Mac adress authentication with Radius
Hello all
we have an WiFi architecture based on two Radius servers (ACS 3.2)
We make a Mac adress authentication with WEP on these Radius servers. Ours Wirelless cards are Proxim Orinoco. When we used the user and the passord identified by the mac adress manualy that works.
But, the authentication by Mac adress with the wireless card don't work. The log on the radius servers are "CS PASSWORD INVALID".
Ideas ?
Regards
First ensure the password on the access point and the authentication server is the same. I have had this trouble getting authenitcated with ACS for admin authentication. Installing it on another machine made it work. So try uninstalling ACS completely using the recovery CD and reinstall it to check if this works.
Similar Messages
-
Outlook 2011 for Mac not authenticating with Exchange 2010
Hi,
We have an issue with our Mac Clients authenticating with our Exchange Server. We have Exchange 2010 Version 14.03.0174.001.
Outlook is saying the credentials are incorrect for the user when we know they work fine in OWA and in Outlook 2010.
It seems this is since we re-keyed are SSL certificate. I have changed the EWS directory to Basic Authentication and also re-created the EWS directory. I have also re-ran all the SBS Wizards.
Is there anything else we can do to get this sorted?
ThanksHi Robert,
I found a KB for your reference:
Sending email error "Authentication failed. Error 17897" in Outlook 2011 for Mac
http://support.microsoft.com/kb/2492901
If it not matches to yours, please paste the details without sensitive information.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Aironet 2702i Autonomous - Web-Authentication with Radius Window 2008
Hi Guys,
I have a problems with case, i have diagrams sample like then : AD(Win2008) - Radius(Win2008) - Aironet 2702i => Use methods Web-Auth for EndUser
This is my Configure file on Aironet 2702i
Aironet2702i#show run
Building configuration...
Current configuration : 8547 bytes
! Last configuration change at 05:08:25 +0700 Fri Oct 31 2014 by admin
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Aironet2702i
logging rate-limit console 9
aaa new-model
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login DTSGROUP group radius
aaa authentication login webauth group radius
aaa authentication login weblist group radius
aaa authentication dot1x default group radius
aaa authorization exec default local
aaa session-id common
clock timezone +0700 7 0
no ip source-route
no ip cef
ip admission name webauth proxy http
ip admission name webauth method-list authentication weblist
no ip domain lookup
ip domain name dts.com.vn
dot11 syslog
dot11 activity-timeout unknown default 1000
dot11 activity-timeout client default 1000
dot11 activity-timeout repeater default 1000
dot11 activity-timeout workgroup-bridge default 1000
dot11 activity-timeout bridge default 1000
dot11 vlan-name DTSGroup vlan 46
dot11 vlan-name L6-Webauthen-test vlan 45
dot11 vlan-name NetworkL7 vlan 43
dot11 vlan-name SGCTT vlan 44
dot11 ssid DTS-Group
vlan 46
authentication open eap DTSGROUP
authentication key-management wpa version 2
mbssid guest-mode
dot11 ssid DTS-Group-Floor7
vlan 43
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 013D03104C0414040D4D5B5E392559
dot11 ssid L6-Webauthen-test
vlan 45
web-auth
authentication open
dot1x eap profile DTSGROUP
mbssid guest-mode
dot11 ssid SaigonCTT-Public
vlan 44
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 04480A0F082E424D1D0D4B141D06421224
dot11 arp-cache optional
dot11 adjacent-ap age-timeout 3
eap profile DTSGROUP
description testwebauth-radius
method peap
method mschapv2
method leap
username TRIHM privilege 15 secret 5 $1$y1J9$3CeHRHUzbO.b6EPBmNlFZ/
username ADMIN privilege 15 secret 5 $1$IvtF$EP6/9zsYgqthWqTyr.1FB0
ip ssh version 2
bridge irb
interface Dot11Radio0
no ip address
encryption vlan 44 mode ciphers aes-ccm
encryption vlan 46 mode ciphers aes-ccm
encryption mode ciphers aes-ccm
encryption vlan 43 mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
ssid DTS-Group
ssid DTS-Group-Floor7
ssid L6-Webauthen-test
ssid SaigonCTT-Public
countermeasure tkip hold-time 0
antenna gain 0
stbc
mbssid
packet retries 128 drop-packet
channel 2412
station-role root
rts threshold 2340
rts retries 128
ip admission webauth
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 subscriber-loop-control
bridge-group 43 spanning-disabled
bridge-group 43 block-unknown-source
no bridge-group 43 source-learning
no bridge-group 43 unicast-flooding
interface Dot11Radio0.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 subscriber-loop-control
bridge-group 44 spanning-disabled
bridge-group 44 block-unknown-source
no bridge-group 44 source-learning
no bridge-group 44 unicast-flooding
ip admission webauth
interface Dot11Radio0.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 subscriber-loop-control
bridge-group 45 spanning-disabled
bridge-group 45 block-unknown-source
no bridge-group 45 source-learning
no bridge-group 45 unicast-flooding
ip admission webauth
interface Dot11Radio0.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 subscriber-loop-control
bridge-group 46 spanning-disabled
bridge-group 46 block-unknown-source
no bridge-group 46 source-learning
no bridge-group 46 unicast-flooding
interface Dot11Radio1
no ip address
shutdown
encryption vlan 46 mode ciphers aes-ccm
encryption vlan 44 mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 43 mode ciphers aes-ccm
encryption vlan 45 mode ciphers ckip-cmic
ssid DTS-Group
ssid DTS-Group-Floor7
ssid SaigonCTT-Public
countermeasure tkip hold-time 0
antenna gain 0
peakdetect
dfs band 3 block
stbc
mbssid
packet retries 128 drop-packet
channel 5745
station-role root
rts threshold 2340
rts retries 128
