MAC authentication failed for Wired Users
Hi,
I tried to configure MAC authentication for registed users by ACS. But failed. Need help.
ok ok..i got ur point....please correct me the config steps:
1. Added switch as aaa client into acs
2. entered machine mac address into acs user-setup as both usename & password.
3. in 64,65 & 81 (in bother group & user setup) choosed 64=vlan; 65=802; 81=authenticated_vlan_id
4. in switch
aaa new-model
aaa authentication dot1x default group radius
radius-server host acs_ip auth-port 1645 acct-port 1646 key ****
dot1x system-auth-control
int fa0/1
switchport mode access
dot1x mac-auth-bypass
dot1x port-control auto
dot1x reauthentication
dot1x pae authenticator
dot1x guest-vlan 900
Note: Whenever i issue the command "port-control auto" the line protocol of the port goes down.
5. in end machine disable ieee 802.1x authentication.
I will try this setting tomorrow & update you accordingly.
Similar Messages
-
Tacacs authentication fails for one user account for only one switch
Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
Socket opens: 157
Socket closes: 156
Socket aborts: 303
Socket errors: 1
Socket Timeouts: 2
Failed Connect Attempts: 0
Total Packets Sent: 1703
Total Packets Recv: 1243
Expected Replies: 0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
PraseyHi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad -
PEAP authentication failed for wireless users
Dears
Hello
i'm receiving this error when i'm trying to authenticate wireless users using PEAP MSCHAPv2. can anyone please support me.
thanksDear Neno
the customer has sent me this in aruba
aaa authentication dot1x "dot1xProfile"
termination eap-type eap-peap
termination inner-eap-type eap-mschapv2
aaa authentication-server radius "SERVER"
host x.x.x.x
key xxxx
nas-ip x.x.x.x
aaa server-group "RADIUS-GROUP"
auth-server “SERVER”
aaa profile "KSAU-JED-AAA-Profile"
authentication-dot1x "dot1xProfile"
dot1x-server-group "RADIUS-GROUP"
wlan virtual-ap "SSID-NAME"
aaa-profile "KSAU-JED-AAA-Profile"
ssid-profile "SSID-NAME"
vlan <VLAN ID> -
Cisco ISE User Authentication Certificates for Wired and Wirless Users (BYOD)
Can any one tell me from where we can purchase User Authentication Certificates for Wired and Wireless Users (BYOD) for Cisco ISE. Also Confirm what certificates we required for the purpose.
Please suggest the Website form where we can purchase and ipmort in Cisco ISE certificate Section.
Thanks.Dear Mohana,
Thanks for your reply, Can you please confirm me in regards EAP-TLS certificate, which authorities you recomend if i go to Go dadday or very Sign to buy it and then import in ISE.
Looking forward for your reply.
Regards,
Muhammad Imran Shaikh
Resident Engineer, IT Network Section - PPL
Mobile : 0092-312-288-1010
LinkedIn : pk.linkedin.com/pub/muhammad-imran-shaikh/10/471/b47/ -
NoMachine(freenx) Authentication failed for user (MYUSERNAME)
Hi all,
I have quite a few experience with freenx on other linux distributions, but this is my first time setting up freenx on archlinux. After following the instructions in the wiki, authentication keeps failing no matter what I do.
Stuff I've done from the wiki:
1. install freenx
2. add RSAAuthentication yes AllowUsers someuser nx to sshd_config
3. add md5sum to node.conf
4. pacman -S xdialog xterm
5. run "/usr/bin/nxsetup --install --setup-nomachine-key"
6. modify /etc/nxserver/node.conf so that "USER_X_STARTUP_SCRIPT=.xinitrc"
7. pick the right configurations when connecting to my server
I have "exec startxfce4" in .xinitrc.
It always goes up to "Waiting for authentication" and then "Authentication failed for user (MYUSERNAME)" pops up. I think it should not be a XFCE issue since authentication itself didn't even pass. I assume if it is a X window problem, what I would get is something like a blank screen.
I'm using public key, so I didn't really copy anything from the server to my client.
