcoul wrote:
Regardless. This is an OS issue, no matter whether the host is movable or not.
Which means it's not even a Macbook what ever issue. Post should be in whatever os the op is using! Right? -
Using the mac mini with a dial up internet connection
How do I go about using my mac mini with a dial up internet connection? I am soon to be moving to a rural area and dial up will be my only internet option. Please be very specific in your answer as I am not a very tech savvy fellow. Thank you for your help.
The last time I needed to use dial up I used this amazing device from actiontec:
http://shopping.netsuite.com/s.nl/c.ACCT122499/it.A/id.72/.f
Very hard to find one now, but it has the advantage that it connects to the ethernet ports of up to two computers, rather than using a less reliable usb connection. -
Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks
There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/
-
I just got a Mac and I use the same internet connection as my mom and my brother, who has an iPad. He can click on something that has my name and then Macbook Air, and is able to see everything on my computer screen. How do I fix this so he cant see what i am doing on my computer?
No, I made sure nothing was checked for that section when i found out he could see my screen. At the top it says "computers on your local network can access your computer at: blah blah". I think thats how hes doing it but i dont know how to fix it.
-
My mac air OSX10.8.5 won't connect to the internet. It says it has a 'self assigned IP address and therefore cannot connect to the internet'. Network diagnostics is unable to the solve the problem. It happened suddenly for no reason and now I cannot connect except by typing in the configuration settings manually. Please help me!
Use the Airport Utility or log into your wireless device via http and ensure the DHCP/NAT service is enabled. If accessing via HTTP, you will need to manually set an ip within your local subnet (eg: 192.168.0.x).
-
How to start RSH on MAC mountain lion? I'm getting connection refused error
How to start rshd on mountaion lion??
>mac-29#rsh CMD 'rsh' '10.73.105.131' '-l' 'root' '/bin/mkdir /mnt; echo END'_'COMMAND'_'OUTPUT'
<<mac-29#rsh|10.73.105.131: Connection refused\r\nWow, no answer yet? It's been 6 months.
Maybe you are looking for
-
I was using my ipod not only for iTunes purchases, but also Amazon music. The current Amazon music app isn't compatible and it doesn't offer the old one. Not only that, but all my old apps are gone too. :-( before I go through along process, wil
-
UCCX - abandoned calls marked as handled contactinactiveexception
Hi I have a UCCX 8.5 script - at the start of the script it uses the IF contactinactiveexception exception occurs go to - which then goes to a label which clears the exception and then marks the call as handled What I have noticed is that this step i
-
Playing music after switching Touch on
Hi! Is it a feature or a bug? - iTouch doesn`t resume playing song from previous place after switching it on. It`s working good on Nano or Classic. Thanx
-
Outlook some messages are not supporting
Am getting error message for some mails in outlook. "This type of message is not supported by your current version of windows phone ". I have updated latest sw only. (current sw version is Lumia amber). As I need to check mails while travelling, but
-
Can I trash "Previous Systems" after Archive and Install?
For details leading up to this question, please see my previous post entitled "Not recognizing password after OS install". Basically I want to know if I can throw out the "Previous Systems" folder that was created when I did an "Archive and Install"