Mac-Address Different format for Authorization on Cisco ISE

Dear All,
I have problem with my Cisco ISE,
This is the design :
ISE ---- Core Switch ---- 3Com Switch --- PC User
My Case:
Authorization is based on Mac-address and Active Directory,
But user with PC that connect to 3Com swtich is Deny by ISE because the Format Mac-address is different with Cisco,
Mac-address Cisco format : XX:XX:XX:XX:XX:XX
Mac-address 3Com format : XXXX-XXXX-XXXX
3Com Switch type is TRICOM 4210 26-PORT.
Anyone have experience with this? and how change the mac-address format in 3Com so user can authorized by Cisco ISE.
note:
authorization based on Active Directory is not problem with 3Com Switch.
Based on my experience, Different product is different format mac-address, so this case not only for 3Com Switch.
Thanks,
Arika Wahyono

I do not think Cisco will add these vendors to the supported switch matrix because then it would be a support issue that cisco would have to deal with, much like most of the AD issues I experienced when I worked in TAC. Your best bet would be to run the evaluation license instance in a lab and have a 3com switch point against that.
Other than that I do not recommend upgrading to 1.2 without validating that the new "multi-vendor" MAB support will work on your switch.
PS- Keep in mind that my comments is just my opinion so you may need to open a TAC case for an official answer.
Tarik Admani
*Please rate helpful posts*

Similar Messages

Different formats for each line in enums & rings?

I don't know if this one is possible but I can't figure it out.
Can you make an enum or ring control have a different format for each selection?
E.G.:
Selection 1 [default]
Selection 2 [test mode]
Selection 3 [optional]
Selection 4 [optional]
I've tried the formatting options and property nodes, no luck. Maybe there are possibilities with control customizing I'm not thinking of???
Thanks & Regards,
K
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Hi K.
I don't think it's possible to have those text properties vary in a text-ring, but you might be able to accomplish your goal using a pict-ring - using images of formatted text. In the example (attached) Paint was used to create the pictures then import them into the pict-ring. Here Unclebump shows how to use "Draw Text at Point.vi" to create formatted text in a picture control, though, I have no idea how to copy such pictures out of the pictures control!
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
FormattedTextPicRing.vi ‏14 KB

Re: Different format for email PO

We are currently sending PO as PDF to vendors.
Some vendors are requesting that we send the data in text format to them.
we are sending PO thru INT (communication type).
However, it is linked to PDF format for internet under "Supported Address type".
Do i use back the same node to send and yet under different format?
OR do i need to configure another node under SCOT?

Hi colin,
You have to config in 'scot'
Basic settins required to config
1. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on).
The system only uses the e-mail address of the vendor that is maintained in the vendor master!
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type NEU (for example, Transaction MN04), use medium '5' (External send). Then in Transaction M/34 for the output type NEU add the medium '5' (External send) in Partner functions & Processing routines.
6.Then Create a POGo to Messages>select the output type & medium '5' (External send). Then communication method > Comm Strategy CS01. Remoce Print immediately if it is ticked.
7. Then go back ,Select message>Further data>Dispatch time>Select 'Send immediately (when saving application)'
Back and save PO.
8. Check SCOT. PO will be in the waiting list. If u want to see the detailed list of waiting items then go to transaction SOST. Specify the Send date, select the check box Waiting & execute.
In t.code SCOT you can set the format conversions by using menu path SETTINGS --> CONVERSIONS and specifying that your sapscript out put (I think SCR) should convert to PDF and then put in the appropriate Function module (try SX_OBJECT_CONVERT_SCR_PDF).
You also have to allow PDF in the EXCHG node setup
If you want further details Please check the SAP note 191470.
regards,
Hareesha