I couldn't think of a second reason why this wouldn't work. Is there any thing obvious that I missed? (If so, please move this thread to the newbie corner. lol)
Any thoughts would be highly appreciated.
Thanks
AweatherHi,
I did update the password in the properties file but still I get the error
BUILD FAILED
C:\product\10.1.3.1\OracleAS_1\bpel\samples\utils\CreditRatingService\build.xml:
79: Authentication failed for user "oc4jadmin" on host
I am able to deploy from JDEV. and could configure as per documentation
Thanks in advance,
Anand
I had to update the <OH>/bpel/utilities/ant-orabpel.properties file for the password and now I can deploy successfully...information was there in the readme file...
Anand
Message was edited by:
AnandP -
Essbase Error 1051440 - Authentication fails for user admin
We are facing a very unique problem...
The application is up & running.. even I can login into the application, can perform member addition, editing & mamage database from planning.... but I get this error while retreiving from excel addin or running scripts.
What I analysed is that this problem is Actually coming when a particular set of members are called anywhere either in scripts or during retreival thru Addin.
Recently we had added one dimension in one of the database of our application. After that that this problem started.
There were fewer Xref functions used to pull data from other cubes.... The problem is cominng with only those set of members where this Xref function has been used.
Even I had changed the formulas & incorporated member of new dimension in the formulas to point to target members....
Can you guys ever had faced such kind of issue....
Please help in resolving....
Complete Error is: msg fromremote site[date n time] Local////Error(1051440) Essbase user[admin] Authentication fails against shared services serverwith Error[30:1005:Authentication failed for user admin. Enter valid credentials.]]Hi,
are you sure that user "admin" has all necessary rights to run your scripts? I have to ask because we sometimes had problems with our admin user... There is an "native essbase server admin" and the admin user in shared services.
We dont had any idea how this could happen but sometimes our admin user changed to the mentioned "native essbase server admin" - you can see it if you are connected as "admin (internal)".
If you are logged in as "admin (internal)" you have to "externalize" this user.
Hope this helps and my bad english is not so much confusing... :-)
Kind regards
André -
Getting mail authentication errors for outlook user sending mail
When Outlook 2010 user attempts to use port 587 to send mail (to himself at this point), we see the following in the server logs:
(User in question can attach to file shares on the same server just fine from his Windows laptop)
Outlook config for outbound server is "port: 587, encryption TLS"
When we connect, we get "connection interrupted by server"
Tried other encryption methods - outlook 2010 states that server does not support the other methods (None, SSL)
SMTPD Logs
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: connect from <Outlook Client Name>[<Outlook ClientAddr>]
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: error: validate response: error: Authentication server failed to complete the requested operation.
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: error: validate response: authentication failed for user=colin (method=DIGEST-MD5)
Jul 29 22:22:58 <servername>.l-n-l.com postfix/master[1407]: warning: process /usr/libexec/postfix/smtpd pid 2306 killed by signal 6
Jul 29 22:22:58 <servername>.l-n-l.com postfix/master[1407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling
Jul 29 22:24:12 <servername>.l-n-l.com postfix/smtpd[2270]: timeout after END-OF-MESSAGE from localhost[127.0.0.1]
Jul 29 22:24:12 <servername>.l-n-l.com postfix/smtpd[2270]: disconnect from localhost[127.0.0.1]
Meanwhile: Mac clients are able to connect to smptd submission port to send mail with no problems. Based on what the logs say, it appears that the Mac mail is using a different authentication mechanism.
