Mac auto start once shutdown under windows mode in boot camp

This is the situation:
I run windows xp on my macbook pro. When I finished using it and perform shut down, everything is still fine. The problem occurs when I plug in my laptop to a power source when the computer is shutdown. As soon as I connect the power adapter, the computer will automatically start up itself?
Any ideas what's wrong with it?
Thanks for the help.

Hi V.K., I followed the reset steps for PRAM and the problem still exist. Could this be the battery's problem? BTW, my laptop is still fairly new, got it in December.
Thanks for your help

Similar Messages

Mac Mini (early 2012) stuck in Windows 7 after Boot Camp install. Help please!

So today I installed Windows 7 using an .iso file on my Mac Mini and the Bootcamp assistant. It was successful as it installed Windows 7, but when it booted W7, there was no wifi. I know I need to apply the drivers, I didn't see the option using Bootcamp assistant the first time, but I saw that you can go back to OS X and relaunch Bootcamp assistant. So I tried to go back to OSX, but no matter what I tried (holding Option, holding X, trying to reset PRAM), nothing worked. I even tried using an Ethernet cable to connect to the Internet on Windows and download the driver package, but that didn't even work.
Does anyone have any guidance before I take it to see someone?

Welcome to the Apple Support Communities
Try pressing Option key while your Mac is starting. When your Mac shows the bootable partitions, does the OS X partition appear? If not, maybe you removed it by mistake during Windows partitioning

Cinema Display plus Mac Book Air Gen2 lagging in windows 7 with boot camp !

Dear All,
I have the Apple Cinema display 27 inch.
Along with it I get the Mac Book Air 13 inch gen 2,with 2 go of memory and the integrated NVIDIA 320M (driver version: 8.17.12.5746) running on boot camp 3.2.
The issue happened when I connect it to the the 27 Cinema display, things are getting slow, and my system is kind of lagging. Itunes music crackle and opening and surning on the web is not smooth.
Do youk now how I could fix this issue which is very disturbing for such expensivesystem.
Many Thanks !

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

Cannot connect to Wi-Fi under Windows 7 in Boot Camp

I installed Windows 6 x64 the other day, installed fine, installed the Boot Camp software off my Mac OS X Install disc just fine. Everything works except that I cannot connect to my home Wi-Fi network, it says that information could not be gathered from this access point or something to that effect (in OS X at the moment, can't remember the exact message). But, if I turn on Wi-Fi tethering on my phone, I can connect to that just fine.
Any ideas?

Wrong section, oops

Cinema Display plus Mac Book Air Gen2 lagging in windows 7 with boot camp !, Cinema Display plus Mac Book Air Gen2 lagging in windows 7 with boot camp !

Dear All,
I have the Apple Cinema display 27 inch.
Along with it I get the Mac Book Air 13 inch gen 2,with 2 go of memory and the integrated NVIDIA 320M (driver version: 8.17.12.5746) running on boot camp 3.2.
The issue happened when I connect it to the the 27 Cinema display, things are getting slow, and my system is kind of lagging. Itunes music crackle and opening and surning on the web is not smooth.
Do youk now how I could fix this issue which is very disturbing for such expensivesystem.
Many Thanks !

You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

Macbook Pro core 2 duo 2.4ghz processor only recognized as 2.39ghz under Windows 7 in boot camp...

is this just a misread or a bad processor? I only noticed when I began checking for compatibility with a new PC game coming out, but now it has me curious, and I only bought the machine a couple months ago (my first Mac so please forgive me the noob question,) so if it's a 'bad' processor I'd like to see about fixing it.

Normal behavior from my experience. Windows 7 reads my 2.4GHz machine the same way (2.39GHz).

Can I install Windows 7 with boot camp on my computer, but install all my PC games for it on an external hardrive?

I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, would USB 3.0 be ok, or would thunderbolt be a better option (hoping its USB)
Thank you

you will be fine and either are more than enough for even an SSD.
NTFS of course.
Might look thru Google to see if anyone has managed to boot Windows from Thunderbolt, I think someone managed after install and then made a restore image and placed on Tb storage device.

Can I install Windows 7 with boot camp, but install all my PC games for it on an external hardrive?

I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, which would allow for a faster gameplay, USB 3.0 or Thunderbolt? as fast gameplay is important
Thank you

How to move steam to another drive:
Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
Move the steam folder over to the secondary drive you want it on
Open the "steam.exe" and it will reconfigure steam
Log in and BAM! All your games are recognized
Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
Run Steam Mover and have it move the game to that location and you are done!
Now go play the games you want!
How to have steam on the SSD while having the games on either the SSD or HDD:
Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
Have the "steam.exe" to a folder made on the C:\ drive (C:\Users\Sean\Steam)
Have the "steamapps" folder on the HDD you want to store your games (D:\User\Program Files\Steam\steamapps)
Make a junction from the "steamapps" folder to the SSD folder with the "steam.exe" in it
Open the "steam.exe" and it will reconfigure steam
Logged in and BAM! All your games are recognized and steam is on the SSD and the games on the other drive.
Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
Run Steam Mover and have it move the game to that location and you are done!
Now go play the games you want!

