Mac Book HDD question

I actually have 2 questions for my macbook. I have a late 2008 aluminum body 13 inch macbook 2ghz intel core 2 duo with snow leapord . 1st question the 128gb hdd is almost full i have about 29 gb left. I want to upgrade to an internal hdd can this be done? And any recommendations would be awesome with a link to the HDD.
also the same laptop is crashing. I dont know what seem to be causing it. Itll randomly just crash and it takes for ever to reboot. the battery is fully charged.
thanks

TM will backup everything you do not specifically exclude.
You might try reinstalling OS X. See the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Similar Messages

  • Mac book HDD can't Activate

    Hi everybody,
    I have a mac book. It can't start when i start it make sound of beep and then no action. So i start it with installation DVD but when i go to chek disk with disk utility i found that my HDD is not activate so i click on the icon for activate but after some minutes occurs a message that go to S.O.S. and check verify disk so i do this and in the verify process it show error that disk can't verrify and can't repair.
    Please help me to risolve this.
    Is the HDD dammeged or there is a way to risolve this.
    Thanks
    Ram

    Hello edom!
    Welcome to Apple Discussions.
    What is the error that you receive in Disk Utility? Invalid node structure?
    It doesn't sound like the HDD is damaged, but rather it sounds like the drive may have failed (or is failing).

  • 'LOGIC' d.a.w program/mac book pro question

    Is it possible to buy 'LOGIC' d.a.w program with a mac book pro, and if so, how is this accomplished?

    Yep, once you boot up your machine and set up your Apple ID, just go directly to the App Store (under the Apple menu), search for "logic pro" and click on the price and then "Buy". It will be automatically downloaded and installed.
    Just gotta love the App Store...
    Good luck with your new machine and Logic Pro!
    Clinton

  • Mac Book (2009) Question Mark Folder ... Help!!

    Hello, I have a mid 2009 Macbook, and i bought it off e-bay i while ago. My school happens to give these computers to students so that they can take them home and they also give these computers away on ebay when a class leaves  and i bought it from them . The computer worked fine the first day that i got it, But then the next day the question mark with the folder popped up. I had never seen this before, and i have seen on here the resolutions to fix the computer, but how can i fix it if it wont restart or start up? i have no documents on the computer because i just got it so i dont care about losing any information on the computer. There is a Certain disk that I've heard about the Mac os x, should i purchase that? and if that dosent work, do i go to the mac store and get it fixed? and if i do get it fixed how much would it cost? Please Help Me!!!
    P.S. The computer screen stays on the blinking folder with the question mark and then shuts off after 10 mins, i know its prob. the hard drive cause its an old computer but how do i fix this
    Thanks
    -Erika

    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion or 10.8 Mountain Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • Mac Book HDD Full, Won't Login

    I have a 13" Macbook (black) with a 150GB HDD. I have been copying movie files to the computer and disregarded a message saying "the hard drive is full". The hard drive filled up and the computer froze (after the above message). The computer will boot to the login window, but will not allow a login - the screen changes to a blue screen for a time and then returns to a login screen.
    I'd like to find a way to access the HDD and remove some of the files. I have a desktop Mac as well.
    Thanks,
    kayjh

    Yes, the trash was emptied and Finder showed the drive with 17GB.
    In the end, we did an Archive and Install to cure the problem. I checked the Apple support knowledge database which had an entry for the exact same symptoms, but on a 2007 iMac (20" and 24"). The advice was to Archive and Install.
    Of course you need to have enough HDD space to install a new operating system image, but I guess 17GB was enough. My nephew comlained that he got an iTunes error saying that the music had been created with a later version of iTunes. I expect that connecting to the internet and doing a software update should resolve that problem.
    Thanks for the replies.
    kayjh

  • Mac Book Battery Question

    If I have my charger plugged into my macbook pro 2011, but it is not plugged in to the wall(so it is not charging), will this make the batter of my mac drain faster?

