Mac 512kE Keyboard and Mouse

Does anyone know where I can get the keyboard and mouse for my old 512kE? Thanks

Hi, Old Macs -
As you might have guessed, there's only the second-hand market available to you for such equipment. eBay is a pretty reliable source for the mice, but keyboards are a little harder to come by. Other outlets include your local craigslist or freecycle, and the Low End Mac swap list: http://lowendmac.com/lists/swap.html

Similar Messages

  • Mac wireless keyboard and mouse question

    I have a Mac wireless keyboard and mouse.  Can they be used with any computer other than an Apple product?              

    Yes.   Equally, you can use any other mouse with an Apple computer.  Having said that, there may be the odd exception but it would be an exception.

  • Yosemite update to Mac pro keyboard and mouse not working anymore

    Updated to Yosemite on my Mac pro, worked perfect for about 2 weeks then my keyboard and mouse stopped responding, both keyboard and mouse were replaced and still won't work. The computer turns on but won't respond to the USB mouse &Keyboard. Help

    I have seen 2 out of the 6 mac pro's in my office do this. I am about to go to the apple store to show them.
    When the computer is doing this I have tried using every wired apple keyboard in my office and none of them work. If I try the same keyboards on a windows computer or my macbook they work fine. If I use any non apple usb keyboard they work fine. My problem is if I turn the computer off for a few hours the usb apple keyboard works again so when the computer has been off all night and I pack it up to take it to applecare it is working by the time I get into the store.
    I think there is a small flaw in usb port on the mac pro or the apple keyboard that when heated up from use stops the pins from contacting completely. It might be a manufacturing defect and it might be an unintended problem caused by how apple slightly modifies their USB ports.

  • My Mac wireless keyboard and mouse won't reconnect

    My Mac wireless keyboard and and mouse one day disconnected and I can't  reconnect. They have new batteries.

