Mac address and Serial Number

Hello all,
my Macbook pro was robbed last weekend, i wanna know if is possible to get the MAC Address of my Macbook if i have the serial number, i wanna try to locate my Mac by that way, but i dont have the mac address, just keep with me the serial number of...
Thanks all.

OK, I know that.
I'm in Chile, and I have contacts on a local ISP, they use for all its connections a relation between MAC address and modems, any other computer can't use that connection if that association is not changed.
My hope is that my Macbook will be use with that ISP, for that the thief would have to give the MAC Address ... so I can get the bad boy name...

Similar Messages

  • I have multiple AppleTV's at different locations.  Is it possible to determine which specific AppleTV purchased a movie, by tracking some type of physical device ID (similar to a hard coded MAC address or serial number)?

    I have multiple AppleTV's at different locations.  Is it possible to determine which specific AppleTV purchased a movie, by tracking some type of physical device ID (similar to a hard coded MAC address or serial number)?

    Mullaly75 wrote:
    I assume u guys don't understand what open source software is
    Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
    Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
    Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
    from http://en.wikipedia.org/wiki/Open_source_software
    Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

  • MAC Address from Serial Number

    An Auditor at our company wants us to find and identify one of the C3750 switches on our network.  The only information he has available is a SLA with the serial number on it.  Is there a way someone at CIsco can provide me the MAC address if i give them the Serial Number?

    If you have the MAC address and the appliance is on-line, why don't you track down the appliance from the network?

  • Finding MAC address by serial number

    hi, my macbook pro (mid 2012 ) model got stolen...Now i don't have the MAC address to trace that... all i have is a serial number...is there a way to get the MAC address through the serial number of the macbook pro.....Thanks.

    You don't.
    You can find the MAC address in Settings>General>About.

  • Determine LAN MAC-address knowing only the model and serial number

    Laptop Toshiba SN 96592614G
    Is it possible to determine the MAC-address of the network card, knowing only the model and serial number of your laptop?
    How to refer the matter to the addicts Toshiba.

    Knowing the serial number you can check the notebooks details here:
    www.toshiba-tro.de/unitdetails
    but there are no informations about the mac adress... maybe an Toshiba authorized service provider woudl be able to provide an info about that ...

  • Can I download Adobe Creative Suite 5.5 Design Premium on a new Mac if I've had it installed on my old one since December 2011? I have the product key and serial number.

    I bought a new Macbook Pro 13 inch in December 2011 and I bought the Adobe Creative Suite 5.5 Design Premium shortly after and installed it on the computer.  The other day my friend spilled his drink on my computer and it is now going to cost me $800 to get it fixed so I am considering getting a new one instead of getting mine fixed I'm not sure if the memory is still ok or not either.  It didn't get that wet and Apple told me it is more than likely ok but there is no guarantee that they are going to keep the memory when they fix it.  So I was wondering if I get a new one if I can install the Suite on the new one I still have the product key and serial number for the Suite.  Or if I decide to get mine fixed and the memory is swept, then can I reinstall it on mine after it is fixed?  If anyone can help me it would be greatly appreciated!!! Thank You

    deactivate your installation on your old computer (help>deactivate).
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

    In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

    Here is a copy of the error
    This means : Installation failed.
    Verification of the Adobe Software failed
    The product you want to install is no valid Adobe product and seems to be falsified.
    HUgo
    Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
    I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Hugo please turn off your e-mail signature.
    If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files.  You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    To download a fresh copy of the installation files please see Download CS6 products.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My hard drive went out one of my Macs and I am trying to install logic studio on another Mac but the serial number is invalid. What are my options?

    My hard drive went out one of my Macs and I am trying to install logic studio on another Mac but the serial number is invalid. What are my options?

    Check that the serial you are using is the correct one..
    Typically the problem is either you are misreading the serial and therefore typing it in wrong. Check you are correctly entering zeros or O.. and so on....
    or...
    You bought the LP9 upgrade version.... which requires the LP8 full serial as well.
    If it is the LP9 upgrade serial.. (and not the LP9 full serial) you must enter your original LP8 full serial first and then the upgrade serial for LP9.. when it asks for it.
    Failing that.. you can obtain a replacement serial from Apple.. using this form.....
    https://ssl.apple.com/support/proapps/serialnumbers/

  • I have LR4.  My Mac crashed.  I bought a new mac, used my LR4 cd and Serial number to install on new mac and i lost all my presets.  please help

    i have LR4 on my mac book pro.  The macbook pro crashed so I bought a new mac.  When I used my LR4 cd and serial number on new mac I lost all my presets.  please help

    Repair the Hard Drive - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported.
    Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Destination means the internal drive. Source means the external startup drive.