Understanding Mac OS Extended format for DVD media

I am typically burn my files and folders on the Desktop. The reason I do this is that I hope the files will be readable on both a Mac and a PC. They seem to be do that just fine. But it was not until today that I noticed that these DVD's end up being formatted as "Mac OS Extended" even though Windows XP with Service Pack 3 can read them just fine. But I also have an older DVD that was burned the same way and also says it is formatted in the "Mac OS Extended" format. But that DVD is not readable on my PC even though it is readable on my Macbook. I am trying to understand if something changed in the Mac operating system that changed with this format. I am also trying to understand the Mac OS Extended format and primarily what is the BEST way to burn a DVD that works on a PC and a Mac.
Thank you for any help you might be able to offer.
Garry

On the Mac, it says the format of the DVD is Mac OS Extended but when you run it on WIndows XP with SP3, it says the DVD is formatted as UDF (Universal Disc Format) which I think is interesting because I burned several DVD's on my PC in the UDF format version 2.5, which is the latest, but the Mac OS could not read them. So it must be an older version of UDF Apple is using or some type of custom format that Apple uses.

MAC Address Vendor Codes for Apple?

Does anyone know if there's a current list of MAC address vendor codes that have been assigned to Apple? I've found a few by searching but I'm not sure how recent they are.

Go to this page and browse or search the OUI listing for Apple.
(13628)

LR Win to Mac - external HDDs formatted for NTFS not Mac, best solution?

Just moved from windows to Mac and moved the catalogue over. I save all my photos on two backup external HDDs to keep my computer empty but they are formatted for NTFS for Windows which a Mac does not support writing to. So while I can read the files from the catalogue on LR I can't move any new files to them.
Has anyone else found a workaround or do I need to reformat my HDDs for Mac format?
Thanks in advance.

An internet search will turn up lotsa info about this.
Here is just one of many articles on the subject:
NTFS Write support on Mavericks | Apple Support Communities

WRT160N mac address to use for dhcp reservation

I have to reserve this one router's MAC address in the main router for the building. Both routers in question are WRT160Ns. The router I have to reserve's MAC address ends in 5A (on the bottom of the router, and in the ARP table when connected via wifi), but it's 5B that is listed in the DHCP resrvation table for the main router. Why is this? What should I do? I am trying to reserve it in order to keep the nettalk voIP adaptor connected to the network.

How about if you access the setup page of the 2nd router then go to the status and check the local mac address under the local network subtab. From there you will be able to compare if you have the right mac address.

Getting the ipod to work on a Mac after being formated for a PC

I just received a 60g video ipod for christmas. I ran it first on my parents PC. It worked great. I was able to copy songs and even use the ipod as a portable HD. Then I took it home, plugged it into my PowerPC G4 and nothing happend. It wouldn't show up in itunes, or on my desktop. Then I used the ipod updater from 11-17. It wouldn't recognize my ipod being plugged in. I then went into itunes prefrences and it said "no ipod connected" and when i try to run itunes with the ipod connected itunes just freezes until i unplug it.
I have a PCI slot USB 2.0 that i plugged it into. (i even tried the 1.0 just to see if it would at least read) I tried everything. I know it should be able to at least read the ipod even if it's formated for the PC. but it doesn't. The weird part is the ipod says "Do not disconnect" when i plug it into the machine. So the ipod is reading the usb cable.
i later took it to my friends, house who has a PC, and was able to format the ipod. but when i brought it back home it still won't work. i am sooo frustrated right now. i don't know what to do except throw this thing against the wall. any help would be greatly appreciated. thanks.
Dual 1 GHz PowerPC G4 Mac OS X (10.3.9)

