Mac-Authen in 1141 AP not working with WPA!

I want to have my stand-alone 1141 to do Mac-Authentication locally and have WPA running to let the AP run in 11n mode but it is not running. I have tried having an No Encr and Mac-Authentication and it works.
I have read an article that WPA and Mac-Authentication don't work together. Is it right?
Please enlighten me on this.

Hi,
indeed the simplest is to have WPA and mac filters. Mac authentication allows to authenticate mac addresses against radius. Mac filters is an access list with mac addresses stored on the AP itself.
ap(config)#dot11 association mac-list ?
  <700-799>  Ethernet address access list
You can then configure an ACL (with number between 700 and 799) to go with that.
Regards,
Nicolas

Similar Messages

  • When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

  • AX will not work with WPA

    My AX worked successfully with WPA security for several months, then stopped. I reset it, hard and soft, used factory default, but it would not work with WPA. Changed the security to WEP 128 and it worked fine. But now my Macbook Pro won't connect automatically. I have to run diagnostics to reconnect every time I started the computer.
    Went back to WPA, now my Macbook Pro connects fine again, but the AX won't won't connect. Airport utility recognizes it when I reset it, but when I go thru the configuring process with Airport Utility, AX always fails on the last step, saying it could not join the network after it restarted.
    Does this make any sense to anyone?

    Henry,
    Thank you for explaining Duane's approach. Immensely helpful! And, of course, in retrospect, makes complete sense. I'm sure there is a kb article on this somewhere....... ?
    Which brings me to something in your post:
    "do a hard reset of the Airport Express and use the Airport Setup Assistant to reconfigure it from scratch"
    Am I missing something here because after installing Leopard, Airport Utility is the only Airport app I have in my Utilities Folder? I do remember Airport Setup Assistant being part of Tiger (but that disappeared as did the functionality of several other Airport apps (Airport Admin, etc.) after upgrading to Leopard.
    So, IS there an equivalent in Leopard of the Airport Setup Assistant? Or do I use the Network app in Sys Prefs to Join an already existing network (going the route of a hard reset of AX)?
    Usually, David Pogue's MM book on OS X is helpful in filling in the gaps, but his new Leopard book seems a bit sketchy this time on setting up a wireless network. I think this subject (setting up a wireless network, etc.) could almost get a MM of it's own!
    If I may, can I address a related issue? Previously, in setting up the AEBS and AX to work together you do end up with what LOOKS like TWO networks (both have their own Apple network numbers and letters) even though they are working in tandem as 1 network, right?
    I bought the AX to extend the range of my network because it seemed the signal from the AEBS was not quite strong enough. I set it up to be a "remote" to the AEBS's "main." I also use the AX to stream iTunes to my living room's sound system.
    Again, many thanks for your help.
    Message was edited by: WildBill

  • Mac book pro Retina is not working with vga adapter to video projector

    I want to connet to video projectors, With vga adapter i can't connect to the video projector and also my mouse will not work properly, it becomes very slow and I can't work it. With dvi adapter combined with vga, the mouse is fine, but I can't connect to the video projector. Mirroring is my setting. I have tried several video projectors. What shall I do?

    Adjust the volume control located in the lower left corner of the YouTube Video Player.

  • Wireless-Card doesn't not work with WPA/WPA2 but with WEP [Solved]

    Hello I have a MacBook (late 2007) with a wireless-card from Broadcam, the card works with WEP and the classic configuration over rc.conf very well. But I can't get the card running with WPA and the net network-profiles.
    Here is the link to the driver - http://www.broadcom.com/support/802.11/linux_sta.php
    eth2 = wireless-card
    eth1 = firewireanything
    eth0 = wired-card
    rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="UTC"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Berlin"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    #MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="macbook"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
    INTERFACES=(!eth0 !eth1 eth2)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.1.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    NETWORKS=(wireless)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
    /etc/network.d/wireless
    CONNECTION="wireless"
    INTERFACE=eth2
    HOSTNAME=macbook
    IP="static"
    IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
    GATEWAY=192.168.1.1
    DNS1=192.168.1.1
    # Wireless Settings (optional)
    ESSID=3Com
    #KEY=
    IWOPTS="mode managed essid $ESSID channel 11"
    #WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
    # that is linked to the real $INTERFACE
    #WIFI_WAIT=5 # seconds to wait for the wireless card to
    # associate before bringing the interface up
    USEWPA="yes" # start wpa_supplicant with the profile
    WPAOPTS="" # use "" for normal operation or specify additional
    # options (eg, "-D ipw")
    # see /etc/wpa_supplicant.conf for configuration
    Can I set here the WPA/WPA2-Key also? Why here ESSID? Do I need still a configuration in wpa_supplicant.conf?
    Thats very confusing and not explained.
    WPAOPTS? Do I need to add something like "-D wext"?
    /etc/wpa_supplicant.conf
    # This is a network block that connects to any unsecured access point.
    # We give it a low priority so any defined blocks are preferred.
    ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
    network={
    key_mgmt=NONE
    priority=-9999999
    network={
    ssid="3Com"
    proto=WPA
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk="topsecret"
    priority=5
    # WPA2
    # proto=WPA RSN
    I need help. Please
    Last edited by hoschi (2009-01-04 20:21:58)