interface Dot11Radio1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 subscriber-loop-control
bridge-group 43 spanning-disabled
bridge-group 43 block-unknown-source
no bridge-group 43 source-learning
no bridge-group 43 unicast-flooding
interface Dot11Radio1.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 subscriber-loop-control
bridge-group 44 spanning-disabled
bridge-group 44 block-unknown-source
no bridge-group 44 source-learning
no bridge-group 44 unicast-flooding
ip admission webauth
interface Dot11Radio1.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 subscriber-loop-control
bridge-group 45 spanning-disabled
bridge-group 45 block-unknown-source
no bridge-group 45 source-learning
no bridge-group 45 unicast-flooding
ip admission webauth
interface Dot11Radio1.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 subscriber-loop-control
bridge-group 46 spanning-disabled
bridge-group 46 block-unknown-source
no bridge-group 46 source-learning
no bridge-group 46 unicast-flooding
interface GigabitEthernet0
no ip address
duplex auto
speed auto
dot1x pae authenticator
dot1x authenticator eap profile DTSGROUP
dot1x supplicant eap profile DTSGROUP
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 spanning-disabled
no bridge-group 43 source-learning
interface GigabitEthernet0.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 spanning-disabled
no bridge-group 44 source-learning
interface GigabitEthernet0.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 spanning-disabled
no bridge-group 45 source-learning
interface GigabitEthernet0.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 spanning-disabled
no bridge-group 46 source-learning
interface GigabitEthernet1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet1.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 spanning-disabled
no bridge-group 43 source-learning
interface GigabitEthernet1.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 spanning-disabled
no bridge-group 44 source-learning
interface GigabitEthernet1.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 spanning-disabled
no bridge-group 45 source-learning
interface GigabitEthernet1.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 spanning-disabled
no bridge-group 46 source-learning
interface BVI1
mac-address 58f3.9ce0.8038
ip address 172.16.1.62 255.255.255.0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
ip forward-protocol nd
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius server 172.16.50.99
address ipv4 172.16.50.99 auth-port 1645 acct-port 1646
key 7 104A1D0A4B141D06421224
bridge 1 route ip
line con 0
logging synchronous
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
transport input ssh
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
transport input ssh
end
This is My Logfile on Radius Win 2008 :
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: S-1-5-21-858235673-3059293199-2272579369-1162
Account Name: xxxxxxxxxxxxxxxx
Account Domain: xxxxxxxxxxx
Fully Qualified Account Name: xxxxxxxxxxxxxxxxxxx
Client Machine:
Security ID: S-1-0-0
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: -
Calling Station Identifier: -
NAS:
NAS IPv4 Address: 172.16.1.62
NAS IPv6 Address: -
NAS Identifier: Aironet2702i
NAS Port-Type: Async
NAS Port: -
RADIUS Client:
Client Friendly Name: Aironet2702i
Client IP Address: 172.16.1.62
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: DTSWIRELESS
Authentication Provider: Windows
Authentication Server: xxxxxxxxxxxxxx
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 66
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
So i will explain problems what i have seen:
SSID: DTS-Group using authentication EAP with RADIUS and it working great (Authentication Type from Aironet to RADIUS is PEAP)
SSID:L6-Webauthen-test using web-auth and i had try to compare with RADIUS but ROOT CAUSE is AUTHENTICATION TYPE from Aironet to RADIUS default is PAP. (Reason Code : 66)
=> I had trying to find how to change Authentication Type of Web-Auth on Cisco Aironet from PAP to PEAP or sometime like that for combine with RADIUS.
Any idea or recommend for me ?
Thanks for see my caseHi Dhiresh Yadav,
Many thanks for your reply me,
I will explain again for clear my problems.
At this case, i had setup complete SSID DTS-Group use authentication with security as PEAP combine Radius Server running on Window 2008.
I had login SSID by Account create in AD => It's work okay with me. Done
Problems occurs when i try to use Web-authentication on Vlan45 With SSID :
dot11 ssid L6-Webauthen-test
vlan 45
web-auth
authentication open
dot1x eap profile DTSGROUP
mbssid guest-mode
After configured on Aironet and Window Radius , i had try to login with Account create in AD by WebBrowser but it Fail ( i have see mini popup said: Authentication Fail" . So i go to Radius Server and search log on EventViewer.
This is My Logfile on Radius Win 2008 :
Network Policy Server denied access to a user.
NAS:
NAS IPv4 Address: 172.16.1.62
NAS IPv6 Address: -
NAS Identifier: Aironet2702i
NAS Port-Type: Async
NAS Port: -
RADIUS Client:
Client Friendly Name: Aironet2702i
Client IP Address: 172.16.1.62
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: DTSWIRELESS
Authentication Provider: Windows
Authentication Server: xxxxxxxxxxxxxx
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 66
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
Im think ROOT CAUSE is :
PAP is the default authentication type for web-auth users on Aironet 2702i, so it can't combine with Radius Window 2008 because they just support PEAP (CHAPv1,CHAPv2....) => Please give me a tip how to change Authentication Type from PAP to PEAP for Web Authentication on Aironet -
Wireless Mac-Adress Filtering via Radius Bypassed
Hello
i have two Mac-adress based filtered WLAN configured plus one Guest SSID.
