Mac book pro 10.5.7 sleep issue..... not even sydney genius bar can help me

ok hey guys, this is my first ever post on a support forum so please help me out!
I'll give any specific hardware info if needed later on but this is the basics:
i have had my mbp for over a year and 6months into it my mbp started going into sleep mode for no reason ...and no im not simple the energy settings are set to never sleep so its not that. Since then i have tried and tested everything under the sun to resolve the issue i have been to the genius bar and booked it in several times, each time they tell me they can not find any problem. I have had the logic board replaced - i have tried removing the p.list files, resetting pram thingy the battery test thing....everything...i have looked on endless forums for a resolution but nothing works!, it will go to sleep at random times generally when im doing alot of things on it it can run fine for days maybe sometime weeks but then its starts playing up again. When it does sleep the screen goes blank and the power light pulses but worst it cuts the internet connection which is terrible coz i have a time capsule and it cuts that link as well and messes that up entirely! sometimes it will just keep cutting out every 20-40 seconds untill i wake it by tapping the space bar or moving my mouse sometimes it just shuts down completely - i have done a compete erase & reinstall but ill b honest i still reinstalled some programs from my backups that cant be downloaded anymore (isquint etc) coz the genius guys said maybe a program is corrupting the hardware but if anyone has any ANY ideas or has the same problem please! tell me - im sure i could add more info n stuff but if u want 2 ask me specifics then i will answer anything to help
thanx again guys.
i should say at this point the only relief im getting to stop it from sleeping is if i disconnect the power adapter and use the battery that seems to stop it, but it has crashed(slept) on battery power as well but as of today doing this seems to help ....hasn't crashed since writting this! LOL

Has anyone got any assumptions on suspect software that may cause my problem??
I see that louie has a possible response for you. I had forgotten about that problem.
lastfm, transmission or handbrake. Can anyone confim issues after installing these apps?
if not these softwares then im convinced im dealing with a power issue.
I would be doubtful (although not completely dismissive) of anything like these being the source of your problem.
the genius bar has said it may b an enviromental issue. this also may be the case, tho not so much recently. They said perhaps magnectic fields may cause it 2 go 2 sleep and its true moving my MBP around does seem to settle it for instance if i move it out of my room im yet to see any of my sleep issues occur
The movement sensor might be involved, as also louie's excellent suggestion of the temp sensor. It is difficult to know how to test these effectively and might need more tools than the GB can muster.
But i dont live in a electricity tower and i did move my MBP to the other side of my room where it worked for a good month - and then started again with the sparatic sleeping.
It is hard to disprove a negative. The only way to bring some sort of evidence to the table if there were some such interference would be to use the computer for an extended period away from where you are using it now. If it works without problem in (say) Starbucks or some other neutral area, and then fails within a few minutes of returning to your home, then there is something stronger to work with. Then you can start to track down some external source, I would guess.
So i will try a safe start as graham had suggetsed as this seems as a simple enough fix - but i do run a time capsule, ext 1TB HD, Wireless mouse etc ..which i presume will not work in safe mode .... and is the idea to just keep safe mode on untill it does crash again or will just starting up on safe mode then restarting solve the issue?
Time Machine ought to work in Safe Mode; and I would not suggest working that way for a lengthy period of time: just to start it up perhaps to clear something that is interfering. But what you write here is of interest: (A) The HD -- what is it (brand, etc, and how formatted) and how connected; plus the wireless mouse? What brand is that (and I presume you mean Bluetooth)?
As for A weak diode..I dunno what that is or how 2 check it
Right. I couldn't either, and most shops won't: they would just replace the board. There is a shop here . . . but that is too far for you.
i think the battery is ok ..as i said it performs better at this point when i disconnect the power...but not always... i had a terrible day yesterday when it would keep going to sleep everytime i reconnected the power, if i try 2 persist it will keep going back 2 sleep ever 30 seconds untill i eaither just leave it be for a while or untill it just turns off completely!
That suggests, as I mentioned earlier, something awry with the battery/power combination; especially if the performance is not consistent. A battery should deteriorate gradually, not come and go.
If it does turn off when i turn it back on it wont even get to the grey apple logo it just keeps turning off after 2-5 seconds (turning off not sleeping)
so im at a loss why that is!
No power. You have to wait a while until the power level is brought up to a workable level.
The power cord seems fine all the pins spring out - the middle spring is smaller than the others tho.
Mine too. That seems OK.
Do post those logs. Someone might see the answer.

