Mac and PC in a network

Is it possible to put my Mac and a PC running Windows 98 in a network in order to share files between the two? Anyone have a setp-by-step guide to do that?
I have an internet connection split between the two, so I already have a router.
Thanks a lot!
Paul

I think the following should help you:
http://docs.info.apple.com/article.html?artnum=151667
http://docs.info.apple.com/article.html?artnum=151669
http://docs.info.apple.com/article.html?artnum=107369
http://docs.info.apple.com/article.html?artnum=106461
You will also find help at http://www.macwindows.com/

Similar Messages

I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Sharing Files between Mac and PC over a Network

Greetings,
I have recently made the switch to the Mac, and I have been so pleased with it ever since! I am getting married soon and my wife-to-be has a Windows XP desktop machine. I have been reading up on the different options on sharing files, and I want to ask if someone with experience can confirm what I think I have discovered.
1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
Thank you for any help that you might offer.

1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
You don't need Macdrive for sharing files over the network, macdrive is only needed for a PC to read a Mac formatted Hard drive that is directly connected to a PC i.e Firewire Drive.
2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
Yes you can write to a windows sharepoint on a mac this would be limited to their home folder unless you setup other permissions.
To setup windows sharepoints your best using a shareware utility called sharepoints
Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
It does not matter what format hte pc drives are if your sharing over a network you only need to know about formatted drives if they are directly connected to the computer i.e firewire, or usb drives.

WRT110 Can't connect MAC and PC to wireless network at the same time.

I installed a WRT110 router on my son-in-law's MAC sometime back and at the time configured it to have the MAC connected via Ethernet. My PC laptop worked fine with it in the wireless mode. Recently we changed the MAC to wireless newtworking and removed the Ehthernet connection. Now if the MAC connects to the wireless network first and then I attempt to connect with my PC laptop the PC cannot find the network and the MAC loses connection. If I shut my PC down the MAC will not find the network until it is put to sleep and reawakened. If the MAC is put to sleep my PC wil immediately find the network. If I first connect my PC and then awaken the MAC both work fine. I've checked all of the router's setup settings and they seem to be OK. I am not MAC savvy and my son-in-law is a neophyte at computers so we are really helpless when something doesn't work. Help will be appreciated.

I tried this setup change after reading another similar post. It didn't help. One thing I had wrong in the first post is that neither computer will connect to the wireless net after we experience the wireless failures until both are turned off, at least that is what happened after making the suggested changes. Is this a WRT110 issue? Seems there are quite a few posts similar to mine.
Bo2

Mac and PC in bluetooth network

Hi
I'm trying to network my PC desktop with Windows XP with a MacBook with Leopard, OS X 10.5. My PC is able to find the Mac, but the Mac is not able to find the PC. Both machines connect to my Sony Ericsson cell phone. The PC is discoverable it claims. How come the Mac doesn't find it?
Is it possible to set up a shared internet connection between the two machines by using bluetooth? If possible, is there a step by step guide available online somewhere?

I really need a router, don't I?

Sharing Linksys Wireless Print Server with MAC and PC - How to do?

I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
http://www.macosxhints.com/article.php?story=20050406151311940
Even though this was for a different type of Print Server, this worked for me.
When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
http://www.macosxhints.com/article.php?story=20060404021600193
I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
"the process "picwpstops" stopped unexpectedly with status 1"
and
"the process "rastertoprinter" stopped unexpectedly with status 1"
The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
Thank you

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

HT4796 Migration assistant is telling me that it has lost connection with my Mac and to ensure they are on the same network. They are, and an ethernet cable is plugged into them. What do i do?

Migration Assistant has been running since yesterday evening. My Dell is now telling me that its trying to reconnect to my Mac and to ensure they are both using the same network. I have an Ethernet cable plugged in them and they are both on the same WiFi. What can I do?

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

How do i create a little network with my i-mac and macbook

how do i create a little network with my i-mac and macbook

Hello:
To give a sensible answer, a little more information is needed.
I am guessing that you want to set up a wireless network as you have both a desktop and laptop.
There are some pretty good tutorials/articles in the knowledge base articles.
Barry

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password

A new iPad and new Express, but no Mac - can't set up network!

