MAC address missing
My brother played in my iphone,hee jailbreak it and try to change MAC address of iphone ,after that device asking for Restore ,after restore my WiFi is not working,when i check about page its showing wifi address N/A ,Please help me to run my device with wifi...
You can get no help at all with a jailbroken device.
Similar Messages
-
what i need to do to fix this problem? Do you have firmware to re-install? please help or advice
Did you already check this article?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Did you try to set up your iPod as new device?
How to back up your data and set up as a new device -
Missing MAC addresses filtering in Linksys E2500 config
Hi,
I'm currently setting the MAC address filtering for my Linksys E2500 router.
I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting.
But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
Please help.
Thank you.I am having exactly the same problem with the same device (E2500; Firmware Version 1.0.01).
For the first several days (less than a week after I upgraded from excellent by every measure WRT54GL) E2500 worked fine with twenty one MAC addresses in the list.
Yesterday I tried to add a twenty second MAC address, and the list went down to 16 items (the rest being zeroes) .
Now I am limited to 16 addresses in the list.
It looks like a firmware bug to me. -
How can I find MAC address based on the serial number of a missing IpodTouch 4th Gen?
My Ipod touch 4th Generation is lost. If I can find the MAC address, the Univeristy can help locate the device. I have the serial number, is there any way I can find the MAC address based on the serial number? I did not install a third party app on the IPod to help find it and it is not registered on iCloud, but I used it on iCloud. Any ideas are greatly appreciated.
Did you turn on FindMyiPd is Settings>iCloud and is the iPod connected to wifi? That is all that is needed for for Apple FindMyiPhone
Maybe Apple can find the MAC address
Apple - Support - iPod touch - Contact Us
Your question has been asked in the past but no one has responded if Apple could actually help -
ICloud to Mac Address Book - Two Questions
Okay, I have learned/accepted that iCloud is not the sync'ing deal that MobileMe was (missed that in the fine print as I have been a loyal .mac user from its inception and like the MM syncing). I understand that everything is updated in the cloud and pushed to various devices (for me, iPhone 4S, new iPad and 2009 MBP). So, how is it possible for my iCloud address book to have more contacts than my MBP address book? Wouldn't all of the ones in iCloud be pushed to the MBP? The only thing I can think is that before I understood the concept that there are two address books resident on the MBP, I starting deleting what I thought were duplicates since I wasn't able to merge them due to two different sources. I could not find a way at that time to tell me which line was from what source. Then, once I get the two address books matching - mostly to ensure that I am not missing anything in the iCloud one - what purpose does the Mac based address book serve? I just had a nightmare of dragging various cards from my iCloud address page on the right into the iCloud group on the left and only to realize after doing at least 20 cards that after the first one, the left page registers back up putting the Mac based group across from the iCloud contact list so I dropped many of them into the Mac group instead of the iCloud group. The iCal doesn't maintain a Mac version and an iCloud version, why does the address book? BTW, all software on all devices is up to date as of this posting.
Please pardon what may be a silly question. This is my first ever post...
I was thinking about deleting "On My Mac" address book per your above instructions, and sticking with the one iCloud contacts. The problem I am afraid of running into is this: In iTunes, when I sync contacts, the groups that show available for syncing all come from "On My Mac". If I delete from the Mac, will that make my "Contacts" icon on my iPad 'dead'? Thereby, forcing me to log onto iCloud to view my Contacts, instead of a handy shortcut???
Or will I simply get to forgo the iTunes syncing... and the "contacts" icon on my iPad will reflect what was synced thru iCloud?
If the latter is true, does that simply mean I will need to recreate my "groups" in iCloud?
Thanks in advance, I certainly need some guidance. -
ARP table not populating mac address for previously reachable IP address
Router has been online and working fine with one BGP neighbor for almost 2 years and no downtime. 2 weeks ago, added a 2nd BGP peer. Everything worked fine for 2 weeks, then all of a sudden yesterday the 2nd BGP peer is disconnected and does not come back. ISP checks and sees everything looks fine on their end. We cannot even ping each other now.
Upon investigation, the ARP table is not even populating the MAC address for the BGP peer IP anymore (same local subnet). Stays "incomplete" in the table no matter what we do, including clearing arp table, changing IP address, etc.
