MAC address gets removed from the CAM 4.8 Filter List??

Hi,
we got WLC and NAC integration going. I have a smartphone wi-fi client I would like to exclude from logon and posture assessment, so I add the MAC into the CAM's Filter List. It works fine for a short while and then the MAC gets deleted from the list for some reason. Here’s what CAM log show (roughly an hour between the MAC is manually added and then gets deleted):
any ideas why it's happening and how to fix this?

Faisal,
I looked through the NAC log again, and I did miss another piece of info, so here's how the log looks after adding the MAC in the filter list:
Administration      2010-11-01 17:53:31       38:E7:D8:0B:42:A3 added to MAC list
Administration      2010-11-01 18:51:10       38:E7:D8:0B:42:A3 removed from the MAC list
Administration      2010-11-01 18:51:10       (API removemac): Succeeded!
So, it looks like there is some process running that removes the MAC from the list every time it's added in raughly an hour?
Dmitri.

Similar Messages

IChat Error: "Can't get video from the camera"

When I try to Screen Share with iChat on a local network, I receive the error "Can't get video from the camera" when I have an external camera plugged into the FW400 port on my Mac Mini. The Screen Sharing feature works great when the camera is not connected. Anyone know why this is and how to fix it?

Tell us about the Network you created please.
What make and model modem ?
Can it route (issue IPs) ?
IS there a router ?
Make and model of that please ?
If there are two devices which is doing DHCP if any are ?
IS there any computer that is sharing it's Internet Connection with any other computer ?
I take it from the title and the post that you infer you can Video and Audio chat ?
The Cannot get Video from Camera normally gets and Error Log pop up.
This can be opened with the reveal triangle on the left. The Details shown will have a Error number. Do you know what this log says ? (normally Error 20 or 21)
Old logs are stored in Users/(your account)/Library/Logs/iChatConnectionErrors by date.
IF you post an Error Log stop at the line that Says "Binary Images for iChat" as we don't need the bits below that yet.
As the Screen share in iChat uses an Audio component then the Camera if it is also the Mic needs to be ON.
In your case this may mean that in the ichat Video Menu both Camera Enabled and Mic Enabled should both be ticked.
(I have never seen an iChat error code for not (specifically) being able to get the Mic input so the message might be the only one iChat can pop up)
It does seem very odd that it only effecting Screen Sharing.
I have a Firewire connected DV converter that has two Firewire ports itself so I can input the camera feed to two computers. When this is in place the System also sees it as a Network.
I have also heard of one person with a Firewire Stills camera and I think the Storage space was seen as an External Device and therefore appeared Networked which is why I asked the first set of questions.
iChat does not like being in Two networks (a modem that issues IP address and a router doing the same or Wireless to a neighbour and Ethernet to your Own Internet connection, the Mac being the hub in a Share Internet connection, Wireless and Ethernet to the same router and using Parallels when set to Share the Mac's IP are the most common)
The Screen Sharing option in iChat > Video Menu is ON ? (at both ends ?)
As iChat's Screen Sharing is related to the System Screen Sharing and therefore Apple Remote Desktop you may find that in any routing device you may have to open ports 5900 and 5988 if not using UPnP
http://support.apple.com/kb/TS1629?viewlocale=en_US
You said Local Network. Do you mean this is using the Bonjour Buddy List ?
11:21 AM Saturday; June 14, 2008

Airport & Can't get video from the camera

Ok, So I've been reading through the discussions trying to figure out what's wrong, and then how to fix it. I keep getting error "Can't get video from the camera"
Here's my setup: OSX 10.4.4 on 1 Ghz PB. iChat 3.1.1, I'm connecting using a Dazzle Hollywood DV Bridge with an analog camcorder attached. I can get a video preview, but no video chats.
My connection is via a DSL modem (Cisco 725) and my ISP says all the ports needed for iChat are not blocked. my local network goes from the Cisco to an Airport (dual ethernet) which then distributes the IP addresses.
I've read that airports need to be switched so that they do not control the IP addresses, but when I do that my network stops working. Is there any way around disabling the NAT on the airport?
PowerBook G4 1MHz/1Gb Mac OS X (10.4.4)