    Hi Saint Anne,
    Happy Thanksgiving Day!  Since both of your wireless input devices are not working at the moment, do you have a wired mouse you can use to straighten this out?  Here are some troubleshooting steps to try:
    Wireless Connection issue
    Make sure Bluetooth is turned on
    First, choose Apple () menu > System Preferences > Bluetooth and confirm that Bluetooth is turned ON.
    The Bluetooth menu bar icon should turn:
    Black if Bluetooth is turned ON and no devices are connected.
    Light grey with three dots if Bluetooth is ON and at least one wireless device is connected.
    Light grey (or disappear completely) if Bluetooth is turned OFF, or if the iMac is unable to communicate with the Bluetooth module.
    Refer to the Bluetooth Menu Icon table below for more information on determining the Bluetooth status. If the Bluetooth icon does not appear, or if the menu bar status continues to indicate that Bluetooth is off, restart your computer and then attempt to turn Bluetooth ON again.
    Bluetooth OFF
    Bluetooth ON and connected to wireless device
    Bluetooth menu icon
    Bluetooth status
    Bluetooth turned on, but there are no devices connected to the Mac. See the "Make sure the wireless mouse or keyboard is turned on" section of this article.
    Bluetooth turned on and at least one wireless device is connected.  See the "Make sure the wireless mouse or keyboard is turned on" section of this article.
    When this icon flashes, at least one wireless device has a low battery. Click the Bluetooth icon to identify the affected device, then replace the batteries.
    Bluetooth is off. Click the Bluetooth icon using a USB mouse and select "Turn Bluetooth On". Note: Mac OS X won’t allow Bluetooth to be turned off unless a USB mouse is connected.
    Bluetooth offline. Restart your Mac. If the Bluetooth status doesn’t change, disconnect all USB devices and restart your Mac again.
    Make sure the wireless mouse and keyboard are turned on.
    Mouse
    Slide the On/Off switch on the bottom of your mouse to turn it on. Note: If the battery compartment cover is not installed properly the On/Off switch may not function correctly or may be difficult to operate. Remove the battery compartment cover and carefully reinstall it.
    When your mouse is on and paired, and the batteries are charged, the indicator light glows steadily.
    If your mouse isn’t paired with a Mac, the indicator light will blink, indicating your mouse is in discovery mode and ready to pair.
    If the indicator light doesn't illuminate, check to make sure you have two good batteries and that they're installed correctly. 
    Keyboard
    Push and release the On/Off switch to turn on the Apple Wireless Keyboard.
    When your keyboard is on and paired, and the batteries are charged, the light will glow steadily for several seconds, then turn off.
    If your wireless keyboard isn’t paired with your Mac, the indicator light will begin to blink. This indicates your keyboard is in discovery mode and ready to pair with your Mac.
    If the LED doesn't light up, remove the batteries to make sure they're good and that they're installed correctly. 
    Check preferences
    From the Apple () menu, choose System Preferences, then choose Bluetooth from the View menu. The Bluetooth preferences pane will list the Bluetooth devices paired with the computer, the status of the devices (paired or connected), and whether Bluetooth power is on or not.
    Click the gear icon and choose "Connect" to connect a device that is powered on.
    To set up a new device, click the + icon and follow the Bluetooth setup assistant.
    If the Mouse System Preferences pane is open and no wired or wireless mouse is connected, your Mac will immediately start looking for a wireless mouse (with Mac OS X v10.6.  For Mac OS X v10.5, the Setup Assistant should open).
    Keyboard or mouse intermittently stops responding
    Click the mouse
    Click the mouse once to reconnect it with your Mac. It may take a moment for the mouse to respond.
    Check the battery level of the mouse. Choose System Preferences from the Apple (), then choose Mouse from the View menu. The battery level indicator is in the lower-left corner. Replace the batteries if they are low.  Note: Choose Keyboard & Mouse from the View menu with Mac OS X v10.5.  For more information on keyboard and mouse battery levels in Mac OS X v10.5, see Desktop computers: Troubleshooting wireless keyboard and mouse issues.
    Press a key on the keyboard 
    Press a key on the keyboard to reconnect it with your Mac. It may take a moment for the keyboard to respond.
    Check the battery level of the keyboard. Choose System Preferences from the Apple (),  then choose Keyboard from the View menu and select the Keyboard tab. The battery level indicator is in the lower-left corner. Replace the batteries if they are low.
    Check for signal interference
    Wireless networks that operate on 2.4GHz may cause interference.
    Move cordless phone base stations, microwave ovens, and other 2.4GHz electrical devices away from the Mac if you suspect interference.
    Keep wireless devices within 10 meters (33 feet) of the Mac.
    Avoid putting metal objects between the device and the Mac.
    Mouse doesn't scroll up or down or side to side
    For mice that have a scroll ball, refer to How to clean your Mighty Mouse.
    Check the Scrolling speed slide-control at the top, and make sure the “Scroll” checkbox is checked.
    For scrolling side-to-side, make sure the application you’re using supports side-to-side scrolling.
    Remember, scrolling is done with one finger, and navigating is done by swiping side-to-side with two fingers.
    Navigating moves from page to page in a document or internet browser unlike scrolling.
    Mouse does not track as expected (jittery, jumpy, slow, fast).
    The Apple Wireless Mouse can be used on most smooth surfaces, however if tracking issues occur try these options:
    Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
    Try using a different surface to see if the tracking improves.
    Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
    If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
    Mouse buttons do not work as expected.
    The Mouse preference pane allows users to customize the mouse features to meet their needs.
    Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
    Try using a different surface to see if the tracking improves.
    Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
    If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
    Keyboard has one or more keys that do not respond. 
    Use the Keyboard Viewer to test whether the keyboard keys are responding correctly when they are pressed.
    Choose System Preferences from the Apple () menu, then choose Language & Textfrom the View menu (or International from the View menu in Mac OS X v10.5 or earlier).
    Select Input Sources.
    Select the Keyboard & Character Viewer checkbox.
    Enable the input source for the keyboard layout you are testing by selecting the checkbox next to it.
    Make sure that "Show Input menu in menu bar" is enabled.
    Choose Show Keyboard Viewer from the Input menu in the menu bar, as shown.  
    The Keyboard Viewer shows the keyboard layout.
    Type the key on the keyboard that doesn’t respond and observe whether the corresponding key highlights on the Keyboard Viewer. If it does, that particular key is functioning correctly. In the sample shown above the shift and command keys are being pressed.
    If the mouse keys feature in the Universal Access System Preferences pane is enabled, many of the keyboard keys may not respond as expected.
    Try starting up into single user mode to determine whether a software issue is causing the issue.
    Cheers,
    Judy

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • Want Mac mini and G4 to share Display and USB keyboard and mouse