Plug a laptop directly into the 2nd BGP peer FE port and replicate the IP addressing. Laptop cannot ping Router, but Router CAN ping laptop. Check ARP table, but STILL no mac address assigned and now not even the ARP table showing "incomplete".
Thinking it could be the FE interface, switch to the 2nd FE interface and perform same laptop test, this time with arbitrary IP addressing. Now cannot ping each other, no MAC in ARP table.
End up rebooting the router and lo-and-behold, everything is working normally again. 2nd BGP peer peers up instantly.
I should also mention that the 1st BGP peer worked flawlessly throughout, taking all the Internet load and having no issues throughout.
Also, the FE ports for the 2nd BGP peer are on an HWIC FE card plugged into the router. The 1st BGP peer is plugged into the built-in GE interface. 2901 running: c2900-universalk9-mz.SPA.151-4.M4.bin
Lastly, no router resource issues, no error messages, no logs. Just the BGP peer disconnecting.
I have never, in 20 years working with Cisco routers seen something like this before. This is the most fundamental aspect of IP and Ethernet that was not working.
Has anyone ever seen this behavior before??
Here is the router config (IP's changed):
version 15.1
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service internal
service sequence-numbers
boot-start-marker
boot-end-marker
logging buffered 150000
aaa new-model
aaa authentication login LAUTHEN local
aaa authentication login TAUTHEN local group tacacs+ enable
aaa authorization console
aaa authorization exec LAUTHOR local if-authenticated
aaa authorization exec TAUTHOR local group tacacs+ if-authenticated
aaa session-id common
clock timezone PST -8 0
clock summer-time PDT recurring
no ipv6 cef
no ip source-route
ip cef
no ip domain lookup
multilink bundle-name authenticated
username ubiadmin privilege 15 secret 4 .JbeuWXuZvchrG0OL.5BftFtqrrEyxcnVHn5rIuCnTk
username umitsnoc01 privilege 15 secret 4 cUmoRUjey9O1x.wk9S.kleX.iAAhCwihupr6Z98p6OA
redundancy
ip ssh version 2
track 1 interface GigabitEthernet0/0 line-protocol
class-map match-any AutoQoS-VoIP-RTP-Trust
match access-group name SIP-Media-INBOUND
class-map match-any AutoQoS-VoIP-Control-Trust
match ip dscp cs3
match ip dscp af31
class-map match-any Customer-Voice
match access-group name Customer-VPNs
class-map match-any media
match access-group name SIP-Media
class-map match-any signaling
match access-group name SIP-Signaling
policy-map AutoQoS-Policy-Trust
class AutoQoS-VoIP-RTP-Trust
priority percent 70
class AutoQoS-VoIP-Control-Trust
bandwidth percent 5
class class-default
fair-queue
policy-map queue
class signaling
bandwidth percent 5
class media
priority percent 50
class Customer-Voice
priority percent 40
class class-default
fair-queue
policy-map shape
class class-default
shape average 10000000
service-policy queue
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description BGP Peer 1
ip address 2.2.2.2 255.255.255.252
no ip redirects
ip flow ingress
ip flow egress
duplex auto
speed auto
service-policy output shape
interface GigabitEthernet0/1
description LAN
ip address 1.2.3.4 255.255.255.0
no ip redirects
ip flow ingress
ip flow egress
standby 255 ip 1.2.3.1
standby 255 priority 105
standby 255 preempt
standby 255 mac-address 1a2b.3c4d.5e6f
standby 255 track 1 decrement 10
duplex auto
speed auto
service-policy output AutoQoS-Policy-Trust
interface FastEthernet0/0/0
description BGP Peer 2
ip address 1.1.1.1 255.255.255.252
ip flow ingress
ip flow egress
duplex full
speed 100
service-policy output shape
interface FastEthernet0/0/1
no ip address
shutdown
duplex auto
speed auto
router bgp 7777
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 1.2.3.0 mask 255.255.255.0
neighbor 1.1.1.2 remote-as 5555
neighbor 1.1.1.2 update-source FastEthernet0/0/0
neighbor 1.1.1.2 prefix-list L3-DEFGW in
neighbor 1.1.1.2 route-map L3-LPREF-IN in
neighbor 2.2.2.1 remote-as 6666
neighbor 2.2.2.1 ebgp-multihop 2
neighbor 2.2.2.1 update-source GigabitEthernet0/0
neighbor 2.2.2.1 send-community
