Mac Appstore connection failed?

Hello. I have had a problem with my mac app store since I got OSX mavericks. After I got OSX mavericks I am not able to download anything from app store unless it is a software update. When I type in my username and password it says "Connection failed". Is there anyway I can fix this without reseting my laptop? Now I am trying to update to Yosemite but it still says Connection failed. Can someone please help me? Thank you

You may want to get in touch with the Mac App Store support folks -> http://www.apple.com/support/mac/app-store/. If anyone should be able to help, they're the folks to ask.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Similar Messages

  • IPhoto 8 & iMovie 8 give my mac a 'Connection Failed Error' then AFP error?

    After installing iLife 08, both iPhoto & iMovie cause my mac to try to connect to an unconnected server/network/drive.
    I get a Connection Failed The Server May not exist ... error, which eventually becomes an AFP error. Can I stop this? They both seem to be trying to connect/mount to a drive (that no files related to them are or have ever been stored on relating to previous iPhoto libraries.. any ideas)
    Not impressed with this new set really... iWeb crashes instantly. Nice.

    I'm getting this too but only with iPhoto.
    Before installing iLife '08 I moved my three iPhoto 6 libraries from my iMac G4 to my MacBook (via AirPort) as per the instructions in 'How to move the iPhoto Library folder to a new location'. I disconnected from my iMac and then launched iPhoto 6 on my MacBook to make sure each library was intact.
    I installed iLife and successfully upgraded each library but now each time I launch iPhoto 7 my MacBook tries to connect to the original location of the libraries and, if the iMac is asleep, gives the AFP error Tim mentioned above. If I then quit and re-launch iPhoto I get "Caution: the iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it".
    I can solve all this by making sure that my iMac is awake when I launch iPhoto but this is pointless if I'm out of AirPort range.
    Grr.
    Message was edited by: Timmargh to add clarity

  • Mac-Windows-Connection failes after Snow Leopard Installation

    I am dealing with 4 PCs at home – an IMac, a MacBookPro, a Dell Dimension and a Dell Precision Workstation. Before I installed Snow Leopard I could connect easily from my Macs to my PC via “Connect with Server” and the “sudo pico /etc/hosts” hint to rename my Windows-PC to real names (e.g. Dimension and Precision). After the installation I am prompted in OS X to give my account name and password again! And, of course, I don’t work anymore (wrong user name or password error). Because I put those information in long ago, I am not quite sure if I am putting the wrong Name/Password info in or if something happened during the Snow Leopard installation. I was never quite sure if “Name” meant the name of my Windows account I want to log into, or my Mac user name or a combination of both or the Server /Name thing, e.g. Dimension\Name. Just for info: My Windows-PCs can still connect without a problem to both Macs.
    Any help is appreciated what information exactly to put in that **** Name/Password box that appears if I want to connect to a Windows-PC from my Mac. Or what else could have happened during the Snow Leopard installation that cut of the former available ability to connect to my Windows-PC from OS X.

    I was able to see the other Windows XP computer and begin to connect. I was then presented with a login screen. I tried using the usual user name and password - no luck. I then formatted the user name as as follows:
    user name: computer name\user name
    password: as normal
    And it worked. Specifically in my case:
    user: cwy-pln2152\administrator
    password: planning
    This is what worked for me your mileage may vary.

