Mac address of HP LaserJet Pro MFP M126nw

Hi People,
Recently bought HP LaserJet Pro MFP M126nw wireless printer and tried to connect to WIfi. but my Wifi is Mac authenticated and I need to configure the mac address of the printer into the network. But I dont know how to get mac address of the printer.
Need you help pls.......its urgent.
Thanks....
This question was solved.
View Solution.

Hi @Satishkumarsah ,
I would be happy to help you be able to get the Mac Address for the printer.
The configuration page lists current network summary and the Mac Address. To print a configuration page, do the following:
LED control panel:
1. From the product control panel, press and hold the Cancel button for 10 seconds.
2. Release the Cancel button.
LCD control panel:
1. From the product control panel, press the Setup button.
2. Open the Reports menu.
3. Use the arrow keys to select Config Report and then press the OK button to begin printing the report.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Wireless Connection Problem with Laserjet Pro MFP M126nw (HELP) :(

I have Laserjet Pro MFP M126nw just bought it last day.
Everthing working fine but i can't able to connect it to my wireless router via WPS PushButton or PIN tried both many times but failed.
I also reset my Router even changed the security level to
·  WEP key encryption using either Auto or Open authentication
·  WPA and
·  WPA2
Tried many times but it says connection failed on the LCD Display.
I have Linksys WRT120N wireless router.
Please help its urgent!

Hi @AjayKareer,
I understand that you are unable to setup the printer on the wireless network. I can help you with this.
Make sure the network name doesn't have any spaces or special characters. The printer won't recognize it.
Restore the printer defaults.
On the printer control panel, press the Setup button.
Press the Right Arrow, to select the Network Setup, and then press OK.
Press the Right Arrow, to select the Restore Defaults, and then press OK.
I have provided a document with some steps for setting the printer up on the network.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network.
Configure the wireless by a Ethernet connection if the issue persists.
Print a configuration page to get the printer's IP address.
Printing a Configuration Report.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in the password and type of Encryption if you have this setup or Open for no password. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
Then run the installation.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to enable WebScan feature in LaserJet Pro MFP M126nw Printer

I have installed a new LaserJet Pro MFP M126nw printer with wireless configured. The IP Address is 192.168.0.21. I visit http://192.168.0.21 through browser. I don't see Print/Copy/WebScan options there. I can see rest of the configuration tabs.
I am interested in WebScan feature to scan document from my Chromebook. Please let me know how to enable this.

Hi,
The Webscan feature is not available on laser printers, it is only available on Inkjet printers.
I afraid you can only print from a Chromebook, scanning to a such is not supported with the HP Laserjet Pro MFP M126 printer.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet Pro MFP M126nw printer installation error

computer display following error msg during installation of LaserJet Pro MFP M126nw printer. I havea system with intel core 2 Duo with 2 GB Ram, my Os is Window & Ultimate 32Bit.
please solve this issue as soon as possible.

Hi narin01,
I understand you are unable to install the printer software. I can help you.
Uninstall the software using the CD:
Touch the Windows Key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Do a msconfig to turn off any startup programs that might be interfering with the installation.
Click on start, in the search box type in run, press the enter key, then type in msconfig, click OK.
Click the Services tab. Click to select the Hide All Microsoft Services check box. Click Disable All, and then click OK. Then click on the start up tab at the top. Click on disable all.
Reboot the computer.
Temporarily turn off any Antivirus software.
Then run the installation again. Right click on the install and select Run as Administrator.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Copy Feature doesn't work -HP LaserJet Pro MFP M126nw- Windows 8

The copy function is not working and display is not showing anything. Also error indicator remains on

Hi there,
Welcome to the HP Forums!
I understand that your copy feature will not work on your HP LaserJet Pro MFP M126nw and the display will not show anything. I am happy to help you!
Please take a look through this guide. The Printer Will Not Turn On or Respond When the Power Button or Power Switch is Pressed.
Hope this helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

Installation problem LaserJet Pro MFP m126nw

Trying to install MFP Pro m126 nw on windows xp sp3 32 bit. Connected on usb,ethernet,wi-fi.
Installs scanner driver. Does not install printer driver, returns with fatal error.
Print & scan doctor returns printer not connected message.
tried grunist provided by HP upto level 3, no success
Can print through hp eprint via android mobile.
Can not connect laptop( lenovo c2d, 2gb ram, xp 32 bit sp3) to printer.
can scan through laptop.
Tried basic driver setup (drv_only_14087), tried full setup (full solution 14087) no success.

