Mac Air not detecting NEC Mutlisync LCD display

Mac Air is not detecting an additional display. Any ideas?

same problem w/macbook air 13" with snow leop. minidisplay to dvi acer 24" external... intermittent the external won't wake up. After much research I see others have the same problem and no answers except: 1. plug/unplug dvi, 2. reset to sleep and rewake up -
This maybe connected to the monitor not auto detecting which input is connected after wake.  from what I see it's no better w/Lion or Mt Lion

Similar Messages

  • My mac is not detecting external microphone from headphone

    my mac is not detecting external microphone from headphone

    If your headphone doesn't work on your mac then I suggest you try this:
    1.  Is it plugged in properly?  Don't try pushing it in hard. Thatis likely to break something
    2.  Call up Systems => Sounds then select the Output tab.  Do you see your headphones as an output option?  You should see "Headphones"   Headphone Output".  If you don't see it then you either have a software or a hardware problem.  Don't panic yet
    3.  Leave the headphone plugged in.  Close all your apps and shutdown the mac.  Press the power button to restart.  Hold down the following 4 keys:  ALT CMD P R   this could also be OPTION COMMAND P R
    The mac screen should go blank and should restart again.  When you've logged in, call up SYSTEMS => SOUNDS again.  Check if you can see the headphone source this time.  If you can't, now is the time to panic.  You've reset your PRAM and it hasn't made a difference, so you probably have got a hardware problem.

  • Mac air not sending email smtpout not responding

    mac air not sending emails

    Problem fixed by restoring Mail preference "plist" to a earlier date prior to the problem.  I may never know what went wrong. 
    Chuck

  • Mac Pro not Detecting Bootable USB Drive to Install Snow Leopard 10.6

    Hi
    I have to Mac Pro 2 x 2.8 GHz Intel Xeon. I have been running Leopard on them. I wish to install snow leopard, so i took out my USB HDD where I have made a Bootable Partition with snow leopard. I have used this in the past on all my machines to install snow leopard. Now when I try to install Snow Leopard from this on my mac pro, it does not detect in the "Option Boot" start up menu, it only shows my leopard disk. If I got to start up disk in system preference, then it shows my Snow Leopard disk, but when i select that as start up, it still boots to my Leopard..
    Since I am doing a fresh Install , I have another HDD installed, formatted for snow leopard. When I launch snow leopard installer from Leopard and select install in the new drive, it does some installation , but when restarting  it goes to my leopard again.
    This is the case on both the Mac Pro;s, but not on my laptops, I tried on my air and my macbook pro, and my friends mac book pro, it instantly boots up to the usb drive with snow leopard.
    So is there anything im missing ? Or is there something wrong with my Mac Pro's?
    I dont have the snow leopard DVD, else I would have tried that too..
    Please advice asap!!
    Thanks
    Sa1

    Hey
    Thanks for the reply!
    I have two USB HDD, with the copy from snow leopard dvd, and both are formatted in GUID, they work fine on my laptops and even the old mac mini, just not working on two identical Mac Pros.. Its very strange, as it keeps booting to leopard, and if I remove leopard Disk, and just put the new one and connect the USB dive, its shows a folder with a "?" mark sign!
    And the USB just works fine after its booted to leopard, it even starts installing snow leopard to the disk i assign, but it does not complete the installation as it boots to main leopard drive..
    I have tried to reset PRAM on both machine, I have changed usb slot..
    I dont know what to do!

  • Keyboard, Trackpad and USB on Mac Air not working with latest OS update

    My 2009 Mac Air after the last OS update, the only thing that seems to work now is the power button. The USB port, Keyboard and trackpad all dead. Help!

    Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • I just bought an airport express and I am in the process of configuring but my mac does not detect any airport devise. internet is working wirelessly and the airport is plugged next to the mac. any clue how can I fix this?

    I just bought an airport express but when trying to configure it my mac is not capable of detecting the devise. The airport is plugged right next to the modem and the wireless internet is running perfectly. does any one experience this before?