    rmarcott04 wrote:
    Sorry, I am actually curious to the science behind this.......line loss
    Been 15 years or more since I heard someone mention line loss.
    In a lithium battery, deep discharges alter the chemistry of the anode to take up lithium ions and slowly damages the batteries capacity for the cathode to transport lithium ions to the anode when charging, thereby reducing max charge levels in mAh. In short, radical swings of power to lithium cells disrupts the chemical ecosystem of the battery to hold charges correctly which likewise impedes the perfect transfer of lithium ions both in charging and discharging.  In charging your lithium battery, lithium ions are “pushed uphill” (hard) to the anode, and discharged “downhill” (easy) to the cathode when on battery power. Deep discharges, damages this “upward” electrolyte chemistry for the battery to maintain a healthy charge and discharge balance relative to its age and cycles.
    From BASF: How Lithium Batteries work
    https://www.youtube.com/watch?v=2PjyJhe7Q1g
    Proper understanding of a battery charge cycle
    A charge cycle means using all of the battery’s power, whether that is at once, or over several shorter battery discharges and recharges.
    Two examples for clarification:
    As a first example, where one fully charged battery is discharged down to 10%, then fully recharged, then using 10% of that full charge, this counts as 1 cycle since the total of both discharges is 100% of a full charge of use.
    In the second example, where one fully charged battery is discharged down to 40%, then fully recharged, then using 40% of that full charge, this also counts as 1 cycle since the total of both discharges is 100% of a full charge of use.
    While both examples are that of a single charge cycle, the first example is more aggressive against the lithium battery chemistry than is the second example. In short, collective overall gentle shallow or mid-range draining of your lithium battery is a better use condition than is the first example of deep-draining of the battery.  While both are quantitatively identical as a single charging cycle, they are wholly different qualitatively on the battery chemistry, which is directly related to its ultimate longevity and health.
    In short, it is the near and mid-term life of the battery as relates to its proper care (or lack thereof) that is to be looked after.
    Priorities in order of decreasing importance for battery care are:
    1. Avoiding deep discharges of the battery.
    2. Avoiding having your battery constantly on charge or on charge and in sleep mode.
    3. When playing graphics intense games, use your notebook plugged in when possible.
    4. Reduction of battery cycles by plugging into power when on the go, or when accessible.
    A person who has, for example, 300 charge cycles on their battery and is recharging at say 40% remaining of a 100% charge has a better battery condition state than, say, another person who has 300 charge cycles on their battery and is recharging at say 10-15% remaining on a 100% charge. DoD (depth of discharge) is vitally important on the wear and tear on your Macbook’s battery, much more so than is the counting of charge cycles. There is no set “mile” or wear from a charge cycle in specific. Frequent high depth of discharge rates (draining the battery very low) on a Lithium battery will greatly hasten the lowering of maximum battery capacity.
    Understand that a charge cycle is a general parameter of use, but is not directly related to the short-term or mid-term abuse of the battery, which can rapidly hasten a shorter lifespan, regardless of what the actual cycle count on the battery indicates.
    Proper considerations for near-term care of the battery is of utmost importance. Abuse of the battery is entirely avoidable, long-term eventual old age deterioration of the battery is entirely unavoidable.
    General consideration of your MacBook battery
    Contrary to popular myths about notebook batteries, there is protection circuitry in your Macbook and therefore you cannot ‘overcharge’ your notebook when plugged in and already fully charged.
    However if you do not plan on using your notebook for several hours, turn it off (plugged in or otherwise), since you do not want your Macbook ‘both always plugged in and in sleep mode’.
    A lot of battery experts call the use of Lithium-Ion cells the "80% Rule", meaning use 80% of the full charge or so, then recharge them for longer overall life. The main quantified damage done in the use of Lithium Ion batteries are instances where the internal notebook battery is “often drained very low”, this is bad general use of your notebook battery.
    All batteries in any device are a consumable meant to be replaced eventually after much time, even under perfect use conditions.
    If the massive amount of data that exists on lithium batteries were to be condensed into a simplex, helpful, and memorable bit of information it would be:
    1. While realistically a bit impractical during normal everyday use, a lithium battery's longevity and its chemistry's health is most happy swinging back and forth between 20% and 85% charge roughly.
    2. Do not purposefully drain your battery very low (10% and less), and do not keep them charged often or always high (100%).
    3. Lithium batteries do not like the following:
    A: Deep discharges, as meaning roughly 10% or less. Avoid this in all instances if you can. This is hard on your battery.
    B: Rapid discharges as referring to energy intensive gaming on battery on a frequent basis (in which case while gaming, if possible, do same on power rather than battery).
    C: Constant inflation, as meaning always or most often on charge, and certainly not both in sleep mode and on charge always or often.
    From Apple on batteries:
    http://www.apple.com/batteries/notebooks.html
    http://support.apple.com/kb/HT1446
    "Apple does not recommend leaving your portable plugged in all the time."

