Mac 10.6.3 won't restart after software update
I just installed Snow Leopard on my mac and that was successful. I went to do a software update afterwards (hoping to move up to 10.6.8) and it went through, but when the computer had to restart, it would just shut down, and reboot to the purple-ey space-ey background image....and just stay there.. The computer will shut down fine by holding the power button, and it will start up fine. It's just after the software update, that it will not restart fully. Any ideas?
I don't want to hijack the thread with my problem
But you are. You can avoid that by starting your own posting. The original poster has never responded, since Feb 18th, to anyone, so it is unlikely that he would respond to you.
If a friend gave you the iMac with Lion on it, he most likely didn't give you his Apple ID and password either, because that is what you would need to do future updates. Your copy of Lion is most likely licensed to the previous owner, not you. He should have given you the Mac with it's original disks and the original OS X version installed.
When you post your own issue, you can reward those that help you by awarding points. That won't work when you hijack someone else's thread, because only the original poster can award points. Thus you're removing an incentive for anyone wanting to answer your replies. Not to mention that it waters down the intent go the original issue as more and more variables are added to the thread.
Similar Messages
-
IBook G$ won't restart after software update
Hi there Gurus (and thanks for all you do)
A friend came to visit yesterday, from her remote village where she has no access to high-speed internet.
Naturally she took the opportunity to run Software Update on her iBook while she was here. Sadly since the update the iBook won't successfully restart. It stays at the grey screen with the gear turning infinitely.
I haveed tried to start in verbose mode, and it then gets stuck repeatedly trying to run "/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started" - over and over again.
She has returned home and will send me her install disks, but I wondered if there is anything anyone can suggest that might help.
Thanks,
NikkiHello Nikki and Welcome to Apple Discussions ...
Try Safe Mode: http://support.apple.com/kb/HT1455?viewlocale=en_US
No luck there, run Disk Utility from the Applications/Utilities folder. Launch DU, select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab then click Verify. If DU reports, then you're going to need her restore disks. The DU app on her drive can check for errors, but it can't repair them, ergot the restore disks. It might say Volume Needs Repair...
If you can use another Mac that is compatible, you could use Target Disk Mode to access her files.
Transferring files between two computers using FireWire.
To transfer files using FireWire:
1. Shut down the first computer and leave the second computer on.
2. Connect the two computers using a 6-pin to 6-pin FireWire cable. (If both computers have higher-speed FireWire 800 ports in addition to the standard FireWire 400 ports, you can use a 9-pin to 9-pin cable with the FireWire 800 ports to transfer data at higher speeds.)
3. Open System Preferences, click the Startup Disk, and click Target Disk Mode. (Or, start up the first computer while holding down the T key.)
4. A disk icon for the first computer appears on the desktop on the second computer. Drag files to and from the disk to transfer them.
5. When you finish, eject the first computer's disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
6. Push the power button on the first computer to shut it down and disconnect the FireWire cable.
And more info on Target Disk Mode here: http://support.apple.com/kb/HT1661
Carolyn -
MBP won't restart after software update
This is regarding my MacBook Pro 17" late 2009 edition running OSX 10.7.2
Yesterday while running a routine Software Update which included latest iTunes and OSX system updates, my MBP was stalled during one of the last steps of installation process (something titled like copying files to right locations..). I waited for hours and ultimately hit the power button to restart. Since then my MBP only restarts to the stage of apple logo appearing on grey followed by the spinning cartwheel which seems to go on forever. No blue/ login screen appears even after I waited for over an hour. Seems like the update process was not successful and in turn broke the system startup.
I then fixed the disk permissions and repaired the hdd using disk utility from my original install disk but still no luck.
I even tried to reinstall macosx but it presents the hdd as unavailable. Could it be because I only have about 70gb free on this 500gig hdd?
What is the best course for me to get my MBP up and running again, please help!Try command-R at startup to get into Lion Recovery. You have several options from repair to reinstall. Read these links when you get it running again.
http://support.apple.com/kb/HT4718
http://www.apple.com/macosx/recovery/ -
Nokia 3250 won't restart after software update
I did what the Installation and upgrading instructions told me to do, but after finishing the update (everything went fine), my phone stops with the Nokia starting-up screen and then appears the so called White Screen of Death.
I want to fix this ASAP, what is the next step?
How long will take the fix if I have to leave my phone on the Nokia Service Care? Is it a matter of a few minutes or it will take a couple of days?
My warranty is valid (one month old).
Best wishes,
Jon
Mexico City
EDIT: Removed email addressMessage Edited by ajak on 15-Jan-2007
03:11 PMHello Nikki and Welcome to Apple Discussions ...
Try Safe Mode: http://support.apple.com/kb/HT1455?viewlocale=en_US
No luck there, run Disk Utility from the Applications/Utilities folder. Launch DU, select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab then click Verify. If DU reports, then you're going to need her restore disks. The DU app on her drive can check for errors, but it can't repair them, ergot the restore disks. It might say Volume Needs Repair...
If you can use another Mac that is compatible, you could use Target Disk Mode to access her files.
Transferring files between two computers using FireWire.
To transfer files using FireWire:
1. Shut down the first computer and leave the second computer on.
2. Connect the two computers using a 6-pin to 6-pin FireWire cable. (If both computers have higher-speed FireWire 800 ports in addition to the standard FireWire 400 ports, you can use a 9-pin to 9-pin cable with the FireWire 800 ports to transfer data at higher speeds.)
3. Open System Preferences, click the Startup Disk, and click Target Disk Mode. (Or, start up the first computer while holding down the T key.)
4. A disk icon for the first computer appears on the desktop on the second computer. Drag files to and from the disk to transfer them.
5. When you finish, eject the first computer's disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
6. Push the power button on the first computer to shut it down and disconnect the FireWire cable.
And more info on Target Disk Mode here: http://support.apple.com/kb/HT1661
Carolyn -
Problem restarting after software update
Computer is fine, drive 40% full, no speed problems...
But it just won't restart after software update runs, nor will it restart or shut down from finder.
Problem solving so far: Safe boot, reset pram, ran disk utility, ran disk repair using install disk, ran fsck -y, ran disk warrior.
Is annoying. ANy ideas anyone? If not, what is the procedure for updating using sudate and terminal, as when I use software update, a force shut down will not install.