    You don't mention what function you want the AirPort Express to accomplish.
    If you are trying to configure it to "join" your existing wireless network, you need to know the exact type of security that your wireless network is using fo you can use that same information to provide the correct settings to the AirPort Express.
    You may be getting a message that the settings have been stored successfully, but unfortunately the settings that you have provided to the Express are likely the wrong settings.
    The only way that you really know if the settings that you entered were correct is if you get a green light 20-30 seconds after you click Update.  If you don't get a green light on the Express, the settings that you provided were not the correct settings.
    When you click Update, the Express will "disappear". This is normal. Up until the time that you click update, AirPort Utility is communicating to the Express on a wireless network with a name like Apple Network xxxxxxx. As soon as you click Update, the Express switches (or tries to switch) to another network, so of course it will disappear from the AirPort Utility window.
    As soon as you click Update, close AirPort Utility. There is no reason to keep watching a window when the Express will never appear.

  • My Mac air not connecting to wi fi

    My Mac air will not connect to wifi. Router ok. Desk top and iPad all connect without difficulty. Air worl in other locations.  Can I delete router and reboot. If so how?

    It did briefly once, but now Airport just says "scanning" all the time. I'm plugged in via ethernet usually which continues to work fine. My wireless network is also visible and working fine to my 2 iMacs, iPhone and (non Apple) laptop. No error messages, just can't see the wireless network. The network has WEP security. I tried switching it off but that didn't make any difference.

  • Mac Air not supporting iPhotos

    Just updated ios8 on iPad and phone and both seem to have worked. Did the same on my mac air (version 10.9.5.) and now I cannot access my photos on the laptop. Message comes up saying iPhotos not supported by the mac. What have I done wrong and how do I correct it? Thanks for advice in advance.

    Did the same on my mac air (version 10.9.5.) and now I cannot access my photos on the laptop. Message comes up saying iPhotos not supported by the mac
    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1
    WARNING:  If you use iTunes to sync photos between your iPhone or iPad and your Mac do not activate the iCloud Drive. Doing so will kill the capability of using iTunes to sync with your mobile device. 
    Also it will disable Documents & Data syncing for your iCloud account on OS X Mavericks and earlier Macs, as well as iOS 7 and earlier devices.

  • Macbook air not detecting home wifi but detecting all other networks in vicinity. Other devices are able to connect to home network.

    I have had this problem since yesterday. My macbook air is not detecting the home wifi network it used to be connected to. A manual addition of the network is also not working. I also tried using network utility which gives the details of all networks available and their details, but the home network does not feature there.
    However, my iPhone is able to connect to the home wifi without a glitch. I am right now using a mobile data card to access internet, but need to get back to the home network.
    I found various users posting the same problem online, but am yet to find a conclusive problem. Here are two threads on apple support which are similar to my case.
    https://discussions.apple.com/thread/2445976?threadID=2445976
    https://discussions.apple.com/message/10695921?messageID=10695921&start=1#106959 21?messageID=10695921&start=1
    Please help!

    It was not working for me either and I spent a day looking at things other people did when they had similar problems. Never could find a conclusive response and what has been suggested here was always almost the only thing mentioned. I wish you luck and hopefully someone can actually point out the one true thing that is doing this!
    This is the exact sequence of events: I switched off the main supply to the house when I was going out, and when I came back this problem occurred. I was searching desperately online and just when I had given up, I decided to switch mains off and then back on. It picked up the wifi, and has been working since. This was a shocker and mostly a coincidence. Wont hurt to try.

  • Mail on mac air not connecting with Gmail

    Hello
    I have a Mac Air and Mail has been working fine but stopped a couple of months ago. Same account still works fine on iPad and iPhone. I have not changed anything like passwords etc.and I can still connect with gmail via safari on this device. Looked at Connection Doctor and internet connection is fine but connection to IMAP and SMTP are saying connection failed and asking to verify username and password. That verification comes up when I first open Mail but the password is not accepted.
    Has anyone else had similar problems.
    Jack

    Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Mac does not detect Blackberry

    My Macbook Pro (Snow Leopard 10.6.8) does not detect my Blackberry Curve 9300 (3G).
    On my phone i'm running OS 6.
    A couple of days ago i installed Blackbery Desktop Software because i wanted a back up of my blackberry.
    But the software did not recognize my phone, neither would my laptop.
    In the past i used to connect my blackberry with my laptop to transfer music, but not with the software, just with finder.
    I remember my phone would ask if i wanted it to connect as a usb station, sync media or just charge it.
    But now it does not ask that anymore. My device charges when i connect it to my Macbook but it doesn't pop up in finder and the Blackberry software doesn't detect it.
    I already reinstalled the software on my mac but it didn't solve the problem, can anyone help me with this?