neighbor 2.2.2.1 prefix-list COLO-DEFGW in
neighbor 2.2.2.1 route-map COLO-LPREF-IN in
neighbor 2.2.2.1 route-map COLO-OUT out
ip forward-protocol nd
ip bgp-community new-format
ip as-path access-list 5 permit _5555_
ip as-path access-list 5 deny .*
ip as-path access-list 10 permit ^6666$
no ip http server
no ip http secure-server
ip flow-top-talkers
top 50
sort-by bytes
ip route 0.0.0.0 0.0.0.0 1.1.1.2 254 name L3
ip route 0.0.0.0 0.0.0.0 2.2.2.1 255 name COLO1
ip route 10.0.0.0 255.0.0.0 10.10.10.10 name FW_OUTSIDE
ip tacacs source-interface GigabitEthernet0/1
ip access-list standard SNMP_SOURCES
permit 12.12.12.0 0.0.0.255
deny any log
ip prefix-list L3-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-LPREF-OUT seq 5 permit 1.2.3.0/24
route-map COLO-LPREF-IN permit 5
match as-path 5
set local-preference 250
route-map COLO-LPREF-IN permit 10
set local-preference 150
route-map COLO-LPREF-IN permit 20
route-map COLO-OUT permit 10
match ip address prefix-list COLO-LPREF-OUT
set as-path prepend 7777 7777 7777
set community 29795:1004
route-map COLO-OUT permit 20
route-map L3-LPREF-IN permit 10
match as-path 10
set local-preference 200
route-map L3-LPREF-IN permit 20
set local-preference 150
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps ds1
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps license
snmp-server enable traps envmon
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps flash insertion removal
snmp-server enable traps mac-notification
snmp-server enable traps aaa_server
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps memory bufferpeak
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps cpu threshold
snmp-server enable traps rsvp
snmp-server enable traps syslog
snmp-server enable traps vtp
snmp-server enable traps ipslaWhen you were checking the ARP table was there an entry for Fast0/0/0?
HTH
Rick -
What am i missing?
pixfirewall# show mac-address-table
^
ERROR: % Invalid input detected at '^' marker.
[EDIT: karat is under the A in mac ]
pixfirewall# sh ver
Cisco PIX Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(3)
Compiled on Thu 07-Aug-08 19:42 by builders
System image file is "flash:/image.bin"
Config file at boot was "startup-config"
pixfirewall up 175 days 11 hours
Hardware: PIX-525, 256 MB RAM, CPU Pentium III 600 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : address is 000d.28f9.62a5, irq 10
1: Ext: Ethernet1 : address is 000d.28f9.62a6, irq 11
2: Ext: Ethernet2 : address is 000d.8810.a620, irq 11
3: Ext: Ethernet3 : address is 000d.8810.a621, irq 10
4: Ext: Ethernet4 : address is 000d.8810.a622, irq 9
5: Ext: Ethernet5 : address is 000d.8810.a623, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has a Restricted (R) license.
Serial Number: 807234146
Running Activation Key: 0x6ab205ba 0x986d4239 0xf56523af 0x76f3d58b
Configuration last modified by enable_15 at 12:58:08.130 EDT Thu May 16 2013
pixfirewall# show mac-address-table
^
ERROR: % Invalid input detected at '^' marker.Hi,
Command Modes The following table shows the modes in which you can enter the command:
Command Mode
Firewall Mode
Security Context
Routed
Transparent
Single
Multiple
Context
System
Privileged EXEC
Source:
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/s4.html#wp1448364
- Jouni -
Unable to import Mac address book
I am unable to import my Mac Address Book into Thunderbird.
In thunderbird, I have gone to tools>import>address book>text file . Address Book is not highlighted, so I am not able to choose it.
I have also tried to export it from Address Book. In Address Book I have also gone to file>export>export Group vCard, and it's the same porblem, Address Book is not highlighted, so I am not able to choose it.
What am I missing? Can someone please help?I just installed MFFAB 0.7 in a test profile of TB 31.1.1 with no problems, but on Win 7. Perhaps there is an issue installing it on the Mac OS, in which case I would contact the add-on author. Almost all add-ons can be installed on Win, OSX or Linux.