Client config for outbound server is "use custom port: 587, Use SSL:Checked, Authentication: MD5 Challenge-Response"
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2261]: connect from <Mac Client Name>[<MacClientAddr>]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2261]: 721FCEC991: client=<Mac Client Name>[<MacClientAddr>], sasl_method=CRAM-MD5, sasl_username=<username>@l-n-l.com
Jul 29 22:19:12 <servername>.l-n-l.com postfix/cleanup[2267]: 721FCEC991: message-id=<[email protected]>
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: 721FCEC991: from=<[email protected]>, size=573, nrcpt=1 (queue active)
Jul 29 22:19:12 <servername>.l-n-l.compostfix/smtpd[2270]: connect from localhost[127.0.0.1]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2270]: E722AEC9A0: client=localhost[127.0.0.1]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/cleanup[2267]: E722AEC9A0: message-id=<[email protected]>
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: E722AEC9A0: from=<[email protected]>, size=994, nrcpt=1 (queue active)
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtp[2268]: 721FCEC991: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.55, delays=0.06/0.01/0.01/0.48, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as E722AEC9A0)
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: 721FCEC991: removed
Jul 29 22:19:13 <servername>.l-n-l.com postfix/pipe[2273]: E722AEC9A0: to=<[email protected]>, relay=dovecot, delay=0.13, delays=0/0.01/0/0.12, dsn=2.0.0, status=sent (delivered via dovecot service)
Jul 29 22:19:13 <servername>.l-n-l.com postfix/qmgr[1800]: E722AEC9A0: removed
Jul 29 22:20:12 <servername>.l-n-l.com postfix/smtpd[2261]: disconnect from <Mac Client Name>[<MacClientAddr>]
Running OS X 10.8.4 with Server 2.2.1.
Any thoughts on what I need to do to make OSX Server mail play nice with Outlook over the submission port?
Thanks in advance!!Ok - so I think I have it almost all sussed. So for all 3 of you who might be reading this, here is what is going on.
1) As I expected, this has nothing to do with the FQDN/Outlook problem. I actually rejoiced when I finally got far enough to have that problem with my Outlook 2007 and 2010 clients. And I don't like the recommended fix for that either. There is another way - more on that in a minute.
2) This problem was all about authentication methods. At present, I have OS X Mail Server set for plain text and APOP only. I will be working to fix this soon - but at present I am unable to find any other combination that permits both Mac Mail and Outlook clients to authenticate properly. Mac Mail wants to use CRAM-MD5 by default. Outlook is so incompatible with CRAM-MD5 that even when there are other authentication methods available on the mail server, if CRAM-MD5 is selected on the Server then Outlook fails miserably no matter how you configure the Outlook client. Caveat: this is my own observation and I still have some experimenting to do. If you know otherwise (or can confirm more definitively), then please speak up!
So here is the working configuration at present:
A) Mail Server authentication set to Custom with PlainText and APOP selected, all others blank.
B) Firewall permits inbound from ports 25 (for mail from "outside"), 587 (submission for authenticated users, TLS) 993 (SSL IMAP), and 995 (SSL POP).
C) Mac POP Clients:
i) For retrieval (POP) In advanced settings, use Port 995, Check "Use SSL", Select APOP for authentication.
ii) For submission (SMTP) : Set port 587 (only), Set Authentication to "Password"
D) Outlook 2007,2010,2013 clients
i) For retrieval (POP), Set "Require secure logon using SPA"
ii) In "More Settings/Outgoing Server" set it to require authentication with same credentials as inbound
iii) In "More Settings/Advanced"
a) Turn on Encryption for the POP3, this should change the port to 995 automatically. If it does not, fix that too.
b) Set outgoing server to 587
c) Set TLS for the encryption type (nothing else will work here)
Once you do 2.A, 2.B, 2.D, you will THEN, finally encounter the FQDN problem.
3) So Apple and a lot of folks here in the forums resolve the FQDN problem by removing one of the restrictions:
Remove "reject_non_fqdn_helo_hostname" from "smtpd_helo_restrictions" in your postfix main.cf file.
I have at least 2 problems with this:
A) It removes yet another little bit of security from the setup
B) It involves non-GUI changes to the config...which is dangerous if you use the GUI, as changes within the GUI will often result in overwrites to your changes outside the GUI. So you can easily lose this fix without being aware of it until one of your Outlook users starts screaming.
The problem is really with Outlook and Windows not sending the FQDN in the first place. So how about we force them to do that instead? It turns out not to be too hard. I found a thread somewhere that goes into this and it works. Further, the solution remains on through reboots AND also can be made part of an automated deployment of a standard config. The only gotcha is you have to edit the registry...so you have to be careful. You only need to do this ONCE though, and the two entries are easy to find.