Similar Messages

  • I bought a mini DVI to HDMI convertor and  a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.\\\\\

    i bought a mini DVI to HDMI convertor and  a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.

    I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
    You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

  • Mac Book Pro (OS 10.4.11) WILL NOT SHUT DOWN UNLESS FORCED! HELP!!!

    My Mac Book Pro 15", 2.33 GHz, 3 GB memory - runninfg Mac OS X 10.4.11 WILL NOT SHUT DOWN UNLESS FORCED! HELP!!!
    When I use the SHUT DOWN command in the Apple Menu - programs close, the screen goes to a blue screen with a revolving time indicator and then remains that way until I FORCE SHUT DOWN by pressing the power button - then after a it makes the sound the screen goes black. I have restarted the machine several times and run disk doctor from the start up disk - no problems are recognized. The problem started last night. I upgraded to Mac OS 10.4.11 today - hoping that the update would resolve the issue - NO LUCK! I keep trying to get a successful SHUT DOWN from the apple command - However I have not been able to get it to SHUT DOWN without forcing the power button. HELP!

    "... and run disk doctor from the start up disk"
    Please explain that one. Disk Doctor was part of Norton Utilities. NU is not supported by OSX and the faster you get rid of it the better. Boot from your Installer disk and run Repair Disk from Disk Utilities. An optional way of shutting down is holding down control-option-command keys and pressing the eject button. When you are having problems address the problem. Upgrading to a new OS version will not solve the problem.
    Wht you should try is running the 10.4.11 intel combo updater here:
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions before and after.

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • HT4929 I have os x 10.6.8. When I try to update it says there are no updates for my sytstem.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    I have os x 10.6.8. When I try to update it says there are no updates for my system.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    Welcome to the Apple Community.
    You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not.

  • I have a mac book pro, 2006 with an 2.16 GHz Intel Core Duo processor, can I update to Lion? to use icloud.

    Apple keep telling me I need to update to icloud but I'm not sure if Lion will work on my Mac. I've upgraded to snow leopard which seems to have knackered my .me or .mac account (whatever it's called now), so I don't seem to have any option but to upgrade to Lion if I every want to see my emails again.
    Apple say I must have a Intel Core 2 processor for Lion to work...... at least I think that's what they say.
    I have a mac book pro, 2006 with an 2.16 GHz Intel Core Duo processor, can I update to Lion?

    Lion System Requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.
    If you have a Core Duo model then you cannot upgrade to Lion. You can upgrade to Snow Leopard, but iCloud is not available for Snow Leopard.
    Open System Profiler in the Utilities folder. Look for the Model ID in the displayed information. If you have a MacBookPro 2,1 or later then you have a Core 2 Duo model and can upgrade to Lion.

  • I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    See if exporting them helps:
    Exporting From iPhoto | Apple Support Communities
    Gene

  • I need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?  i use OS X

    i need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?

    With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
    Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
    So just go thru the motions of creating a proper printer instance:
    Make sure the Mac "sees" the printer on the network.
    System Preferences / Print & Scan
    Click on the + button on the left column
    Select the appropriate type of printer, will use IP for the rest of this
    Select HP Jetdirect - Socket, default for HP network printers
    Type the IP address or look it up
    Name the printer for easy identification on the print dialog
    Let the Mac identify the printer model or manually choose the driver
    Click Add.
    Once the instance pops up in the list, can click on Options & Supplies for further config.