  • Mac App Store Connection Failed After Mavericks Update

    Hi y'all,
    immediately after I updated my Lion to Mavericks (10.9.1), I could not access no more Mac App Store: as I enter my (valid and active) Apple ID credentials, I receive a "Connection Failed" message (in red, in the same login dialog, under the user id field).
    So I've tried to set to "Always Trust" all of my Class 3 Certificates in my Keychain, I removed all of the Mac Appstore plist files (appstore and storeagent), I've also tried to remove the network preferences plist file to reset my network interfaces preferences, I've also deleted the ocsp and crls cache files, and I've setup the ocsp and crls certificates preferences in my Keychain Access to off.
    I obviously checked out my App Store account and it's correct and active - I'm also currently using it on my iPhone, iPad and iPod with no problem at all!
    Anyway I wanted to try creating a new App Store account from the Mac AppStore itself: after I validated it, I tried to login into Mac AppStore... with no success!
    So, NONE of the above mentioned attempts solved the problem, and I'm WORRIED and astonished wondering HOW APPLE COULD RELEASE A MAJOR O.S. UPDATE THAT SMASHES THE MAC APP STORE, WHICH IS ONE OF THE CORE APPS OF THIS O.S.!!! I use Mac OSes since many years and I never had O.S. problems (only some minor issue with third party applications out of Apple's scope and solved with some simple workaround).
    CAN ANYBODY PLEASE HELP ME? :-)
    THX IN ADVANCE,
    DANI

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • "Slideshow HD failed to download" but Mac AppStore already charge the payment to my creditCard

    I just buy a full version of HDslideshow maker from Mac Appstore but when I fill in all the detail including payment credit card detail is done sucessfully. But when i download the App they come out the message "Slideshow HD failed to download"

    You will need to do a network recovery:
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • "Connection Failed" when trying to connect to another Mac on my wireless network.

    Hi,
    I am having an intermittent problem with the connectivity between my iMac and Mac Pro - the latter is the media server for our house. Occasionally my Apple TV's seem to lose connectivity to the Mac Pro too which is a real pain. Both Macs are running Mavericks and the Apple TVs are running the latest software too.
    If I try to connect to the Mac Pro in Finder on my iMac, the Mac Pro is there but when I click on it I get "Connection Failed". Rebooting both computers seems to fix the problem but is far from ideal when mid way through a film!
    The messages in console on my iMac when I try to connect to the Mac Pro in Finder is:
    14/03/2014 10:20:33.542 sharingd[253]: SDSharePointBrowser::handleOpenCallBack returned -5999
    14/03/2014 10:23:34.180 locationd[82]: could not open write stream for /var/db/locationd/clients.plist
    I'm not sure if this provides a clue?
    Thanks in anticipation,
    Rob

    I've managed to connect OK using Connect as. So at least that part is solved. I will see if I can get any diagnostics as to why the Apple TV drops out.

  • [HELP!!!]iCloud, Mac appstore not connecting, ever since I  move to china bot in ipad and macbook pro

    since I move to china a week ago i realize base on my personal experience that the country is definitely no mac friendly, which is unfortunate for me since i own a macbook pro, iphone and ipad, and i tell you why. ever since i move to china it seems that most of internet related services that apple offer in the mountain lion seemed to be useless, firstly, I can't connect to the mac app store, secondly, i can't connect to the iCloud to do backups for my ipad and iphone and sync notes, and lastly, although not a big lost for me but still noticable is that the help center no longer able to find help if needed from the internet. oh yeah and the safari seems to work slower. I tried to search for any person that are in similar situation like me but no ane seems to be in one therefore I started this discussion. please help me out...
    to give you guys a heads up, looking at all the problems the patterns seems to relate with the apple connections only, I use a mid 2009 macbookpro from Australia, and I bought the mountaion lion from an indonesian appstore, currently my feelings leads to the fact that my mountain lions that are not bought from chinese mac appstore is the reasons, since i read from some articles that the mountain lions that were released in china are different witht he rest of the world.
    any help or solution in order to make my mac working normal again is very much welcome, cheers guys

    What does Wireless Diagnostics show?
    Wireless Diagnostics
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Also try turning off Bluetooth.

  • Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

    My office is setting up a new gateway server.  I can connect to the old one just fine, but the new one is not allowing me to connect.  I can connect from my Windows VM, but not my Mac Client.  
    This is the log:
    2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
    screen mode id:i:0
    use multimon:i:0
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
    [2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
        User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
    Found
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
    And here's a log for server that I can connect to:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
    [2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
    [2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
    [2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
    [2014-Nov-26 15:52:29] RDP (0): Server hides cursor
    [2014-Nov-26 15:52:31] RDP (0): Server shows cursor
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
    Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated. 