    Desktop Manager 2.0 is the latest version for Mac.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • APPLE TV doesn't find my IPAD, not may MAC AIR, not my wife's MACBOOK

    I have not been able to wirelessly (wifi) connect any of our APPLE devices to APPLE TV. They don't appear in the menu. I have set my computer to the same ITUNES account of the APPLE TV, I switched off all of the devices and the APPLE TV, unsuccesfully turn on again.
    But I have been able to stream photos (¿?) from my MAC AIR to APPLE TV.

    If each computer uses a different ID and password in homesharing in the iTunes advanced menu, both computers cannot connect to the Apple TV, they need to be the same.
    On the Apple TV under the Settings menu, select 'Computers' (5th option down and enter the same ID and password. If it says 'turn off homesharing' you have already entered an ID and password, but it might be a good idea to turn it off and check you enter exactly the same details as on both computers from the iTunes advanced menu.

  • Mac air not charging?

    my mac air is showing its being charged with the 'plug' icon on top right hand and charging light is orange but the % charged stayed the same for over 10 hours.

    plugged in you have no charge indicator?
    What does the on-screen indicator read? charging? .........% of charge.....etc.
    turn the unit on and unplug and re-attach the magsafe charger connector, ......do you get a light?
    Yes, contact Apple for possible charger replacement and full in shop diagnostic of your Air.

  • Mac Mini not detecting display....please help

    I just bought a mac mini and the plan was to run it through my tv using an HDMI cord. When I go to set things up. I get to the display section in "system preferences" and I started playing around with resolutions to see which would work best with the tv that I have. All the sudden the tv screen went black and now the tv doesn't detect the mac mini through HDMI. After restarting the computer the apple logo would come up and everything would start to boot and then it's like the tv and computer would drop the signal. I don't think that it's something that I done with the resolution.
    I checked and seen that this is a common problem, but I don't know how to fix this problem. Any advice is good advice and I really appreciate it.

    Will that reset the display options?
    David.Austin.Allen wrote:
    This is common if in trying new resolutions you hit upon one that is not compatible with your TV.
    Restart pressing & holding the Shift key until the gray screen with the spinning cogwheel appears. This is a slower startup as the Mac is running self diagnostics. When the Desktop appears go to System Preferences and reset the resolution to the correct setting. Restart normally.
    Dah•veed

  • Mac Book not detecting iPhone 4 wirelessly

    My Mac Book has recently stopped detecting my iPhone wirelessly.  When I first got my iPone, it was detected in the 'devices' section of iTunes, however recently this seems to have stopped working.
    Not sure if this is related, but Vuse has also stopped detecting the playstation in its devices section.  Again, this was detecting the device, but has now stopped doing so.
    Any assistance would be much appreciated- I am quite confused.

    Help here >   iOS: Device not recognized in iTunes for OS X - Apple Support
    Your iPhone to should be recognized in iTunes but not the Finder.

Maybe you are looking for

  • Need Help with a String Binary Tree

    Hi, I need the code to build a binary tree with string values as the nodes....i also need the code to insert, find, delete, print the nodes in the binarry tree plssss... someone pls help me on this here is my code now: // TreeApp.java // demonstrates

  • Get File name from incoming IDoc

    HI All, I am in an IDOC to File scenario using Fcc. (R/3 --> XI --> 3rd party) I need to use the  idoc-number(EDI_DC40-Docnum) as my output file name. I planned using variable substitution but there it expects me to get the idoc number from payload w

  • Synergy on Solaris 10 X86

    I've installed Synergyc (client side app) on my Solaris 10 X86 box. My server is an XP machine. Synergy works great but I'm unable to get in configured for autostart on my Solaris box. I've ran through all the documentation I can find on how to do it

  • Install question & help

    I purchased InDesign back on Oct 26, 2011. I tried to download the software (I was givenn the confirming serial number by ADobe so I have that). numerous times, probably spent over an hour mutliple times and could never get it to download. It's now M

  • PDF Generators for Application Express

    Can anyone make a few recommendations on third party products, etc. that can create pdf reports from Application Express? Thanks, Bob T.