Otherwise, what happens if you open TB Address Book, Tools/Import, select Address Books, then vCard file, then select the .vcf file created from Mail app? -
How can I import iPhone contacts into Mac Address book
I recently purchased a MacBook Pro and am in the process of trying to dump my Windows PC.
All of my important contacts are on my iPhone. How can I get those contacts into my Mac Address Book?
The same question goes for the music (ripped from CD) and my video files that are on my iPhone? The media is not that big of a deal because I can easily transfer it from my PC to my Mac but I assume I am not the only one in the world trying to do this and that Apple would make it very easy for MSFT Windows users to easily migrate to Macs.
I must be an idiot but I don't see any option in iTunes to transfer the data from my iPhone into iTunes and/or the Address Book.
ThanksThe iPhone's primary function is NOT a word processor or a spread sheet analyzer.
I didn't say, nor was I trying to imply ANYTHING of the sort. You should read what I provided again a little slower and in it's entirety, not taking this out of context, which you made into Apples and Oranges.
It IS an iPod, a device designed to store and play music (in addition to being a browser and a phone).
It is a phone, an iPod, and an internet device, which supports transferring iTunes content from iTunes on a single computer ONLY.
Making it difficult to transfer my legal music from my iPhone to my Mac does not make me want to go out and buy more Apple products or Apple software.
Good, then don't - no skin off my back. I couldn't care less if you want to remain a Windows sufferer. All this doesn't come from Apple. Much of it comes from those who OWN the distribution rights for content sold thru the iTunes Store.
All of Apple's commercials imply how easy the user experience is over Windows. Well, in this case, they missed the boat BIG TIME!
Everyone is entitled to their opinion, but let me get this straight. You will likely need to transfer much more than just music from your Windows PC to your Mac and if so, how do you plan on accomplishing this? If you are transferring Word and Excel files, photos, and any other data, you won't be using an iPhone for this, so I don't see the big deal with transferring your iTunes library along with all other data being transferred.
I understand that the iPhone was not designed to be used as a backup. However, you allow the contacts to be merged in but not the music that I legally installed (but didn't purchase from the iTunes store).
I don't allow anything - this is a user to user help forum only.
As I provided in my first post in this thread - the sync process for contact information, calendar events, and bookmarks with an iPhone is bidirectional with the supported application on your computer. This is a sync process by definition of syncing - which is not the same for other data such as iTunes content and photos transferred from your computer to your iPhone.
http://support.apple.com/kb/HT1296
Apple wants to make it difficult unless I purchased the music from iTunes.
No, Apple or really those who own the distribution rights or the copyright holders for content sold thru the iTunes Store wants to make this difficult. Content sold thru the iTunes Store is set up by Apple to be a break even - which is included with the Apple stockholder's report. Apple makes their profit via sales of the iPod and iPhone. The bulk of the iTunes Store revenue goes to those who own the distribution rights or the copyright holders for the content.
In addition, if my hard disk suffered a crash and I lost all my music it just seems stupid not to be able to pull it off my iPhone (yes, I know data should be backed up on a different drive, and mine is, but I am sure a lot of people do not back up their data).
Maintaining a backup of your data is important for this very reason, and for other reasons which is not Apple's responsibility. I believe iTunes includes an occasional warning message to backup your iTunes library (which can be turned off), and iTunes includes an option to transfer content purchased from the iTunes Store from an iPod or iPhone - since the overwhelming majority of this content includes DRM protection required by those who own the distribution rights or the copyright holders.
The iPhone was not designed as an external storage device or as a backup device - end of story. If someone chooses not to maintain a backup, they are playing Russian roulette with their data. Maintaining a backup is important regardless the platform, but even more so when running Windows with constant virus, adware, and spyware concerns. -
Many users complained some wifi cards missing the
/configure/Advanced „Network Address” funktion.Without this function
does not work normal MAC adresses which begin for example
„00”.There are many
forums people write about (indignantly)
the problem.
picture here
of what
I mean:
stewx.cba.pl/extend-your-free-wifi-by-spoofing-your-mac-address/
older post more links:
social.technet.microsoft.com/Forums/windows/en-US/8f33667e-ba25-442c-a49b-a3aec79b6cc9/windows-781-can-not-change-the-mac-address-on-wifi-and-cannot-load-login-page-in-public-hotspot?forum=w8itpronetworking
I'm curious about the Windows 10 users
experience with different
wifi cards.