  • I have a Mac book pro that is giving me the note that it is full.... Trying to back it up...... It's freezing

    I have a Mac book pro that is giving me the note that it is full.... Trying to back it up...... It's freezing

    How full is it?  Go to
     > About This Mac > More Info… > Storage
    Report the free space and the total size of the storage:  xxx GB out of xxx GB.
    Recovering Disk Space
    If you have less than 10 GB you definitely need to delete or offload some files or purchase a lager disk or SSD (see below).  You may want to maintain at least 20 GB of free space so when your disk starts filling again it will have some room before it hits that 10 GB mark again.  More headroom is better.  If you let the space fall much below 9 GB you might not be able to boot your machine.
    Initial easy steps to gain disk space:
    - Delete all files in the Downloads folder.
      Empty the Trash.
    - Start iPhoto.
      Empty its trash.
      Restart.
    - Restart in Safe Mode:
      Restart the computer.
      As soon as you hear the chime press and hold the right shift key.
      Be patient. Hold it down until you see the Apple icon.
      Empty the trash.
      Restart in normal mode.
    - Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the drop down menu.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
    - Empty the Trash.
    - Restart.
    - Re-index your system disk (Macintosh HD):
      http://support.apple.com/kb/ht2409
    Additional reference on freeing disk space:
    http://pondini.org/OSX/DiskSpace.html
    How much disk space is available now?
    Normally you should backup before proceeding to delete other files but at this point it may not be possible.  Having taken the steps above will the backup compete now?  If not, stop, post back, for emergency data protection procedures and/or how to free more disk space.

  • HT204291 if i have a mid 2009 mac book pro and an apple tv that is the latest one. i can not mirror the mac book on my tv.  is it the fact that my computer is a little older than 2011 models which will work.  any info is greatly appreciated

    f i have a mid 2009 mac book pro and an apple tv that is the latest one. i can not mirror the mac book on my tv.  is it the fact that my computer is a little older than 2011 models which will work.  any info is greatly appreciated
    chuck schick

    Yes. You need 2011 or later in order to mirror as it requires the newer processor. The alternative is airparrot, which does it via software.

  • I installed the window 7 os in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume the mac os x?

    i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

  • I have microsoft word installed on my mac book pro and everytime i open my computer it opens to, have can i make it stop? it startet when i installed  os x mountain lion on my mac.

    i have microsoft word installed on my mac book pro and everytime i open my computer it opens to, have can i make it stop?

    u should go to the apple icon on menu bar and then go to "Force Quit" and then select the application u want to quit. if u did, microsoft word won't appear again when u open. make sure that before u shut down ur mac, u need to force quit to make sure the applications u opened wil not appear when u start mac. good luck..

  • Mac Book Pro has blinking folder and will not start.

    MY Mac Book Pro mid 2010 has the blinking folder and is froze, I have entered into the Internet recovery mode and tried to reinstall OSX system.  And in the Disk Utility there is no hard drive to select.   What is the next step?  

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Mac Book Pro (4.1) Randomly Locks Up/Not Responsive to Anything

    My Mac Book Pro (OSx 10.5.5) seemingly randomly locks up after ~10ish hours of being on. This started about a week ago (purchased in late February) after nothing new being installed. I'm of course never in my office to see this happen, but what I see when I come back is a computer with a black monitor, not responsive to the keyboard at all (caps lock light won't even turn on, space doesn't "wake it up", etc), and not responsive to USB devices (iphone won't charge, external keyboard doesn't do anything). The LED on the open the lid button is in a solid dimly lit state. When I attempt to close the screen the same LED is in a solid (non-blinking) state though brighter. Again, USB peripherals have no effect on the state of the machine. When I open the screen it's exactly as described above. The only solution I've found is the power button which is incredibly frustrating since a) I lost some work and b) I lost a 3 GB download in the middle for the third time now. Help??? Thanks,
    Doovie

    Have you run Repair Disk from Disk utilities while booted from your OS installer disk? Is your MBP set to sleep if not used while on?

  • Mac book pro stuck on grey screen will not boot

    UUgh someone please help me. My lap top is a mac book pro 2006, and it is stating cannot get audit port I dunno how to fix. I'm on my iphone a we speak it has been down for weeks can someone help me please? I would be forever greatfull

    Hi there JesSay241,
    You may find the troubleshooting steps in the article below helpful.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    -Griff W. 

Maybe you are looking for