  • Greetings world.I have created a dmg. of my entire iomega ext HDD via disk utility using a mac book pro. It is currently sitting on the desktop. I have erased the iomega and now I can not understand how to put the dmg back.

    It is safe to say that i need help..................
    let me start at the beginning.
    I have 1 2008 imac. always a pleasure never been a problem. Attached to it i have an iomega 500gb ext drive. also been ok.
    until now!!
    The HDD would not mount. Disk utility suggested that it was ok so i tested the imac HD. I got error code 4MOT/2/40000004: HDD- 1502. This doesnt worry me at the moment.
    I attached iomega to my Mac book pro and again it would not mount. The disk utility did tell me that the iomega needed repair. it advised that i should wipe it and restore.
    So I used the MB Pro disk utility to create a DMG. and saved it to the desk top. I then erased the iomega. did a repair and it all seemed ok. So then i try to do a restore.
    After a very long time it said internal error with the dmg. using disk utility i did a convert dmg (compressed) and saved it to the iomega. middle of the night job!!
    got up this morning and indeed it had sent the DMG to the iomega. But i could not open it. The iomega itself seemed dandy asking me if i wanted to use it as a time machine etc and it mounted ok and i saved a small jpeg to the iomega as well. I then thought that maybe when i did the convert as a compressed file i made a mistake. i'm guessing it should be a read and write so i started all over again.......... wiped iomega (which was quite quick) then tried the convert tool again.....it trys for a while then says there is not enough disk space...........I'm not sure which disk it is refering to.??
    I have purchased a 1tb hard drive today incase the iomega is some how full up.
    So really my question to the world is .........Help?

    well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
    Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
    fingers toes eyes crossed.

  • How to upgrade Sata Hdd to SSD on Mac Book Pro 13"?

    I have a Mac book Pro 13" and I want to upgrade my Harddrive to SSD. Also want to know how to do cloning, so that no data loss will be there.
    Regards
    Sid J

    what you do is first put the the SSD in an external enclosure and hook it up to your mac.  Then, open disc utility in your utilities folder.  Erase the new SSD and reformat it as Mac OS Extended (Journaled).  Then, run the cloning program and it will make a mirror image of the HDD currently inside your mac to the new SSD in the external enclosure.  Then, remove the SSD from the external enclosure and put in it your mac.  All done!  .  If you are unfamiliar with an external enclosure, they are very inexpensive..here is one I own: http://www.newegg.com/Product/Product.aspx?Item=N82E16817106115. Any further questions you my have either now or during the process, don't hesitate to ask, I have done this process a handful of times and it is very easy even for the non-techie.

  • I have a Mac Book Pro with a 320 gig hdd and my drive is corrupted and I can't engage it. So I would like to switch to a 1 terabyte drive can this be done?

    I have a Mac Book Pro with a 320hdd, 2.33 processor, 8 gigs of RAM and  OS X 10.9.4 .  My hdd crashed and I cannot access it so is it possible to install a 1 terabyte drive with the operating software already installed and also upgrade my RAM to 16 gigs?

    If I were you I'd install a small SSD as the boot drive from OWC:
    http://eshop.macsales.com/shop/SSD/OWC
    Then put a second large conventional drive either in the optical bay (Data Doubler) or in an external.
    You don't say which MBP you have: Size, CPU type.
    Also when you upgrade you could see if you can salvage your data from your old HD. Can you hear it spin up? If so Data Rescue IV.

