Mac Book Does Not See XP as Option On Startup with 'Option' Key

After successful install of XP Pro, my Mac Book only shows the Mac HD on startup when I hold down the 'Option' key. Per instructions, this procedure is suppose to show both the Mac & Windows HDs and allow a choice at startup. Ant ideas how to fix?

Hatter:
I now have a premise for this problem. I used an XP install disc that I received with a Compaq laptop that I purchased last year. HP/Compaq often write their own information to the boot section upon install of the operating system. If this happened when I installed XP from the Compaq disc then this HP/Compaq boot information may be interfering with the XP boot being seen at startup when the option key is pressed.
To prove this premise I need to know if you installed XP from a disc provide by an OEM under their brand such as HP. If so then we can conclude that the premise stated above is correct and that the solution would be to install a clean version of XP from MS.
Can you help?

Similar Messages

  • I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro.  The mac book does not have 3.5mm  jacks.  Does anyone know if a jack to USB converter would work?

    I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro.  The mac book does not have 3.5mm  jacks.  Does anyone know if a jack to USB converter would work?

    Is there a pattern to the time of day or other detail that may be
    traced back to a OS X system cause of this odd phenomenon?
    Are there any copies of system files on any of the attached USB
    external drives? Any libraries, such as iTunes, iPhoto, etc?
    Once the drives are indexed by Spotlight, are their permissions
    ignored by the OS X? Content, if neutral, should not affect the
    wake or sleep cycle; especially if they're ignored by the OS X.
    Could there be a bad cable or other component? If so that would
    be a difficult process of elimination to detect it. Usually replacing
    most suspect components in the USB stream (external to Macs)
    is a rote way to mechanically test that idea; & not 100% sure.
    Does the equipment all have a good ground to the utility or house
    electrical field? An intermittent ground may affect more than sleep.
    Hard to say at this point. Maybe a late-night talk radio guru on
    remote viewing could peer into your situation and sleuth it out?
    Sorry to have run out of ideas, but the process must be electrical
    & mechanical to some extent. - Or perhaps odd software inspired.
    Do you have any phone-home spyware items inside, just jumping
    at the chance to spill your information? Little Snitch may help.
    PS: Perhaps the computer needs to go into Apple & have a genius
    or product specialist at AASP test the unit thoroughly... BlueTooth?
    see:
    https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
    Good luck & happy computing!
    edited 2x

  • My new mac mini does not see usb drives, but in hardware info the usb is visible

    my new mac mini does not see usb drives, but in hardware info the usb is visible
    i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
    what is wrong and doe anyone has a solution ?

    It does not show up in disk utility, its only visible through systeminformation.
    When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
    To remove it I shut down the computer because I cannot eject the USB device anywhere.
    After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
    By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
    I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

  • Mac book does not discover itouch in bluetooth

    My Macbook does not "discover" my Itouch when I sync with Bluetooth.  Both units are up to date and "discoverable."
    Thanks in advamce.
    JT

    The iPod does not contain the BT profiles necessary to pair with a computer.  The iPod can pair with headphones, speakers, keyboards (newer iPods), and some other iDevices via apps for some file transfer but mainly for game playing.  See the following:
    iPhone, iPad, iPod touch: Supported Bluetooth profiles

  • Macbook Pro does not see Fast Ethernet but works fine with Gigabit Ethernet

    Hi to everybody,
      It is some time I have a problem connecting my unibody Macbook Pro (late 2008) to the ethernet cables in my office. There are 16 wall jacks in the lab, of which 13 are Fast Ethernet (100 Mbit/s) and 3 are Gigabit Ethernet. No matter what I do, if I connect to the 100 Mbit/s jacks, my Macbook does not see the connection and keeps saying "Cable unplugged". If I switch to a Gigabit jack, then a connection is quickly established.
    I have spent one whole afternoon debugging. Here is what I did:
    My computer dual boots Mac OS X and Linux. No matter which operating system I use, the problem is the same.
    Using different Cat.5 cables does not change the situation (I tried three of them.)
    All the 13 Fast Ethernet jacks do not work.
    All the 3 Gigabit jacks work smoothly.
    What puzzles me is that my computer happly uses the newest technology (Gigabit ethernet) but has problems with the oldest one. Has somebody else experienced the same problem?

    After a lot of struggle, I discovered that other people had this very issue as well. It seems that the cause is a faulty Realtek chip used in the ethernet cards of some MacBooks and other brands. There is apparently no way to fix this: I solved my problems by buying a Gigabit Ethernet switch which I connected to the Fast Ethernet wall jack. (Another option might be to use a Ethernet-to-USB adapter - but I did not try this as I have no adapter of this kind.)

