Mac and PC to AirPort Extreme

I'm hoping you can help me out and explain to me what the heck i'm trying to do.
what i have
- desk top PC
- MacBook Pro lap top
- airport extreme
- external hard drive
- airport express
what i'd like to do is hardwire my desk top PC to the airport extreme and also have an external hard drive hooked up to the airport extreme
I'm hoping to do a few different things on the hard drive, first store all my photos and music on it and second use it to back up both the PC and the mac. WILL THIS WORK?
The other question I have is, how do you have one library of music (ie the hard drive) and have multiple computers run itunes from it?
if I do store all my music on the hard drive how does each computer run itunes from that one central spot ??? what about adding songs, or updates or syncing my ipod, does it need to be via one computer only or can i do it via both computers?
thanks for your help

I'm hoping to do a few different things on the hard drive, first store all my photos and music on it and second use it to back up both the PC and the mac. WILL THIS WORK?
Yes. If you're using backup software, that software needs to be capable of backing up to a network drive.
how do you have one library of music (ie the hard drive) and have multiple computers run itunes from it?
Launch iTunes with the Option(Mac) or Shift(Win) key held down and point it there.
(55774)

Similar Messages

Connecting Mac and PC to Airport Extreme

Trying to migrate some files from a PC to a Macbook and am having trouble. After many failed attempts, it seems to me the best way is to connect both the PC and the Mac directly to the Airport Extreme. I am asking if this is possible, will it work to move the files from the PC to the Mac and how to set it up correctly? Below are details on setup now, problems and various solutions, although just showing me how to attach both a PC and a Macbook to the Airport Extreme, is my primary need now.
NOW - The PC connects directly with Ethernet Cable to Airport Extreme. Airport Extreme connects directly to the ISP provided Cable Modem. The PC also connects directly to a Printer with a printer cable.
The Mac connects by Wireless to Airport Extreme (and Internet) and to to the Printer.
This arrangement is a result of the PC, more or less, falling apart. The PC wireless connection usually will not connect or fails, therefore I opted to use the Ethernet connection. By necessity, a D-Link is used in place of the two broken USB connections on the PC. Due to condition of PC, I prefer to leave everything as it is since it's working so far.
POSSIBLE OPTIONS - When I looked at various ways to move the files from PC to Mac, it seemed best to use an external hard drive, but I've not tried that yet since I am not sure how to change the drive's PC format to the Mac format without losing, in the process, all the files copied from the PC. I bought a new external drive that is supposed to work on a PC or a Mac, except that, with this PC,there is no assurance the drive will work. Two others I used as backup drives no longer can be found by the PC.
I tried to set up a network with the PC and Mac, but never succeeded.
Also, tried the file sharing instructions and never succeeded in that. In both cases the Mac just did not show up on the PC network places, nor does the PC show up on the Mac, despite my following instructions as well as I could.
That is why I would like to take what seems to use a more direct route to get the files I want from the PC to the Macbook.
Thanks in advance for any help you can provide.
Don

Please check out this excellent article by iFelix on sharing files between PCs & Macs: Sharing files between a Windows XP PC and a Mac running OS 10.4.x

Connected Mac and PC to Airport Extreme

I have an Airport Extreme and a cable modem/internet connection. I have the Airport set up via Ethernet to the cable modem and my iMac(my Mac is old and does not have an airport or wireless card), but the PC will not connect or get an IP address from the Extreme if I put security on the wireless network. I have found guides that tell you you need to get the full hexadecimal key to enter into the PC as the password but am unable to find it on my Mac.
Please help.

2- I tried just connecting an ethernet cable directly between my Mac and PC and set up static IP on both but for some reason it does not work, but it works fine via the router, could this be because direct connection requires a crossover ethernet cable ?
How old is the PC and does it use gigabit.. with gigabit you do not need crossover cables.
However the two computers can get confused about negotiated speeds.. so set exact speed on each computer.
Set both to gigabit. Full duplex and see how that goes.. assuming a good quality it cable it should work.
If the max speed of the PC is 100mbit then reduce the speed in the Mac to the same.
If you do this kind of setup you also need to set static IP in the correct range .. but you need to NOT set gateway and DNS in the PC.. in the Mac on the other hand I have found they tend to like the gateway and DNS set.. but you use the same one as the airport extreme uses.
1- Is there any latency added when computers are communicating to each other, in my case a Mac and PC, via the airport extreme ?
No, the latency on ethernet networks is tiny.. and transfer speeds on gigabit are identical .. using the router is much easier than messing about with direct cable connections.