    fwojciec wrote:If this info is not in the wiki it might be worth it to add it -- it's all detailed in /etc/network.d/examples/complete.example though.
    Thats the reason why I was so confused.
    My new and well working configuration:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="UTC"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Berlin"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    #MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="macbook"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
    INTERFACES=(!eth0 !eth1 !eth2)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.1.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    NETWORKS=(3com)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
    CONNECTION="wireless"
    DESCRIPTION="Very verbose complete wireless example"
    INTERFACE=eth2
    HOSTNAME=macbook
    # Interface Settings (use IP="dhcp" for DHCP)
    IP="static"
    IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
    GATEWAY=192.168.1.1
    # DNS Settings (optional)
    DOMAIN=localdomain
    DNS1=192.168.1.1
    DNS2=
    SEARCH=
    # Standard Wireless Settings
    ESSID=3Com
    SECURITY=wpa-config # One of wep, wpa, wpa-config, none
    KEY=""
    # Scans to see if network is available before connecting (reccomended)
    SCAN="YES"
    # Time to wait to connect to a network. Default 15.
    TIMEOUT=10
    # Pass *custom* options to iwconfig. Usually not needed (optional)
    IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
    # Any extra arguments for wpa_supplicant
    WPA_OPTS=
    # For SECURITY='wpa-config' only - filename of a wpa-supplicant config
    WPA_CONF=/etc/wpa_supplicant.conf
    # This is a network block that connects to any unsecured access point.
    # We give it a low priority so any defined blocks are preferred.
    ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
    network={
    key_mgmt=NONE
    priority=-9999999
    network={
    ssid="Linksys"
    proto=WPA RSN
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk="areulookingatmybreasts"
    priority=5
    network={
    ssid="3Com"
    proto=WPA
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk="nomam"
    priority=5
    # WPA2
    # proto=WPA RSN
    There are also profiles for the Linksys-Router and for wired cable.
    Thanks for the help!
    Last edited by hoschi (2009-01-04 20:21:23)

  • Lync for Mac 14.0.10 (141024) not working with latest OS X Yosemite

    Hi -- I am having issues logging in to Lync.
    I recently installed OS X Yosemite 10.10.1 and installed Lync for Mac 14.0.10 (141024) and I have not been able to log in to Lync. When I try to sign in, I get the error message "Sign in to Microsoft Lync failed because the service is not available
    or you may not be connected to the internet." I get this error message even though I am logged in to my company's network/internet.
    Is anyone else having this problem and is there a solution?
    Thanks!