  • HT1338 White Mac book will not start up just shows gray screen with apple logo

    White Mac book will not boot up gray screen only

    There are some recovery steps for this condition outlined in the below article.
    Mac OS X: Gray screen appears during startup

  • I have forgotten my password to get into my mac bokok pro. I have used my iPad to reset the password but my Mac book does not recognise the reset password.

    I have reset my password using my iPad. Why does my Mac book not recognise it to allow me to log in to it?

    What password did you change and what password is your Mac requesting.
    Without details all you will get is guesses.

  • HT201322 when I follow these directions "5. Choose a content type by clicking Music, Movies, TV shows, Apps, or Books from the top."  "Books" does not appear as an option for me.

    Trying to manage hidden Apps, Books, etc in the iCloud - I am following the directions from this post "
    HT201322: iTunes Store: Hiding and unhiding purchases"
    I do not see the "Books" option to select to manage the content, I only see Music, Movies, TV Shows and Apps
    How to I select "Books"?

    Hello eaglesrest13
    If you are having issues with connecting to the iTunes Store and certain parts of it, then check out the articles below to resolve it.
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • My Mac Book Does not shut down

    I got a top of the line MacBook in March 2011, paid some $3000. It has had a problem from the beginning and unfortunately the dealer convinced me at the time it was a random happening so i did not return it immediately. But it is really intolerable.
    When i try to turn it off, if i have used any programs, it goes to the blue screen but then the circle thing can be going forever and it never completely turns off and it heats up, even if i have quit all programs and nothing but the finder is running. I have to force shut off by pressing five buttons at the same time, including on/off button. It is irritating. At first i thought it was just an inconvenience at shut down, but increasingly the fan is working full time and so loudly all the time and when it does this i know it will not shut down. Shutting applications does not fix it. I have to turn it off, and go through the routine of forcing shut down. When using several applications i think it is slow for a macbook and apps go into loops of non-responding. For a mac with 8GB of memory, an i7 processor, it is not good enough. I am increasingly thinking that all the problems are linked. After 15 months of denial i have had enough of it.
    I have used macs since the 1990s and i am more than fed up with the number of lemons i have had from Apple. I just did not want to believe that this is another one. Just not good enough. SInce 2011 i have bought 8 ipods for presents, an ipad and this macbook. Lemons made me go away from macs but i came back.
    Anyone having similar problems?

    Just as an experiment, try resetting the SMC (http://support.apple.com/kb/HT3964).
    If that doesn't work, maybe someone else can come up with something. Did you buy AppleCare? I would have insisted on a fix during the first year of warranty, but if you bought AppleCare, you can always make an appointment at a Genius Bar and take it in (even if you don't have AppleCare, take it in - they won't charge you to diagnose the problem - just to fix it).
    Clinton

  • I just purchased Lightroom, and it arrived today, but on  a CD.  My new Apple Mac Book does not have a CD player.  What do I do?

    How do I install Lightroom on my new Apple MacBood that does not have a CD player?  I just purchased Lightroom, but it arrived on a CD.  HELP

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Mac Book does not Start

    Plug is constantly blinking and Computer does Not statt.

    Perform a SMC Reset, it covers blinking and indicator issues
    read the "not booting" Hardware section and give it your best shot, if it doesn't work, take it in.
    https://discussions.apple.com/docs/DOC-3046

  • I am having trouble getting access to fonts on hard drive. In particular Helvetica Neue Black.  It seems that since HelveNeu.dfont is a system font Font Book  does not give me the option to activate HelveticaNeuBlack.

    We recently started using Font Book instead of Suitcase Fusion for our font management program.  We are unable to activate our postscript type 1 font (Helvetica Neue Black)  It seems since hel neu is a system dfont that Font Book thinks we already have it activated but HelvNeueBlack is not part of dfont.  So even though I have it in my fonts folder the font is grayed out and am unable to activate.  I might add that HelveBlack is also a problem.  I've read the article by Kurt Lang on Font Management.  I followed his directions on how to remove dfonts from system but caused more problems than it solved.  I would appreciate a certified way to handle these particular fonts.  Do I need to purchase the Open Type fonts to solve problem.