Annoying!: Sharing an external HDD to a Mac and PC via Airport Extreme

I use an Airport Extreme to connect wirelessly to the Internet. I have no problem accessing the Internet with either the house's Mac or PC.
I have an external HDD connected to the AE via USB and can access that via the Mac only.
I wish to be able to access the external HDD wirelessly via the PC. The external HDD has 2 partitions, FAT32 and NTFS.
Via Airport Utility I have found my way to File Sharing under the menu, Disks. I have just selected "Share disks over WAN".
Do I need to configure the Windows File Sharing also?
This problem has bothered for me some time and I have been unable to find anything on the Internet.

I wish to be able to access the external HDD wirelessly via the PC.
Please review the following Apple Support article: AirPort: How to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows
The external HDD has 2 partitions, FAT32 and NTFS.
The AirPort Extreme Base Station (AEBSn) will only "see" the FAT32 partition as it will not recognize partitions formatted for NTFS.

How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

Maybe you are looking to re-purpose this equipment versus getting rid of it if so, the best thing to do is search the internet for tutorials. And I say this because it's what I would do, there are a lot of tutorials online. Hope you can find good use for them. Worse case scenario if you can't find something right now, package them very nicely and when you come across something unbox and enjoy. I've re-purposed a mac color classic and LOVE IT!!

Where do i find the MAC address on my Airport Extreme?

Where do i find the MAC address on my Airport Extreme?

Your AirPort Extreme has two MAC addresses, one for Wi-Fi, which is called the AirPort ID and another for the wired connection, called the Ethernet ID
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
(Here, I am assuming that you are using AirPort Utility 5.6 for Mac OS X Lion )
The AirPort and Ethernet IDs are on the summary page

Where can I find the MAC Address of a Airport Extreme ?

Where can I find the MAC Address of a Airport Extreme ?
I need this to extend the wi fi range in my home. I'm using a Motorola Cable modem and to extend with Airport Extreme, I need to set up inside Motorola the MAC Address of the Airport Extreme.
Message was edited by: JPA3003

There are actually 3 MAC Addresses on an AirPort Extreme......1 for Ethernet, 1 for 2.4 GHz wireless and 1 for 5 GHz wireless.
You can normally see them by using AirPort Utility. The rub here is that the AirPort needs to be setup and working to be accessed by AirPort Utility.
The other approach is to look on the bottom of the AirPort. The newer AirPorts usually have this information in very small print, so a magnifying glass will probably be required. Other versions embed the numbers in the foam mat.
Note.....Apple uses proprietary settings for the their wireless "extend" feature.....designed to only allow other Apple devices to connect. So, it is extremely unlikely that the AirPort would be compatible with a 3rd party router if you are trying to use the AirPort to wirelessly extend the network.
Let us know if you are able to do this.

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

I changed my internet box and now my airport extreme light flashes amber what I need to do to get the green light back

I changed my internet box and now my airport extreme light is flashing amber but I have internet connection, how can I get the green light back

When you change modem (the internet box I presume) you should reset the AE to factory and redo the setup completely.
However if you merely want to stop the amber flashing.. find the cause.
Open the airport utility and click on the AE..
It will give you a list of faults or problems... fix each one and the light will turn green.
The most likely fault is double NAT.
That means the AE should be in bridge mode.. but if you list the fault we can give you further help with what to do to fix it if you cannot understand the instructions.
Apple does give a procedure to remove the problem although it may not always be the best solution.
eg Ignore.. the light will turn green.
Lately Apple is saying to use double NAT and ignore the problem.. I do not thing that is a good idea at all.
To bridge however may be easier after a full factory reset than trying to do a change to the setup.
If you run Yosemite.. then I recommend the following.. please read AE for TC.. (Time Capsule is what I mainly use but the setup is identical).
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
In your case bridge is most likely required.. and it is up to you how you deal with this one.. for now see if it is stable.. if it gives you issues come back and fix it.
4. Set IPv6 to link-local only on the computer..
This is strange one in that apple should have fixed this up ages ago.. but we are finding the auto setting even on Yosemite is still giving the wrong setup.

Purchase and upgrade my Mac Mini G4 with Airport Extreme

Hello! Can anybody tell me the right part number of the Airport Extreme Card for my Mac Mini (original). And does anybody know any web site where I can purchase it? I already have the bluetooth device, i just need the wireless.
Thank you very much.

Welcome, it may have been an idea to start a new topic but since you haven't, I'll try to answer some of your questions.
I have a company issued Router (not wireless) would I have to replace this with the Extreme or simply plug into one of the ports on the Linksys?
Since the new AEBS has not been released yet I can't give you a 100% answer, but based on its predecessor then I would expect it to be possible to use the Linksys as the router and the AEBS as a wireless access point connected by ethernet cabling.
It also states that to set up you have to install some software?? This concerns me as our company does not allow us to install anything on this PC. Any thoughts...Not a problem with the Mac, but I want it to also work with my PC's...
It depends what features of the AEBS you wish to utilize. If you simply wish to configure the AEBS using the Mac and merely connect to the AEBS as a wireless client through XPs Network connect then I think thiswill be a viable option. However, that said, the best advice is to wait till release when you can evaluate the AEBS 1st hand and see if it meets your requirements or not.