Hi EdM
I think that I'm starting to see the light... Let me see if I have this right.
My PB has an IP of 10.0.1.4 via Sys Prefs, etc..
And the Airport is 10.0.1.1 and is distributing IP addresses (hence the 10.0.1.x IP numbers - right)
Yep (so far)
So using Terminal I need to type:
set net entry add 10.0.1.4 5060 udp
...and so on...
Nope. You need to have Distributing Addrress deselected in the Airport if it is in the link
With the Modem doing DHCP you should get an IP from it (mostly 10.0.0.3 as the Airport will also be given one)
Once the Modem's issued IP appears on the Mac then you log on to the modem (10.0.0.1) in Terminal, and Forward the ports to the IP the Mac gets.
Your wife's PC is also likely to need some ports open for her Apps and this will be a different IP.
I have only brought some of the details from the Port Forward site so I would make sure you check any Read Me or manual (On the CD ? web site ?) that might give you more clear instructions.
I would set it up with the Airport Out of the loop first as this will confirm the modem is in DHCP mode (you will not get an IP otherwise).
9:48 PM Thursday; February 16, 2006

"Disconnected from Screen Sharing because: Can't get video from the Camera"

Whenever I try to do Screen Sharing with another Mac (with Leopard), I get this warning:
"Disconnected from Screen Sharing because: Can't get video from the Camera"
It doesn't seem to affect video chats, which I can do just fine.

It's an AirPort Express, but the problem doesn't seem to be unique to the router. I tried it in another location with another router and it still didn't work.

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

If I press "Erase all contents and settings" does the iCloud account get removed from the iPhone?

If I press "Erase all contents and settings" does the iCloud account get removed from the iPhone?
I also do not know the password to the iCloud account and when I go to the "Forgotten Password" link, it says that account is not found.

Yes, but you will not be able to erase it without the password if Find My iPhone is turned on. If you need to reset your iCloud password, read here: http://support.apple.com/kb/PH2617. Of course, you can't reset the password unless it is your iCloud ID.

Contact groups. My contacts get removed from the groups, not from All Contacts. I don't know why this happens. Anyone know why?

Sometimes the contacts in certain groups are removed and the group is empty. They do not get deleted, and are still in All Contacts, just get removed from the group. Then I have to start all over again and add contacts to the groups. This seems to happen randomly and I don't know why it does. My contacts are synced with my Yahoo contacts. I don't know if thats why. Does this happen to anyone else?

Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off

No Video/Cannot get video from the camera

I'm in Phoenix on a business trip and I've connected to the hotels "high speed" internet access. I've launched ichat and have attemted to engage an video conference with some friends.
I can connnect via text and audio but to no avail with video.
The error "cannot get video from camera" I believe is the error message, keeps coming up. Why ? Is the Hotels network at fault since it is quite extensive. Firewalls in the hotels network ?
Thanks

Hello again,
I have an ADSL connexion (free in France) with a Freebox (acting as a normal modem) then a netgear router/switch. Since the netgear is not uPnp, I configured the port forwarding to my mac (since forwarded everything above 4000 (TCP and UDP) to go to my mac (slight exageration, but worked).
It worked before, so this setup is not the problem. Probably a software upgrade. I downgraded to Quicktime 7.01 but wasn't able to test it yet. Will do this week end.
If that's the problem, frankly, Apple is very bad at communicating around iChatAV. It should be in the troubleshooting papers somewhere like "Quicktime 7.03 can be an issue for iChatAV". I also have all the developer tools installed and the latest Java 5. I can't see how that would be an issue though.
Alex

Did the Grand Theft Auto Series Get Removed from the App store?

I went to buy GTA San Andreas last week it was there and this morning it wasn't. Did it get removed??? Changed???

I truly hope Rockstar Games is permanently removed from ever publishing games to Mac App Store. Their complete lack of support is something no one should ever experience when throwing cash for their uncomplete buggy games. What good is an awesome classic when it can't work properly on a modern computer? Very sad.