    What I did to fix was remove Helv Fractions that cleared up the problem.
    It's been quite a while since I've seen that one come up. When you mentioned that some of the type looked like jumbled fractions, that should have jogged my memory. Yes, Helvetica Fractions is long known to be a bad font. Delete it from the hard drive and never reinstall it.
    The HelvNeuBlack and HelvBlack fonts you sent are indeed creating conflicts. Here are screen shots of their internal names. HelvBlack first, and HelvNeuBlack second.
    In Helvetica Black, the menu name is just Helvetica, which leaves nowhere for the regular Helvetica font to display in your font lists. It also then creates a cross reference between the two fonts. It is also reporting two other different names to the OS for the same font. Helvetica Black, and Helvetica-Black. You can technically get away with doing that, but it's bad practice.
    Helvetica Neue Black is the same type of bad naming. The menu name is just Helvetica Neue, which leaves nowhere for the real Helvetica Neue to go in your menu lists. Then they rather oddly threw in Helvetica 95 Black for the full name, as opposed to HelveticaNeue-Black for the other two spots.
    Just some really sloppy work here by someone for what I would guess were Type 1 PostScript fonts converted to Mac legacy TrueType. If you don't have the software to fix the names, the only good suggestion is to throw these fonts out and purchase new ones from a vendor who builds fonts correctly. And while they're kind of pricey, that means either Adobe or Linotype.

  • Cannot upgrade from V1.5.2 - Mac OS does not see the installation

    I have a purchased copy of Ap 1.5.2 and i want to upgrade to 1.5.6. Intel MacBook Mac OS 1.4.8
    I get an error message when i try to open the .mpkg that i downloaded
    Aperture 1.0 or later is required to use this upgrade
    Ap is installed in a sub-dir of Appliations, but even when i move it back there it is not found.
    2nd irritating thing is that Software Updates says that i have nothing to upgrade, when Version Tracker finds 20 odd things to upgrade.
    Is there something i can tweak to have Aperture recognized correctly?

    This happened to me to. Nothing was moved around. All previous updates worked fine. I was updating from 1.5.5 to 1.5.6. Got the same message. Restarted, tried again. Same thing.
    But, I then went and checked the Aperture version number and it was at 1.5.6! I have no idea what happened but Aperture at least thinks it is 1.5.6 now.
    Anyone else have this problem and/or its mysterious resolution?

  • Mac mini does not see files on external hard drive

    Just got a new Mac Mini and this is my first Mac.  How do I get files from my HD to my new mac mini?  I backed up the files from my old laptop but when I plug it into my Mac, I don't have any picture or music files.

    I had the same problem but only after I upgraded to Lion. I could see the files on my external drive on other Macs using older software. It seems that Lion wasn't seeing old files on the external drive. So we accessed the files on a Mac using Snow Leopard, copied all the files into one new folder on the same external hard drive and now they're there on Lion. Problem solved! I hope this helps

  • I have old CS5 disc, but my new mac book does not have disc drive and cannot figure out how to  download it from adobe. they give several choices of cs5 but I do not know which one to choose. Even when I do choose one, it does not take me to a download bu

    I have a CS5 disc but cannot find out which one is mine in the long list of choices. When I click on one, it doesn't go to a place to enter
    serial # or a download button

    Ohrita you can download the installation files for Creative Suite 5 at Download CS5 products.  You can verify the software license you purchased by checking your account at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Maybe you are looking for

  • ATI HD5770 and 2008 Mac Pro - Only DVI Port works

    I went through 4 ATI Radeon HD 2600 video cards since 2008. Enough is enough.  I bought a ATI HD5770 and i hope this is the end of it.  However, I have two monitors and I am unable to use the second monitor. The main monitor is hooked into the DVIPor

  • Problem in saving project frm labview 8.5 to 8.2

    i m facing problem while saving the project frm 8.5 to 8.2 while doing this i recieve message of following Vis missing 1 Teststand-ExecuteMenu Command.vi 2.Teststand-Insert Command in Menu(Execution View Manager.Vi 3.Teststand-Insertcommand in Menu (

  • DataGrid column width is not set properly

    Hi,         In the below example I has called the OptimizeDataGrid method on Button Click event to resize the Column according to the data. First time of the button click event it called the function whereas the Datagrid Column width alone is not set

  • Downgrading from Snow Leopard to Leopard: Best Practices?

    Hey everyone. Snow Leopard isn't working out for me (slowness, crashing, etc.), so I plan on downgrading back to Leopard for the foreseeable future via a clean install. I utilize Time Machine with an external hard drive, within contains all of my fil

  • Ipod Seems to be corrupt

    I have restored my ipod numerous times, recharged it in an outlet, restarted my computer, updated my itunes to 7.0.2 twice, and restarted my ipod, and the computer says my ipod seems to be corrupted and I don't know what to do because ive tried every