Several PC and Mac connectivity issues with Airport Extreme Base Station

Hello,
This is not all necessarily airport base station related, but there is some crossover, so I'm posting all of these issues...
Here is the laundry list of things that I can't make work in a home network that contains a PC w/ XP Home, MacBook 1.83 w/ 10.4.7, and Airport Extreme Base Station w/ Modem.
1. Can't see the PC from the Mac.
a. "Connect to server -> Browse" does not find the PC
b. "ipconfig" on PC provides valid looking IP address
c. ping from mac to PC IP address times out
d. Firewall on XP is disabled via control panel
b. Windows file and printer sharing is enabled
2. Can't see mac from PC
a. Windows file sharing enabled on mac
b. Firewall on mac disabled
c. I used \\MacIPAddr\shortusername
d. ping times out
3. Using dial-up to access internet, how do i tell airport to dial using PC?
a. this feature is working fine from mac
b. If already connected (via instruction from mac), can surf the internet fine from PC
c. Is this even possible from the PC?
4. Can't see printer connected to base station from PC
a. See it fine from mac
b. How do i "find" the printer on the PC?
c. Is Bonjour required for this? (I don't have it on the PC yet)
5. Can't see a "shared" printer on the PC from the mac
a. printer is connected directly to PC
b. Mac's add printer wizardry looks like it may "see" the printer, but then it asks for username and password for PC. This is XP home, with no usernames or passwords. Single user. Nothing seems to work in the credentials pop-up dialog.
Any suggestions on any of these issues is very welcome.
Thanks

Is the PC running any kind of internet security or firewall software?
1. Can't see the PC from the Mac.
2. Can't see mac from PC
Sharing files between an XP PC and a Mac running OS 10.4.x
http://www.ifelix.co.uk/tech/3020.html
3. Using dial-up to access internet, how do i tell
airport to dial using PC?
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility
http://www.java.com
4 . Can't see printer connected to base station from
PC
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
5. Can't see a "shared" printer on the PC from the
mac
Printing to a printer on a XP PC from a Mac running 10.4.x
http://www.ifelix.co.uk/tech/3015.html
Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
http://www.ifelix.co.uk/tech/3014.html
iFelix

Sharing ONE iTunes Library on TWO Macs (Mac and MacBook) Using Airport Extr

I did put this thread in the Airport Extreme forum, but I have moved it here on advice.
I realise that this has probably been answered a million times on this forum, so I apologize in advance. I recently bought an Airport Extreme and connected to my wireless home network, my internet speeds have increased (don't ask me why because I don't know) and I am really happy with the results, I have just one issue which I am hoping to resolve.
I have a iMac in my study, and a MacBook which I use all around the house. I have an external hard drive connected to the AEBS which has all of my files on, including my iTunes music. The problem is, I download music on both computers, and if I download a track or a movie onto the itunes library of one, it doesn't appear on the other computer, even though both iTunes apps are pointing to the same folder on the external hard drive.
The question I have is, how do I make both itunes libraries share the same library, so if I add a song on my mac it will automatically appear on my macbook when i use it next.
Both macs are fully up to date, and running Leopard
Many Thanks
JC

This is really an iTunes question. How do you configure a remote library which updates properly for all clients?
I suggest that you ask in the iTunes discussion area.

Mac Mini/Lion Server/Airport Extreme Won't Sleep...?

