Mac Book doesn't print when connected to a shared printer.

I am hosting a shared printer in our office and no other computer but mine can print from it. Mine is the only one connected to it via USB. All of the computers are Mac laptops. I've enabled printer sharing and checked to see how the others were configured but can't figure out what's wrong.
When printing from the other computers, I get a message in the progress bar saying "(On Hold) Authentication Required." I've tried pressing Resume and re-entering the username/password, but it goes back to that message...
The printer is a Brother 2140.

https://discussions.apple.com/message/19078051

Similar Messages

My mac book pro gets stuck when connected to internet

hello.
I recently changed ISP and router...
I noticed that when I connect to the wifi of my house my mac book pro gets stuck. the color spinning wheel (of death) starts and shows forever and I can't click anything after that. I can turn off the mac only by forcing quitting (holding down the power button).
i checked the hard disc at disc utility and everything is ok
when i restart and turn the air port off it doesn't get stuck...
Please help!

I recently changed ISP and router...
Do you have an apple router at all??
If so which one?
when i restart and turn the air port off it doesn't get stuck...
So you are plugged into the main router by ethernet??
Are you actually running Lion??
If not what are you running? And if it is that all round Stinker Yosemite.. no surprises there.
As far as the computer is concerned clear out all the old wireless names.. shut down the computer.. restart the computer and rediscover the wireless again and put in the password. Does that help??
Old laptop and upgrade install bad news all round.

The 2012 MAC book doesn't boot

the 2012 MAC book doesn't boot, grey screen with the apple in the middle and the progress bar when it reaches the end it shuts off

Try SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

HT1661 How can I restart my mac book pro 11 inches when it's on target disc mode

How can I restart my mac book pro 11 inches when it's on target disc mode

Even if you could open Disk Utility you can't reformat a disk while you are booted from it. You will have to use the install CD. Ring the Apple Online Store at the number given at bottom left of this page and give them the serial number of your Mac. You should be able to get the Snow Leopard install disks for a nominal fee.

I purchased a mac book air today. When in store I was able to see all of my music in itunes. Now I am at home I cant see any of my music although i tunes is authorized on the computer. How do I fix this ?

I purchased a mac book air today. When in store I was able to see all of my music in itunes. Now I am at home I cant see any of my music although i tunes is authorized on the computer. How do I fix this ?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

What does that have to do with Digital Publishing Suite?
We’d love to help but if does have something to do with it, please give us
some details.

I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air. I can connect to samsung soundbar with my mac but the connection drops immediately. Please help MacBook Air, iOS 10.9.4

I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
I can connect to samsung soundbar with my mac but the connection drops immediately. Please help.
MacBook Air, iOS 10.9.4

Contact Samsung for help.
Barry

I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

If there isn't a Page Setup in the Print Dialog, open Text Edit>Edit>Page Setup, check borders there or use Custom Page setup & save.

HT2074 i will want sync contact in mac book air with blackberry when sync started in contact i see massage in contact you must turn on sync service but i don now ?

will want sync contact in mac book air with blackberry when sync started in contact i see massage in contact you must turn on sync service but i don now ?
who can i sync a contcats white mac book to blackberry ?

Blackberry must update their software to work with Mavericks.

MAC couldn't complete the printing task through the windows sharing printer.

Brief:
A printer HP OfficeJet 5608 conneted with one Windows XP computer via USB. And sharing on LAN.
My MAC, MacBook Air (10.7.4)，can install this shared printer, with it's integrated driver. Everything shows okay.
I can send the printing task to this printer, and the printer do seems responding, but the printing job just can't come out.
The windows has received the printing job, it alawys shows printing, but just can't finish it.
What could this problem be? Please help, Thank you!
Root

Hi Kmanxx,
The update failure might be caused by a variety of reasons such as connection issues, incomplete Components and firewall. For troubleshooting, specific error code of the failure update will be helpful.
You also could find installation failure events and error code in log files, such as WindowsUpdate.log (C:\Windows\ WindowsUpdate.log) and CBS.log(C:\windows\logs\cbs\cbs.log). Here you first want to search for “error” in your logs. This will search for
Error entries. Focus on the day the installation attempt occurred. Refer to your time line of update log, find what error happened. Of course you could post your log content and we’d like to give it a look.
How to collect the specific error code of failure update:
We can do this by viewing your update history.
1. Swipe in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), and tap or click Settings.
2. Tap or click Change PC settings, and then Update and recovery.
3. Tap or click View your update history.
View failed update error code.
For your reference:
Unable to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2(also applies to Windows8.1):
http://support.microsoft.com/kb/2509997/en-us
If all updates fail to install on a particular client or if for example you cannot install a Service Pack:
http://blogs.technet.com/b/roplatforms/archive/2011/04/28/installation-failures-cbs-store-corruptions-uncommon-issues-and-troubleshooting.aspx
Fix Windows corruption errors by using the DISM or System Update Readiness tool:
https://support.microsoft.com/kb/947821?wa=wsignin1.0
Regards

HT1150 I have two shared printers and I want to be able to select the printer when it is time to print without having to set a default EACH time. Can I just have a prompt to ask me which printer to use???

