Mac and Windows internet access

Hi
I've got my MacBook configured to startup in Windows XP or Mac OS X. Mostly I use Mac (of course) which is where I access the internet. But I have a need to access the internet via the Windows side and it won't. I have tried the Wizard but to no avail. Has anybody any suggestions of what I need to do.
Wendy

Apple Setup.exe
XP is bad on security so it may try to run automatically.
HOW TO and more is in the Boot Camp FAQ and PDF guide (access from Boot Camp Assistant as well)
http://www.apple.com/support/bootcamp/
Your Mac OS X DVD has a Windows /BootCamp volume that only shows up when in Windows. You can copy that to your XP system as well and run from there.

Similar Messages

HT3728 No status light at all on Airport/Time capsule. I can plug internet cable directly into bac of my MAC and have internet access no problem. Is my Airport dead and need to be replaced??

I have NO status light on my Airport/Time Machine, I unplugged the internet connection from back of Airport and plugged directly into my MAC and am able to get to the internet just fine.
The Airport is almost 6 years old
Is my Airport dead and just need to get a new one??

Is my Airport dead and just need to get a new one??
Unfortunately, yes. On the upside, your Time Capsule lasted about twice as long as normal.

MAC and Windows Internet Explorer

Is there a way to run internet explorer on a Mac?

capturedbyellen –
First welcome to the Apple Forms.
The short answer is yes – there are basically two methods that you could use:
Option 1: Run Parallels/Bootcamp and install Windows XP on your Mac. Though this will give you the greatest flexibility in running Windows apps, it also generates the most headaches – just look at the number of post concerning this option. Also this has the greatest cost $79 for Parallels (Bootcamp is free from Apple) plus the cost of Windows.
Option 2: Install Crossover from Codeweavers (www.codeweavers.com) this product is based on the WINE project and basically installs a 'Run Time' version of Windows XP. I am currently running IE6 in a ‘bottle’ with no problems as I need to access Outlook Web Access. This solution is also the cheapest ($39 for standard - $69 for Pro).
Either of the solutions should work though my preference is Crossover.
Best of Luck –
BH

Mac and Windows on same iTunes Library? NAS?

I moved my mac iTunes library to a NAS, hoping that all machines in the house (Mac and Windows) could access and update the library (but not at the same time because of file locking). So I moved the .itl and .xml files over to the NAS as well but some machines can only see parts of the library.
Is this not a supported configuration? How could I set up such a sharing library with update capability? Thanks in advance.

You don't need any software installed on the windows PC. Just plug it into the Ethernet port on the router to the Ethernet port on the NIC card. If you want the Fios software installed go to activatemyfios.verizon.net and click configure another computer and enter your fios user name and password. If you are having connection problems go to verizon.com/connectionwizard and install that software.

Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox

Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox can't even connect to Mozilla for updates. Firefox just sits on the default search page and attempts to connect to websites by typing URLs, or by clicking on the links on the default search page don't work.

You could try the following:
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.
Let us know if this fixed your problem!

Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

If you want a cross-platform solution that doesn't require the use of third-party software, use an external drive with hardware encryption. The device will have either a physical key or a numeric keypad. I don't have a specific recommendation.

My mac book air connects to my network and gets internet access but time machine cannot find my airport base station to set up time machine

My mac book air connects to my network and gets internet access but airport utility cannot find my airport base station to set up time machine

airport utility cannot find my airport base station to set up time machine
Normally, AirPort Utility is not used or needed to set up Time Machine backups......unless a default setting on the Time Capsule to Enable File Sharing has been changed.
On the other hand, if you open AirPort Utility, a picture of the Time Capsule should be displayed. Are you saying here that the Time Capsule does not appear when you open AirPort Utility?

VPN -- different behavior between Mac and Windows XP clients.