ANy ideas folks?Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
Unable to restart after software update 10.3.1.1779
I am unable to get my Z10 to restart after this update.
I have searched endless avenues and have now resorted to deleteing the notifcations for this update when they come in, I have downloaded and installed it, but when asked to restart, my phone stalls on the loading screen forever, the longest I have waited for it to restart is 3 days, with 24 hours of that on 99%.
I am now the but of all phone related jokes as everyone I know has an IPHONE that works perfectly, but I insist on keeping this awful Z10 becuse I dont want to join their rank....too tink I spent £500 on this when it came out (more fool me)
It would seem that the general consensus is, I will have to go to the inconveience of taking my Z10 in to a phone shop, were they will send it off to BB for the update to be installed.
PS; Blacberry's forum is as hard to navigate as the phone is to actually get working proberly.This has been the worst software update I have ever encountered. My Q10 is completely unreliable and I am going to switch to another device in the morning. I have restored factory settings and have successfully wiped the app to sync my shared Google Calendars, the z and y keys have swapped on my keypad and the Q10 still turns itself off arbitrarily, wipes all text and phone messages and can't recall what network I'm on or what my home wifi settings are.
-
Mac won't restart during software update
I'm trying to install the 10.7.1 update. My Mac won't restart when I okay the restart -- it just goes to the log-in page. Suggestions? It's bad enough I lost info on on of my Lacie drives due to Lion. So now I can't update.
Thanks very much for any help you can provide.
OceanYikes -- "hosed"? One of my LaCie drives won't mount. I went to the Apple store last night and the "experts" said that a firmware update will be released at some point, but not everyone is having problems. I wonder if I should reinstall Lion to see if that would help reset everything.....
But then, that's for another thread (which I started but no one could supply an answer).
Thanks for your replies, baltwo. -
Mac Mini Early 2009 Won't Boot After Mavericks Update
I had Mavericks installed on my Mac for a while now and recently, it did a software update... Since then, I rebooted the system when it asked me to and it has not been able to boot up since then. It reaches the Apple Screen, tries to load the OS and my Mac shuts off Completely...
I recently upgraded the Hard Drive on the system, so I am currently using my old hard drive running OS X 10.5.8... I plugged in my Hard Drive that has OS X Mavericks on it and I tried to verify the disk. When I do so in Disk Utility, I get this message:
I went on a couple of websites where people had this same issue, and I followed the instructions where someone said to open Disk Utility, select the Partition and Press "CMD + i". I got the name of my drive from Disk Identifier. I opened Terminal and typed in "sudo /sbin/fsck_hfs -yprf /dev/disk1s2"
It ran the code and this is the output...
Last login: Sat Mar 15 10:05:40 on console
fadil-shamir-khans-mac-mini:~ silentarts$ sudo /sbin/fsck_hfs -yprd /dev/disk1s2
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
/dev/rdisk1s2: starting
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Journal replay returned error = 22
** Checking Journaled HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
** Rebuilding Catalog B-tree.
hfs_UNswap_BTNode: invalid node height (1)
hfs_swap_BTNode: record #57 invalid offset (0x0003)
Invalid node structure
(4, 6913)
hfs_swap_BTNode: record #-1 invalid offset (0x004D)
Invalid node structure
(4, 6915)
hfs_swap_BTNode: invalid forward link (0x0065006E)
hfs_swap_BTNode: invalid backward link (0x0075002E)
hfs_swap_BTNode: invalid node height (110)
hfs_swap_BTNode: offsets 103 and 104 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6916)
hfs_swap_BTNode: record #-1 invalid offset (0x0075)
Invalid node structure
(4, 6917)
hfs_swap_BTNode: invalid forward link (0x002E006E)
hfs_swap_BTNode: invalid backward link (0x00690062)
hfs_swap_BTNode: offsets 132 and 133 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6918)
hfs_swap_BTNode: record #-1 invalid offset (0x0065)
Invalid node structure
(4, 6921)
hfs_swap_BTNode: invalid forward link (0x006D0065)
hfs_swap_BTNode: invalid backward link (0x006E0074)
hfs_swap_BTNode: invalid node height (80)
hfs_swap_BTNode: record #113 invalid offset (0x0075)
Invalid node structure
(4, 6922)
hfs_swap_BTNode: record #-1 invalid offset (0xA26E)
Invalid node structure
(4, 6923)
hfs_swap_BTNode: invalid forward link (0xCE4D961D)
hfs_swap_BTNode: record #-1 invalid offset (0x0065)
Invalid node structure
(4, 6924)
hfs_swap_BTNode: invalid forward link (0x006E0067)
hfs_swap_BTNode: invalid backward link (0x0065004C)
hfs_swap_BTNode: invalid node height (105)
hfs_swap_BTNode: offsets 113 and 114 out of order (0x0078, 0x0032)
Invalid node structure
(4, 6925)
hfs_swap_BTNode: invalid forward link (0x00650073)
hfs_swap_BTNode: invalid backward link (0x00730061)
hfs_swap_BTNode: invalid node height (103)
hfs_swap_BTNode: offsets 99 and 100 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6926)
hfs_swap_BTNode: invalid forward link (0x0078002E)
hfs_swap_BTNode: invalid backward link (0x0070006E)
hfs_swap_BTNode: invalid node height (103)
hfs_swap_BTNode: offsets 4 and 5 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6932)
hfs_swap_BTNode: invalid forward link (0x0047004B)
hfs_swap_BTNode: invalid backward link (0x00500061)
hfs_swap_BTNode: invalid node height (110)
hfs_swap_BTNode: record #99 invalid offset (0x5277)
Invalid node structure
(4, 6937)
hfs_swap_BTNode: invalid forward link (0x00460072)