The mac-adress filtering is linked to a radius server faut mac verification
When i enable Fast-SSID change (globally for controller) i can switch from guest ssid to mac-filtered SSID without radius validation of my mac.
If i disable fast-SSId change, i cannot switch between, and radius return reject for my MAC@
the problem is i have some iPhones switching between two SSID --> i have to leav Fast-SSID change activated, if not iPhones can't connect to SSIDs ...
( as stated in : https://supportforums.cisco.com/docs/DOC-21729 )
My version : 7.2.103.0
Does anybody can confirm this problem ?
Thanks,
regards,
Guillaumeyou're hitting this bug, update to fixed code.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCub00341 -
SG300: MAC authentication with Radius VLAN assignment problems
Hi,
I just can't get the dynamic vlans working. I've tried everything, switch in L3 mode, switch in L2, several port configs, several tunnel configs in Radius server (freeradius 2.1.1)
Here's the final switch config:
config-file-header
switchf460dc
v1.3.7.18 / R750_NIK_1_35_647_358
CLI v1.0
set system mode switch
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
no spanning-tree
vlan database
vlan 12,100,110,666
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
dot1x system-auth-control
no bonjour enable
hostname switchf460dc
line ssh
exec-timeout 0
exit
encrypted radius-server host 192.168.99.93 key xXx priority 1 usage dot1.x
logging host 1.2.3.4 severity debugging
passwords aging 0
ip ssh server
snmp-server server
snmp-server community public ro 192.168.99.93 view Default
clock timezone " " +1
clock summer-time web recurring eu
clock source sntp
sntp unicast client enable
sntp server 172.16.1.1
interface vlan 12
ip address 192.168.99.170 255.255.255.0
no ip address dhcp
interface gigabitethernet5
dot1x host-mode multi-sessions
dot1x reauthentication
dot1x authentication mac
dot1x radius-attributes vlan static
dot1x port-control auto
switchport mode general
switchport general allowed vlan add 100,110,666 untagged
no macro auto smartport
interface gigabitethernet6
switchport mode access
switchport access vlan 110
interface gigabitethernet9
switchport mode access
switchport access vlan 12
interface gigabitethernet10
switchport trunk allowed vlan add 12,100,110
exit
ip default-gateway 192.168.99.1
On the switch side I would expect VLAN 666 to be set but it's not there:
switchf460dc#show dot1x users
MAC Auth Auth Session VLAN
Port Username Address Method Server Time
gi5 0090dca15880 00:90:dc:a1:58:80 MAC Remote 01:09:25
This is the radius users file. It's a simple file for test.
DEFAULT Auth-Type := Accept
Tunnel-Type = VLAN,
Tunnel-Medium-Type = IEEE-802,
Tunnel-Private-Group-Id = 666
I am attaching a screenshot of the Radius reply sent by the server.
I also tried setting "copy_request_to_tunnel = yes" and "use_tunneled_reply = yes" as found in another post, no success.
It may be that the tag is missing in the Radius reply? If yes, how do I add it?
Any ideas?
Thanks.
Update Dec 11: I tried with FW 1.4.0, and using the same config the switch doesn't perform any Radius requests at all anymore.I was wrong when I said that 1.4.0 wouldn't work at all. I simply had a device connected which didn't produce much traffic. My bad.
So 1.4.0 works as far as the auth is concerned, but no improvement as far as dynamic VLAN is concerned. So there is no improvement over 1.3.7, or there is a config issue.
I have opened SR 633001533 although the last appointment for WebEx went by without anyone getting back to me. I'll try again on Monday.
Feel free to get back to me if you need anything to make experiments. I'll keep this thread updated too. -
Issue with authentication with RADIUS when using VPN
Our customer has a problem with auhtentication against Radius vhen he is using VPN or SSL VPN. Authentication on SSH or TELNET via RADIUS is working fine . When I configure on VPN (and SSL VPN) authentication against the local database, everything is working fine and tunnel is established.
In attachement is running-config of customer's gateway and capture file of communication between RADIUS server and gateway (radius access request starting at 85th line).
I found in this file at AVP attributes that the gateway is sending ipsec profile name (in this case "VPN") instead of username.SSLVPN is configured to use the local database of usernames only in this config. It is not configured to use RADIUS.
-
IEEE 802.1x Authentication with RADIUS failed
Hello guys,
I've a little strange Situation.
If user start his Computer (Windows 7 enterprise) and computer is connected via LAN it works fine.
If user start his Computer (Windows 7 enterprise) and computer is connected via WLAN it works also fine.
But if user start his Computer (Windows 7 enterprise) that is connected via LAN it is not more possible to connect to WLAN (parallel). I've implemented an IEEE 802.1 RADIUS authenticiation.
It does not work with this special user account. I've tested it already successful with couple other accounts.
Does someone has experience with such Situation?
Regards
RodikIt does not work with this special user account. I've tested it already successful with couple other accounts.
Hi,
Did you mean that this problem just occures to the single User Account but others works fine at same computer, isn't it?
When it connect Wlan failed, is there any error message? Have you tried to reinstall the WLan device driver for test?
it would be better to provide more details about the Wlan connect failed.