    I bought a KVM switch at a local electronics store. I got the only one that claimed Mac compatibility (PPA Int'l). I can't plug the switch into the G4 Cube. No such ports. With the adapter that accompanied my brand new Mac Mini, I can plug the KVM monitor port into the mini's monitor port, BUT that port is currently being used by the Apple DVI-to-ADC adapter I bought so I can connect my Cinema Display to the Mac mini.
    The KVM switch wants 3 ports on each computer: a VGA (monitor) port, the keyboard port, and the mouse port; but the keyboard/mouse connectors are not USB.
    As things stand--without the switch--I can shut down whatever computer I'm working on (mini or Cube), unplug the display from one, connect it to the other, power up and everything's fine. I suppose the only advantage with the KVM switch is being able to power off, switch, then power on without having to move the display plug.
    My QUESTION is, does anybody manufacture a KVM switch I can use between two Macintosh computers to share use of my USB keyboard powered from a USB port on the display, and my USB mouse powered from a USB port on the keyboard?
    Or is the answer NOT to go for the convenience of a KVM switch?
    Does it matter that the mini OS is Leopard, and the Cube OS is Tiger?
    I am heartily impressed with the mini. Setup was over in 5 minutes, and I must say it's fast. Appreciate any help from the experts. --Spot

    I had the same problem, and finally came up with two other alternative solutions.
    First, if you have a recent LCD monitor, it is fairly simple and cheap. The Mini has a digital connection for the monitor. My G4 400 MHz has both digital and analog connections. I have a Samsung 19 inch widescreen monitor that has both a digital and an analog input. I connected the G4 to the monitor using the analog input with my old cable, and connected the Mini using the digital input. The Samsung has a switch that will use either the digital or analog input - very easy.
    Now the keyboard and mouse. I got a 6 foot USB cable with the A plug on one end and B plug on the other, plugged the A plug end into the G4, and ran the cable with the B plug up near the Mini. It helps to keep it close. You already have the keyboard/mouse plugged into the Mini. You simply unplug the keyboard cable from the Mini, and plug it into the B plug from the G4. Switch the monitor from digital to analog, and you have the G4 (remember to start it up). Once you have run the cables, it takes about 10 seconds to make the switch.
    Second, and I use both ways, is to get an inexpensive wired router. I bought a Belkin 4 port router (about $30, I think), got a couple Cat 5 cables, hooked both the Mini and G4 up to the router, along with my internet connection, and have both computers available on one monitor with no physical switching involved. You will need to go to System Preferences/Sharing and turn on Personal File Sharing (there may be another change, but I can't remember it right now).
    When all is hooked up, you go to GO in the Finder Menu Bar (make sure the G4 is booted before doing this) click on either NETWORK or CONNECT TO SERVER, find your G4 and connect. It may be confusing the first few times, but it works great because you have access to both computers at once, along with your internet connection - the best of both worlds!
    I did this in January of this year, so please forgive me if I have forgotten a step somewhere. Ask me and I'll be glad to try to walk you through it. The first solution is the simplest to do, and the second in the most versatile. It's your choice.
    Hope this helps. Just don't be intimidated by it - if I can figure it out, we can get you connected. Good luck!

  • I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station.

    I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit.  Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

    Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

    Hello, Serial# not needed...
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto *but not including the Serial#*...
    Hardware Overview:
    Machine Name: Power Mac G5 Quad
    Machine Model: PowerMac11,2
    CPU Type: PowerPC G5 (1.1)
    Number Of CPUs: 4
    CPU Speed: 2.5 GHz
    L2 Cache (per CPU): 1 MB
    Memory: 10 GB
    Bus Speed: 1.25 GHz
    Boot ROM Version: 5.2.7f1

  • Using a PowerPc G5 and Mac Mini with the same display, keyboard and mouse

    I have a G5 PowerPC and a new Mac Mini. I wanted a good KVM switch so that I can use the same display, keyboard and mouse with both machines. Any suggestions?

    IOGear, Trendware and Startech.
    I'd stick with IOGear.

  • Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive tha downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it?

    Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
    What else would I need? Please advise...

    Yes for keyboard and mouse.
    The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
    http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3

  • My new mac mini doesn't detect my wireless keyboard and mouse from logitech

    I recently bought the Logitech MK550 wireless keyboard and mouse combo for my late 2014 Mac mini.  Basic functions work, however, when I try to add the keyboard and mouse in the System Preferences it can't find either one.  So right now I have this great big keyboard that I can only use about half it's full functionality and an unassigned button on the mouse.  Any ideas?  Also, I would like to add an apple remote to my mini.  I have one from my old iMac.  Is this possible?