hfs_swap_BTNode: invalid backward link (0x0061006D)
hfs_swap_BTNode: invalid node height (101)
hfs_swap_BTNode: offsets 80 and 81 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6938)
hfs_swap_BTNode: invalid backward link (0x07110000)
hfs_swap_BTNode: invalid forward link (0x00610074)
hfs_swap_BTNode: invalid backward link (0x00650032)
hfs_swap_BTNode: invalid node height (64)
hfs_swap_BTNode: record #49 invalid offset (0x525E)
Invalid node structure
(4, 6940)
hfs_swap_BTNode: record #-1 invalid offset (0x006F)
Invalid node structure
(4, 6941)
hfs_swap_BTNode: invalid forward link (0x00770040)
hfs_swap_BTNode: invalid backward link (0x00320078)
hfs_swap_BTNode: invalid node height (46)
hfs_swap_BTNode: record #111 invalid offset (0x006D)
Invalid node structure
(4, 6942)
hfs_swap_BTNode: invalid backward link (0x0056000F)
hfs_swap_BTNode: invalid node kind (62)
hfs_swap_BTNode: invalid node height (233)
hfs_swap_BTNode: record #39 invalid offset (0x0067)
Invalid node structure
(4, 6944)
hfs_swap_BTNode: invalid forward link (0x00650064)
hfs_swap_BTNode: invalid backward link (0x00400032)
hfs_swap_BTNode: invalid node height (120)
hfs_swap_BTNode: record #45 invalid offset (0xCE4D)
Invalid node structure
(4, 6945)
hfs_swap_BTNode: record #-1 invalid offset (0x0047)
Invalid node structure
(4, 6946)
hfs_swap_BTNode: invalid forward link (0x004B0054)
hfs_swap_BTNode: invalid backward link (0x00610062)
hfs_swap_BTNode: invalid node height (98)
hfs_swap_BTNode: record #96 invalid offset (0x0065)
Invalid node structure
(4, 6947)
hfs_swap_BTNode: invalid forward link (0x00720061)
hfs_swap_BTNode: invalid backward link (0x006D0065)
hfs_swap_BTNode: invalid node height (83)
hfs_swap_BTNode: offsets 102 and 103 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6948)
hfs_swap_BTNode: record #-1 invalid offset (0x0065)
Invalid node structure
(4, 6951)
hfs_swap_BTNode: invalid forward link (0x006C0063)
hfs_swap_BTNode: invalid backward link (0x006F006D)
hfs_swap_BTNode: invalid node height (101)
hfs_swap_BTNode: offsets 69 and 70 out of order (0x0040, 0x0032)
Invalid node structure
(4, 6952)
hfs_swap_BTNode: invalid forward link (0x0073006B)
hfs_swap_BTNode: invalid backward link (0x00370030)
hfs_swap_BTNode: invalid node height (64)
hfs_swap_BTNode: offsets 48 and 49 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6953)
hfs_swap_BTNode: invalid forward link (0x000A0184)
hfs_swap_BTNode: invalid backward link (0x7A7D0000)
hfs_swap_BTNode: invalid node height (10)
hfs_swap_BTNode: record #-1 invalid offset (0x000D)
Invalid node structure
(4, 6957)
hfs_swap_BTNode: invalid forward link (0x0043006F)
hfs_swap_BTNode: invalid backward link (0x00640065)
hfs_swap_BTNode: invalid node height (82)
hfs_swap_BTNode: offsets 99 and 100 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6958)
hfs_swap_BTNode: invalid forward link (0x004C0065)
hfs_swap_BTNode: invalid backward link (0x00610064)
hfs_swap_BTNode: invalid node height (101)
hfs_swap_BTNode: offsets 112 and 113 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6959)
hfs_swap_BTNode: invalid forward link (0x002E0073)
hfs_swap_BTNode: invalid backward link (0x00740072)
hfs_swap_BTNode: invalid node height (105)
hfs_swap_BTNode: record #106 invalid offset (0x0065)
Invalid node structure
(4, 6962)
hfs_swap_BTNode: invalid forward link (0x006C006C)
hfs_swap_BTNode: invalid backward link (0x00650072)
hfs_swap_BTNode: invalid node height (46)
hfs_swap_BTNode: record #114 invalid offset (0xA273)
Invalid node structure
(4, 6963)
hfs_swap_BTNode: invalid forward link (0x001C0047)
hfs_swap_BTNode: invalid backward link (0x004B004E)
hfs_swap_BTNode: invalid node height (111)
hfs_swap_BTNode: record #115 invalid offset (0x5277)
Invalid node structure
(4, 6964)
hfs_swap_BTNode: invalid forward link (0x00700061)
hfs_swap_BTNode: invalid backward link (0x00720065)
hfs_swap_BTNode: invalid node height (86)
hfs_swap_BTNode: offsets 103 and 104 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6965)
hfs_swap_BTNode: invalid forward link (0x00740072)
hfs_swap_BTNode: invalid backward link (0x0069006E)
hfs_swap_BTNode: invalid node height (103)
hfs_swap_BTNode: record #112 invalid offset (0x0067)
Invalid node structure
(4, 6966)
hfs_swap_BTNode: invalid backward link (0xF1F30000)
hfs_swap_BTNode: record #-1 invalid offset (0x0069)
Invalid node structure
(4, 6968)
hfs_swap_BTNode: invalid forward link (0x006E0067)
hfs_swap_BTNode: invalid backward link (0x00730002)
hfs_swap_BTNode: invalid node height (134)
hfs_swap_BTNode: invalid node height (11)
hfs_swap_BTNode: invalid record count (0x5431)
Invalid record count
(4, 6971)
hfs_swap_BTNode: record #-1 invalid offset (0x0073)
Invalid node structure
(4, 6975)
hfs_swap_BTNode: invalid forward link (0x00020086)
hfs_swap_BTNode: invalid node height (11)
hfs_swap_BTNode: invalid record count (0x548C)
Invalid record count
(4, 6976)
hfs_swap_BTNode: invalid forward link (0x00610072)
hfs_swap_BTNode: invalid backward link (0x00640044)
hfs_swap_BTNode: invalid node height (101)
hfs_swap_BTNode: offsets 114 and 115 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6977)
hfs_swap_BTNode: invalid forward link (0x0072006F)
hfs_swap_BTNode: invalid backward link (0x006C006C)
hfs_swap_BTNode: invalid node height (101)
hfs_swap_BTNode: offsets 112 and 113 out of order (0x0072, 0x0046)
Invalid node structure
(4, 6981)
hfs_swap_BTNode: invalid forward link (0x006C006C)
hfs_swap_BTNode: invalid backward link (0x00650072)
hfs_swap_BTNode: invalid node height (46)
hfs_swap_BTNode: offsets 113 and 114 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6982)
hfs_swap_BTNode: invalid forward link (0x00690066)
hfs_swap_BTNode: invalid backward link (0x00690063)
hfs_swap_BTNode: invalid node height (97)
hfs_swap_BTNode: record #115 invalid offset (0x5277)
Invalid node structure