    Yes! I've been wrestling with this problem all day! I've tried manually setting the server names, removing stored credentials, removing keychain entries, and finally clean uninstall/reinstall. No luck.
    This line comes up a lot in my logs.
    12/15/2014|15:02:46.771 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    Here's the majority of the errors from my log, trimmed down to fit into this post.
    12/15/2014|14:58:44.678 185:A0B271D4 ERROR :: RtcGetPlatform(): 10.10
    12/15/2014|14:58:44.678 185:A0B271D4 ERROR ::  Failed to init PANOVideo[79B351F0], 80070002
    12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: No device Id to load PANOVIDEO
    12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: HRESULT failed: 80ee002d = hr . get_AudioSinkDevices
    12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: HRESULT failed: 80ee002d = hr . LoadDevices
    12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: virtual HRESULT CRTCMediaController::LoadDeviceSettings() Failed while loading device- 3 with 80ee002d. 
    12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
    12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
    12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
    12/15/2014|14:58:45.448 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:45.448 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:45.458 185:A0B271D4 ERROR :: LoadCustomTelephonyDeviceCollection: HRESULT failed: 80070002 = hr. Audio capture
    12/15/2014|14:58:45.458 185:A0B271D4 ERROR :: LoadCustomTelephonyDeviceCollection: HRESULT failed: 80070002 = hr. Audio capture
    12/15/2014|14:58:45.460 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:45.461 185:A0B271D4 ERROR :: Unable to register the event source for Lync - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|14:58:45.461 185:A0B271D4 ERROR :: HRESULT SipStackGlobalInit() - Failed registering the event log source: 2
    12/15/2014|14:58:45.472 185:A0B271D4 ERROR :: HRESULT SIP_STACK::RegisterIPAddrChangeNotification() - WSAIoctl did not return WSAEWOULDBLOCK as expected
    12/15/2014|14:58:45.472 185:A0B271D4 ERROR :: void SIP_STACK::InitPlatformAuthCaps() - EnumerateSecurityPackages failed 0x80000001
    12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 2. Ignore any error. hr=80070057"
    12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 6. Ignore any error. hr=80070057"
    12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 5. Ignore any error. hr=80070057"
    12/15/2014|14:58:45.535 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 1 has 1 credentials"
    12/15/2014|14:58:45.535 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|14:58:45.768 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|14:58:46.308 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:46.309 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:46.309 185:A0B271D4 ERROR :: OnActiveAudioDeviceChange: "Error: hr = 80000003"
    12/15/2014|15:00:07.918 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
    12/15/2014|15:00:08.008 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:00:08.068 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:00:08.069 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:00:08.071 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:00:08.111 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
    12/15/2014|15:00:08.176 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
    12/15/2014|15:00:08.183 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.183 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.189 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.189 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.194 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.194 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.199 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.199 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.204 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.204 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.209 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.209 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.214 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.214 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.219 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.219 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.224 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.225 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.229 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.230 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.234 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.235 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.240 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.240 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.245 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.245 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.251 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.251 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.257 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.257 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
    12/15/2014|15:00:08.277 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
    12/15/2014|15:00:08.448 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:00:08.681 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|15:00:08.736 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:00:08.776 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
    12/15/2014|15:00:23.871 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableSubscriptionManager
    12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisablePublicationManager
    12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableUserSearchManager
    12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. failed to disable the endpoint
    12/15/2014|15:00:23.884 185:A0B271D4 ERROR :: DWORD SIP_MSG_PROCESSOR::GetLocalConnectionAddrSubnet() get subnetmask failed
    12/15/2014|15:00:23.956 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:00:23.956 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=erobr, passwordAvail=1, cert=00000000, userCert=0"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|15:00:25.116 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:00:25.126 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:00:26.963 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) connect failed 80072743 retry connecting via HTTP tunnel
    12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) UseHttpProxy failed
    12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: Releasing connection and notifying transactions
    12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::NotifyRequestConnectionConnectComplete(HRESULT) - Error: 80072743
    12/15/2014|15:00:28.983 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
    12/15/2014|15:00:29.023 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
    12/15/2014|15:00:29.023 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
    12/15/2014|15:02:46.771 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.845 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
    12/15/2014|15:02:47.845 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.846 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.867 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:47.867 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:47.868 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.868 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.870 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