C) Under HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/Tcpip/Parameters
i) Set Hostname to the FQDN of your host (replace HOST with HOST.domain.com - or .net, or whatever)
ii) Set NV Hostname to the FQDN of your host
iii) Close Regedit and Reboot to have the changes take effect
Once you do this, the FQDN problem for Outlook users goes away.
So I am looking for suggestions to make the SMTP submission more secure. Aside from that, things are working - and I have had to make ZERO changes to config files outside of the Server GUI - a plus as far as I am concerned. -
ERROR: Ldap Authentication failed for dap during installation of iAS 6.0 SP3
I am attempting to install ias Enterprise Edition (6.0 SP3) on solaris 2.8 using typical in basesetup. I am trying to install new Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url ldap://hostname:389/o=NetScape Root user id admin (151: Unknown Error)
Fatal Slapd did not add Directory server information to config Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to restart
LDAP. When finished, press ENTER to continue, or S to skip this step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at javax.naming.NameNotFoundException.<init>(NameNotFoundException.java: 48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I got the following error;
"Cant connect ot the admin server. The url is not correct or the server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login. make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
MadhaviHi,
Make sure that the directory server is installed first. If it is running
ok, then you can try adding an admin user, please check the following
technote.
http://knowledgebase.iplanet.com/ikb/kb/articles/4106.html
regards
Swami
madhavi korupolu wrote:
I am attempting to install ias Enterprise Edition (6.0 SP3) on
solaris 2.8 using typical in basesetup. I am trying to install new
Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url
ldap://hostname:389/o=NetScape Root user id admin (151: Unknown
Error)
Fatal Slapd did not add Directory server information to config
Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to
restart
LDAP. When finished, press ENTER to continue, or S to skip this
step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at
javax.naming.NameNotFoundException.<init>(NameNotFoundException.java:
48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown
Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I
got the following error;
"Cant connect ot the admin server. The url is not correct or the
server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login.
make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
802.1x EAP-TLS for wired users with ACS 5.5
Hi All,
We are configuring a new setup for wired users authentication with 802.1x(EAP-TLS). ACS 5.5 we are using as authentication server.
We have added the root CA(internal) certificate and certifcate for ACS signed by CA. Now We want to check the authentication is working or not . I hope both root CA and identity certifcate also we need to install in the laptops. But I am not sure how to download the certifcates for client machine manually from CA.
Kindly suggest on how to get certificates for clients both manually as well as automatically?
Thanks,
VijayHi Vijay,
for the Wired 802.1x (EAP-TLS) you need to have following certificates:
On ACS--- Root CA, Intermediate CA, Server Certificate
On Client-- Root CA, Intermediate CA, User certificate(In case of user authentication) OR Machine certificae(In case of Machine authentication)
I am not sure which third party certificate are you using, If its in house Microsoft or any other certificate server then you need download the client certificate from the server itself.
In case of Microsoft, There will be a template for user certificate. You can select it and create user certificate
This one is an old document, But has steps to configure Machine certificate for the user, You can see the steps to download user certificate if its Microsoft server:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-server-windows/43722-acs-eap.html#wc-2
In case You are using the third party certificate serevr , Then you need to check with them on how to download the user certificate
Cheers
Minakshi(rate the helpful post) -
Authentication failed for realm level_15
hi,
I'm trying to configure HTTP server to authenticate users with AAA platform. I get the following error while trying to connect with Cisco Configuration Pro:
TNRTAGCS01002#
Apr 23 15:29:42.129 CET: HTTP AAA Login-Authentication List name: default
Apr 23 15:29:42.165 CET: HTTP: Authentication failed for realm level_15 or view_access
Apr 23 15:29:42.165 CET: HTTP: Authentication failed for level 15
Apr 23 15:29:44.193 CET: HTTP AAA Login-Authentication List name: default
Apr 23 15:29:44.225 CET: HTTP: Authentication failed for realm level_15 or view_access
Apr 23 15:29:44.225 CET: HTTP: Authentication failed for level 15
Here's the AAA config:
aaa new-model
aaa group server tacacs+ TACACS_group
server {A}
server {B}
tacacs-server host A key A1
tacacs-server host B key B1
ip tacacs source-interface GigabitEthernet0/0.1900
aaa authentication login default group TACACS_group local
aaa authentication enable default none
aaa authorization config-commands
aaa authorization commands 1 default group TACACS_group if-authenticated
aaa authorization commands 15 default group TACACS_group if-authenticated
aaa accounting exec default
action-type start-stop
group TACACS_groupHi,
Yes, local authentication does work.
