Mac 10.9.5 software for laserJet CM2320 FXi MFP

Hi,
       Help!!  is this printer ( laserJet CM2320 FXi MFP )  supported for the Mac 10.9.5 OS? If so, where can I get the drivers and software for this printer, as I can only find the firmware update on the HP Website for this version of the Mac OS.
I have downloaded the software of MAC 10.7, but the Mac won't install this version of the software! 
I have been able to print on the printer, but it prints 1/4 of the text onto a A4 sheet. It seems to think it's set to A3 orA2 when it should be printing to A4.
Also, I can’t use the scanner as it needs the appropriate software.
Will this printer not work with Mac 10.9.5?
Any feedback would be appreciated
Thanks
Siggi

Hi,
The printer is supported on MAC OS X 10.7 and below is the link to download the driver.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3597471&swItemId=t2_100709_1&swEnvOid=411...
Though I am an HP employee, these posts are according to my knowledge and HP is not responsible for it.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

  • Missing device Driver Software for Laserjet Printer M1120 MFP

    Hi, I would like tolocate and install a mising driver device software for my Laserjet M1120 MFP. Any help would be greatly appreciaited.  J

    MartianLizard wrote:
    Hi, I would like tolocate and install a mising driver device software for my Laserjet M1120 MFP. Any help would be greatly appreciaited.  Jhttp://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3447598

  • If I want to put windows7 on my Mac,do I need software for a new comp. or a refurbished?

    If I want to put windows7 on my Mac,do I need software for a new comp. or a refurbished one?

    Mikestoyzz wrote:
    Looking on eBay,the software is labeled for new or refurbished.i'm putting it on through boot camp.
    With my limited knowledge, I don't think that it matters.

  • Manual duplex printing doesn't work for LaserJet 100 color MFP M175a

    Hi !
    OS Windows 8.1. Printer LaserJet 100 color MFP M175a. Driver version 61.108.8.10073 date 2011 Apr 13th
    1. After switching on checkbox "Print on Both Sides (Manually)" on "Finishing" tab of Print Properties Dialog and
    start printing, dialog with instruction how to turn paper appears. Then printer must print odd pages, stop for
    turning paper and then continue printing of even pages on the back side of paper sheets. But my device prints
    all pages sequentually in order 1,2,3,... without any breaks. What is it- my mistake or possible bug in driver ?
    2. Windows API function DeviceCapabilities with fwCapability=DC_DUPLEX for this printer returns 0 (duplex printing
    impossible). This value for any other HP printer, even without automatic duplexer, always equel to 1.
    This question was solved.
    View Solution.

    Hi @Up205, 
    I see by your post that you are having issues manually printing two-sided. I can help you with this.
    The software for this model on Windows 8.1 is the Basic Solution Software and Driver. This basic software solution provides print and scan functionality only. Did you download and install the newest drivers?
    HP LaserJet Pro 100 color MFP M175nw Drivers.
    Check to make sure Bidirectional Support is Enabled.
    Go to the start up screen, (tiles menu) type in "Devices and Printers", select settings, click on Devices and Printers, right click on the printer, left click Printer Properties, on the Ports tab, put a check beside Enable Bidirectional Support.
    You might have to restart the computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Set up for scan to email for Laserjet pro 300 MFP M 375nw

    I am trying to set up a scan to email on my Laserjet pro 300 MFP M 375 and with my IP for my computer, I get as far as filling out the required forms.  All is well until I have to enter a password.  It will be rejected.  I have forgotten the password I initially used.  I would like to know how I can remedy the situation and insert a new password.  NO one seems to be able to help with this problem

    Greetings , I may be able to help you with renaming your scans. Now, I was not able to find any setting that would automatically increase the scan numbers when using the Scan to Email settings. If you use the Scan to Computer option it will number them the way you are describing; Scan0001, Scan0002, ect... That being said, you are able to manually rename the scan file during the Scan to Email process.When you choose Scan then EmailThen choose you outgoing email profileYou should see a Settings button on the bottom left of the display screenScroll through options and select the one that says FilenameEdit the scan file name using the onscreen keyboard Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks, 

  • Help need driver for Mac Yosemite 10.10.2 for LaserJet Pro Color...

      Please help me find the driver for the HP LaserJET COLOR PRO 200 FOR MAC OXC 10.10 YOSEMITE
    This question was solved.
    View Solution.

    This should be what you need
    Driver for for OS X 10.9 Mavericks and OS X 10.10 Yosemite
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-125410-4&cc=us&dlc=en&lc=en...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Maximum Paper Thickness for Laserjet Pro 400 MFP M425dw

    Hi, Does anyone know what is the maximum thickness of paper (in terms of gsm) that can be fed into this printer?  I can't seem to find this specific information in the product specifications. I'm currently using a standard 80gsm but would like to try and print on something a lot more substantial, e.g. 120gsm. Thanks in advance for any help you can offer!