(4, 6983)
hfs_swap_BTNode: invalid forward link (0x00700061)
hfs_swap_BTNode: invalid backward link (0x00720065)
hfs_swap_BTNode: invalid node height (86)
hfs_swap_BTNode: offsets 103 and 104 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6984)
hfs_swap_BTNode: invalid forward link (0x00740072)
hfs_swap_BTNode: invalid backward link (0x0069006E)
hfs_swap_BTNode: invalid node height (103)
hfs_swap_BTNode: record #112 invalid offset (0x0067)
Invalid node structure
(4, 6985)
hfs_swap_BTNode: invalid backward link (0x00020000)
hfs_swap_BTNode: record #-1 invalid offset (0x0073)
Invalid node structure
(4, 6987)
hfs_swap_BTNode: invalid forward link (0x00740072)
hfs_swap_BTNode: invalid backward link (0x0069006E)
hfs_swap_BTNode: invalid node height (103)
hfs_swap_BTNode: offsets 113 and 114 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6988)
hfs_swap_BTNode: invalid node height (11)
hfs_swap_BTNode: invalid record count (0x5581)
Invalid record count
(4, 6990)
hfs_swap_BTNode: record #-1 invalid offset (0x0073)
Invalid node structure
(4, 6995)
hfs_swap_BTNode: invalid forward link (0x00020086)
hfs_swap_BTNode: invalid node height (11)
hfs_swap_BTNode: invalid record count (0x55DC)
Invalid record count
(4, 6996)
hfs_swap_BTNode: invalid forward link (0x00610072)
hfs_swap_BTNode: invalid backward link (0x00640044)
hfs_swap_BTNode: invalid node height (101)
hfs_swap_BTNode: offsets 114 and 115 out of order (0x0000, 0x0000)
Invalid node structure
(4, 6997)
hfs_swap_BTNode: invalid forward link (0x006F006C)
hfs_swap_BTNode: invalid backward link (0x006C0065)
hfs_swap_BTNode: invalid node height (114)
hfs_swap_BTNode: record #45 invalid offset (0x0069)
Invalid node structure
(4, 7001)
hfs_swap_BTNode: invalid forward link (0x002E0073)
hfs_swap_BTNode: invalid backward link (0x00740072)
hfs_swap_BTNode: invalid node height (105)
hfs_swap_BTNode: offsets 108 and 109 out of order (0x0000, 0x0000)
Invalid node structure
(4, 7002)
hfs_swap_BTNode: invalid node kind (-127)
hfs_swap_BTNode: invalid node height (164)
hfs_swap_BTNode: record #-1 invalid offset (0x006D)
Invalid node structure
(4, 7003)
hfs_swap_BTNode: invalid forward link (0x00700061)
hfs_swap_BTNode: invalid backward link (0x00720065)
hfs_swap_BTNode: invalid node height (86)
hfs_swap_BTNode: offsets 103 and 104 out of order (0x0000, 0x0000)
Invalid node structure
(4, 7004)
hfs_swap_BTNode: invalid forward link (0x00740072)
hfs_swap_BTNode: invalid backward link (0x0069006E)
hfs_swap_BTNode: invalid node height (103)
hfs_swap_BTNode: offsets 112 and 113 out of order (0x0000, 0x0000)
Invalid node structure
(4, 7005)
hfs_swap_BTNode: invalid backward link (0x00020000)
hfs_swap_BTNode: record #-1 invalid offset (0x0069)
Invalid node structure
(4, 7007)
hfs_swap_BTNode: invalid forward link (0x006E0067)
hfs_swap_BTNode: invalid backward link (0x00730002)
hfs_swap_BTNode: invalid node height (134)
hfs_swap_BTNode: record #-1 invalid offset (0x0067)
Invalid node structure
(4, 7008)
hfs_swap_BTNode: invalid forward link (0x00730006)
hfs_swap_BTNode: invalid backward link (0x000B56C5)
hfs_swap_BTNode: offsets 2 and 3 out of order (0x0000, 0x0000)
Invalid node structure
(4, 7009)
hfs_swap_BTNode: record #-1 invalid offset (0x0061)
Invalid node structure
(4, 7016)
hfs_swap_BTNode: invalid forward link (0x006C0069)
hfs_swap_BTNode: invalid backward link (0x007A0061)
hfs_swap_BTNode: invalid node height (98)
hfs_swap_BTNode: offsets 106 and 107 out of order (0x0000, 0x0000)
Invalid node structure
(4, 7017)
hfs_swap_BTNode: invalid forward link (0x00790050)
hfs_swap_BTNode: invalid backward link (0x00690063)
hfs_swap_BTNode: invalid node height (107)
hfs_swap_BTNode: offsets 98 and 99 out of order (0x0072, 0x0050)
Invalid node structure
(4, 7018)
hfs_swap_BTNode: invalid forward link (0x00720069)
hfs_swap_BTNode: invalid backward link (0x00760056)
hfs_swap_BTNode: invalid node height (105)
hfs_swap_BTNode: offsets 99 and 100 out of order (0x0000, 0x0000)
Invalid node structure
(4, 7019)
hfs_swap_BTNode: invalid forward link (0x00690063)
hfs_swap_BTNode: invalid backward link (0x0061002D)
hfs_swap_BTNode: invalid node height (115)
hfs_swap_BTNode: offsets 102 and 103 out of order (0x0000, 0x0000)
Invalid node structure
(4, 7021)
hfs_swap_BTNode: invalid forward link (0x00860000)
hfs_swap_BTNode: invalid node kind (87)
hfs_swap_BTNode: invalid node height (225)
hfs_swap_BTNode: invalid record count (0xCE58)
Invalid record count
(4, 7022)
hfs_swap_BTNode: record #-1 invalid offset (0x0069)
Invalid node structure
(4, 7023)
hfs_swap_BTNode: invalid forward link (0x0065006C)
hfs_swap_BTNode: invalid backward link (0x00640070)
hfs_swap_BTNode: invalid node height (97)
hfs_swap_BTNode: record #97 invalid offset (0x006F)
Invalid node structure
(4, 7024)
hfs_swap_BTNode: invalid backward link (0x00120184)
hfs_swap_BTNode: invalid node kind (-102)
hfs_swap_BTNode: invalid node height (18)
hfs_swap_BTNode: invalid forward link (0x002D0032)
hfs_swap_BTNode: invalid backward link (0x002D006F)
hfs_swap_BTNode: invalid node height (99)
hfs_swap_BTNode: record #99 invalid offset (0x0065)
Invalid node structure
(4, 7027)
hfs_swap_BTNode: invalid forward link (0x006E0069)
hfs_swap_BTNode: invalid backward link (0x0061002D)
hfs_swap_BTNode: invalid node height (115)
hfs_swap_BTNode: record #102 invalid offset (0x0069)
Invalid node structure
(4, 7028)
hfs_swap_BTNode: invalid backward link (0x0184A0B1)
hfs_swap_BTNode: record #21 invalid offset (0x81A4)
Invalid node structure
(4, 7030)
hfs_swap_BTNode: record #-1 invalid offset (0x0075)
Invalid node structure
(4, 7031)
hfs_swap_BTNode: invalid forward link (0x00740068)
hfs_swap_BTNode: invalid backward link (0x002D0073)
hfs_swap_BTNode: invalid node height (104)
hfs_swap_BTNode: record #102 invalid offset (0x0073)
Invalid node structure
(4, 7032)