I added below the HTTP configuration:
ip http server
ip http authentication aaa login-authentication default
no ip http secure-server
I thought that HTTP would use the default method list for authentication. Is that possible or should I define a seperate AAA method list?
By the way, I always rate helpful posts -
When i was run my web application in everyday morning(after that issue was not reproduced), it was immediatly redirected to logout page
while i perform any task after login.Session_end function was called unfortunately.
Event log as follows
Event code: 4005
Event message: Forms authentication failed for the request. Reason: The ticket supplied was invalid.
Event time: 10/10/2014 10:36:33 AM
Event time (UTC): 10/10/2014 5:06:33 AM
Event ID: a268f3dd45da406dadd78773a858067f
Event sequence: 4
Event occurrence: 1
Event detail code: 50201
Application information:
Application domain: 463c736b-2-130573911817035712
Trust level: Full
The output while session_end() was called is as follows
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Program Files\Common Files\Microsoft Shared\DevServer\11.0\WebDev.WebServer40.exe'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\WebDev.WebHost40\v4.0_11.0.0.0__b03f5f7f11d50a3a\WebDev.WebHost40.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Windows.Forms\v4.0_4.0.0.0__b77a5c561934e089\System.Windows.Forms.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Drawing\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Drawing.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Web\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Caching\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Runtime.Caching.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Build.Utilities.v4.0\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.Build.Utilities.v4.0.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.JScript\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.JScript.dll'
A first chance exception of type 'System.ArgumentNullException' occurred in System.Core.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\d2ac696f\807ca1a9_01cccf01\AjaxControlToolkit.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\0ff769a3\738a1ab9_47e4cf01\myapp.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\48c5da56\c38dd5b4_47e4cf01\WPCSCore.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\1c6f45a6\dd41c2e2_8ed8cf01\wpcsLibrary.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\6a813290\35d3aedf_8ed8cf01\WPWebControls.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Web.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Web.Infrastructure.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.RegularExpressions\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.RegularExpressions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.Services.Design\v4.0_4.0.0.0__b77a5c561934e089\System.Data.Services.Design.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_global.asax.3ly5lssc.dll', Symbols loaded.
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in System.Web.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
'iexplore.exe' (Script): Loaded 'Script Code (Windows Internet Explorer)'.
The thread '<No Name>' (0x2178) has exited with code 0 (0x0).
The thread '<No Name>' (0x22c0) has exited with code 0 (0x0).
The thread '<No Name>' (0x3c4) has exited with code 0 (0x0).
The thread '<No Name>' (0x2198) has exited with code 0 (0x0).
The thread '<No Name>' (0x19e0) has exited with code 0 (0x0).
The thread '<No Name>' (0x21c8) has exited with code 0 (0x0).