This function working perfectly, all linux platform,Mac,already in android,the old windows XP,windows 2000,
it's a basicthing.This problem affects some reason only are newer Windows platforms and directly the wifi option.well....it doesn't matter whether the MAC add is 00-14-BF-93-D2-66 or 00:14:BF:932:65 or any other format .. the most important thing is the hex decimal numbers are the same ... so not worry about it...
-
MAC Address Filtering and SPI set up
Hi,
I just purchased a WRT54GS V 6 wireless router. I updated the firmware to the latest (May 30) and the set up seems to be OK. Using the security recommendations in the manual as a guide, I implemented them - the turn off SSID, and the others.
IF I try to filter the MAC addresses (accept only those on the list) for my wife's Sony VAIO VGN - S260 laptop, it can see the network but will not connect. When I turn off the MAC filtering, it is fine. I used the WPA2 personal encryption, and input the passphrase into both router and computer.
My other issue is the firewall Statefull Packet Inspection (SPI). On the Security set up screen, firewall tab - I have the four radio button settings that I am supposed to (Block WAN request, filter Multicast, Filter NAT, & Filter IDENT), however, I do NOT have the option to turn on the firewall (SPI) above the 4 radio buttons - that setting is totally missing from the set up screen. Reference Page 28 of the manual.
I would appreciate any help or suggestions, as I could not find any ideas searching the forum. Thanks for your helpyou can try and change a few wireless settings ....in the routers wireless section....go to the advanced wireless settings.....here you can reduce the beacon interval to 50...also reduce the RTS and Fragmentation by 40 each.....
-
WRT54GS - MAC Address Filter & Firewall SPI
Hi,
I just purchased a WRT54GS V 6 wireless router. I updated the firmware to the latest (May 30) and the set up seems to be OK. Using the security recommendations in the manual as a guide, I implemented them - the turn off SSID, and the others.
IF I try to filter the MAC addresses (accept only those on the list) for my wife's Sony VAIO VGN - S260 laptop, it can see the network but will not connect. When I turn off the MAC filtering, it is fine. I used the WPA2 personal encryption, and input the passphrase into both router and computer.
My other issue is the firewall Statefull Packet Inspection (SPI). On the Security set up screen, firewall tab - I have the four radio button settings that I am supposed to (Block WAN request, filter Multicast, Filter NAT, & Filter IDENT), however, I do NOT have the option to turn on the firewall (SPI) above the 4 radio buttons - that setting is totally missing from the set up screen. Reference Page 28 of the manual.
I would appreciate any help or suggestions, as I could not find any ideas searching the forum. Thanks for your help
Message Edited by donh127 on 08-07-2006 07:00 PMHi. Is your Mac mini loaded with the OSX server edition or OSX consumer edition? I am not 100% sure but I think you need a server edition to do that.
-
Mac address book blank after MS Office update
After using the stupid MS Office Updater on prompt, I find that all my contacts are missing from my Mac Address Book! I didn't even install Outlook but the stupid Updater did. My contacts aren't there though and sync is off.
I tried restoring the Address Book folder in the Library/Application support from Time Machine. Nothing.
I tried deleting the AddressBook-v22.abcddb file. Still nothing.
I tried deleting com.apple.AddressBook.plist. Nope. And the other prefs file, too.
I've tried these things several times, different sequence, restarting, yadayada.
I've been troubleshooting my own Mac's since the MacPlus and never been so stumped! I hate M$!
Ran this in terminal:
ls -aleO Library/Application Support/AddressBook
ls: Library/Application: No such file or directory
ls: Support/AddressBook: No such file or directory
leslie-wintners-MacBook-Pro:~ leia$
(No such file or directory?!!!!)
I will appreciate some expert advice and direction here. Thanks!
OS 10.6.8 MacBook ProHi sig, Thanks for the reply.
My Address Book was fine before installing this update. The earliest TM I have? And lose all the work I've done on this machine?
I've seen reports that other people had their contacts moved from Address Book to Outlook after this update. So, it seems very likely. Either it's the Update or the PowerPoint I opened that prompted me to update had a virus!
Since I posted, I went to the Genuis Bar, where I surprisingly got lectured about recovery is not what they do, and they could spend only 15 minutes with a customer, spending most of the time on the lecture, ultimately refering me to an expert. He found corruption on my HD and told me to wipe the drive and restore from backup. Ughh.