** Rechecking volume.
** Checking Journaled HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
Missing thread record (id = 691885)
Missing thread record (id = 691919)
Incorrect number of thread records
(4, 23903)
CheckCatalogBTree: dirCount = 140937, dirThread = 140885
Incorrect number of thread records
(4, 23903)
CheckCatalogBTree: fileCount = 701678, fileThread = 701730
** Checking multi-linked files.
** Checking Catalog hierarchy.
Missing thread record (id = 741414)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741420)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741429)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741435)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741432)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741444)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741438)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741459)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741441)
Invalid directory item count
(It should be 0 instead of 2)
Invalid directory item count
(It should be 9 instead of 13)
Missing thread record (id = 741450)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741426)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741465)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741453)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741492)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741456)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741462)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741468)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741471)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741447)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741474)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741417)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741477)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741480)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741483)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741489)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741486)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741498)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741504)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741507)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741423)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 741495)
Invalid directory item count
(It should be 0 instead of 2)
Invalid directory item count
(It should be 201 instead of 227)
Missing thread record (id = 741510)
Invalid directory item count
(It should be 0 instead of 1)
Missing thread record (id = 691884)
Invalid directory item count
(It should be 0 instead of 4)
Missing thread record (id = 691911)
Invalid directory item count
(It should be 0 instead of 1)
Missing thread record (id = 691913)
Invalid directory item count
(It should be 0 instead of 1)
Missing thread record (id = 691915)
Invalid directory item count
(It should be 0 instead of 1)
Missing thread record (id = 691917)
Invalid directory item count
(It should be 0 instead of 1)
Missing thread record (id = 691919)
Invalid directory item count
(It should be 2 instead of 5)
Missing thread record (id = 691904)
Invalid directory item count
(It should be 0 instead of 1)
Missing thread record (id = 691906)
Invalid directory item count
(It should be 0 instead of 2)
Missing thread record (id = 691909)
Invalid directory item count
(It should be 0 instead of 1)
Missing thread record (id = 743122)
Invalid directory item count
(It should be 0 instead of 3)
Invalid directory item count
(It should be 165 instead of 417)
Invalid volume directory count
(It should be 140922 instead of 140936)
Invalid volume file count
(It should be 701648 instead of 701678)
** Checking Extended Attributes file.
Incorrect number of Extended Attributes
(It should be 347482 instead of 346415)
** Checking volume bitmap.
Volume Bit Map needs minor repair
** Checking volume information.
Invalid volume free block count
(It should be 59615838 instead of 50477719)
invalid VHB nextCatalogID
invalid VHB attributesFile.clumpSize
Volume Header needs minor repair
(2, 0)
Verify Status: VIStat = 0xa000, ABTStat = 0x0040 EBTStat = 0x0000
CBTStat = 0x0800 CatStat = 0x00004200
** Repairing volume.
Missing directory record (id = 691885)
** Look for missing items in lost+found directory.
FixOrphanedFiles: Created thread record for id=743119 (err=0)
FixOrphanedFiles: Created thread record for id=743121 (err=0)
FixOrphanedFiles: Created thread record for id=742222 (err=0)
FixOrphanedFiles: Created thread record for id=743122 (err=0)
FixOrphanedFiles: Created thread record for id=691904 (err=0)
FixOrphanedFiles: Created thread record for id=691906 (err=0)
FixOrphanedFiles: Created thread record for id=691909 (err=0)
FixOrphanedFiles: Created thread record for id=691911 (err=0)
FixOrphanedFiles: Created thread record for id=691913 (err=0)
FixOrphanedFiles: Created thread record for id=691915 (err=0)
FixOrphanedFiles: Created thread record for id=691917 (err=0)
FixOrphanedFiles: Created thread record for id=743120 (err=0)
FixOrphanedFiles: Created thread record for id=743357 (err=0)
FixOrphanedFiles: Created thread record for id=743358 (err=0)
FixOrphanedFiles: Created thread record for id=743359 (err=0)
FixOrphanedFiles: Created thread record for id=743360 (err=0)
FixOrphanedFiles: Created thread record for id=743361 (err=0)
FixOrphanedFiles: Created thread record for id=743362 (err=0)
FixOrphanedFiles: Created thread record for id=743363 (err=0)
FixOrphanedFiles: Created thread record for id=741510 (err=0)
FixOrphanedFiles: Created thread record for id=741522 (err=0)
FixOrphanedFiles: Created thread record for id=741523 (err=0)