Hi,
Background:
I have a Mini server serving L2TP IPSEC vpn with both Mac and Windows (all XP, so far) clients.
The mini sits behind a Netopia router/firewall/NAT box that port forwards L2TP traffic to the mini.
The mini has a public but unrouted address (unrouted in the public Internet, that is.) The same Netopia serves as the router for outgoing public connections. DNS is served by other servers.
The VPN clients are distributed addresses from the unrouted public address space.
Client <-> NAT <-> Public Cloud <-> NAT <-> Private (with public addresses) <-> Mini (VPN)
Mac clients work happily, accessing internal and external hosts.
The XP clients have a registry value set to allow NAT traversal:
under HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\IPSec, AssumeUDPEncapsulationContextOnSendRule is set to 2 to allow dual Nat traversal.
The XP clients happily access internal hosts, but hang accessing some, but not all external hosts.
For example, most Google services are quickly displayed, whereas www.comcast.net or www.llbean.net hang. It appears to be more frequent accessing third-party hosts while processing the initial page. Some Google web services, e.g. some Google Map plugins do eventually hang.
An XP host internal to the network configured with the above registry key set to 0 (No NAT traversal)
exhibits the same behavior when using a VPN connection
Public Cloud <-> NAT <-> Private (with public addresses) <-> Mini (VPN) <-> Pvt. <-> Client
Same host without VPN works fine.
Clearing the XP checkbox that routes all traffic to the remote (VPN) router makes external hosts work
as you would expect.
So my questions are:
a) What's XP doing?
b) Can it be fixed? (besides routing public traffic away from the VPN.)
Thanks Jonathan
p.s. MrHoffman, I almost asked this in the HP Forum as well, till I noticed you were here. (Assuming you are Hoff.)

Hi soccerdude21490-
+Is this possible?+
Theoretically yes. However, it would be up to the school to allow you access through their network.
The first step would be to contact the school's IT department and ask them if they will allow such a connection, and if so, could they please provide you with the settings (ip address etc.).
Luck-
-DP

External hard drive use with both Mac and Windows

I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844)

1 hd with 2 file formats for use between mac and windows?

Think this is the right forum...
I want to instal a program onto an external hard drive for use on both mac and windows. The program supports both mac and windows.
My plan is to get an external hd and partition it in half. One half i will format mac os extended and the other i will format ntfs. I'll instal the mac version on the mac partition and the windows version on the ntfs partition.
This should work i'm thinking, yes? I.e. when i plug it into windows it'll run the windows installation no problem and when i plug it into the mac it'll run the mac installation no problem?
Thanks.

An easier solution might be to just connect the drive to a Windows PC and format it as FAT32. Both Windows (98 and higher) as well as Mac allow full read/write access to FAT32 formatted drives. No need to download any drivers, etc. It just works.
Yes, this solution is not perfect, but none are. The free NTFS drivers for Mac are not most efficient drivers for speed/performance, the HFS+ drivers for Windows are not cheap, and have their own performance issues, and FAT32 has the limit of file sizes over 2GB (or is it 4GB now?) not supported. No one solution is perfect, but for the many one is better than the others, but it all depends upon their circumstances which is "better".

External hard drive for Mac and Windows?

Hey all,
Is it possible to set up an external hard drive with a partition that has one side compatible with Mac and the other with Windows, similar to a Boot Camp setup on an internal drive? If so, how do I do that? Thanks for any advice you can give.

Rekishika:
Yes it is possible. Use Disk Utility from Leopard and partition the external drive to the desired space for each. Format one side with Mac HFS+ Journaled and the other with FAT32 (You can reformat the FAT32). You can also format both external partitions to FAT32 if you want Leopard and Windows to access (read and write)either one of them.
Axel F.