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.JScript\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.JScript.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Web.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Web.Infrastructure.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\d2ac696f\807ca1a9_01cccf01\AjaxControlToolkit.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\0ff769a3\738a1ab9_47e4cf01\myapp.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\48c5da56\c38dd5b4_47e4cf01\WPCSCore.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\1c6f45a6\dd41c2e2_8ed8cf01\wpcsLibrary.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\6a813290\35d3aedf_8ed8cf01\WPWebControls.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.Services.Design\v4.0_4.0.0.0__b77a5c561934e089\System.Data.Services.Design.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_global.asax.yz9nltrj.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualBasic\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualBasic.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Deployment\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Deployment.dll'
A first chance exception of type 'System.Deployment.Application.InvalidDeploymentException' occurred in System.Deployment.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll'
WebDev.WebServer40.exe Information: 0 : [Source : ASP.global_asax ] - <No Message>
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Mobile\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Mobile.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml.Hosting\v4.0_4.0.0.0__31bf3856ad364e35\System.Xaml.Hosting.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Entity\v4.0_4.0.0.0__b77a5c561934e089\System.Web.Entity.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Design\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Design.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'A_7ac34899_0878_4547_ab89_13333f2a2da8'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_Web_2vnmaiqi.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_Web_axfwmnjt.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\a9a217f9\93d383b9_47e4cf01\myapp.resources.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
The thread '<No Name>' (0x230c) has exited with code 0 (0x0).
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
Exception was thrown at line 3, column 25599 in http://localhost:51399/myapp/public/jquery-1.7.2.min.js
0x800a139e - JavaScript runtime error: SyntaxError
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
The thread '<No Name>' (0x258c) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : [Source : ASP.login_aspx ] - <No Message>
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Diagnostics.ServiceModelSink\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Diagnostics.ServiceModelSink.dll'
WebDev.WebServer40.exe Information: 0 : [Source : wpcsLibrary.wpcsUserManager.UserAuthenticate ] - <No Message>
A first chance exception of type 'System.IO.IOException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Net.Http\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Net.Http.dll'
WebDev.WebServer40.exe Information: 0 : [Source : ] - <No Message>
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
WebDev.WebServer40.exe Information: 0 : Entering method call dbUtilities
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll'
WebDev.WebServer40.exe Information: 0 : [Source :dbUtilities ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Exiting method call dbUtilities
WebDev.WebServer40.exe Information: 0 : [Source : ASP.accountselector_aspx ] - <No Message>
The thread '<No Name>' (0x24dc) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : [Source : ASP.accountselector_aspx ] - <No Message>
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
The thread '<No Name>' (0x2590) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Users\E849324\myweb\Finalview\NCI\Source\WIN-PAK 2.0 R5\SourceCode\WPCSWEB\myapp\bin\DoorApp.app', Symbols loaded.
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
The thread '<No Name>' (0x1f04) has exited with code 0 (0x0).
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Entering method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call wpcsLibrary.wpcsDataManager.dbUtilities
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Instance.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.set'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
The thread '<No Name>' (0x26c0) has exited with code 0 (0x0).
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Clear'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.List'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.IconImage.get'
Step into: Stepping over method without symbols 'string.IsNullOrEmpty'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Label.Label'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.Name.get'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Label.Text.set'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.Description.get'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.ToolTip.set'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.Add'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.ToArray'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].set'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Web.UI.HtmlControls.HtmlControl.Style.get'
Step into: Stepping over method without symbols 'System.AppDomain.Flags.get'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Web.UI.CssStyleCollection.Add'
The thread '<No Name>' (0x1b04) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : Entering method call ASP.site_master
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Entering method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call ASP.site_master
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'Please post this question to the forums at http://www.asp.net.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
We have a SharePoint Enterprise 2013 system at RTM level. We've installed Workflow Manager 1.0 by following the steps at
http://technet.microsoft.com/en-us/library/jj658588.aspx. For the final step of Validating the Installation we created a simple list-level workflow and verified that the workflow
is invoked successfully. This is working successfully, but only for a single user. If other users in the same site collection try to invoke the workflow on this same list we get the ULS Log Error:
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
followed by:
Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
(as details below).
All accounts that are attempting to use the Test Workflow (both working and non-working user accounts) are valid AD accounts and are included in the User Profile Sync that runs nightly. All have Contribute or Design permission level (and for testing,
Full Control).
What could cause the Claims Authentication to fail when certain users attempt to launch the workflow?
Thank you for your response.
Jim Mac.