FixOrphanedFiles: Created thread record for id=691884 (err=0)
FixOrphanedFiles: Created thread record for id=742221 (err=0)
FixOrphanedFiles: Created thread record for id=742785 (err=0)
FixOrphanedFiles: Created thread record for id=742253 (err=0)
FixOrphanedFiles: Created thread record for id=742813 (err=0)
FixOrphanedFiles: Created thread record for id=742213 (err=0)
FixOrphanedFiles: Created thread record for id=742214 (err=0)
FixOrphanedFiles: Created thread record for id=742215 (err=0)
FixOrphanedFiles: Created thread record for id=742216 (err=0)
FixOrphanedFiles: Created thread record for id=742841 (err=0)
FixOrphanedFiles: Created thread record for id=742869 (err=0)
FixOrphanedFiles: Created thread record for id=742925 (err=0)
FixOrphanedFiles: Created thread record for id=742449 (err=0)
FixOrphanedFiles: Created thread record for id=742897 (err=0)
FixOrphanedFiles: Created thread record for id=743009 (err=0)
FixOrphanedFiles: Created thread record for id=743037 (err=0)
FixOrphanedFiles: Created thread record for id=743065 (err=0)
FixOrphanedFiles: Created thread record for id=742218 (err=0)
FixOrphanedFiles: Created thread record for id=743093 (err=0)
FixOrphanedFiles: Created thread record for id=742309 (err=0)
FixOrphanedFiles: Created thread record for id=742981 (err=0)
FixOrphanedFiles: Deleted thread record for id=691886 (err=0)
FixOrphanedFiles: Created thread record for id=691903 (err=0)
FixOrphanedFiles: Created thread record for id=741414 (err=0)
FixOrphanedFiles: Created thread record for id=741420 (err=0)
FixOrphanedFiles: Created thread record for id=741429 (err=0)
FixOrphanedFiles: Created thread record for id=741435 (err=0)
FixOrphanedFiles: Created thread record for id=741432 (err=0)
FixOrphanedFiles: Created thread record for id=741444 (err=0)
FixOrphanedFiles: Created thread record for id=741438 (err=0)
FixOrphanedFiles: Created thread record for id=741459 (err=0)
FixOrphanedFiles: Created thread record for id=741441 (err=0)
FixOrphanedFiles: Created thread record for id=741450 (err=0)
FixOrphanedFiles: Created thread record for id=741426 (err=0)
FixOrphanedFiles: Created thread record for id=741465 (err=0)
FixOrphanedFiles: Created thread record for id=741453 (err=0)
FixOrphanedFiles: Created thread record for id=741492 (err=0)
FixOrphanedFiles: Created thread record for id=741456 (err=0)
FixOrphanedFiles: Created thread record for id=741462 (err=0)
FixOrphanedFiles: Created thread record for id=741468 (err=0)
FixOrphanedFiles: Created thread record for id=741471 (err=0)
FixOrphanedFiles: Created thread record for id=741447 (err=0)
FixOrphanedFiles: Created thread record for id=741474 (err=0)
FixOrphanedFiles: Created thread record for id=741417 (err=0)
FixOrphanedFiles: Created thread record for id=741477 (err=0)
FixOrphanedFiles: Created thread record for id=741480 (err=0)
FixOrphanedFiles: Created thread record for id=741483 (err=0)
FixOrphanedFiles: Created thread record for id=741489 (err=0)
FixOrphanedFiles: Created thread record for id=741486 (err=0)
FixOrphanedFiles: Created thread record for id=741498 (err=0)
FixOrphanedFiles: Created thread record for id=741504 (err=0)
FixOrphanedFiles: Created thread record for id=741507 (err=0)
FixOrphanedFiles: Created thread record for id=741423 (err=0)
FixOrphanedFiles: Created thread record for id=741495 (err=0)
FixOrphanedFiles: Deleted thread record for id=740809 (err=0)
FixOrphanedFiles: Deleted thread record for id=740810 (err=0)
FixOrphanedFiles: Deleted thread record for id=740811 (err=0)
FixOrphanedFiles: Deleted thread record for id=740812 (err=0)
FixOrphanedFiles: Deleted thread record for id=740813 (err=0)
FixOrphanedFiles: Deleted thread record for id=740814 (err=0)
FixOrphanedFiles: Deleted thread record for id=740815 (err=0)
FixOrphanedFiles: Deleted thread record for id=740816 (err=0)
FixOrphanedFiles: Deleted thread record for id=740817 (err=0)
FixOrphanedFiles: Deleted thread record for id=740826 (err=0)
FixOrphanedFiles: Deleted thread record for id=740827 (err=0)
FixOrphanedFiles: Deleted thread record for id=740828 (err=0)
FixOrphanedFiles: Deleted thread record for id=740829 (err=0)
FixOrphanedFiles: Deleted thread record for id=740830 (err=0)
FixOrphanedFiles: Deleted thread record for id=740925 (err=0)
FixOrphanedFiles: Deleted thread record for id=740926 (err=0)
FixOrphanedFiles: Deleted thread record for id=740927 (err=0)
FixOrphanedFiles: Deleted thread record for id=740928 (err=0)
FixOrphanedFiles: Deleted thread record for id=740929 (err=0)
FixOrphanedFiles: Deleted thread record for id=740930 (err=0)
FixOrphanedFiles: Deleted thread record for id=740931 (err=0)
FixOrphanedFiles: Deleted thread record for id=740932 (err=0)
FixOrphanedFiles: Deleted thread record for id=740933 (err=0)
FixOrphanedFiles: Deleted thread record for id=740934 (err=0)
FixOrphanedFiles: Deleted thread record for id=740935 (err=0)
FixOrphanedFiles: Created thread record for id=741405 (err=0)
FixOrphanedFiles: Created thread record for id=741406 (err=0)
FixOrphanedFiles: Created thread record for id=741402 (err=0)
FixOrphanedFiles: Created thread record for id=741403 (err=0)
FixOrphanedFiles: Created thread record for id=741401 (err=0)
FixOrphanedFiles: Created thread record for id=741407 (err=0)
FixOrphanedFiles: Created thread record for id=741404 (err=0)
FixOrphanedFiles: Created thread record for id=741408 (err=0)
FixOrphanedFiles: Created thread record for id=741409 (err=0)
FixOrphanedFiles: Deleted thread record for id=743563 (err=0)
FixOrphanedFiles: Deleted thread record for id=743564 (err=0)
FixOrphanedFiles: Deleted thread record for id=743565 (err=0)
FixOrphanedFiles: Deleted thread record for id=743566 (err=0)
FixOrphanedFiles: Deleted thread record for id=743567 (err=0)