Hi @PareshKose ,
I see that you are getting a Fatal error when installing the printer, but you can scan and print through ePrint.
I can help you with this.
I have provided a document with some steps to try to see if that will resolve the issue.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
How to check for the Event error:
In the Run window, type eventvwr, and then click OK. The Event Viewer opens.
In the Event Viewer pane (on the left), click Application. The Event Viewer results display in the right pane.
In the Source column, find the most recent Error entry from HP, and then double-click the error entry. The Event Properties window opens.
In the Description section, look for a numbered code. This is the specific error message that you need for troubleshooting. Note the error code.
If you don't have a code, please follow this document:
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Mac cannot detect scanner option on HP Color LaserJet Pro MFP M177fw after trying every method

Hello,
I have recently purchased the new printer HP Color LaserJet Pro MFP M177fw and I am having a lot of trouble trying to scan. I have spend hours trying to fix this.
I have tried all the methods on this website, (trying through preview, printers and scanners (no scanner option showing) image capture, etc. I have also installed all the necessary drivers with no luck (CD and from HP website)
Then I tried all the other methods that were listed, I have tried restarting, deleting drivers and proceeding through image capture, preview and sanner and printers, it just does not have scan option anywhere.
The printer is working fine though, and I am connected to the printer through wifi
I do not know what else to try, please help.
Kinds regards
Zhanna

Hi @student ,
I see by your post that you aren't able to scan through the wireless network. I would really like to be able to help you resolve this issue.
When you added the printer, did you add it as a Bonjour printer or did you have to type in the IP address and add it through IP Protocal? The reason I am asking is because when adding the printer through IP Protocal you can only print, your not able to scan with the printer added this way.
Check the driver name that is installed for the printer. It should list just the printer's name. (HP Color LaserJet Pro MFP M177fw )
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
If the printer name isn't listed properly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver. (you might have to click the drop down to select the printer's name to add it in)
If you are still having issues, uninstall the printer software.
Uninstalling the Printer Software.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Empty the trash.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then install the printer software again. HP Color LaserJet Pro MFP M176/M177 Series Software.
If the issue persists, connect the printer directly to the Mac and try and scan through a USB connection. Just to rule out a network issue.
Please let me know the outcome.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?

hello,
i try few different way but still don't know how to scan things.
anyone know how to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?
it have no problem on printing by wifi.
thanks,
Les

Hi Les,
Follow these steps to scan with the HP Scan software:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
If you do not have the HP Scan Software located as the socument states, download and install the following software.
Be sure to seect HP Scan while installing the software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-124923-3&cc=us&dlc=en&lc=en...
Additionally you may scan with Apple's software by following these steps instead:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Color laserjet pro MFP M177fw loses IP address

New Color Laserjet Pro MFP M177fw keeps losing the IP address so my computer won't print via wireless. What to do?

Hi markfanderson12,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer keeps losing the IP address.
I will be happy to help you.
When the printer is installed on a network, (wired or wireless) the router assigns it an IP address.
However this IP address can change for various reasons. Most of the time the printer software will often adapt to the new IP address and printing functions will carry on as normal but the scanner software will not.
I would setup a static IP address for the printer once it is back on the network again to resolve this issue.
Printer Does Not Maintain Wireless Connection. Go to Solution three: Assign the printer a static IP address.
At the bottom, select Additional information for Tips for troubleshooting a wireless connection.
Hope this helps.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro MFP M225dw driver not available for Mac OS10.4.11

I can print by connecting the printer to the computer with USB connector. But without the driver, the printer is seen by the computer as a generic postscript printer; and the printer's special attributes such as 2-sided printing is not made available. Is there any alternative driver that may be used for this combination, please?

