Mac 10.7.5 and Adobe Photoshop elements 13/Premiere 13
I have Mac 10.7.5.
I presently have Adobe Photoshop 11/Premier 11
I purchased Adobe 13 for an upgrade.
Will I be able to upgrade smoothly or do I need 10.8?
Thanks
Michael
You need to convert a redemption code comprising numbers and letters into the product key (serial number) which will be all numbers commencing 1057
https://redeem.licenses.adobe.com/getserial
Similar Messages
-
RAW and adobe photoshop elements 12
I bought a sony alpha 77II and can not open in adobe photoshop elements 12. Image data converter not ok because to much colour pre-defined.
Super !! Thanks a lot for the info, yes it works with 8.5 !!!!
Van: R_Kelly
Verzonden: donderdag 1 januari 2015 20:37
Aan: thierry ferfers
Onderwerp: RAW and adobe photoshop elements 12
RAW and adobe photoshop elements 12
created by R_Kelly <https://forums.adobe.com/people/R_Kelly> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/7057869#7057869> -
Will Adobe Photoshop 6 and Adobe Photoshop Elements 2.0 run on Windows 7?
Will Adobe Photoshop 6 and Adobe Photoshop Elements 2.0 run on Windows 7?
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/will-adobe-pho toshop-6-work-with-windows-7/6778ddce-6373-e011-8dfc-68b599b31bf5?msgId=7a63bec3-7273-e011 -8dfc-68b599b31bf5
http://forums.adobe.com/thread/593541 -
Is there a difference between Adobe Photoshop 7.0 and Adobe Photoshop Elements 7.0?
Yes: (these are just general differences, not specific to either photoshop 7 or photoshop elements 7)
(photoshop elements does offter one thing not mentioned that photoshop 7 doesn't have, a camera raw plugin that doesn't cost extra)
(photoshop elements 10 and photoshop cs5 are the current versions)
http://simplephotoshop.com/photoshop_elements/photoshopelements_vs_photoshop.htm
http://graphicssoft.about.com/cs/photoshop/f/elementscompare.htm -
Clash between Adobe reader and adobe photoshop elements
I have both adobe reader and adobe photoshop elements 6 installed on my computer.. Since upgrading to the current version of Reader, when I attempt to open a PDF file using reader the file goes straight to Adobe photoshop, were of course it doesn't open properly. How do i fix this ?
I am using Windows 8.1
I think the problem arose when I changed computers and began using
Windows 8.1
On Wed, Jun 11, 2014 at 5:54 PM, Pat Willener <[email protected]> -
I don't understand how elements organizer and adobe photoshop elements relate - how/where do I save edited photos? I tried to save them on my hard drive and the result was a 65 MB file!!! Not sure what I'm doing wrong :/ - maybe I'm saving the entire folder every time instead of just an individual photo?
There is no standard field for faces. To transfer information you must put it in the standard place that the new program will use. That does not exist for faces. One work around would be to use keywords. You include the available metadata in a photo by checking all if the boxes when you export the photo(s). What the receiving program is determined by the authors of that program. All iPhoto can do is write what it offers to the IPTC & EXIF fields which it will
LN -
Adobe Photoshop Elements 10 & Premiere Elements 10 for Windows 7 64 bit install
I have Adobe Photoshop Elements 10 & Premiere Elements 10 for Windows & Mac - Full Bundle Version. It comes with 5 disk, to install on win 7 64 bit you use disk 2, what is disk #4 used for?
No instuctions found with software and Adobe chat does not know. Thank youIt is the content disc for Windows. You can find additional details at Install Premiere Elements, Photoshop Elements - http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html.
-
Adobe Photoshop elements 10 & Premiere elements 10
I bought Adobe Photoshop elements 10 & Premiere elements 10 but I'm struggling to install it. Please assist. I have Windows 8. Even if it is just to the download link.
Please see http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQ which discusses how to download your purchased Adobe software.
-
Download of Adobe Photoshop Elements 12 & Premiere Elements 12 STE - Edition
Hello,
I own a STE-License for Adobe Photoshop Elements 12 & Premiere Elements 12.
How / Where can I download both applications?
I appreciate for any help.
AlexPSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html -
Am new to Mac. Downloaded Adobe Photoshop Elements and am trying to open it but they want a redemption code and a serial number. Since I downloaded it I don't have either of those but apparently I am missing something because I can't use it unless I enter that info and I don't know where to find it. Can you please help me figure this out. If I purchased the software I would have the serial number but as I said, I purchased and downloaded. Marianne
Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-and https://forums.adobe.com/thread/1572504
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html -
Adobe premiere elements 10 and Adobe Photoshop elements 10
I just purchased the Adobe premiere elements 10 with the Adobe photoshop elements 10 and it came with 5 disc. do I need to install all of them. The first dics says to start with it for Windows. then it says with windows 7 64 bit to start with disc 2. then says for MacOS start with disc 3. Not sure if I have to install all of them
Quick Start Guide
You only need to use one single disk to complete the installations.
Windows (32 bit systems) e.g. XP, Vista and Windows 7 (x86)
Use disk 1
Windows 7 (64 bit systems)
Use Disk 2
Mac OSX
Use Disk 3
Disks 4 and 5 are optional (but not essential) providing SD & HD video content templates, themes and menus for movies and DVD’s. Use these if you have purchased Premiere Elements or wish to keep the free trial after 30 days.
All Windows Systems - install disk 4 only
Mac OSX - install disk 5 only -
Scanning photos and Adobe Photoshop Elements 9 system requirements
Hello all-
A long, involved question here, so bear with me.
I have a Power Mac G4, still working fine even though it's almost 8 years old.
I want to scan a number of photos for use in a Final Cut Pro 5 project. (I have an Epson Workforce 610 all-in-one scanner). If I understand correctly, the scanner will scan in square pixels, which is no good for video, so I will need to re-save the images in non-square pixels (or rectangular pixels with an 0.9 PAR?). I will also probably want to touch up/re-size a number of the image stills.
It seems to me that I could do this in Adobe Photoshop Elements, only my G4 doesn't have the necessary system requirements. Elements 9 needs a higher operating system, which I can't get because my G4 doesn't have an Intel processor. A side issue is that I also don't have a very large hard drive since the computer is so old (75 GB, about 15 GB free). But I plan to alter the images and then save them to an external drive which has plenty of space.
What to do? I have I-photo '09, but that doesn't seem to have the same functionality as Photoshop Elements 9. Should I try to get an old version of Elements on ebay? Do past versions of Elements have the option of converting from square to non-square pixels? Will past versions of Elements even work on my G4? (I read something which suggested that really old versions, like Elements 2, might not).
Any other options? (Short of buying a new computer, which I don't really want to do).
Thoughts? Advice?
Thanks in advance for any and all help. I'm going to post this in a couple of different forums since I'm not exactly sure where the right place to ask this question is.
--RoopHi there,
I've read it can be done in FCP, perhaps an older version of that.
What speed is your G4?
Have you tried it in iMovie 06 HD?
I wonder if GraphicConverter can do it...
http://www.macupdate.com/info.php/id/263 -
Aperture 3 and Adobe Photoshop Elements 10 problems.
I have installed Adobe Photoshop Elements 10, which I have setup as plugin for Aperture 3. In Aperture preferences the photos are exported as 8 bit TIFF 300 DPI, no profile and automatically stack new versions selected in general.
I right click on selected image (version) in Aperture and select edit with Elements, this create another version of the same photo in Aperture but increasing size from say 5MB to around 40MB. The Elements programme opens in Elements editor but the selected image is not there, I can only drag it in from Aperture. I then edit the image, then click save, it open a box save as and to a wierd folder like Uwvo2vg etc. I click save, get message saying it will overwrite file of same name, click save using a unique name. When I go back to Aperture, the edited file is not there and when I search for the unique name, nothing comes up.I had somewhat similar problems running Elements 10 as external editor, but under 10.6.8. The simplest fix is to send .psd's instead of .tiff. You can change that in preferences.
If you must use .tiff (I do, becaues PTLens doesn't like psd) you have to change the file extension to .tiff in the save dialog. Elements saves as .tif and Aperture saves as .tiff. Notice the number of 'f' at end of extension.
Here's what was happening to me, which is a little different:
• when you send to external editor, Aperture saves a .tiff and opens it in in Elements
• you do your work and close the file
• Elements saves as .tif, and so doesn't overwrite the Aperture tiff.
• Aperture doesn't know the .tif exists so it shows you the un-edited .tiff that if made at the beginning
I get around this at the save dialog in Elements. Basically Elements goes into a Save As kind of dialog, so if I add the extra 'f' at the end, Elements asks if I want to over-write the existing file, and when I say yes the changes show in Aperture.