    Hi Jeremy,
    Thank you for posting in Windows Server Forum.
    From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    Configuration used and full address name both appears different so please verify configuration accordingly.
    Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
    You can follow below guide to configure RD Gateway and after that verify the result.
    1. Deploying Remote Desktop Gateway RDS 2012
    2. How To Work with RD Gateway in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Mac App Store log in error message 'connection failed'

    Hi all,
    I access the internet via a local network and proxy server at my workplace who also use the websense firewall software. We've managed to sort it finally that we can log into iTunes, but still cannot log into Mac App Store using the same AppleID and password. Whenever I try I keep getting the 'connection failed' error message.
    Any ideas anyone???...
    Stuart.

    Hi all,
    I access the internet via a local network and proxy server at my workplace who also use the websense firewall software. We've managed to sort it finally that we can log into iTunes, but still cannot log into Mac App Store using the same AppleID and password. Whenever I try I keep getting the 'connection failed' error message.
    Any ideas anyone???...
    Stuart.

  • Flash Player: Connection failed. Unable to complete installation. Mac OSX

    I'm working on a mac running 10.10.1 Yosemite in Safari. My current Flash version is 15.0.0.
    On most videos and pictures it now says 'Your Flash Player is out of date".
    I've clicked on this icon, which opens saying do you want to download the newest version, and clicked yes.
    I've downloaded Adobe Flash Player Update several times.
    The downloading always works, the problem is with the installation:
    It failed the first time, and all following times it 'picks up' at about 30% then goes up all the way to 97% (sometimes 99%) and then says: Connection failed. Unable to complete installation.
    I've tried all the links in the forums saying download directly from here: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg - but safari can't find the link.
    I wanted to deinstall Flash Player and found this link on the adobe website(Uninstall Flash Player | Mac OS): http://fpdownload.macromedia.com/get/flashplayer/current/support/uninstall_flash_player_os x.dmg -> but it says "Safari can't find the server fpdownload.macromedia.com" so I can't even uninstall it!
    I have no idea what else to try???
    I also tried to open all those links in Firefox and Chrome and they weren't found there either.
    Has anyone ideas what I can do? All the links that I found in the forum which solved the problem for others are 'not found' when I click on them.
    Thanks for any tipps!!!

    How to perform a "clean install" of Flash Player in Mac OS X
    I wrote those instructions. They're how I installed Flash Player on my new Mini.

  • Connection failed on Safari for Mac

    I have a problem on a single site that is using Flash player to broadcast video news. Some time ago using Firefox I've got already a Connection failed error, whilst from another Mac there are no problem at the same time. Switching on Safari seemed to solve the issue as the connection issue wasn't present. Now I've got the same problem on Safari too, whilst on the other Mac everything keeps working flawlessy. I'm focusing the issue about something related to permissions as the user who has problems on that Mac has a managed profile, even though has no restrictions running applications (His dock is blocked to avoid her, a 81 years-old lady, to do a mess with the icons on it(!)), and accessing my admin profile on the same mac everything works fine with that site. I have already rebuild permissions on the disk, but no lack. OS is Leopard. Processor is Intel. Please help. Thank you.

    To andy.... Sheez, thank you for pointing out the Vimeo video. I'd completely forgotten it was there. Some pages rarely get attention. They're just there.
    What are "cursor images"?
    "What OS & Safari version were the problems noted with ?". Wish I could tell you, but even if I'd gotten the information first hand, I'm not sure this particular population would know the answer themselves. (They tend to be quite elderly - and I say that as a 70 year old myself - and probably still use AOL for email.) All I've been told is that several people haven't been able to get the site to work. The few mentioned whom I know do use Safari on an iMac, so I'm jumping to the conclusion that that this applies to most if not all.
    Had a LOL moment when you said "the web inspector went silly." See my response to Bee about Xara Web Designer. Xara would make any web inspector want to go back to being a spell checker.