On Firefox 3.6.x on Mac and Windows, Google Analytics tracking code leads to an Error 400 page

Our business sent out an email campaign that has several links containing Google Analytics tracking code in the URL.
In the tracking code, which is automatically generated via the email campaign software, is an em-dash. The URLs works in every browser (Google Chrome, Safari, Windows) and in older versions of FireFox. They do not work in 3.6.x versions of FireFox in both Mac and Windows.
As a result, when customers click on a link in the email, they get a page that says "HTTP Error 400 - request is badly formed" because FireFox interprets the em-dash as garbage.
Once this error occurs none of the pages in the site can be accessed unless a specific cookie is removed.
Seeing how many people do not know how to clear cookies - it is especially cryptic in the Windows version of FF 3.6.10 - what are the chances that there will be a release of Firefox to remedy this problem? And is there anything else that could be done?

Weird. We are having this same problem as well. Ours happens in Chrome as well. What I have figured out is -at least for us - is its somethign to do with the Google Analytics tracking cookie on our site. If I go to cookies and then delete the _umtz cookie, the site will load fine. In the time being I have set "pageTracker._setCampaignTrack(false); " in our tracking code to keep the script from dropping the cookie in users browsers.

Using on Mac and Windows

I want to purchase CS6 design standard and before I do I wanted to know:
Can I use the products on Mac and windows (at the same time and one at a time) or do I have to purchase for each platform separately?
How many systems can I install and use on simultaneously?

So even for volume license the splitting of the suite to install its components on different machines is not allowed?
I know thats what is clearly stated in the EULA FAQ link you provided but it does not mention volume licensing
See http://www.adobe.com/volume-licensing/policies.html
CLP and EA Policies > EULAs
All use of a product is governed by the EULA for the product, which usually must be accepted by electronic click-through. EULAs are posted on the Adobe product license agreements page. Where the CLP 5 and EA terms and conditions conflict with a EULA, the CLP 5 and EA terms and conditions supersede.
one of my local resellers said I could slice it. Thats why I want to confirm.
What you're calling "slicing" is what Adobe's EULA terms "unbundling".
4.5 No Unbundling. The Software may include various applications and components, may allow access
to different Adobe Online Services, may support multiple platforms and languages, and may be
provided to Customer on multiple media or in multiple copies. Nonetheless, the Software is designed
and provided to Customer as a single product to be used as a single product on Computers as permitted
herein. Unless otherwise permitted in the Documentation, Customer is not required to install all
component parts of the Software, but Customer may not unbundle the component parts of the Software
for use on different Computers.

Screen Share Mac and Windows

Hi,
Sometimes I'm asked to help friends and family with stuff on their computers. It would be handy if I could help them remotely but I've yet to find a way to screen share between a mac and windows machine over the internet.
Is it possible?

HI,
A Leopard 10.5 tutorial here might help...
http://reviews.cnet.com/8301-13727_7-10329122-263.html
http://www.macosxhints.com/article.php?story=20071023174751182
Sharing your screen with other computer users
You can set up your computer to allow others to view your screen and control your computer. While your screen is shared with another computer, a user of the other computer sees what’s on your screen and can open, move, and close files and windows, open applications, and even restart the computer.
To set up screen sharing:
Choose Apple menu > System Preferences and click Sharing.
Select the Screen Sharing checkbox.
To specify who can share your screen, select one of the following:
All users: Select this if you want to allow any user with a user account on your computer to share your screen.
Only these users: Select this if you want to restrict screen sharing to specific users.
Click Add + at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Accounts preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list and click Select.
Click Computer Settings and set the following options:
Anyone may request permission to control screen: Select this to allow anyone on your network to request to share your screen.
VNC viewers may control screen with password: Select this and enter a password that VNC viewer applications can enter in order to control your screen.
It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.
For more information go to your Finder and click Help from the Menu Bar. Type in Screen Sharing in the search field.
I use the same instructions for screen sharing betweeen a Mac running 10.6 to a Mac running 10.5 and a Mac running 10.4, so hopefully the above instructions and links will help.
Carolyn

File transfer between Mac and Windows

I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
http://macntfs-3g.blogspot.com/
scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
i hope that helps.
p.s. the efi boot manager download is NOT required.

Mac and Windows internet access

Similar Messages

Maybe you are looking for