Strange "can't get video from the camera"

Hi,
i am on a pb 17 inch 1.67 and i just installed 10.4.5.
I ahd a successful ichat with another isight user just minutes before, but now i always get this error when i try to connect to them.
I tried to change ports and all, checking firewalls , but to no help.
any hint?
thanks.
A.

Hi mwm,
Do you have any Video or Audio Capture cards or equipment ?
Have you tried Unplugging the camera and plugging it in again ?
Also try Shutting down.
Disconnetcting formth e modem.
Restart the computer.
Restart iChat
Plug in the cable from the computer to the modem.
Log into AIM
11:10 PM Tuesday; February 21, 2006
iChat Resources Web Pages

Can't get video from the camera

I like many have had this problem in the past but came across this article
http://homepage.mac.com/mitch.chapman/iblog/C590069509/E20051114095018/
which links a connection between iChat and PostgreSQL. Tried it and it worked and as I haven't seen it here, thought I would post it for others to try.

HI Roger,
In the previuos incarnation of the iChat discussions this thread was a "Sticky" item which meant it was held at the top of the discussions
http://discussions.apple.com/thread.jspa?threadID=205966
Soloution to this is here http://www.postgresql.org/docs/7.2/interactive/kernel-resources.html
Ralph

How do I get photos from the camera roll to a flash drive from my iphone

I have some photos on my old iphone camera (camera roll) that I would like to save to a flash drive. Not sure how to do it

Copy them to your computer and then transfer them to the flash drive. Copying personal photos and videos from iPhone, iPad, or iPod Touch to your computer, http://support.apple.com/kb/HT4083

Why the URL gets removed from the WAS ?

Hi,
I deployed a WebDynpro and when I call the URL (for example: http://server:50000/webdynpro/dispatcher/local/WD11111/MyApp), I get that the application is not found.
So I deploy it again and it works for few days and after I get the same error message.
How can I solve the problem.
Thanks in advance.

Hi,
fully qualified domain name
Regards, Heidi
PS: For Web Dynpro ABAP, see http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
Message was edited by: Heidi von Geisau

Cisco 831 and "Can't get video from the camera."

I'm running a Cisco 831 router with ios 12.4(5a) installed. Every time I try to initiate a video chat with a computer going through the router, I get the "Can't get video..." error. It works fine with computers on my internal network and if I bypass the Cisco router and plug straight into my Cable modem.
I've covered every conceivable TCP/UDP port being open (per numerous pages re: port 5060, 5190, etc.) and have even gone as far as testing with "permit UDP any any" and "permit TCP any any" at the top of the rules. No luck.
I've been reading about the possibly needing to "unbind" SIP (port 5060). Is this something that a Cisco 831 router would require? The router doesn't seem to respond to any of the documented Cisco command re: VoIP and does not have any phone support that I'm aware of.
If anyone has any info that can help me get his up-and-running, I'd be much obliged.
Thanks,
Matheau

Hi Kcritchie,
It will most likely look like that. But in this case it should be on the UDP protocol.
The link looks useful (it takes a scroll down to see it for others looking)
If I do nat bindlist in my Alcatel I get this
Last login: Thu Jun 29 12:36:20 on console
Welcome to Darwin!
Ralph-G4:~ Ralph$ telnet 10.0.0.138
Trying 10.0.0.138...
Connected to speedtouch.johnshome.
Escape character is '^]'.
Username :
(Pic line drawing edited out here )
=>nat bindlist
Application Proto Port
ESP esp 1
FTP tcp 21
GRE gre 1
H323 tcp 1720
IKE udp 500
ILS tcp 389
ILS tcp 1002
IP6TO4 6to4 1
IRC tcp 6660-6670
JABBER tcp 5222
JABBER tcp 15222
PPTP tcp 1723
RAUDIO(PNA) tcp 7070
RTSP tcp 554
=>
On my device this is because the SIP binding on UDP port 5060 is unbound.
2:30 PM Thursday; June 29, 2006

MAC address gets removed from the CAM 4.8 Filter List??

Similar Messages

Maybe you are looking for