FixOrphanedFiles: Deleted thread record for id=743568 (err=0)
FixOrphanedFiles: Deleted thread record for id=743569 (err=0)
FixOrphanedFiles: Deleted thread record for id=743570 (err=0)
FixOrphanedFiles: Deleted thread record for id=743571 (err=0)
FixOrphanedFiles: Deleted thread record for id=743572 (err=0)
FixOrphanedFiles: Deleted thread record for id=743573 (err=0)
FixOrphanedFiles: Deleted thread record for id=743574 (err=0)
FixOrphanedFiles: Deleted thread record for id=743575 (err=0)
FixOrphanedFiles: Deleted thread record for id=743576 (err=0)
FixOrphanedFiles: Deleted thread record for id=743577 (err=0)
FixOrphanedFiles: Deleted thread record for id=743578 (err=0)
FixOrphanedFiles: Deleted thread record for id=743579 (err=0)
FixOrphanedFiles: Deleted thread record for id=743580 (err=0)
FixOrphanedFiles: Deleted thread record for id=743581 (err=0)
FixOrphanedFiles: Deleted thread record for id=743582 (err=0)
FixOrphanedFiles: Deleted thread record for id=743583 (err=0)
FixOrphanedFiles: Deleted thread record for id=743584 (err=0)
FixOrphanedFiles: Deleted thread record for id=743585 (err=0)
FixOrphanedFiles: Deleted thread record for id=743586 (err=0)
FixOrphanedFiles: Deleted thread record for id=743587 (err=0)
FixOrphanedFiles: Deleted thread record for id=743588 (err=0)
FixOrphanedFiles: Deleted thread record for id=743589 (err=0)
FixOrphanedFiles: Deleted thread record for id=743590 (err=0)
FixOrphanedFiles: Deleted thread record for id=743591 (err=0)
FixOrphanedFiles: Deleted thread record for id=743592 (err=0)
FixOrphanedFiles: Deleted thread record for id=743593 (err=0)
FixOrphanedFiles: Deleted thread record for id=743594 (err=0)
FixOrphanedFiles: Deleted thread record for id=743595 (err=0)
FixOrphanedFiles: Deleted thread record for id=743596 (err=0)
FixOrphanedFiles: Deleted thread record for id=743597 (err=0)
FixOrphanedFiles: Deleted thread record for id=743598 (err=0)
FixOrphanedFiles: Deleted thread record for id=743599 (err=0)
FixOrphanedFiles: Deleted thread record for id=743600 (err=0)
FixOrphanedFiles: Deleted thread record for id=743601 (err=0)
FixOrphanedFiles: Deleted thread record for id=743602 (err=0)
FixOrphanedFiles: Deleted thread record for id=743603 (err=0)
FixOrphanedFiles: Deleted thread record for id=743604 (err=0)
FixOrphanedFiles: Deleted thread record for id=743605 (err=0)
FixOrphanedFiles: Deleted thread record for id=743606 (err=0)
FixOrphanedFiles: Deleted thread record for id=743607 (err=0)
FixOrphanedFiles: Deleted thread record for id=743608 (err=0)
FixOrphanedFiles: Deleted thread record for id=743609 (err=0)
FixOrphanedFiles: Deleted thread record for id=743610 (err=0)
FixOrphanedFiles: Deleted thread record for id=743611 (err=0)
FixOrphanedFiles: Deleted thread record for id=743612 (err=0)
FixOrphanedFiles: Deleted thread record for id=743613 (err=0)
FixOrphanedFiles: Deleted thread record for id=743614 (err=0)
FixOrphanedFiles: Deleted thread record for id=743615 (err=0)
FixOrphanedFiles: Deleted thread record for id=756412 (err=0)
FixOrphanedFiles: Deleted thread record for id=782888 (err=0)
FixOrphanedFiles: Deleted thread record for id=2049005 (err=0)
FixOrphanedFiles: Deleted thread record for id=8863256 (err=0)
** Rechecking volume.
** Checking Journaled HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
Missing thread record (id = 691886)
Missing thread record (id = 2049005)
Incorrect number of thread records
(4, 23903)
CheckCatalogBTree: dirCount = 140939, dirThread = 140941
** Checking multi-linked files.
** Checking Catalog hierarchy.
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid directory item count
(It should be 0 instead of 25)
Invalid volume file count
(It should be 701653 instead of 701678)
** Checking Extended Attributes file.
Invalid map node
(8, 0)
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x4000 EBTStat = 0x0000
CBTStat = 0x0800 CatStat = 0x00004200
** Repairing volume.
Missing directory record (id = 2049005)
Missing directory record (id = 691886)
** Look for missing items in lost+found directory.
** Rechecking volume.
** Checking Journaled HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking multi-linked files.
** Checking Catalog hierarchy.
** Checking Extended Attributes file.
** Checking volume bitmap.
** Checking volume information.
Invalid volume file count
(It should be 701678 instead of 701653)
Verify Status: VIStat = 0x8000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x0000 CatStat = 0x00000000
** The volume MACINTOSH HD could not be repaired after 3 attempts.
volume type is pure HFS+
primary MDB is at block 0 0x00
alternate MDB is at block 0 0x00
primary VHB is at block 2 0x02
alternate VHB is at block 975093950 0x3a1ec0be
sector size = 512 0x200
VolumeObject flags = 0x07
total sectors for volume = 975093952 0x3a1ec0c0
total sectors for embedded volume = 0 0x00
fadil-shamir-khans-mac-mini:~ silentarts$
After all of that was done, I am now able to go back to Disk Utility and Completely Verify My Disk.
What should my next step be? Should I try booting to Mavericks from that hard drive or should I try to Repair the Disk?I upgraded to Mavericks, and had a "grey screen of death" when re-booting for the first time. Re-setting the PRAM fixed it for me. Worth a try:
http://support.apple.com/kb/ph14222 -
Mac OS X 10.6.8 won't restart for software update
The Mac doesn't properly restart to install software update (along with other updates), instead it goes directly to the log in for different users.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Won't restart after installing updates
Hi everyone,
I downloaded the 10.5.2 upgrade through the software updater, and my computer crashed during installation.