I tried replying to this message earlier but it never appeared. Thats probably a good thing since I think I finally found a solution.
I was having the exact same problem as kriutta (pc to mac, powermac g4, pci usb 2.0 card).
Since my Mac wouldn't let me format the iPod, I took it to the Apple Store and had one of the techs there format it on a new Mac in the store. I brought it home and this allowed iTunes to see the iPod.
I still had another problem that I couldn't format the iPod using the iPod Updater, the icon for the iPod was for my old 3G iPod and iTunes wouldn't let me transfer photos or videos (no tabs in preferences).
To fix these problems I deleted /System/Library/Extensions/iPodDriver.kext and replaced it with the newest version from the iTunes 6.0.3 package. I then ran disk utility to fix permissions and rebooted. It worked!
iPod Updater works, iTunes shows the right 5G icon, I can transfer my videos and it's right now transfering my Photos.
One last thing....some of those PCI USB 2.0 cards are crap. I've heard that the Belkin one works the best but a lot of them aren't supported by Apple's USB drivers (even though they say they're Mac compatible). So be careful that the USB 2.0 card you're using is a good one.
I hope this helps.

Formatting a currency in different format for 2 company codes

Hi,
I have two company codes(MCFL and MIL) in Indian project, now my requirement is to maintain different currency format which means company code specific.
In PO print I wanted to show as different format.
Is it possible to do setting in customizing level.
Regards,
Vadamalai A

Hi,
   You can set the decimal notation format at user level. Go to Su3 - Defaults tab and maintain the format at user level.
    If you want different format in printout, then you need to put the logic in the smartform only, to validate the country and pout the corresponding format.
    Revert back if your question is different.
Regards,
AKPT

Problem in using different format for Image files

We are generating a report wherein the logo (Image File) is changed with respect to the company's location.
Here, we are making use of a Text field using a formula column as its source for getting the file path.
When the Size is kept as "Expand" or "Variable", then, when the image size changes considerably, it gives problem, wherein the logo is not displayed.
Then we increased the size of the logo field and kept thte size type as Fixed. But the probnlem which we face is because of the .bmp format which the report accepts.
This is because, when the format type is bmp, upon increasing the resolution or size of the bmp increases the size by several folds( say from 70kb to almost 1000 or 1500kb) which leads to the error "Memory cannot be read" and leads to abrupt application termination.
Is their any way by which i can make use of GIF format for the image file and at the same time change the file name at runtime.
Eagarly waiting for an early solution.
Thanking you in Advance,
Ramnath Balasubramanian

Hi,
You can only use one Apple ID with iTunes match. Purchasing another match subscription using wife's Apple ID is not a solution. I can only suggest that you use your ID for match and all iTunes music purchases.
Jim

Can i make (for example) 3 partitions on my external Hard Drive, and make different formatations for each, so i can share files of one of them in a pc and mac?

Hello ...
My name is Rui, i'm from Portugal ... (so please be patiente with my english, it can get a bit confusing)
so... first of all ... i have to say ... i'm still a pc user ... i don't have a Mac ... yet ... they are sold out right now in the shops near me ... i am waitting for them to arrive so i can pick up mine ... (i wish in a couple of days i will be entering the Mac world ....) ... i'll be picking the "entery" iMac model, the 21,5'', i5 with 500gb hard disk ... well .. i know it's the cheapest one (i hope it is a good machine tho) ... but it's my entering Mac world too (my only apple products till know were the ipod ...) ... one of my concerns are being the 500gb hard drive ... that for my pc experience is a little bit short ... that makes me a little scared (but paying 300e for the next model to have a 1tb disk, it's not a good option for me right now) ...
so..
I've been reading a lot about iMac's ans OS X so i can get familiar with this all new world ...
and i couldn't get any answer for some of my doubts... so i decided to ask you Mac Users ..
My idea is to have an external HD to store files (and not to fill the 500gb of the iMac) ... and i am wondering if it would be possible to make this ...
- make three partitions on the external Hard Drive and
- the first be formatted in Mac OS extended (journaled) mode
- the second on fat 32 - so i can store and share files with a mac or pc
- third be reserved for Time Machine
i wonder would that be possible... or would make sort of incompabilities ... would it work all well ?
hummm ...
I hope someone can help me with this ...
... if it is a silly question ... sorry ... but please remember, i've never had a Mac computer (i'm waiting for my 1st iMac to be available on store) ... so a lot of things are "flying" in my head right now ...
... and of course .. sorry for my english ... i hope you all understood me ...
thanks (obrigado) a lot for your patience...
Rui from Portugal