I have two shared printers and I want to be able to select one printer when it is time to print without having to set a default EACH time. Can I just have a prompt or dialog box that will ask me which printer would you like to use??? The only options I can find are "default" and "Last printer used" which means I must go into the Print & Fax area and change the default EACH time I want to print??? Seems very low tech.....

junnybug wrote:
Can I just have a prompt or dialog box that will ask me which printer would you like to use???
In most cases you get this dialog box every time you print. It is called the print dialog and normally when you print, a print dialog appear showing the printer that is to be used. Which printer you see will be based on what you have set in Print & Fax as you mention. But regardless of what you have set there, you still have the option to change the printer via the print dialog.
If you are using an application that does not show the print dialog, like MS Word and that stupid "print one copy" print icon in the toolbar, then you can often change the action the print icon uses so that the print dialog appears.

I've updated my iPhone 6 with iOS 8.3 after that i have lost all iCloud shared albums on phone but i sill have those albums on mac book and on phones of people i had shared with

I've updated my iPhone 6 with iOS 8.3 after that i have lost all iCloud shared albums on phone but i sill have those albums on mac book and on phones of people i had shared with

You need to update iTunes to 11.1 on your PC

Printing from Linux to Windows shared printer

I am trying to print from Linux to a shared printer on a Windows XP PC. I installed cups and foomatic, started cupsd and configured the printer (HP Deskjet 720C) in KDE control centre. When I try to print a test page I get the following message:
Catastrophe! - KNotify
A print error occurred. Error message received from system:
cupsdoprint -P 'deskjet' -J 'KDE Print Test' -H 'localhost:631' -U 'root' -o ' multiple-document-handling=separate-documents-uncollated-copies orientation-requested=3' '/opt/kde/share/apps/kdeprint/testprint.ps' : execution failed with message:
client-error-not-possible
I have Googled like crazy but couldn't find a working solution.
For reference:
/etc/cups/printers.conf
# Printer configuration file for CUPS v1.1.23
# Written by cupsd on Wed 29 Jun 2005 09:33:20 PM BST
<DefaultPrinter deskjet>
Info HP DeskJet 720C
Location
DeviceURI smb://guest@MSHOME/ANDROMEDA/HPDeskJet
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
AllowUser root shaurz
</Printer>
/etc/cups/cupsd.conf (comments stripped)
LogLevel info
Port 631
<Location />
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>
<Location /admin>
AuthType Basic
AuthClass System
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>
lpstat -t
scheduler is running
system default destination: deskjet
device for deskjet: smb://MSHOME/ANDROMEDA/HPDeskJet
deskjet accepting requests since Jan 01 00:00
printer deskjet is idle. enabled since Jan 01 00:0

Rather than use SMB to connect from Lion to the Windows XP printer share, a better method is to enable Print Services for UNIX on Windows XP and then use LPD on the Mac to print via the Windows share.
To install Print Services for UNIX on Windows XP:
Log on to the Windows server with an administrative-level account.
Start the Add/Remove Programs tool in Control Panel.
Click Add/Remove Windows Components.
Click Other Network File and Print Services, and then click Details.
Click to select the Print Services for UNIX check box, and then click OK.
Follow the instructions on the screen to finish the installation
If you haven't done so already, share the printer on Windows XP and make the name one word - no spaces or special characters
With the print services enabled you can then create the printer queue on Lion.
Open Print & Scan and click + to add a printer
Select the IP icon and set the protocol to Line Printer Daemon - LPD
For the Address, enter the IP address of the Windows XP computer
For the Queue name, enter the share name set for the printer in Windows XP
Name and Location are free text so you can set this to something meaningful
For the Print Using menu, select the supporting printer driver. Note that like connections via SMB, the vendors driver for Lion in some cases cannot be used and an alternate like those offered by the Gutenprint suite must be used.
Click the OK button to complete the queue creation.
Now you are ready to test the new print queue.

Mac Book doesn't print when connected to a shared printer.

Similar Messages

Maybe you are looking for