However, I reran DU and repaired the disk, tested the hardware even. DU reports the disk is ok now.
Yet, no Address Book.
Before I resort to wiping, I'm wondering if I could detect if I had a received a rare Mac virus... -
T61s, T60s & older model unable to PXE boot to SCCM (MAC address problem)
Hi,
We have a series of T60, T61 & older machines that are unable to PXE boot to SCCM. The T400 & X series & other newer models can boot just fine.
After checking further, we realised that only a certain range of MAC addresses are unable to pxe boot i.e
00-1A-XXXXXXX
00-1C-XXXXXXX
range.. all the other range of MAC addresses are fine to boot via network.
The error when doing network boot is "bad or missing discovery server list"
Also, we are running on SCCM 2012 at the moment. Our branch office who is running SCCM 2008 can have all the machines - regardless of models & brand boot just fine.
Any ideas? Much appreciated.did it obtain IP address from DHCP server? is DNS server address is configured in DHCP scope? can you ping using IP address?
if drivers are proper will suggest to update it in boot media & enable command line support to make it easy for deployment & troubleshooting.
Prashant Patil -
I have a Cisco 831 router. I am handing out DHCP to my network via the router
ip dhcp pool HmPrivate
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 192.168.1.20
domain-name hmprivate.net
What I am trying to do is assign the same ip address to my laptop via DHCP by associating the mac address of the laptop to the DHCP ip address. This is easily done on a windows server.
I have not been able to figure it out on this router though. I have looked at the commands under the pool as well as in config mode. Nothing is jumping out at me.
Any assistance is greatly appreaciated!Ok I powered up my laptop got an ip address from the rtr of 192.168.1.21. On the router i did a sh arp to get my hardware address of 0015.0025.60aa. I then created the new DHCP pool for the static entry. From my windows laptop i do an ipconfig / release then a ipconfig / renew. I keep getting the 192.168.1.21 address and not the 192.168.1.13 address that I want.
Am I missing something really simple here? Why wont the laptop grab the 192.168.1.13 address?
ip dhcp pool HmLaptop
host 192.168.1.13 255.255.255.0
hardware-address 0100.1500.2560.aa
default-router 192.168.1.1
dns-server 192.168.1.20
client-name dhopewell2
Here is a list of all DHCP pools on my router.
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp excluded-address 192.168.1.250 192.168.1.254
ip dhcp excluded-address 192.168.50.1 192.168.50.100
ip dhcp excluded-address 192.168.24.1 192.168.24.100
ip dhcp pool HmPrivate
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 192.168.1.20
ip dhcp pool HmWK
network 192.168.24.0 255.255.255.0
default-router 192.168.24.1
dns-server 10.0.101.12 10.0.101.13
option 150 ip 10.200.1.50 10.200.1.51
ip dhcp pool vlan10
network 192.168.50.0 255.255.255.0
default-router 192.168.1.1
dns-server 192.168.50.20
ip dhcp pool HmLaptop
host 192.168.1.13 255.255.255.0
hardware-address 0100.1500.2560.aa
default-router 192.168.1.1
dns-server 192.168.1.20
client-name dhopewell2
Maybe you are looking for
-
ISDN backup for ADSL connected sites using separate router
In our set-up we have a central site with a large number of remote sites connected. We have moved a number of remote sites from ISDN connections to ADSL connections. However, we would like to keep the ISDN and use it for backup. The problem I have is
-
How to correctly add multiple iframe objects?
I'm trying to load multiple iframes inside a symbol. I currently have 3. The way im setting them up goes like this: I have the iframe codes in the symbol actions: iframe code; rectangle name; iframe code; rectangle name; iframe code; rectangle mane;
-
Can I install presets on the Lightroom trial version?
Can I install and use presets on the Lightroom trial version?
-
Unable to install updates due to lack of space in phone memory
Hello, I am unable to install software updates into my phone due to lack of space in phone memory. Some non movable apps need to be moved to sd card. Give me suggetion.
-
Macbook pro using a lot of hard drive space
I just bought the new macbook pro with the 250 gig hard drive.. but without even transferring anything at all to my new mac from my old.. it already says it only has 178.1 gig's of hard drive space available.. is it seriously already using over 50 gi