    12/15/2014|15:02:47.871 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
    12/15/2014|15:02:47.915 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.915 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/1
    12/15/2014|15:02:47.924 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|15:02:47.942 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:47.942 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
    12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseStatusLine(const CHAR*, SIZE_T, SIZE_T*, SIP_MESSAGE*) ParseSipVersion failed 80000008
    12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: ParseStartLine failed hr: 80000008
    12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseSipMessageIntoHeadersAndBody(CHAR*, SIZE_T, SIZE_T*, BOOL, SIP_MESSAGE*, bool) ParseStartLine failed
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: HRESULT CSIPMessageCollator::ProcessCollatedData() Parsing collated data into a SIP message failed: 0x80000008
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: virtual HRESULT CSIPMessageCollator::OnRecv(HRESULT, BYTE*, DWORD) Failed to process the accumulated data.
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnRecv(HRESULT, BYTE*, DWORD) (80000008) this: 7867D738. Setting CSIPClientConnection state to disconnected
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80000008) this: 7867D738 - Enter
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::ReleaseRequestConnectionAndNotifyOutgoingTransactions(HRESULT) this: 78AE1408 - Exit
    12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7867D738 - Exit
    12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnDisconnect(HRESULT) (80072746) this: 7867D738
    12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80072746) this: 7867D738 - Enter
    12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7867D738 - Exit
    12/15/2014|15:02:48.244 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnConnectionError(HRESULT) - error: 80ee0067
    12/15/2014|15:02:50.255 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80ee0067/0"
    12/15/2014|15:02:50.290 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:50.290 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:50.345 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80ee0067 (no auto-recovery)"
    12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
    12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
    12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=erobr, passwordAvail=1, cert=00000000, userCert=0"
    12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
    12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|15:02:50.349 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80ee0067, diagCode=0"
    12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
    12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.783 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.785 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
    12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
    12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
    12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
    12/15/2014|15:02:55.804 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.812 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|15:02:55.830 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:55.830 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseStatusLine(const CHAR*, SIZE_T, SIZE_T*, SIP_MESSAGE*) ParseSipVersion failed 80000008
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: ParseStartLine failed hr: 80000008
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseSipMessageIntoHeadersAndBody(CHAR*, SIZE_T, SIZE_T*, BOOL, SIP_MESSAGE*, bool) ParseStartLine failed
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: HRESULT CSIPMessageCollator::ProcessCollatedData() Parsing collated data into a SIP message failed: 0x80000008
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPMessageCollator::OnRecv(HRESULT, BYTE*, DWORD) Failed to process the accumulated data.
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnRecv(HRESULT, BYTE*, DWORD) (80000008) this: 7C0FBB18. Setting CSIPClientConnection state to disconnected
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80000008) this: 7C0FBB18 - Enter
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::ReleaseRequestConnectionAndNotifyOutgoingTransactions(HRESULT) this: 7A529008 - Exit
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7C0FBB18 - Exit
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnDisconnect(HRESULT) (80072746) this: 7C0FBB18
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80072746) this: 7C0FBB18 - Enter
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7C0FBB18 - Exit
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnConnectionError(HRESULT) - error: 80ee0067
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80ee0067/0"
    12/15/2014|15:02:58.073 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:58.079 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80ee0067 (no auto-recovery)"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=DOMAIN_NAME_REMOVED\USER_NAME_REMOVED, passwordAvail=1, cert=00000000, userCert=0"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|15:02:58.082 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80ee0067, diagCode=0"
    12/15/2014|15:02:59.921 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:03:06.314 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:03:06.314 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:03:06.315 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:03:07.574 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
    12/15/2014|15:03:07.574 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:03:07.600 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
    12/15/2014|15:03:07.606 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
    12/15/2014|15:03:07.618 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:03:07.625 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|15:03:07.644 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:03:07.644 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
    12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) connect failed 80072743 retry connecting via HTTP tunnel
    12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) UseHttpProxy failed
    12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: Releasing connection and notifying transactions
    12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::NotifyRequestConnectionConnectComplete(HRESULT) - Error: 80072743
    12/15/2014|15:08:09.024 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
    12/15/2014|15:08:09.025 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80072743/0"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:08:09.032 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80072743 (no auto-recovery)"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=DOMAIN_NAME_REMOVED\USER_NAME_REMOVED, passwordAvail=1, cert=00000000, userCert=0"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|15:08:09.036 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80072743, diagCode=0"
    12/15/2014|15:18:06.842 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:18:06.842 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"