  • MAC address and the CAM entries on the Layer 3 FWSM(Transparent mode)

    Hi,
    With refrence of Cisco Secure Firewall Services Module (FWSM) of Cisco Press book it's mentioned that
    "While configuring the transparent mode in FWSM, it is important to specify the MAC address and the CAM entries on the Layer 3 next hop device of FWSM."
    This part of configuration is not very much clear to me please let me know the logic of this things
    The following are two examples:
    Layer 3 Device A (PFC) at the Outside Security Domain
    ! IP address of the next hop for the outside security domain
    interface Vlan20
    mac-address 0000.0000.0001
    ip address 10.10.1.1 255.255.255.0
    ! Specify the IP address and MAC address at the first hop layer 3 interface
    ! of the inside security domain
    arp 10.10.1.21 0000.0000.0001 ARPA
    Layer 3 Device B at the Inside Security Domain
    ! IP address of the next hop for the inside security domain
    interface Vlan21
    mac-address 0000.0000.0021
    ip address 10.10.1.21 255.255.255.0
    ! Specify the IP address and MAC address defined at the first hop interface
    ! of the outside security domain
    arp 10.10.1.21 0000.0000.0002 ARPA
    Regards
    Chris

    Check the serial # reported by Sys Info against the serial # printed on the bottom of the case. I bet they are not the same. The service center did not change the serial # on that new Logic board to match the REAL serial number of your Mac.
    So when you try to go to the MAS it looks like a completely different Mac which is not registered under your Apple ID.
    If the above is true, the serials being different, then you need to take it back and have that changed to your REAL serial number.

  • I have had  adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

    I have had  adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

    uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    for the installation file(s):
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How can I track my mac with a serial number

    How do I track my mac with a serial number.  My computer was stolen and the find my mac wasn't enabled?

    You can't.
    What To Do If Your iDevice or Computer Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Mac Computer
           Find My Mac can be used from Find My Phone at iCloud.com and via Find
           My Phone on your iDevice.
          The following is third-party anti-theft software:
               1.  STEM 2.1
               2.  MacPhoneHome 3.5
               3.  MacTrack 7.5.0
               4.  VUWER 1.7
               5.  Sneaky Bastar* 0.2.0
               6.  Undercover 5.1.1
               7.  LoJack for Laptops
               8. Hidden 2.0
               9. Prey 0.6.2

  • Aperture keeps asking for my name and serial number

    Aperture keeps asking for my name and serial number, but only on one of my Macs. This is a new Mac that I restored from my old Mac. It made sense to have to put in the documentation the first time, but the program keeps asking for it. Any thoughts?

    Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise the serial number cannot be stored.
    Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library; this requires read/write access for administrators. Do you enter your serial number using an administrator account?
    SInce you migrated your system from another mac, you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
    To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppsSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see ProAppsSystemID there, move it to its proper location in /Library/Application Support/ProApps.
    Aperture must be running, and you will have to wait a few minutes to be seeing the file appearing the /tmp directory.
    Regards
    Léonie

  • HELP.i lost my iphone 4s  in BANGLADESH. i have imei  number  and serial number. how  find my device  .

    Help.I  lost  my iphone 4s  in Bangladesh.I have imei number and serial number .how find my iphone 4s?

    Unless you have Find My Phone activated, you cannot find it.
    What To Do If Your iDevice Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Reports for Apple devices with SCCM client - Mac Addresses and IP information.

    Greetings.
    I've been having an interesting problem.
    I am currently running SCCM 2012R2 with PKI and have clients installed on windows, linux (ubuntu mostly) and apple computers successfully.
    I have created custom report proving me with hardware information for windows and linux machines (Serial numbers, manufacturer, Mac Addresses and IP addresses) successfully.
    So far I wasn't able to create any report or even find what table information about Apple computers MAC and IP addresses is stored.
    If i go to Apple computer in SCCM using resource explorer under hardware I can see network devices, so that information is definitely gathered by SCCM in some way.
    Can anyone help me out with this and maybe I am doing this in a wrong way?

    Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
    So when I try to get them as substring i get multiple copies of same mac address.
    But looks like this will work as solution to this problem.
    So far I was doing it this way (And i am sure there is clearer way to do it.)
    SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
                FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM  v_GS_NETWORK_ADAPTER) t2
                WHERE t2.ResourceID = ResourceID
                ORDER BY t2.ResourceID, t2.MACAddress0
                FOR XML PATH ('')
            ), 2, 100) [MACAddresses]

Maybe you are looking for

  • Frustrated with Apple Service and Apple Store... Lemon Law?

    Hello, I'm wondering if anyone has had an experience like this before, and if so, how they resolved it? Also, does anyone have any sort of customer service phone number (not tech support), where I could reach a supervisor, or someone who deals with i

  • Can I set multiple events at the same time to repeat on iCal?

    I know I can do this by manually selecting each one of them and setting it to repeat. But it's a pain and it doesn't make sense not to be able to edit more than one event at the same time. When I want to set up my weekly schedule I do it for one week

  • Invoking Xai Service from  BPEL process (Error 411--Length Required)

    Hi Friends, I am trying to invoke xai inbound service webserive i.e WSDL from BPEL process, when i am testing the request i am getting the following error oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocatio

  • Transaction type for Account Determination

    This doubt in STO scenario: STO - between 2 plants - different company codes under same client Created STO from Receiving Plant in ME21N with document type NB Based on that STO, Created Delivery in VL10B from supplying Plant Tried PGI in VL02N from s

  • New Dialog Instance Installation PXA_NO_SHARED_MEMORY Error

    Hi friends, I am  running SAP ECC 6.0 on HP_UX 11iv2 and oracle10g. Central instance and database installed on different servers. I have two other dialog instances running but I have installed another dialog instance as restore from other existing di