Hi! Dwagner, once again ...
I've just got my Mac last friday ... i'm still getting amazed with this new world to me ... eehe .. quite different ... but
... "i can do it, i can do it" eheeh
i'm in that period that a new question appears at almost every mouse click ... lol
so ... can you help me (once again) ..
you said you had your hard drive with this settings...
"You can partition for OSX (extended Journal) - read/write by only OSX or read only by Windows via BootCamp
You can partition for Windows (NTFS) - readable by only Windows
OR - you can format with ex-FAT and this is read/write capable for both operating systems."
how did you formated the partition in NTFS ? ... on the mac? using the "disk utility" ? or did you use another program to do so ...?
i hope i'm not "bugging" you ... this might be a silly question for most of people ... but right now ... it's a major question for me ... ehehe
once again Obrigado (Thank You)
Rui from Portugal

Mac disk accidently formatted for windows...

I pulled a mac hard disk from a friends broken Powerbook G4 - formatted with OS 10.x - with the intention of pulling all the info off the drive so my friend could save his files. After putting the drive in a USB2 enclosure, I could see the files fine, and was about to transfer them to my HD, when my braniac son who builds PCs for fun asked what I was doing. I expalined that my friend had purchased a windows PC and would not likely be able to view the files on his PC, so I was going to transfer them to my machine, reformat the disk to work with windows, and transfer the files back. Maybe there was an easier way, but I am not aware what it would be.
My son said "no problem dad- windows can read that disk". BEing the eternal pessimist, I said "OK, show me". He plugged the disk into his machine and viola- nothing happened. He was surprised, and started typing furiously- and before I could ask what he was doing I guess he put a windows partition on the drive with windows 7 drivers - I think it is NTSF. But he still could not see the files.
I stopped him ASAP, and took the disk back to my Mac. I opened disk utility, and I saw 2 partitions- one 250MB with the windows format. The other -I think- was "unformatted". I downloaded Data Rescue 3, and scanned the disk. That application can see the files I need, but I am thinking there has got to be another way without spending $100. When I use Disk Utility now, the drive shows it is "unformated".
What I want to do is somehow mount this on my Mac, possibly rebuild a directory and offload the files.
Thoughts?

Have your son cough up the $100. You broke it. You fix it!
Try:
"TestDisk is a free data recovery utility. It was primarily designed to help recover lost data storage partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software, certain types of viruses or human error (such as accidentally erasing a partition table)."
http://en.wikipedia.org/wiki/TestDisk
The more you mess with the disk, the greater the chance of trashing the disk. I'd say TestDisk is too risky.
Mess with a virtual hd.
Use disk utility to create. Not shown in the example.
I think if you rename the created file to .dmg, it will just work.
Do a bit-by-bit copy
In Mac OS 10.4, you can use the following command to display all the partitions:
Macintosh-HD -> Applications -> Utilities -> Terminal
# This is a little deep.
#It is best to do the pdisk command before you eject the external hard drive. Now, eject the external hard drive. Do another pdisk command to see what drive name has disappeared. The disappearing name is the name of your external hard drive.
sudo pdisk -l
#for details...
man pdisk
#The syntax is different for Mac OS 10.2. I do not know about 10.3.
# Do a bit-by-bit copy.
#eject the partition
Macintosh-HD -> Applications -> Utilities -> Terminal
dd if=/dev/disk0s10 bs=4096 | gzip | dd of=~/disk0-s10 bs=4096
#this can take awhile. Open another window and do ls -l ~/disk0-s10
# Here is how to restore the partition.
dd if=~/disk0-s10 bs=4096 | gunzip | dd of=/dev/disk0s10 bs=4096
Remember to erase the large zero data file before backing up.
Robert