  • Airport Express not working with WPA

    Recently with the newest Macbook Pro airport firmware, my WPA2 network has stopped working so I switched over to WEP, and it started working again. I have a new Airport Express, and I hooked it up to the WEP network and it worked fine.
    Just the other day I found out that disabling UPNP can make WPA work again, so I tried it out and my WPA2 network started working again. However, when I reset my Airport Express and tried to hook it up to the WPA2 network it wouldn't work. I could get through the entire setup but when I got to the end, when the Airport Express reset itself, the network would just die, and then I would have to hard reset the Airport Express again.
    I'm using a Dlink 624.
    I'm really frustrated by all this. I normally don't have any issues, but this latest Macbook Pro firmware seems to have really messed everything up.

    I would suggest, reconnecting the Express to the TC again. Use the AirPort Utility to make ALL configuration changes including the network extending settings. Then restart both base stations and check that the settings are still good. Then disconnect the Express and give it a few minutes to initialize. It should connect. If not, then the issue may be either the distance or obstructions (like walls, ceilings, floors, etc.) that is preventing the Express from getting a signal from the TC that is adequate enough to extend.

  • RV082 UPnP not working with Back To My Mac

    I have several Mac based applications that are not working with UPnP on my RV082 router. It's not listed as a compatible router on Apple's MobileMe Back To My Mac hardware compatibility list. Is there a way to manually configure port forwarding for this application?
    Another application that requires UPnP that is not working is El Gato EyeTV.
    UPnP is on, and some applications on some computers are clearly able to open ports via UPnP.
    I have firmware version 1.3.98-tm.

    You will need to contact the vendor/manufacturer of the specific non-Cisco applications (Back to My Mac & El Gato EyeTV) for those application instructions, we don't support them on here.  if the RV082 is working with other devices/applications, then I'd believe that it's specific to those non-Cisco apps that you would need to troubleshoot with the specfic vendors on.
    Best Regards,
    Glenn

  • 27" TFT TV not working with my mac mini

    My brand new mac mini does not work with my 27" TFT TV (D-Boss) using the DVI connection. The mac mini works fine if connected to a 17" or 20" TFT display, but the screen of my TV is black and I get the error message "out of range" (strange with digital). The TV is working with my Windows laptop (analog and digital). I really have no idea where the problem is. Somebody can help me?
    Thanks
    -Linus

    10.9.1
    This is the pop up message that I get when I try to load the set up file from the disc.
    "You can’t open the application “HP Installer” because PowerPC applications are no longer supported."
    Thanks for your help

  • My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

  • Mac mini late 2012 not working with small VGA monitor

    I got a mac mini (late 2012 10.8.4 all updates installed) and it is working fine with samsung b2230 via VGA adapter. There is a small VGA monitor (PL8006 max at 1024*768) which works fine when connected  to a PC.
    When I connect the small VGA monitor to mac mini it is not displaying anything (monitor shows blue screen with letters VGA so I assue it is not getting any signal). Mac's resolution is set to 1024*768 with 60Hz (even tried with 800*600 without any success). Monitor is also not working with win 7 installed in mac mini using bootcamp.
    Any thoughts?

    i just found that when the VGA cable of the small monitor is slightly inserted into the VGA adaptor it works fine (this is not usable because there is no way to keep the pins at that level) and when the pins inserted fully / moved little it is not working. Since this happens only between these two devices can't find which one is faulty.

  • Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

    Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

    You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • In context not working with Mac Safari 6.04

    Hi there just noticed
    in context not working with Mac Safari 6.04, you can edit text, and save and publish but editable marquees are no longer visible especially the repeating elements?

    Hi Vicki,
    I would suggest submitting a support case on this for further investigation. 
    Unfortunately I'm on a PC machine so I cannot confirm on my end.  Please reach out to direct support ASAP if the issue is still existing. 
    - http://helpx.adobe.com/contact.html
    Kind regards,
    -Sidney

  • Graphite base station not working with my Intel Based Mac Mini and iPhone.

    My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
    Message was edited by: Soriano

    I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
    In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
    The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
    The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
    After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
    The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
    I hope this helps.

Maybe you are looking for

  • Default logical system for usersettings

    Dear Experts, I hope you can help me with the following question: We use SRM 7.0 with multiple backend systems. If the endusers want to default their cost centers in SRM via the portal themselves by clicking on "Usersettings" and selecting the attrib

  • Doesn't display the sound line.

    I use HP Pavilion dv7 and when I slide the volume with finger using the touch buttons - on the screen shows a line that messure the volume. Now it's gone. The volume otherwise is alright. I just can't see the line. This question was solved. View Solu

  • Knowledge management Functionality  - C4C

    Hi , I am going to work on C4C project  and this my first C4C project with Marketing Sales and  Service as part of the scope. Our Client also have knowledge management functionality as part of the legacy. My question or my concern is  that I am aware

  • DNS replicating but not being dynamically updated by other DCs

    Background on setup: Our campus runs BIND for the DNS solution Campus servers do not allow for dynamic updates of the root zone (school.university.edu), but are set to allow dynamic updates of the AD-related zones (_msdcs, _sites, _tcp, _udp, DomainD

  • Media Sync doesn't offer option to sync Camera Photos.

    I was trying to setup Link to sync my camera photos back to my desktop via wifi.  When I get in range the mapped drives of my Z10 appear as Y: and Z:.  My camera photos are then accessible via Y:\camera (which is TOO COOL by the way). But, when I go