Hi @ayame ,
I see by your post that you are looking for the drivers for 10.4.11. I would like to help.
Unfortunately the only drivers available from HP are from 10.7 and higher.
HP LaserJet Pro MFP M225dw Drivers.
You have to update the Mac to use the Full HP Software drivers.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro MFP M225dw SMTP serwer error

Hello
I have problem with scannig to email from me new HP LaserJet Pro MFP M225dw, i configured everything and it worked i scanned and meiled a test scan. After 2-3 h i tryed to scan a new document and got error that me SMTP servers don't respond. I checked me SMTP server and he was working, i tryed to scan to meil from 3 others prienters a Canon, Xerox and another HP and it worked but on M225dw i got still error. I restarted the prnter and it worked for 1-2h but again i got the same error from printer, it told employes to reset prienter when they will have problem but this is not a solution. HP LaserJet Pro MFP M225dw is connected by ethernet cable, i can ping she the whole time, no pings droped, no problems with connection, i can prient normaly whe she gots SMTP error. PLZ help.

Hi @Joscelin ,
I see that you are experiencing intermittent issues when scanning to email. I would like to help you out today.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
What email client are you using?
Are you getting a 3 digit error code?
I would setup a Static IP address for the printer and set the DNS, to see if this help resolve this issue.
Print a configuration page to get the printer's IPv4 address.
Go to Setup, Reports, Configuration Report.
Type the IP address into your web browser's address bar, to access the printer's Embedded Web Server.
Click on the Networking tab.
Select IPv4 Configuration on the left side of the window.
Enter the values from the Configuration Page.
Then on the left side of the window, select Network Configuration and enter the following:
Preferred DNS Address: 209.244.0.3
Alternate DNS Address:209.244.0.4
Apply the settings.
Try and scan to email again.
If you are still having issues, set up the Scan to Email account again. I have provided the manual with the steps to complete this on page 50. LaserJet Pro MFP M225, M226.
Test the scan to email.
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

Hi there,
I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up? Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
Any ideas? Any help would be greatly appreciated
thanks!
Simon

Hello @Simonjayh,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
Step 1: Uninstall Drivers:
First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me.
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw Scanning

I bought and jsut setup an HP Color LaserJet Pro MFP M177fw.
We are a Mac household, and we connect via wireless to the printer, which works great.
My issue is scanning. On the little screen on the printer, I can copy, print and even fax. No option for scanning. There is some bullsh*t app that I've had to download via HP called Readiris, which is useless. There is no apparent way to initiate a scan via this app.
So I've bought a multifunction printer that doesn't scan. Any help?

It doesn't scan?!
Below is the text from the first page of the first link one clicks on about this printer. How _on earth_ is one supposed to deduce pre-purchase that it doesn't scan from the main menu? Argh. As an HP employee myself, this is aggravating in the extreme.
Ok, venting aside, this link <http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967506#N229> is not offering a solution.
I am running OSX 10.9.1. I am unable to find the Full Driver to donwload in order to connect to this printer in a manner that would enable any of the 3 methods of scanning (Via Preview, Image Capture, etc.) to work. Can you please provide a link to the Full Driver for this MFP M177fw for Mac OSX 10.9? Thanks.
*** Start copied text from online website on HP printer ***
This affordable HP Color LaserJet Pro MFP brings vibrant color printing
in-house, and boosts productivity with Ethernet connectivity. Enable easy
printing at work, home, or on the go with mobile printing features.1
Print speed:4
Black: Up to 17 ppm; Color: Up to 4 ppm
Scan resolution: Up to 1200 x 1200 dpi (hardware); Up to 1200 x 1200 dpi
(optical)
Copy resolution: Black (text): Up to 300 x 300 dpi; Black (graphics): Up to
400 x 600 dpi; Color (text and graphics): Up to 300 x 300 dpi
Display: 3.0" LCD (color graphics)
Standard connectivity: Hi-Speed USB 2.0 port; built-in Fast Ethernet
10/100Base-TX network port; Wireless 802.11b/g/n
Duty cycle:5
Up to 20,000 pages

Mac address of HP LaserJet Pro MFP M126nw

Similar Messages

Maybe you are looking for