  • "connection failed" mac app store

    When attempting to purchase/download apps from my Macbook w/Lion OS using App Store I am asked to log in where I get "Connection failed." message.  Also I cannot sign in to my account from the App Store.  I can access everything else on the internet and even log in to apple.com. Everything was fine up until a few days ago when I upgraded to Lion.
    How can I fix this?

    This is a bug in Lion 10.7.4 and to get more info look at this post:
    https://discussions.apple.com/message/18353267#18353267
    I have tried what I posted above and it got rid of the AppStore issue for me, but there may be other issues that are related to certificates:
    I had many error messages saying invalid certificate on websites like hotmail and others since updating to Lion 10.4.7
    Also my bank site and others gave same error while before it never did so!
    Come on, Apple solve the bug in Lion without forcing us to buy Mountain Lion because of a bug!!
    Here is the message that solves the issues so far from above thread:
    antonyoung
    Re: Invalid Certificate on every secured website 
    Jun 9, 2012 4:40 PM (in response to quickSti)
    Thank you quickSti! This finally solved the problem for me.
    quickSti wrote:
    I solved this on my wife's computer by resetting the security certificate settings.  This might help others:
    Close all windows.
    Keychain Access ->  click on System Roots on the left, and then click on Certifcates on the bottom left.
    Check to see if any of the certificates on the right have the blue "+" symbol - this means they have custom trust settings.
    There is a bug in changing the policies, so you'll have to change them via the method below.  Changing them just by changing the access to "system defaults" doesn't seem to save.  The method below worked for me.
    Double-click on each certificate with the custom setting (blue "+"), expand the section labled "trust".  Change the "Secure Sockets Layer (SSL)" setting to "no value specified".  Close window - you should be prompted for the password.  Double-click on the certificate again, expand trust, change the "When using this certificate" setting to "Use System Defaults".  Close window, and re-enter password.
    If you didn't re-enter your password upon closing the window, the setting didn't take.  The blue "+" should disappear after a few seconds when it's set back to default.  Once all of the certificates are changed back to default, restart Safari.
    This solved all of the problems for my wife's computer with these issues and OSX 10.7.4
    Thank you to everybody who helped with this bug...

  • MAC OS X Connection failed, retry in progress SCCM

    Hi everyone,
    I give up so just looking for a new solution to agent deployment on MAC OS clients!
    I tried everything and everything but there is no way! Here it is my configuration;
    System Center 2012 R2 Configuration Manager, Windows Server 2012 R2
    Certification Auth. (Enterprise), Windows Server 2012
    Mac OS X 10.6
    Please take a look to my logs;
    No Preferences found for Key - 'SMSID', Domain - 'com.microsoft.ccmclient'.
    1.1.1601 00:00:00 0 (0x0000)
    Status of SecKeychainGetCSPHandle : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeyGetCSSMKey : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeyGetCredentials 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of CreateSignatureContext : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeychainGetCSPHandle : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeyGetCSSMKey : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeyGetCredentials 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of CreateSignatureContext : 0 1.1.1601 00:00:00
    0 (0x0000)
    No Preferences found for Key - 'OMAMaxMessageLimit', Domain - 'com.microsoft.ccmclient'.
    1.1.1601 00:00:00 0 (0x0000)
    MaxMessageSize from Config file is <= 25KB. Defaulting to 49152
    1.1.1601 00:00:00 0 (0x0000)
    No Preferences found for Key - 'SMSID', Domain - 'com.microsoft.ccmclient'.
    1.1.1601 00:00:00 0 (0x0000)
    Failed to GetProperty Mode from Configuration Provider : 80070490
    1.1.1601 00:00:00 0 (0x0000)
    No Preferences found for Key - 'SMSID', Domain - 'com.microsoft.ccmclient'.
    1.1.1601 00:00:00 0 (0x0000)
    Status of SecKeychainGetCSPHandle : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeyGetCSSMKey : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeyGetCredentials 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of CreateSignatureContext : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeychainGetCSPHandle : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeyGetCSSMKey : 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of SecKeyGetCredentials 0 1.1.1601 00:00:00
    0 (0x0000)
    Status of CreateSignatureContext : 0 1.1.1601 00:00:00
    0 (0x0000)
     SSL Connection failed. HTTP Response code is 403 and reason is Forbidden
    1.1.1601 00:00:00 0 (0x0000)
    OMA Session failed with error code 0x80004005
    1.1.1601 00:00:00 0 (0x0000)
    Failed to connect to DMP 1.1.1601 00:00:00
    0 (0x0000)
    OMA : Sending Notification to UI : <CCMClientNotification><Sender>Service</Sender><Name></Name><Id></Id><Type>CCM_OMA</Type><State>Error</State><Data>-2147467259</Data><Data2></Data2><Data3></Data3><Data4></Data4></CCMClientNotification>
    1.1.1601 00:00:00 0 (0x0000)
    No Preferences found for Key - 'OMAFailureRetryDelayInSec', Domain - 'com.microsoft.ccmclient'.
    1.1.1601 00:00:00 0 (0x0000)
    CCMClient - Broadcasting Msg to UI : <CCMClientNotification><Sender>Service</Sender><Name></Name><Id></Id><Type>CCM_OMA</Type><State>Error</State><Data>-2147467259</Data><Data2></Data2><Data3></Data3><Data4></Data4></CCMClientNotification>
    1.1.1601 00:00:00 0 (0x0000)
    Thanks.