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was
not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType,
Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity,
SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdent... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected ...ity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String
encodedIdentityClaimSuffix) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim)
--- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim logi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...nClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.Securi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...tyTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) 94aa5c2d-fa45-9b83-b203-a92b20102583Hi Aries,
I am facing issue with work flow where Workflow goes to Suspend mode.
I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
Following steps are already performed
1.Make sure User profile synchronization is started.
2.Make sure the user is not the SharePoint system user.
3.Make sure the user by whom you are logged is available in User Profile list.
4.Step full synchronization of User Profile Application.
From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
Appreciate any thoughts or solution.
Following are the log files.
<-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
ULS Log
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Authentication Authorization agb9s Medium OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6k Verbose Value for isAnonymousAllowed is : False f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6l Verbose Value for checkAuthenticationCookie is : True f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=18.7574119057031 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.73 PowerShell.exe (0x29BC) 0x2B9C SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {AF89E1D7-C47F-467B-8FD4-D7DC768820EE}
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Parent No
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Getting Site Subscription Id). Parent [S2S] Getting token from STS and setting Thread Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Getting Site Subscription Id). Execution Time=0.341314329055788 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Reading token from Cache using token signature). Parent [S2S] Getting token from STS and setting Thread
Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Reading token from Cache using token signature). Execution Time=7.5931438213516 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajwpx Medium SPApplicationAuthenticationModule: Failed to build cache key for user f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc' Channel:
'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Topology aeax9 Medium SecurityTokenServiceReceiveRequest: LocalAddress: 'http://c1vspwfe01.vitas.com:32843/SecurityTokenServiceApplication/securitytoken.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteSecurityTokenServiceOperationServer). Parent No f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {F17590DF-49D9-439D-86BC-5AE6416BB765} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8b Verbose Looking up site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {3847D5A4-15C6-4AF9-B062-E22BB555DF4F} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ae0tc High The registered mappered failed to resolve to one identity claim. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteSecurityTokenServiceOperationServer). Execution Time=17.1551132895382 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication fsq7 High SPSecurityContext: Request for security token failed with exception: System.ServiceModel.FaultException: The server was
unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in
order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication 8306 Critical An exception occurred when trying to issue security token: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=52.3525336320678 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajezs High SPApplicationAuthenticationModule: Error authenticating request, Error details { Header: {0}, Body: {1} }. Available
parameters: 3001000;reason="There has been an error authenticating the request.";category="invalid_client" {"error_description":"The server was unable to process the request due to an internal error. For more information
about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as
per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} . f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 8nca Medium Application error when access /sites/testrpa2/_vti_bin/client.svc, Error=The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context,
Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationAuthentication(Uri context,
SecurityToken onBehalfOf) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.<>c__DisplayClass4.<GetLocallyIssuedToken>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam)
at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=62.2890618779761 f5bd8793-a53c-2127-8485-418c67f110f6
Regards
Sakti -
Screen sharing fails for one user
Hi
I have an iMac and MacBook Pro, both running Snow Leopard 10.6.5. I have enabled screen sharing on the iMac, and can log in with one of my other user accounts (Greg). This works fine.
When i am on my MBP, logged in as Joe, and logged in as Joe on the iMac, i always get an "Authentication failed", but i can connect as Greg ok... I thought it was to do with the currently logged in user having the same short name, so i tried logging in as Greg on the iMac, and connecting as Joe from the MBP, but still no success.
Is there anything i can check?
Thanks
Joe.Identical short user names on the different computers shouldn't be a problem - I have multiple Macs with identical short user names and have no problem.
As an aside, you don't need to already be logged in on the other computer; the VNC connection, if VNC login is permitted for that iMac user, would simply present the remote VNC client with its login screen, at which point you could login to the iMac as any user that you wanted, even though you made the VNC connection as someone else. Similarly, regardless of who is at the console on the iMac, the authorized VNC client user on the MBP can connect and view(/control) the screen(/keyboard/mouse).
In the iMac's Sys Prefs Sharing, when Screen Sharing is highlighted, what does it say for "Allow Access for:"?