    That's great davidzuts, thanks a lot for your help!

  • 59.9 error for Laserjet pro 200 MFP M276nw

    The 59.9 error occour on my printer. Already follow the instruction to reset and fixed the problem.  Still the error occour.
    Please help me to fix the problem.

    1. Turn the printer off, and then turn the printer on.
    2. Check and reseat the fuser and toner cartridge to make sure they are not hindering gear movement in the drive train.
    3. Check the main motor’s cable to ensure that it is seated properly.
    4. Replace the main motor.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Sync problem with Blackberry Desktop Software for Mac

    Can someone help. I have synchronization problem with my contact in the Outlook for Mac using blackberry desktop software for mac. Seems all details in my blackberry handheld contact got synchronized, but not email addresses (so all names, jobs, companies, work phone, mobile - all got synchronized, but not email addresses). All data is in my handheld. I wish I could just "replace" (not merge/sync) outlook contact with all contact in the handheld but seems there is no option to do that. Let me know please if someone has similar experience and has found out solution. Thanks!

    Can someone help. I have synchronization problem with my contact in the Outlook for Mac using blackberry desktop software for mac. Seems all details in my blackberry handheld contact got synchronized, but not email addresses (so all names, jobs, companies, work phone, mobile - all got synchronized, but not email addresses). All data is in my handheld. I wish I could just "replace" (not merge/sync) outlook contact with all contact in the handheld but seems there is no option to do that. Let me know please if someone has similar experience and has found out solution. Thanks!

  • G thi need to get at least itunes 10.1 for my ipod but it keeps saying that my mac doesnt have the new software for it, what do i do?

    i need to get at least itunes 10.1 for my ipod but it keeps saying that my mac doesnt have the software for it what do i do?

    You need to be running Mac OS X 10.5 or newer to get iTunes 10. This OS version won't run on a G3.
    Mac OS X 10.5 and 10.6 are available on DVD. Mac OS X 10.6 requires an Intel Mac.
    (63519)

  • Installation Software for HP Laserjet P1006 on Mac OS 10.8 Mountain Lion

    I just need installation software for the HP Laserjet P1006 for OS 10.8 Mountain Lion.  The CD which was originally used doesn't work for Mountain Lion.  I have only another HP printer on the network (OfficeJet Pro 8600) and need to reinstall software to make the HP LaserJet P1006 work again.  The original driver software was inadvertently deleted.  I've bee through the Support pages but none address this particular issue.
    This question was solved.
    View Solution.

    Download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Help!  How do I download software for a HP Laserjet Professional P1100? I keep getting the same message when I have downloaded the file "Your security preferences allow installation of only apps from the Mac App Store and identified developers" Help!

    How do I download software for a HP Laserjet Professional P1100? I keep getting the same message when I have downloaded the file "Your security preferences allow installation of only apps from the Mac App Store and identified developers" Help!

    You can change the settings in Security & Privacy to "Anywhere"...
    That should work... as to whether the printer driver will work, that's another question.
    Good luck,
    Clinton

  • Mac OS 10.9 and installati​on for Laserjet 1022n to our networks

    I work for a school district and have purchased new MacBook Pro laptops for all our preschool teachers.  I am trying to set up their laptops to our network printer in their classrooms.....however when I try and use the mac setup.....there is no software for this printer.  I then connected the USB cord to the printer and it downloads the software for desktop version not the network version.  When I try to add the IEP address......it says it can not use the printer because it is already in use.
    I have been struggling with this for two years now.  Possibly I need software to install?
    HELP and thanks so much for your help or any suggestions.....techieQ

    Hi TechieQ,
    On the Apple forum, I found a thread with istructions for a different driver which may help, it's the second post from the bottom. I can't test this out, so post back your results... Hope this helps!
    HP Laserjet 1022 printing on Mac
    Say "thanks" by clicking the Kudos thumbs up!
    Was your question answered? Mark it as an Accepted Solution!
    I work on behalf of HP

  • TS3147 continuous need to update software for HP Laserjet CM1415fnw

    I have a new 27" iMAC and a relatively young 21" iMac.  Both devices tell me there is new software for my HP Laserjet CM1415fnw printer every time I check for software updates.  In fact, I can update the software immediately after just having updated the software.  The printer and Macs are attached to a LAN.  Any tips?

    Delete the /Library/Printers/hp folder and reinstall the update - it should be okay after that.
    Hope this helps.

  • Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

    I recently upgraded to Mountain Lion, and found that I could no longer print to  my HP CM1312nfi.
    This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
    My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
    When I try to download the driver by bonjour or IP, I get the following error message:
    Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
    Is this truly a Software Update server error, and if so, any clue when it will be resolved?
    I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog  lists no devices.
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
    Thanks for your time and attention.

    Of course, once I posted this, I tried again and downloaded the driver without issue.
    My second question still stands, however:
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

Maybe you are looking for