    Yes, I know this is an old post, but I’m trying to clean them up.
    It look like from the error message that there is a certificate issue.  Did you check to make sure that your certs are right?
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks fo

    I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks for any help you may provide

    hi,
    somewhere on the windows machineshould be something like "network setup wizard". exactly where it is and what it is called i cannot remember off the top of my head, windows help is actually slightly useful here, it should have a link to it.
    all the options checked on the mac are only what services the mac is offering to other machines, they have nothing to do with the services it can access (mostly...).
    oh yeah, to actually connect to the pc after you have turned its sharing on, use the finder, or, when it does not show the pc (this happens on and off, possibly a refresh problem apple...) choose go --> connect to server and enter smb://<pc's name or ip>
    to find the ip, the easiest way i think is
    start --> run --> cmd ->> ipconfig
    Andrew
    Message was edited by: Andrew Dicker

  • Dont connect with mac AppStore and iTunes store, but Safari and other apps is working good. pleeeease help.(OS X 10.8.5)

    Dont connect with mac AppStore and iTunes store, but Safari and other apps is working good. pleeeease help.(OS X 10.8.5)

    Error message?

Maybe you are looking for

  • Home page banner is slow loading

    I am creating a new corporate web site which has two .swf files on the home page and at the top is a small banner file (30k). For some reason, this banner takes 5 - 10 seconds to load and it happens well after both .swf files have loaded. Here's a UR

  • When I connect an iPad to a Mac, which photos are available for import?

    I seem to have created an ever-growing, self-multiplying population of photos shared between my Mac, my iPad, my iPhone, and iCloud! I'm trying to clear everything up and start from scratch, but one thing in particular is bothering me. I connect my i

  • How do I print out receipt for the App I have bought?

    I need to print out the receipt I have bought in the past, how can I do this? I have found the list of them on iTunes but how do I print it out? P.S. I have deleted the Email for this, so need another solution

  • I cant watch youtube vids, listen to music from some sites or videos from FB or anywhere else. Help!

    I cant watch youtube vids, listen to music from some sites or videos from FB or anywhere else. Help! I have read some of the help answers but the Flash settings change hasnt helped me. I am on tumblr, soundcloud, Fb etc and Im frustrated that I cant

  • Dos not reading Java

    hi I have read previous posts and added SET PATH statement in the AUTOEXEC.BAT file to point to the jdk folder and lib file on my system.This resulted in the WIN.COM file not being read and windows not booting.I got around this and edited AUTOEXEC.BA