Roger Lu
TechNet Community Support -
Web authentication with Radius server problem
Hello,
I'm having problem to web authenticate users via radius server for one WLC. Here is the outpu from WLC:
*emWeb: Mar 26 14:17:31.537: 20:7d:xx:xx:d8:f0 Username entry (aaaaaa) created for mobile, length = 7
*emWeb: Mar 26 14:17:31.537: 20:7d:xx:xx:d8:f0 Username entry (aaaaaa) created in mscb for mobile, length = 7
*aaaQueueReader: Mar 26 14:17:31.537: Unable to find requested user entry for aaaaaa
*aaaQueueReader: Mar 26 14:17:31.537: ReProcessAuthentication previous proto 8, next proto 1
*aaaQueueReader: Mar 26 14:17:31.537: AuthenticationRequest: 0x1e08eb94
*aaaQueueReader: Mar 26 14:17:31.538: Callback.....................................0x10908d90
*aaaQueueReader: Mar 26 14:17:31.538: protocolType.................................0x00000001
*aaaQueueReader: Mar 26 14:17:31.538: proxyState...................................20:7D:xx:xx:D8:F0-00:00
*aaaQueueReader: Mar 26 14:17:31.538: Packet contains 11 AVPs (not shown)
*aaaQueueReader: Mar 26 14:17:31.538: apfVapRadiusInfoGet: WLAN(1) dynamic int attributes srcAddr:0x0, gw:0x0, mask:0x0, vlan:0, dpPort:0, srcPort:0
*aaaQueueReader: Mar 26 14:17:31.538: 20:7d:xx:xx:d8:f0 Successful transmission of Authentication Packet (id 67) to 10.xx.33.249:1645, proxy state 20:7d:xx:xx:d8:f0-00:01
*aaaQueueReader: Mar 26 14:17:31.538: 00000000: 01 43 00 8c 48 7c a7 ff df 06 53 30 c0 be e1 8e .C..H|....S0....
*aaaQueueReader: Mar 26 14:17:31.538: 00000010: d7 fd 8b d3 01 09 73 65 66 72 73 76 65 02 12 7b ......aaaaaa..{
*aaaQueueReader: Mar 26 14:17:31.538: 00000020: ae 2e f5 eb fa cf f5 cc 3b 08 65 d7 04 0e ba 06 ........;.e.....
*aaaQueueReader: Mar 26 14:17:31.538: 00000030: 06 00 00 00 01 04 06 0a 2e 09 14 05 06 00 00 00 ................
*aaaQueueReader: Mar 26 14:17:31.538: 00000040: 0d 20 0d 73 65 76 73 74 2d 6c 77 63 31 30 3d 06 ...xxxxx-lwc10=.
*aaaQueueReader: Mar 26 14:17:31.538: 00000050: 00 00 00 13 1a 0c 00 00 37 63 01 06 00 00 00 01 ........7c......
*aaaQueueReader: Mar 26 14:17:31.538: 00000060: 1f 0e 31 39 32 2e 31 36 38 2e 31 2e 36 31 1e 0c ..192.168.1.61..
*aaaQueueReader: Mar 26 14:17:31.538: 00000070: 31 30 2e 34 36 2e 39 2e 32 30 50 12 95 11 7c d9 10.xx.9.20P...|.
*aaaQueueReader: Mar 26 14:17:31.538: 00000080: 75 8e 01 6e bf 62 38 f8 38 ab 68 4a u..n.b8.8.hJ
*radiusTransportThread: Mar 26 14:17:31.603: 00000000: 03 43 00 14 e5 8c e7 75 52 04 af e0 07 b7 fb 96 .C.....uR.......
*radiusTransportThread: Mar 26 14:17:31.603: 00000010: c1 4a fb 40 .J.@
*radiusTransportThread: Mar 26 14:17:31.603: ****Enter processIncomingMessages: response code=3
*radiusTransportThread: Mar 26 14:17:31.603: ****Enter processRadiusResponse: response code=3
*radiusTransportThread: Mar 26 14:17:31.603: 20:7d:xx:xx:d8:f0 Access-Reject received from RADIUS server 10.xx.33.249 for mobile 20:7d:xx:xx:d8:f0 receiveId = 0
*radiusTransportThread: Mar 26 14:17:31.603: ReProcessAuthentication previous proto 1, next proto 2
*radiusTransportThread: Mar 26 14:17:31.603: AuthenticationRequest: 0x1da9fa4c
*radiusTransportThread: Mar 26 14:17:31.603: Callback.....................................0x10908d90
*radiusTransportThread: Mar 26 14:17:31.603: protocolType.................................0x00000002
*radiusTransportThread: Mar 26 14:17:31.603: proxyState...................................20:7D:xx:xx:D8:F0-00:00
*radiusTransportThread: Mar 26 14:17:31.603: Packet contains 11 AVPs (not shown)
*radiusTransportThread: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Returning AAA Error 'No Server' (-7) for mobile 20:7d:xx:xx:d8:f0
*radiusTransportThread: Mar 26 14:17:31.605: AuthorizationResponse: 0x2dd03648
*radiusTransportThread: Mar 26 14:17:31.605: structureSize................................32
*radiusTransportThread: Mar 26 14:17:31.605: resultCode...................................-7
*radiusTransportThread: Mar 26 14:17:31.605: protocolUsed.................................0x00000002
*radiusTransportThread: Mar 26 14:17:31.605: proxyState...................................20:7D:xx:xx:D8:F0-00:00
*radiusTransportThread: Mar 26 14:17:31.605: Packet contains 0 AVPs:
*emWeb: Mar 26 14:17:31.605: Authentication failed for aaaaaa
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Username entry deleted for mobile
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Plumbing web-auth redirect rule due to user logout
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 192.168.1.61 WEBAUTH_REQD (8) Deleting mobile policy rule 42461
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Adding Web RuleID 42464 for mobile 20:7d:xx:xx:d8:f0
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Web Authentication failure for station
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 192.168.1.61 WEBAUTH_REQD (8) Reached ERROR: from line 5069
That was pretty clear for me that Radius is refusing to give user access.