    Try resetting the SMC.
    Question #2 - I have no idea.
    Barry

  • Mac Mini and Bluetooth Keyboard and Mouse

    I have a Mac Mini as a server. I've decided to do a clean install of Mountain Lion and Mountain Lion Server. I don't have any wired keyboard or mouse and am having trouble getting the Mac Mini to see the keyboard and mouse. I can buy cheap wired ones but I'd like to use my bluetooth ones if at all possible. Can anyone offer some tips for doing this successfully? I need a method that assumes I have a Mac Mini with a clean, formated disk and a bootable flash drive with the latest copy of Mac OS X Mountain Lion.

    I did unpair the mouse. The keyboard has only ever beenpaired with the Mac Mini. Today I was finally able to get both devices talking with the Mac Mini, but I really don't know how I did this. I just played with turning them on and off. If the Mac Mini has been newly formatted (as I finally managed to you), is the pairing information retained?
    I'm thinking there is more to this issue than just bluetooth pairing.
    Thanks for your quick reply. (I'm still redownloading Mountain Lion from the Apple store and making a new bootable flash drive as the one I had won't let me install. Not sure why.)
    (If the issue is just one of pairing it would appear I don't need a wired mouse and keyboard.)

  • Is the Microsoft 5MH-00001 Wired Desktop 400 keyboard and mouse compatible with mac mini?

    Hello, is the Microsoft 5MH-00001 Wired Desktop 400 for Business mouse and keyboard compatible with the mac mini computer? I tried using a generic mouse and the lights of the mouse were on, but I could not click or move the mouse around. Then when I plugged in a dell keyboard, it said the "keyboard is not identified". I could press buttons on the keyboard, but they werent being registered by the mac. I also tried changing my mouse's usb to a different port, but still did not work. So I am worried that the microsoft wired mouse + keyboard I ordered might not work on my mac mini. Is there a way to get my old keyboard and mouse to work at least?

    Were these other ones you tried Wired also? If so that's really strange!?
    Did you try rebooting with them connected?
    I see no reason for the Microsoft 5MH-00001 Wired Desktop 400 for Business to not work, but then any wired Generic KB should work!???

  • HT5539 how do i pair my wireless keyboard and mouse to a new mac mini

    how do i pair my wireless keyboard and mouse to a new mac mini

    First you have to unpair them from their previous devices.
    Troubleshooting wireless mouse and keyboard issues

  • Apple TV in Living Room and Airplay from Mac Mini .. what about Keyboard and Mouse?

    Now I know that you can air play the mac mini to the apple tv, but before I go out and buy an apple tv I want to know something. My living room is a little away from the room where the mac mini is, how can I have the keyboard / mouse work with the apple tv to wirelessly control it? Do I have to buy an additional keyboard / mouse? Some people have mentioned the remote somehow works, but I need the keyboard and mouse to work, any tips from the pros?

    I'm not a huge fan of Airplay Mirroring - what do you intend to use it for?
    How old is your Mini and is it able to Mirror?
    You need:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    Mac Pro (Late 2013)
    http://support.apple.com/kb/ht5404
    If you don't meet the specs try AirParrot software.

Maybe you are looking for

  • Create Sound Spectrum in AS3

    I'm trying to create a spectrum display for microphone input/playback in ActionScript 3 but can't seem to get it to work. I understand that the SoundMixer class does not control dynamically created Sound objects, but surely there is a way around this

  • How can I get Win 7 to recognize my iPod again?

    Hi, everytime I plugged in my iPod, windows would want to scan it for errors. This became very annoying, because if I did not click no on the dialog box, itunes wouldn't sync with it. So I did something stupid. I went into disk management and removed

  • BOM Issue

    Hi all, Scenario: One Purchase order is created with a BOM material consisting of 3 components. For ex. Material X contains sub items as A, B,C. in one company code say IHK Now based on this purchase order, a Sales Oder is created for the Material X

  • Indesign with CALS table

    Hi all, We are in process of automating XML indesign workflow. We need some input reg. the table handling in XML workflow. Which type of table is good CALS or Indesign Table. kavya

  • Display Aggregated  numbers for all the weeks – Need immediate help

    Requirement is , Get the case count (#of Cases), and Case Worked (" #of worked Case") and Number of Solution ("# of Solutioin") for the next 5 weeks base on selected week Case detail has in "Case Fact", Worked details has in " Activity fact", Solutio