When I tried to restart it, it got stuck on the grey apple logo screen, with the progress cycle spinning. It stays stuck like this for an hour.
I tried safe mode restart then (with the shift key help down), and that didn't help anything. Is there anything else I can try?
Thanks!Hi there,
I have had the same problem after installing the update. The system hang at this position with all fans running for which I have shut down the computer each time but with the same outcome after new booting. Lastly, I booted holding the C key and this worked. Might be a coincidence, worth a try.
Cheers -
Powerbook won't restart after security update
I can not get my Powerbook G4 to restart after the latest security update. It acts like the hard drive is not there. What can I do?
The first thing to do would be to boot from the Install & Restore disc that came with your machine by:
1. Inserting the disc, pressing the power button, and immediately after the startup chime, press and hold the C key until you see the spinning gear icon appear on the grey splash screen.
2. After the machine has booted, pick your language, and when the Installer window appears, do not press Continue, but go to the Utilities menu in the menubar and open Disk Utility.
3. In Disk Utility, choose your normal startup volume in the pane on the left and then click Repair Disk. If any errors show in the window, run Repair Disk again until you see 'The volume appears to be OK' in green.
4. Quit Disk Utility, quit the installer and attempt to restart into your regular startup volume.
If that doesn't get you anywhere, you may need to re-install the OS from those disks.
Joe -
MacBook Pro won't restart after OS update
Was prompted last night to do an OS Software update. I was running 10.8.3. I started the update and had to run out. When I returned, the screen said i needed to restart my computer to install the updates. I did, and now I can't restart/reboot past the Apple Logo and progress bar which gets to about 1/6th in progress. The computer just shuts down?? Need help please. Thanks!
Hey JamoBook Pro,
If you MacBook Pro does not startup, check out this article that will walk you through troubleshooting and resolving the issue.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Applications won't open after software update
after i installed an automatic software update on my iBook G4, and did the restart, several applications won't open such as Safari, iTunes, iChat. I tried to reinstall the software update, but that won't open either. it just jumps up and down like normal, and then won't open. after i try again, it jumps only once. what the heck is happening??? and i'm not very computer smart so dumb it up for me
Hello, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates. -
MP wont restart after software update
I just did the recent batch of updates including system update, QT, Motion, and many more and suddenly in the middle of a panic of deadlines, the computer will not get past the rotating ring/clock that often happens for only a few moments on any OSX machine. In the old days I'd disconnect SCSI, the network connection, etc. but am not sure where to go on the new machine and given the deadline am afraid to go hogwild. It's a brand-spankin' new machine so the fact this has gone 20+ minutes is mind-blowing.
Any ideas, much appreciated with any trouble shooting help.
PS: i'm on my powerbook -- that machine seems to be in a coma.
Thanks,
Dan T.Hi and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates. -
10.6.8 won't boot after Software Update
I've installed 10.6.8 via Software Update and the Macbook Pro will not boot, causes a kernel panic. It will boot in Safe Boot however. I've tried installing the combo update as well, no change. Verify disk permissions, no change. Help!
panic(cpu 2 caller 0x2abf6a): Kernel trap at 0x0029f24f, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x7aae9000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x7a6fe06c, EBX: 0xec835381, ECX: 0xfcf7b1e9, EDX: 0x7aae8ffd
CR2: 0x7aae9000, EBP: 0x820ebd18, ESI: 0x00000000, EDI: 0xec835381
EFL: 0x00010202, EIP: 0x0029f24f, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000002
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x820ebb18 : 0x21b837 (0x5dd7fc 0x820ebb4c 0x223ce1 0x0)
0x820ebb68 : 0x2abf6a (0x59e3d0 0x29f24f 0xe 0x59e59a)
0x820ebc48 : 0x2a1a78 (0x820ebc60 0x0 0x820ebd18 0x29f24f)
0x820ebc58 : 0x29f24f (0xe 0x20650048 0x820e0010 0x2a0010)
0x820ebd18 : 0x8255448f (0xfcf7b1e9 0xec835381 0xfcf7b1e9 0xec835381)
0x820ebd58 : 0x82556ef9 (0x588ffd 0x81fcf7b6 0x8255bab0 0x53c996)
0x820ebe18 : 0x543f60 (0xc654100 0xbefdf00 0x1 0x506b76)
0x820ebe78 : 0x542137 (0xbefdf00 0xc654100 0x5e5209 0x1)
0x820ebf28 : 0x5426e9 (0xbefdf00 0xc5873c0 0x0 0x516766)
0x820ebf78 : 0x5443d5 (0xbefdf00 0x0 0x820ebfac 0x1)
0x820ebfc8 : 0x2a179c (0xc61ff90 0x0 0x2a17ab 0xc467000)
Kernel Extensions in backtrace (with dependencies):
com.metakine.handsoff.driver(1.2.4)@0x82551000->0x8255ffff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,1 (Mac-F22589C8)
System uptime in nanoseconds: 1576987135
unloaded kexts:
(none)
loaded kexts:
com.metakine.handsoff.driver 1.2.4
com.apple.driver.MaxTranserSizeOverrideDriver 2.6.1 - last loaded 1338933558
com.apple.driver.AppleUSBTCKeyEventDriver 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0Uninstall the Metakine software then do the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Quit the installer and restart. Now download the Mac OS X 10.6.8 Update Combo and update.
Maybe you are looking for
-
Hi I need to want to load a java program on startup and I don't know how. Is it possible to have a script that tells the operating system to load it on startup or can it only be done through the operating system's settings?
-
I have a Lexmark S305 wireless printer that is networked. Can I use it to print directly from our new iPad3?
-
When I drag clips from the Viewer to the Timeline I get audio and video together, but afterwards they are separate. They aren't selected together unless I do a shift-click selection, and even then I can't trim both at once. FCE does seem to remember
-
Exporting photos with adjustments
I've recently been sorting through pictures from various events, and I've made some adjustments to them in lightroom - cropping, tone etc. However, when I export the images, the adjustments aren't applied and the images are just as they were input. H
-
WLC 4402, LAP1242AG APs and Layer 2 Switch Network Design
Hi Every One, I am new designer in the Wireless technology. During design i came accros through a confusing/complex existing topology which i have to integrate with WLC 4402 as below; Existing: 1: I have 12 Switches; all vtp mode server. all in singl