I am at a loss with this one. I have a Mid-2011 Mac Mini running OS X 10.7.4 Server (11E53) connected via gigabit ethernet to an Airport Extreme. This computer will not sleep on its own using the system sleep timer.
If anyone has any ideas that may help, I'm all ears! The Mac Mini should sleep as intended and the Airport Extreme router should wake it if network resources are requested via a Magic Packet. This same Airport Extreme does wake the other computers on the network just fine when they are configured to Wake on Lan (womp 1 in the pmset -g output, below).
The server is configured to offer the following services: file sharing, Time Machine and screen sharing.
The power saver settings on the Mac Mini are configured to sleep in 45 minutes, turn the screen off in 1 minute and wake for network access is enabled. The output of pmset -g is below for reference:
Active Profiles:
AC Power                   -1*
Currently in use:
hibernatemode      0
disksleep          10
womp               1
networkoversleep   0
sleep              45
powerbutton        1
ttyskeepawake      1
hibernatefile      /var/vm/sleepimage
autorestart        1
panicrestart       15
displaysleep       1
If the Mac Mini is manually placed in sleep mode, via the Apple Menu or the button on the Login Screen for example, then it will sleep just fine. While the Mac Mini is sleeping, it will wake properly when the shared resources are accessed via another Mac on the network. For example, if the Macbook Pro tries to begin a Time Machine backup using the Time Machine Server on the Mac Mini, it will wake just fine and the backup will complete with no issues. The Mac Mini will not sleep again using the system sleep timer and must be manually put into sleep mode.
There is one printer (Canon MP560) installed on the Mac Mini, connected via USB, not shared on the network and no print jobs stuck in the print que.
I tried using the PleaseSleep software but that causes problems when the Mac Mini is used via Screen Sharing. When the Mac Mini is controlled remotely via Screen Sharing, PleaseSleep waits about a minute into the session and forces sleep mode, cutting the session short prematurely. This is unacceptable.
Also, there are no assertions that would prevent system idle sleep using the system sleep timer, as seen in the pmset -g assertions output below:
6/20/12 4:51:02 PM EDT
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      0
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
Kernel Assertions: 0x0012
* Kernel Assertion ID = 500
   Created At = 12/31/69 7:02:29 PM EST
   Modified At = 12/31/69 7:00:00 PM EST
   Owner ID = 0xffffff80122f0000
   Level = 0
   Assertions Set = None (4)
* Kernel Assertion ID = 501
   Created At = 12/31/69 7:02:33 PM EST
   Modified At = 6/18/12 10:34:22 PM EDT
   Owner ID = 0xffffff8012302000
   Level = 255
   Assertions Set = None (4)
* Kernel Assertion ID = 502
   Created At = 12/31/69 7:02:57 PM EST
   Modified At = 6/20/12 4:05:41 PM EDT
   Owner ID = 0xffffff801238ee00
   Level = 0
   Assertions Set = None (32)
* Kernel Assertion ID = 503
   Created At = 6/18/12 10:32:27 PM EDT
   Modified At = 12/31/69 7:00:00 PM EST
   Owner ID = 0xffffff8011f22c00
   Level = 255
   Assertions Set = None (8)
* Kernel Assertion ID = 507
   Created At = 6/19/12 10:56:46 PM EDT
   Modified At = 12/31/69 7:00:00 PM EST
   Owner ID = 0xffffff8018b1c400
   Level = 255
   Assertions Set = None (8)

I Have the same issue with pleasesleep.
No ARD Session without sleep ;-)
My stup is a little bit different to yours.
My MacMini act as an HTPC for Plex and it dosent sleep as well.
I guess it has something to to with External USB HDDs or in your case printers or USB Hubs or etc. etc.
I found a AppleScript called Nacrolepsy 2.0
It dosent work probebly right now but I hope It could be a solution in the near future.
Take a look at
http://blog.schreiter.info/narcolepsy-2-0-for-mac-os-x/

Found a fix for printing from Mac and PC using Airport Express!

I hope this helps somebody else because it's taken me hours and hours of frustration to trip over this solution. I have a MacBook, Airport Express and a Windows XP PC. Internet worked fine but I could not print form the PC via airport. I tied all the various links from iFelix (thanks to him for what sure seems like a lot of work to help others) but they didn't work. Here's what did...
To setup a printer using the Bonjour Printer Wizard:
1. Download the Bonjour for Windows installation package from the
Apple site http://www.apple.com/macosx/features/bonjour/.
2. Install Bonjour for Windows by launching the BonjourSetup.exe file from the folder where place it was downloaded.
3. Start the Bonjour Printer Wizard either by clicking its icon on the desktop or by selecting Start -> Programs -> Bonjour -> Bonjour Printer Wizard.
4. Follow the installation steps until the Install Bonjour Printer screen appears.
5. In the Install Bonjour Printer screen, select Generic in the Manufacturer list and then Generic / Postscript in the Model list. This step is the same for any printer model you have.
6. Follow the rest of installation steps.
The key is the Generic and Generic/Postscript settings. I also set up the Parallels program on my Mac. These instructions come from their documentation. It's the only thing I've found that works. Hope it helps some of you!

Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://tech.ifelix.net/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://tech.ifelix.net/1012.html

MacBook and iMac via AirPort Extreme?

Hello.
If I get a new MacBook, can I connect directly with my APE-ed iMac and a USB hard drive ected to it? Or do I need to go via an AirPort Extreme Base Station?
Would an AirPort Express work as the base station?
Thanks.

Yes you can share a drive across a network if the drive is connected via USB to a Mac. This works in Ethernet or any other networking connection.
...since apparently an HD can't work with the AirPort Express (the iTunes one)). (I wish they'd called them completely different things.)
They are called different things. The AX support music streaming. The AirPort Extreme base station (AEBS) does not.
I meant, an AirPort Extreme Base Station. The one coming out today.
It came out earlier this month, but the same is true. The AEBS IS a base station.

Mac and PC to AirPort Extreme

Similar Messages

Maybe you are looking for