  • Can you help me find if HDD is replaceable to a SDD on this Mac Book Pro

    Hello,
    Mac Book Pro released June 2012
    500GB serial ATA @ 5400
    4GB (2 x 2GB ) of 1600 MhzDDR3 SDRAM
    Intel HD Graphics
    1. Can user able to replace  HDD  to SDD?
    2. Is RAM upgradable to 16GB?
    Regards

    I have a similar Macbook pro..and was wondering what model SSD drive to you upgrade to? I need to change out my old HDD to an  SSD because of problems.
    Also does anyone in the community know whats the best recommended SSD drive to use for the
    Mac Book Pro 15" released June 2012
    Model 9.1
    500GB serial ATA @ 5400
    4GB (2 x 2GB ) of 1600 MhzDDR3 SDRAM
    Intel HD Graphics
    thanks clttt

  • My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

    My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
    That's why i am interested on anyone's help.

    Welcome to the Apple Support Communities
    I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
    If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

  • I have no clue as to what my security question answers are and since this is my first purchase from my mac book it is asking for these. What do i do?

    I have no clue as to what my security question answers are and since this is my first purchase from my mac book it is asking for these. What do i do?

    You won't be able to change your rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Anyone help mac book screen White with a question Mark in the middle of the screen .matthew

    Can anyone help my mac book screen has gone White with a question Mark in the middle of the screen .Matthew

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • HT201364 Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont k

    Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how.  It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !  
    Thank you !!

    Hope this helps.
    1. Empty Trash.
        http://support.apple.com/kb/PH10677
    2. Start up in Safe Mode
        http://support.apple.com/kb/PH11212
    3. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    4. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    5. Disk space / Time Machine ?/ Local Snapshots
       http://support.apple.com/kb/ht4878
    6. Re-index Macintosh HD
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409
    If this does not help, you have to buy an external HD and move your movies photos.etc to
    the external HD.

  • I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

    I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
    I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

    Ouch, well there is a problem.
    This is the stack of partitions on your old drive
    EFI (hidden)
    Lion (50GB say)
    Bootcamp (50GB say)
    Lion Recovery Partiton (hidden)
    This is the same stack on your new drive imaged from the old one.
    EFI (hidden)
    Lion (50GB say)
    Bootcamp (50GB say)
    Lion Recovery Partiton (hidden)
    Emtpy Space (100GB say)
    This is what you want
    EFI (hidden)
    Lion (100GB say)
    Bootcamp (100GB say)
    Lion Recovery Partiton (hidden)
    EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
    And you only have four partitions.
    You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
    Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
    This is what your going to need to do.
    You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
    You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
    Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
    Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
    Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
    Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
    When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
    As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

Maybe you are looking for

  • I cant open iTunes on 10.4.6. How can I upgrade?

    I have downloaded iTunes on to my Mac, but when I try to open it I get a message that says I need OS X 10.4.9 or higher. I have 10.4.6. I have tried to download the updates from the apple site, where 10.4.11 is mentioned. This took over 3 hours but w

  • New Lumia 520 won't even Start!!!!

    Hi All, My roommate just received a Nokia Lumia 520 which he ordered online a couple of days ago. The thing is, the phone won't even boot up. The Nokia logo appears, stays, disappears for a few seconds and then gets back on again.  This has been goin

  • Newbie Question...I Feel So Stupid...

    But, here it is: On my old Windows PC to arrange files, icons, etc. in alphabetical order, all I did was right click and then arrange them in order (or whatever setting I wanted). Sooo, on my iMac, how do I arrange a folder full of icons, files, etc.

  • Window position in forms 9ias

    Hi, can any one help in this problem, i am running a form 9ias in native language (Arabic) , and when i press a button that opens another window , the window appears in wrong position , while running the same form in (English) , and pressing the same

  • No sound using Bose Soundock

    Greetings, purchased Bose SoundDock yesterday. I have two ipods - a mini and a nano. The nano works well in the SoundDock, but the mini will not even though it plays fine with earphone headset. It shows that it is running and charging but no sound. I