Here's a puzzler (for me at least) --
Mom bought a new iPad and new Airport Express. She has no Mac, so no iTunes and no syncing. Her iPad does NOT have Airport Utility. She's starting from scratch.
Her Express is connected to her Cox Cable Cisco modem, shich shows steady green for good internet connection. The express flashes amber, I assume becuase there's no network set up.
Her iPad sees the Express -- Wi-Fi in the Settings menu has "Apple ..." where the network name appears -- and the wireless signal 'fan' shows strong in the top bar.
In iPad > Settings > Wi-Fi, Wi-Fi shows 'on', no editable network shows, and no "create network" option shows.
She can't get Airport Utility without internet or syncing to a Mac, and she can't see any way to create a network, or see any existing network that she can forget or manage.
Is this simple Cox Cable > Cisco modem > Express wireless > iPad a workable setup?
Is there any way to create the wireless network without Airport Utility?
Thanks!
Otto
P.S. The iPad isn't pristine connection-wise. It was temporarily connected to a public Wi-Fi to complete setting up an iCloud account, and so get to the home screen for the first time. BUT, my mom is ancient and fearful, and I don't want to send her out to find public Wi-Fi to set up a a credit card account so she can use the app store to get utility if I don't have to. Help.

Thanks CRMDVM -- ...which means, I think, that she will need to go out into the wide world to find public wireless. Makes me wish Airport Utility was one of the stock apps that came with the iPad.
Any other ideas? Any way to manually configure on an iPad? Anything? Thanks.
Otto

HT4796 Are there other things that need to be done for the Mac and the PC to link up. Mine are on the same network. I have enabled sharing. The PC does see the Mac in its network but they just won't link up.

I am trying to migrate my iTunes information from my PC to my Mac. I have installed the migration software required on the PC. The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

I am trying to migrate my iTunes information from my PC to my Mac. I have installed the migration software required on the PC. The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

I have 2 macs and 2 PC laptops in my home wireless network. Can I use the Airport/Time Capsule hard drive to back up all 4 machines? I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help

It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

I got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

Under Network Preferences, select the WiFi
click on "Advanced..." button
Select the network you want to delete from the list and click on "-"
Click "Ok"
Click "Apply"
Well done ;-)
You may also want to delete the wireless key from Keychain.
Open Keychain, seach for the old wifi network name, slect it and click delete

How do I create a shared network drive between a remote Mac and a remote PC?

I have read blog after blog to try to find a simple solution to my problem, with no luck.
I have two computers. 1 is a Macbook Pro Retina with paralelled-Window 7 access. The other is a Windows 7 PC. The two computers are remote. ie one is on a home network in 1 state, the other is on a home network in another state.
The PC is running a software program that has a large data file with sensitive material. I want my Mac to be able to share this data file. I am told I need to set up a network connection between the two. I have tried doing a Microsoft VPN connection through the paralleled-Windows 7 mac and the Windows 7 PC. I am setting up the network to have the PC act as the server, thereby creating a network connection directly to the PC's IP address. I receive several different errors for the network tunneling when trying to connect. I believe this is because both computers are running on home networks, rather than one running on a secured work network. I read every blog out there about resolving these error messages I get, but again no luck.
Is there an easier way to resolve my problem? Can the data file be stored on some sort of cloud server that would allow constant updating. For instance, we may both be in the software at the exact same time on our remote computers, but we need whatever I save on my mac to be accessible immediately to the PC.
If anyone has any VPN software suggestions, cloud storage suggestions, or input on the method I have already tried, please help!
Thank you!

I don't know if this will work for you or not but you might want to consider something like TeamViewer. Its a great program that can not only be used to remote control any pc or mac but you can also transfer files as well. Here is the link for more information.
http://www.teamviewer.com/en/index.aspx
Of course someone will have to be at the site to install it the first time and then it can be used remotely.

Setting up a small business network using mac and windows pcs

Setting up a small business network using mac and windows??

Ok that sounds great. What is your actual question as it relates to AirPort networking? Is it: Can I set up a wired/wireless network with an AirPort base station that support multiple Mac & PC clients? If so the answer is yes.
If, instead, it is how to I configure an AirPort network to support a small business you will have to provide more details on both your networking & computing equipment in order for any of us to help you.

Mac and PC in a network

Similar Messages

Maybe you are looking for