How do use different formatting for a distinct "Section"

I have experienced formatting problems with an older document after upgrading to Pages 2.
There was a distinct "section" within that document with a different "top" and "bottom" border. I find myself unable to change the top and bottom borders within just the Section I want to revise. When I try dragging the ruler on the page in question, it changes the settings for the entire document.
Questions:
(1) How do I ensure that one of my document's pages is, in fact, a distinct Section with its own formatting?
(2) How can I change the page setup of that Section independently of the rest of the document?
PowerMac G5 dual 2.0 Mac OS X (10.4.4)

Hello David,
now I'm back for your problem. You are right: the settings "Before" and "After" of the Layout Inspector are only for the areas at the Layout Breaks unlike the "Left" and "Right" number fields. If you have long Sections you have to use a workaround.
You have to insert a placeholder at the top and at the bottom of the pages to "simulate" the wider margins. But don't be frightened, you don't have to do it for every page. For that, Pages has the Section Master.
If you have a "Facing Pages" document, place rectangles (the placeholders) with no outline and with no filling at the top and at the bottom of a left and a right page. This rectangles should be adjusted in that way, so they have the same width like the text area and the same height you want to have for the wider Margins. Give the placeholder the "Fixed on page" setting in the Wrap Inspector and no "Extra Space". If you have a none "Facing Pages" document, you have to position the placeholder only on the top and the bottom of one page. Please notice the settings "First page is different" and "Left and right pages are different" of the Layout Inspector.
After you have placed the rectangles, select them and choose the menu item "Format/Advanced/Move Object to Section Master". Now you have the space at the top and the bottom of every page in that Section. Only the Section with the oversized images may not have the placeholders.
Excuse me, that I haven't mentioned the workaround the first time, but to write the Layout Border thing. I have forgotten that only the "Left" and "Right" border settings are for all pages.
Frank.

IPod Nano Sync with Mac, but iPod formatted for Windows

I finally changed to the Mac platform and all my iPods and iPhones were synced with a Windows based computer. While my iPhones were not a problem, my iPod Nano (4GB 2nd generation) seemed not be recognized by my iMac.
I can't seem to get my iMac to show the iPod under Devices to reformat it. Anyone have any advice to give?
I have plugged it in to a my Windows based work laptop and it seems to work fine. However I don't sync with that machine and I have already sold my old Windows based computer it was synced to.
Thanks in advance for the help.

I have three iPods: 40GB iPod photo, 2GB black iPod nano and 1GB iPod shuffle. Each one has it's own playlist to auto sync songs from (technically, the 40GB iPod is synchronized manually, but the other two have playlists to sync automatically from). They each have different names so iTunes knows they're each different. So, you shouldn't have any trouble keeping just two iPods separate with your Mac mini or iMac.
-Doug

Different format for page numbers on different pages

Hi guys,
Currently I'm about to finish my thesis. Pages has been a great help with everything, until now. The problem is that I want to add page numbers, but some pages should have a different numbering then others. To clarify here is my table of contents with the desired page numbers:
-Figures          i
-Tables          ii
-Acronyms     iii
-Chapter 1     1
-Chapter 2     15
-Chapter 3     27
-Appendix     iv
-Summary     v
So the stuff that is not directly main content should be numbered in roman numbers. The chapters then can have normal numbers.
I've been trying for a while to make this happen now, but without luck. Anyone know how to accomplish this? I would be very thankful.

Divide into Sections by inserting section breaks between and make the Roman numerals the first part and restart the numbering at Chapter 1:
Inspector > Layout > Section > Start at: 1 / uncheck Use previous headers and footers
To change the numbering format in the header or footer, right click on the page number and choose what you want.
Peter

Mac-Address Different format for Authorization on Cisco ISE

Similar Messages

Maybe you are looking for