Fully-Qualified-User-Name = NMEA\aaaaaa
NAS-IP-Address = 10.xx.9.20
NAS-Identifier = xxxxx-lwc10
Called-Station-Identifier = 10.xx.9.20
Calling-Station-Identifier = 192.168.1.61
Client-Friendly-Name = YYY10.xx
Client-IP-Address = 10.xx.9.20
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 13
Proxy-Policy-Name = Use Windows authentication forall users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = YYYYY Wireless Users
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 66
Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy
That output is from WLC 5508 version 7.0.235
What is strange, that user was able to authenticate from other before refresh WLC 4402 ver 4.2.207. I cannot change WLC because of AP which cannot run old version.
this is output from working client connection from old WLC
NAS-IP-Address = 10.xx.9.13
NAS-Identifier = xxxxx-lwc03
Client-Friendly-Name = YYY10.46
Client-IP-Address = 10.xx.9.13
Calling-Station-Identifier = 192.168.19.246
NAS-Port-Type = <not present>
NAS-Port = <not present>
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = YYYYY Wireless Guest Access
Authentication-Type = PAP
EAP-Type = <undetermined>
I know there is different Policy Name used, but my question is why it is not using the same as on old WLC when configuration is same.
Is there any way I can force users to use different policy from WLC or AP configuration or is this solely configuration of Radius?
Is it maybe problem of version 7.0.235?
Any toughts would be much appriciated.Scott,
You are probably right. The condition that is checked for the first policy name (we have 2) is to match
NAS-Port-Type = Wireless - IEEE 802.11, and this is basically used to differentiate guests from other company users.
as you can see from the logs the one that is working correctly is not sending NAS-Port-Type. The question is why.
As I said before.
WLC 5508 ver. 7.0.235 is sending NAS-Port-Type
WLC 4402 ver. 4.2.207 is not.
The same user was working OK on 4402 WLC and after refresh and associating APs to 5508 it all broke, so client did not changed anything on adapter. -
AAA authentication with RADIUS
Hi,
aaa authentication login user-list group radius local
radius-server host 10.1.1.3 auth-port 1645 acct-port 1646 key xxxx
radius-server deadtime 10
If i add more radius-server host such as
radius-server host 10.1.1.4 auth-port 1645 acct-port 1646 key xxxx
1. Server 10.1.1.4 will be backup for server 10.1.1.3?
2. Can i configure to be radius group?
ThanksHi,
you can try the following:
Router(config)# aaa group server radius
Router(config-sg radius)# server 10.1.1.3
Router(config-sg radius)# server 10.1.1.4
when you configure the aaa group like this 10.1.1.3 will be primary and 10.1.1.4 is secondary
Hope this helps.
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts. -
ISE mab authentication with Avaya/Nortel switches
Currently using Cisco ISE 1.1 to authentication both dot1x and mab from Cisco switches. Both features are authenticating properly.
When we use a Nortel/Avaya switch for the authenticator, we are unable to authenticate using mac bypass (non-eap (or neap) in Avaya talk..). The correct authentication policy is found in the ISE, but the mac address is not found in the database. We know it is there because the same mac is authenticating with the Cisco switch. Dot1x authenticates properly from both the Cisco and Avaya authenticators.
Could this be an issues with the username/password format in the Radius packet from the Cisco?
Thanks in advance for any assistance.
-KurtAs requested...
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fet
chBugDetails&bugId=CSCuc22732
MAB works from a cisco switch because the cisco switch places the mac address in the calling-station-attribute and the user-name attribute. The Cisco ISE platform is looking at the calling-station attribute to find the user name.This is the problem.
The radius RFC says the user name must be in the user-name attribute. The calling-station-attribute is not a required field and is used for the phone number of a voip phone. Basically, the ISE platform is looking at the wrong field for the mac address. -
Guys,
I just want to know. Can I use the MAC Address Authentication without RADIUS server to join the SSID in my Aironet 1242?
I am using Autonomous mode.
Thank you very much for your attention.
Regards,
EdwinEdwin,
Yes I believe you can.
I am not familar with all the methods available, but I have used these methods in the past.
1. This method applies the MAC address filtering globally across all dot11 interfaces on the device.
dot11 association mac-list 700
access-list 700 permit mac.address address.mask
2. This method applies the MAC address filtering on a per interface basis, and requires bridging.
interface Dot11Radio0.x
bridge-group x input-address-list 700
access-list 700 permit mac.address address.mask
3. MAC Address Authentication to the Network - This method is best described in the following document.
http://www.cisco.com/en/US/docs/routers/access/wireless/software/guide/SecurityAuthenticationTypes.html#wp1034875
Method #3 may not be supported in certain IOS versions on certain platforms.
Others may know of additional methods, and/or correct any errors In the information I have presented here.
Hope this may be of help to you.
regards -
Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points
Hi Guys,
I would like to go for "Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points 1300". I want the AP to broadcast only 1 SSID. The client find the SSID ->put in his user credential->Raudius athentication->assign him to an specific vlan based on his groupship.