If you open Elements and go to 'Recent Files' (or something like that), you can see the .tif and .tiff files together. If you delete the .tiff and add the extra 'f' to the Elements .tif, the changes will show in Aperture.
What you shouldn't be doing is changing the name of the file in Elements. For the edits to show in Aperture you need to save the file with the same name and change the extension to .tiff. The file that Elements saves must have exactly the same name as the one Aperture made, because that's the file that Aperture knows about.
If you do a library database repair, Aperture will find these .tifs and add them to the library, but they won't be where they should be. The show up in a recovered file folder at the bottom.
Note that Elements 8 didn't have this kind of trouble. And note that I'm not running Lion, so some of the behaviors I describe may be different that what Lion users see. -
Sharing files between Adobe Premiere Elements and Adobe Photoshop Elements
This question was posted in response to the following article: http://help.adobe.com/en_US/premiereelements/using/WS72D069B5-1663-44a9-BB4E-8182DB2EE6C6. html
msnexplorer
I suspect that this latest set of details is clouding the way to success.
Typically we would be looking at integrated Photoshop Elements and Premiere Elements set. I thought that we were working with Photoshop Elements 8 and Premiere Elements 8.0/8.0.1 which would considered an integrated set.
Let approach this from a different angle.
Have you any idea what version of Premiere Elements your project.prel came from? Reflecting back, the concept of integrated combos of Photoshop Elements and Premiere Elements did not appear until the combo of Photoshop Elements 5 and Premiere Elements 3.0/3.0.2. Along with that came the perk of the Premiere Elements' Break Apart Elements Organizer Slideshow to do just that for the slideshow that it received from the Photoshop Elements side.
Unless you have additional details that would support us getting to the goal, I think that the path of least resistance might be:
a. if you can open the project.prel in question in Premiere Elements 10, then do so.
b. After you have the slideshow on the Timeline, then use the Split Clip (Scissors Tool) to cut the slideshow at the spots where you want to insert additional pictures. You may have to add back transitions and such.
The Break Apart Elements Organizer Slideshow would have been perfect for you to make your edits of the slideshow in Premiere Elements. But that command is only available in Premiere Elements under certain condition:
a. You must be dealing with integrated combos of the programs, example, 5/3, 6/4, 7/7, 8/8, 9/9, 10/10, 11/11. There are a few loopholes in all that but I do not see them helping us at this time.
b. You would have had to Output the Photoshop Elements to Premiere Elements with the Photoshop Elements Slideshow Editor "Send to Premiere Elements or Edit with Premiere Elements Editor".
Bottom line: if your task is going to involve more than the version 8 combo, then I think it best to try to open the project.prel that you have and break it apart yourself with the Split Clip Tool of Premiere Elements.
And, did you say if this project.prel does open in Premiere Elements 10 without any missing media (Media Offline) messages?
We will be watching for further information and developments. Please let me know if I have misinterpreted any of your information.
Thanks.
ATR -
Does Adobe Photoshop Elements 13 & Premiere Elements 13 run with windows vista please
I have windows vista premium - does it work with it?
No - needs Windows 7 or 8 - see tech specs
Edit picture | Adobe Photoshop Elements 13 - Tech specs
Brian
Maybe you are looking for
-
I'm ready to throw my macbook pro out the window
Hey everyone, i'm a sorta-newbie i've owned apple products (ipods and iphones for years, but this is my first computer from mac, and my first personal computer other than my parents') So i recently bought my very first mac...the mbp 5.3 all nice and
-
How to make a tree with more information in one line
Hi I have seached this forum, and haven't find any information that I can use. I need a tree structure with following informations: arbpl _____aufnr________material_____ text _______extra informations |_____aufnr________material_____ text .......
-
HT2305 iphone 4s not recognized on itunes 11.0.2 for windows 7 x64
having issues with iphone4s and windows 7x64. uninstalled itunes and reinstalled. itunes does not see device. device is recognized by computer as iphone is this a driver issue?
-
1) OS version: OS Name : Windows Server 2008 R2 2) BO version: BusinessObjects XI 3.1 SP05. 3) My question: We have "dbbackup.exe" utility in SqlAnywhere in BI 4.1 for running the transaction log ( CMS and Audit) truncation/backup. But the sa
-
Unicode font issue in oracle 10g Reports
Hi, I have install oracle 10g forms and Reports in windows XP system (c:\DevSuiteHome_1). I have created report for display GUJARATI Language data in PDF. Report is coming but it is displaying junk character instead of GUJARATI data. Plz help me.