In the iMac's Sys Prefs Security under the Firewall tab, is the Firewall on? If so, in "Advanced..." is the "Block All Incoming Connections" checkbox unchecked? In the application list there, what does it say about incoming connections for Screen Sharing?
Finally, the iMac and the MBP are on the same home LAN, i.e., the MBP is not having to traverse through your home router's firewall, correct? -
ODBC--connection to 'SQL Serverservername' failed for one user but not another
In Win7, we're linking tables in an MS Access 2010 db to tables in a SQL Server 2008 R2 db. The driver user by the File dsn is SQL Server version 6.01.7601.17514 & we're using SQL Server Authentication.
For some reason, one user gets the msg "ODBC--connection to 'SQL Serverservername' failed" before they're even asked for a password, but for other users, the prompt comes up and when they uncheck the Windows Auth box, they enter their password
and connect successfully to the SQL Server db. Both users have db_datareader access to the SQL Server db.
I had the user that gets the error msg log onto my PC and they get the same error (yet it works for me.)
This user was, however, able to successfully relink the tables, but then when we closed the access db and opened it again, the user got the "ODBC--connection..." error agin.
I'm stumped as to why this is happening for one user.Hello Knellen,
Please help to collect more log information regarding this issue, such as windows event log, SQL Sever log information. They are helpful for us to troubleshoot it.
Regards,
Elvis Long
TechNet Community Support -
Cisco ISE authentication failed for Win XP SP3
Hello,
I have some trouble this Win XP wired Client authentication. With Win7 everything works well.
ISE 1.2 (patch 4)
Switch: 2960 / 2960S (15.0.(2)SE2)
Authentication details:
Event:
5400 Authentication failed:
Failure Reason
11514 Unexpectedly received empty TLS message; treating as a rejection by the client
Resolution
Ensure that the client's supplicant does not have any known compatibility issues and that it is properly configured. Also ensure that the ISE server certificate is trusted by the client, by configuring the supplicant with the CA certificate that signed the ISE server certificate. It is strongly recommended to not disable the server certificate validation on the client!
Root cause While trying to negotiate a TLS handshake with the client, ISE expected to receive a non-empty TLS message or TLS alert message, but instead received an empty TLS message. This could be due to an inconformity in the implementation of the protocol between ISE and the supplicant. For example, it is a known issue that the XP supplicant sends an empty TLS message instead of a non-empty TLS alert message. It might also involve the supplicant not trusting the ISE server certificate for some reason. ISE treated the unexpected message as a sign that the client rejected the tunnel establishment.
I try to disable validate server certificates on Win XP Clients, but it won´t work for me.
Add ISE self-sign certificate to clients trusted root certification authorities and enable validate server certificates also won´t work.
Any idea?
thanksThe ISE use a self-signed certificate. I add this self-signed certificate to the clients "trusted root certification authorities", enable validate server certificates at the eap properties and select the added certificate from the trust list. But if I uncheck validate server certificates, I see the same error message as well.
Are there any differences between xp client config and win7 client config?
thanks,
Maybe you are looking for
-
T530: Unbearable fan noise
Probably similar to this thread, the T530 I recently received has fan noise issues. I've invested considerable time in solving this, but found that a solution can be achieved with reasonable effort only by Lenovo: Introduction: Most ThinkPad models d
-
Time machine issues after HD upgrade
I replaced and upgraded my internal HD today in my MacBook Pro (OSX 10.6.5). I restored OSX from my time machine backup to this new drive. However, when I next tried to run Time Machine, it tried to back everything up on the new drive, which is about
-
Does it work outside of the US?
I would like to know it the Airport Extreme works outside the US, and is it a monthly charge or what?
-
Query Takes Along time Execution;;PLZ HELP ME
Hi all, I'm Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 in Linux server. I have a very strange problem, when I execute query from Sqlplus I get my resultset very fast whears when I execute it like a query into one procedure this same qu
-
How/where do I get iTunes for my 64-bit Windows.8 laptop computer?
I cannot connect with the iTunes software I have available; that is, I get an error saying the software i for 32-bit products but my laptop is 64-bit running Windows 8.1. Help!