The problem here is that I don't have a AP controller but only configurable Aironet Access Points 1300. I can connect to the radius server, but I am not sure how to confirgure the AP's port, radio port, vlan and SSID.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
I go through some references:
3.5 RADIUS-Based VLAN Access Control
As discussed earlier, each SSID is mapped to a default VLAN-ID on the wired side. The IT administrator may wish to impose back end (such as RADIUS)-based VLAN access control using 802.1X or MAC address authentication mechanisms. For example, if the WLAN is set up such that all VLANs use 802.1X and similar encryption mechanisms for WLAN user access, then a user can "hop" from one VLAN to another by simply changing the SSID and successfully authenticating to the access point (using 802.1X). This may not be preferred if the WLAN user is confined to a particular VLAN.
There are two different ways to implement RADIUS-based VLAN access control features:
1. RADIUS-based SSID access control: Upon successful 802.1X or MAC address authentication, the RADIUS server passes back the allowed SSID list for the WLAN user to the access point or bridge. If the user used an SSID on the allowed SSID list, then the user is allowed to associate to the WLAN. Otherwise, the user is disassociated from the access point or bridge.
2. RADIUS-based VLAN assignment: Upon successful 802.1X or MAC address authentication, the RADIUS server assigns the user to a predetermined VLAN-ID on the wired side. The SSID used for WLAN access doesn't matter because the user is always assigned to this predetermined VLAN-ID.
extract from: Wireless Virtual LAN Deployment Guide
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html
==============================================================
Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
==============================================================
Controller: Wireless Domain Services Configuration
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml
Any help on this issue is appreicated.
Thanks.I'm not sure if the Autonomous APs have the option for AAA Override. On the WLC, I can go into the BSSID, Security, Advanced, and there's a checkbox that I would check to allow a Radius server to send back the VLAN.
I did a little research and it looks like the 1300 may give this option but instead is defined as "VLAN Override". I've found the release notes for 12.3(7)JA5 (not sure what version you're running) that give mention and a link to configuring EAP on page 4: http://www.ciscosystems.ch/en/US/docs/wireless/access_point/1300/release/notes/o37ja5rn.pdf
Hope this helps -
WPA with local MAC address authentication
Can Cisco Aironet AP support WPA encryptions with local MAC address authentications as the current setup i have do not have a radius server to authenticate my users.
i tried configuring with local MAC address but no success.Try this:
conf t
access-list 700 deny xxxx.xxxx.xxxx 0000.0000.0000
access-list 700 deny xxxx.xxxx.xxxx 0000.0000.0000
access-list 700 permit 0000.0000.0000 ffff.ffff.ffff
dot11 association mac-list 700
Replace the xxxx.xxxx.xxxx with each host you want to allow on the AP. This will block any other MACs from accessing the AP. This is not by SSID, this is by AP, so let me know if this will work for you. -
ASA , Cisco VPN client with RADIUS authentication
Hi,
I have configured ASA for Cisco VPN client with RADIUS authentication using Windows 2003 IAS.
All seems to be working I get connected and authenticated. However even I use user name and password from Active Directory when connecting with Cisco VPN client I still have to provide these credentials once again when accessing domain resources.
Should it work like this? Would it be possible to configure ASA/IAS/VPN client in such a way so I enter user name/password just once when connecting and getting access to domain resources straight away?
Thank you.
Kind regards,
AlexHi Alex,
It is working as it should.
You can enable the vpn client to start vpn before logon. That way you login to vpn and then logon to the domain. However, you are still entering credentials twice ( vpn and domain) but you have access to domain resources and profiles.
thanks
John -
Radius authentication with ISE - wrong IP address
Hello,
We are using ISE for radius authentication. I have setup a new Cisco switch stack at one of our locations and setup the network device in ISE. Unfortunately, when trying to authenticate, the ISE logs show a failure of "Could not locate Network Device or AAA Client" The reason for this failure is the log shows it's coming from the wrong IP address. The IP address of the switch is 10.xxx.aaa.241, but the logs show it is 10.xxx.aaa.243. I have removed and re-added the radius configs on both ISE and the switch, but it still comes in as .243. There is another switch stack at that location (same model, IOS etc), that works properly.
The radius config on the switch:
aaa new-model
aaa authentication login default local
aaa authentication login Comm group radius local
aaa authentication enable default enable
aaa authorization exec default group radius if-authenticated
ip radius source-interface Vlanyy
radius server 10.xxx.yyy.zzz
address ipv4 10.xxx.yyy.zzz auth-port 1812 acct-port 1813
key 7 abcdefg
The log from ISE:
Overview
Event 5405 RADIUS Request dropped
Username
Endpoint Id
Endpoint Profile
Authorization Profile
Authentication Details
Source Timestamp 2014-07-30 08:48:51.923
Received Timestamp 2014-07-30 08:48:51.923
Policy Server ise
Event 5405 RADIUS Request dropped
Failure Reason 11007 Could not locate Network Device or AAA Client
Resolution Verify whether the Network Device or AAA client is configured in: Administration > Network Resources > Network Devices
Root cause Could not find the network device or the AAA Client while accessing NAS by IP during authentication.
Username
User Type
Endpoint Id
Endpoint Profile
IP Address
Identity Store
Identity Group
Audit Session Id
Authentication Method
Authentication Protocol
Service Type
Network Device
Device Type
Location
NAS IP Address 10.xxx.aaa.243
NAS Port Id tty2
NAS Port Type Virtual
Authorization Profile
Posture Status
Security Group
Response Time
Other Attributes
ConfigVersionId 107
Device Port 1645
DestinationPort 1812
Protocol Radius
NAS-Port 2
AcsSessionID ise1/186896437/1172639
Device IP Address 10.xxx.aaa.243
CiscoAVPair
Steps
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
11007 Could not locate Network Device or AAA Client
5405
As a test, I setup a device using the .243 address. While ISE claims it authenticates, it really doesn't. I have to use my local account to access the device.