How do i start using Sharepoint under Windows 8.1 on Surface RT?

How do i start using Sharepoint under Windows 8.1 on Surface RT?

On the Surface, open Internet Explorer, navigate to your SharePoint O365 or corporate SP url, login and then browse your sites.
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

Blank screen when installing Windows 7 with Boot Camp - Mac Mini 2011

I'm new to the Mac scene, having barely any knowledge on the OS.
I've been trying to install Windows 7 via Boot Camp on my new Mac Mini (Latest offering from Apple).
I have an External DVD Drive which I have been using, connected via two USB's to the back of the Mac Mini itself. It's fully functioning, with the Mac recognizing the Drive. I've used it for some CD's and DVD's so far.
I have a full, licensed copy of Windows 7 Home Premium, bought from the Microsoft Store on a DVD. There's both a 64bit and 32bit DVD, of which I have tried both to install Windows 7.
I've been through the Boot Camp Assistant software, un ticking both the "Create a Windows 7 install disk" and "Download the latest Windows support software from Apple" because I already have the Windows 7 install disk. I've had troubles downloading the Windows support software from Apple, as it just stops about 1/4 of the download for no apparent reason.
So once I've made the partition, I insert the Windows 7 DVD into the External Disk Drive, and it reboots. At first it looks like the Disk Drive is working, as you can hear the Disk movement and a blue light on the front of the Disk Drive... But then the screen goes blank, and the Disk stops spinning (from what I can tell). Nothing else happens from then on.
Is there any reason as to why this is happening?
Thanks, Dominic

Yes. Booting from a USB-DVD to install Windows
The MacBook Air has extra drivers. Some people have edited the script preference plist to add their model Not all USB DVD devices may or may not work.
Burning electronic versions like an ISO or in .exe format you will see threads where that is the issue.

I removed my Windows 7 in boot camp...then i restart the imac the mac HD is gone only recovery hd left...what do I need to do to recover the mac hd?

I removed my Windows 7 in boot camp...then i restart the imac the mac HD is gone only recovery hd left...what do I need to do to recover the mac hd?

Hi I just got out of this situation after two weeks of forums and have tried any kind of different solutions.
If you have no response using start-up keys and you can't choose your start-up disk when pressing "Option" here is what to do.
The problem in this situation is common to users that install Boot Camp and at one stage the installation fail, may be a bug in BootCamp or just our mistakes, it doesn't really matter here is the solution.....
If you can start Windows, or Start the installation dvd of Windows do it, when In windows you will need to install BootCamp windows Driver, if you try to use the Apple downloaded file, it will not work.
You need to find the zip file in internet I found it with Google.
When you have the file run a "cmd" window with Administrator privileges.
Navigate in the folder that you have decompressed and open the folder Drivers/Apple/ you will see the file BootCamp.msi or BootCamp64.msi, of course choose the one that correspond to your Windows System .... type the file name and hit enter .... the drivers will install .... but what we really want to be install is that little icon on the system tray (right bottom).
After we will restart windows that little icon will give you the chance to restart the computer in OS X.
If something during the BootCamp and Windows installation had corrupted your OS X installation, you will have to reinstall, but at least you will be able to do it now. ;-) It took me two weeks and lot of researches, it's an hour job. Have fun.

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Mac Notebook - Install Windows 7 with Boot Camp

The DVD drive is broken so I am not able to install Windows 7 using boot camp. I created a few bootable Windows 7 USB drives and while the Mac is reading the drive, when I attempt have boot camp use this flash drive to install Windows 7, it keeps giving me an error that the Windows 7 CD is not in the DVD drive. It's looking for the Windows 7 installation CD in the DVD drive.
How do I get around this? I think I created the bootable USB drvie with Windows 7 correctly but it's still not working. Are there other workarounds I can do such as download the ISO file to the Mac's desktop and use boot camp to install Windows?
Thanks.

You didn't mention which OS X version you have. Not every Mac or every version of OS X or every version of Boot Camp supports installing every version of Windows from an ISO image.
Boot Camp 5.1: Frequently asked questions - Apple Support
Depending upon the age and parts availability of your Mac, it might be less expensive to have it repaired, or to purchase an external DVD drive. No guarantee that Boot Camp will 'see' the external DVD, with the internal DVD still connected, however.
If Boot Camp on your Mac does not support an ISO image, and your Mac DOES support the minimum requirements to run a recent version of Parallels (7 or newer), Parallels is capable of installing a Windows virtual machine from a Windows ISO image. Windows performance under Boot Camp is likely much better than Windows running as a virtual machine under Parallels and OS X. The most recent version of Parallels is always available for a short-duration free trial: http://www.parallels.com You still need a valid Windows license to complete even a trial installation. Older versions of Parallels (prior to version 9) will not run under OS X 10.10 Yosemite. Parallels needs to be set to look for the correct ISO image location, rather than a DVD.

Mac auto start once shutdown under windows mode in boot camp

Similar Messages

Maybe you are looking for