Any advice on how to resolve this issue would be appreciated. Please let me know if more information is needed.Well from the debug I would say there may be an issue with the addressing of the radius server on the switch.
radius-server host 10.xxx.xxx.xxx key******** <--- Make sure this address and Key matches what you have in ISE PSN and that switch. Watch for spaces in your key at the begining or end of the string.
What interface should your switch be sending the radius request?
ip radius source-interface VlanXXX vrf default
Here is what my debug looks like when it is working correctly.
Aug 4 15:58:47 EST: RADIUS/ENCODE(00000265): ask "Password: "
Aug 4 15:58:47 EST: RADIUS/ENCODE(00000265):Orig. component type = EXEC
Aug 4 15:58:47 EST: RADIUS(00000265): Config NAS IP: 10.xxx.xxx.251
Aug 4 15:58:47 EST: RADIUS/ENCODE(00000265): acct_session_id: 613
Aug 4 15:58:47 EST: RADIUS(00000265): sending
Aug 4 15:58:47 EST: RADIUS(00000265): Send Access-Request to 10.xxx.xxx.35:1645 id 1645/110, len 104
Aug 4 15:58:47 EST: RADIUS: authenticator 97 FB CF 13 2E 6F 62 5D - 5B 10 1B BD BA EB C9 E3
Aug 4 15:58:47 EST: RADIUS: User-Name [1] 9 "admin"
Aug 4 15:58:47 EST: RADIUS: Reply-Message [18] 12
Aug 4 15:58:47 EST: RADIUS: 50 61 73 73 77 6F 72 64 3A 20 [ Password: ]
Aug 4 15:58:47 EST: RADIUS: User-Password [2] 18 *
Aug 4 15:58:47 EST: RADIUS: NAS-Port [5] 6 3
Aug 4 15:58:47 EST: RADIUS: NAS-Port-Id [87] 6 "tty3"
Aug 4 15:58:47 EST: RADIUS: NAS-Port-Type [61] 6 Virtual [5]
Aug 4 15:58:47 EST: RADIUS: Calling-Station-Id [31] 15 "10.xxx.xxx.100"
Aug 4 15:58:47 EST: RADIUS: Service-Type [6] 6 Login [1]
Aug 4 15:58:47 EST: RADIUS: NAS-IP-Address [4] 6 10.xxx.xxx.251
Aug 4 15:58:47 EST: RADIUS(00000265): Started 5 sec timeout
Aug 4 15:58:47 EST: RADIUS: Received from id 1645/110 10.xxx.xxx.35:1645, Access-Accept, len 127
Aug 4 15:58:47 EST: RADIUS: authenticator 1B 98 AB 4F B1 F4 81 41 - 3D E1 E9 DB 33 52 54 C1
Aug 4 15:58:47 EST: RADIUS: User-Name [1] 9 "admin"
Aug 4 15:58:47 EST: RADIUS: State [24] 40
Aug 4 15:58:47 EST: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 61 [ReauthSession:0a]
Aug 4 15:58:47 EST: RADIUS: 30 63 66 65 32 33 30 30 30 31 46 37 30 37 35 33 [0cfe230001F70753]
Aug 4 15:58:47 EST: RADIUS: 44 46 45 35 46 37 [ DFE5F7]
Aug 4 15:58:47 EST: RADIUS: Class [25] 58
Aug 4 15:58:47 EST: RADIUS: 43 41 43 53 3A 30 61 30 63 66 65 32 33 30 30 30 [CACS:0a0cfe23000]
Aug 4 15:58:47 EST: RADIUS: 31 46 37 30 37 35 33 44 46 45 35 46 37 3A 50 52 [1F70753DFE5F7:PR]
Aug 4 15:58:47 EST: RADIUS: 59 49 53 45 30 30 32 2F 31 39 33 37 39 34 36 39 [YISE002/19379469]
Aug 4 15:58:47 EST: RADIUS: 38 2F 32 30 36 33 31 36 [ 8/206316]
Aug 4 15:58:47 EST: RADIUS(00000265): Received from id 1645/110
---------------------------------------------------------------------------------------------------------------This is after I added the incorrect Radius server address.
Aug 4 16:05:19 EST: RADIUS/ENCODE(00000268): ask "Password: "
Aug 4 16:05:19 EST: RADIUS/ENCODE(00000268):Orig. component type = EXEC
Aug 4 16:05:19 EST: RADIUS(00000268): Config NAS IP: 10.xxx.xxx.251
Aug 4 16:05:19 EST: RADIUS/ENCODE(00000268): acct_session_id: 616
Aug 4 16:05:19 EST: RADIUS(00000268): sending
Aug 4 16:05:19 EST: RADIUS(00000268): Send Access-Request to 10.xxx.xxx.55:1645 id 1645/112, len 104
Aug 4 16:05:19 EST: RADIUS: authenticator FC 94 BA 5D 75 1F 84 08 - E0 56 05 3A 7F BC FB BB
Aug 4 16:05:19 EST: RADIUS: User-Name [1] 9 "admin"
Aug 4 16:05:19 EST: RADIUS: Reply-Message [18] 12
Aug 4 16:05:19 EST: RADIUS: 50 61 73 73 77 6F 72 64 3A 20 [ Password: ]
Aug 4 16:05:19 EST: RADIUS: User-Password [2] 18 *
Aug 4 16:05:19 EST: RADIUS: NAS-Port [5] 6 7
Aug 4 16:05:19 EST: RADIUS: NAS-Port-Id [87] 6 "tty7"
Aug 4 16:05:19 EST: RADIUS: NAS-Port-Type [61] 6 Virtual [5]
Aug 4 16:05:19 EST: RADIUS: Calling-Station-Id [31] 15 "10.xxx.xxx.100"
Aug 4 16:05:19 EST: RADIUS: Service-Type [6] 6 Login [1]
Aug 4 16:05:19 EST: RADIUS: NAS-IP-Address [4] 6 10.xxx.xxx.251
Aug 4 16:05:19 EST: RADIUS(00000268): Started 5 sec timeout
Aug 4 16:05:23 EST: RADIUS(00000268): Request timed out
Aug 4 16:05:23 EST: RADIUS: Retransmit to (10.xxx.xxx.55:1645,1646) for id 1645/112
Aug 4 16:05:23 EST: RADIUS(00000268): Started 5 sec timeout
Aug 4 16:05:29 EST: RADIUS(00000268): Request timed out
Aug 4 16:05:29 EST: RADIUS: Retransmit to (10.xxx.xxx.55:1645,1646) for id 1645/112
Aug 4 16:05:29 EST: RADIUS(00000268): Started 5 sec timeout
Aug 4 16:05:33 EST: RADIUS(00000268): Request timed out
Aug 4 16:05:33 EST: %RADIUS-4-RADIUS_DEAD: RADIUS server 10.xxx.xxx.55:1645,1646 is not responding.
Aug 4 16:05:33 EST: %RADIUS-4-RADIUS_ALIVE: RADIUS server 10.xxx.xxx.55:1645,1646 is being marked alive.
Aug 4 16:05:33 EST: RADIUS: Retransmit to (10.xxx.xxx.55:1645,1646) for id 1645/112
Aug 4 16:05:33 EST: RADIUS(00000268): Started 5 sec timeout
Aug 4 16:05:38 EST: RADIUS(00000268): Request timed out
Aug 4 16:05:38 EST: RADIUS: Fail-over to (10.xxx.xxx.55:1645,1646) for id 1645/112
Aug 4 16:05:38 EST: RADIUS(00000268): Started 5 sec timeout
Aug 4 16:05:43 EST: RADIUS(00000268): Request timed out
Aug 4 16:05:43 EST: RADIUS: Retransmit to (10.xxx.xxx.55:1645,1646) for id 1645/112
Aug 4 16:05:43 EST: RADIUS(00000268): Started 5 sec timeout
Aug 4 16:05:48 EST: RADIUS(00000268): Request timed out
Aug 4 16:05:48 EST: RADIUS: Retransmit to (10.xxx.xxx.55:1645,1646) for id 1645/112
Aug 4 16:05:48 EST: RADIUS(00000268): Started 5 sec timeout
Aug 4 16:05:53 EST: RADIUS(00000268): Request timed out
Aug 4 16:05:53 EST: %RADIUS-4-RADIUS_DEAD: RADIUS server 10.xxx.xxx.55:1645,1646 is not responding.
Aug 4 16:05:53 EST: %RADIUS-4-RADIUS_ALIVE: RADIUS server 10.xxx.xxx.55:1645,1646 is being marked alive.
Aug 4 16:05:53 EST: RADIUS: Retransmit to (10.xxx.xxx.55:1645,1646) for id 1645/112
Aug 4 16:05:53 EST: RADIUS(00000268): Started 5 sec timeout
Aug 4 16:05:57 EST: RADIUS(00000268): Request timed out
Aug 4 16:05:57 EST: RADIUS: No response from (10.xxx.xxx.55:1645,1646) for id 1645/112
Aug 4 16:05:57 EST: RADIUS/DECODE: parse response no app start; FAIL
Aug 4 16:05:57 EST: RADIUS/DECODE: parse response; FAIL
This is a default template I use for all my devices routers or switches hope it helps. I have two PSN's that is why we have two radius-server host commands..
aaa authentication login vty group radius local enable
aaa authentication login con group radius local enable
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting system default start-stop group radius
ip radius source-interface VlanXXX vrf default
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 30 tries 3
radius-server host xxx.xxx.xxx.xxx auth-port 1645 acct-port 1646 key *********
radius-server host xxx.xxx.xxx.xxx auth-port 1645 acct-port 1646 key *********
radius-server vsa send accounting
radius-server vsa send authentication
You can use this in the switch to test radius
test aaa group radius server 10.xxx.xxx.xxx <username> <password>
Maybe you are looking for
-
Help! powerbook won't go to sleep...suffering from insomnia
Hey all, recently i noticed my powerbook has not been going to sleep. i've reset pram,nvram,open firmware, repaired disk permissions, ran cron scripts the whole 9 yards. I checked system logs and i get this: Description: System events log Size: 86 by
-
when im at front row and i play a movie/trailes clip..the whole screen blinks black then appers again it plays the movie/clip for like 3 seconds then blacks out then appers againg?? how do i fix that?? thanks
-
Hi there, Spellcheck has suddenly stopped working in both online and offline modes. Has anyone else had similar issues? I have it selected under view options.
-
Dear Experts, Anyone know which field should I use to do the Active / Inactive item master data via DTW? I'm trying Valid(ValidFor) in OITM table and say "Y" or "N" and import via DTW. It imported succesfully but dit not update in the front end on SA
-
Hyperion Planning - extract text from Planning
We have an account with the following properties: Account Type: SavedAssumption Data Type: Text We need to extract the text that is captured on the account. The data form we created works but is to big for SmartView and extracting it with Ad-hock Ana