MAC BOOK PRO after Yosemite Boot 50 %
Hello ,
I've a Mac Book pro and after installing Yosemite boot at 50 % AND STOP.
Startup – Computer Stops or Delays
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)
Similar Messages
-
My mac book pro is not booting after sleep
My mac book pro is not booting after sleep...Pls anyone help me!!!
Hello adibah2731,
We've an article that proivdes a host of useful tips that can get your Mac booting up again.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Cheers,
Allen -
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
17-inch Mac Book Pro does not boot. No startup chime and no video.
Hey guys,
My Mac Book Pro refuses to boot. Whether it's running off the power supply or on the battery, it does the same thing: I hit the power button, I hear the disc drive make it's usual sound, but no apple boot chime, and no video. It just sits there, blank screen and all. Last night in my frustration, I held the power button down for about 5 seconds and the light in front started blinking as if it was expecting a firmware update. I immieditely shut it off. I hope that didn't make the problem worse, but regadless it still has the same problem. I have a feeling my logic board took a dive. What's weird is, I was using it, it was plugged in, I left it for a bit, it went into sleep mode, and that was the last time it was on. It's as if I can't get it out of sleep mode. I've turned it on and off a dozen times, taken the battery out, etc.. And nothing. Any suggestions?Dead On Arrival (DOA) Product: System Failure Out of the Box
An Apple-branded hardware product is considered DOA if it shows symptoms of a hardware failure, preventing basic operability, when you first use it after opening the box. If you believe that your product is DOA, please call AppleCare Technical Support at 1-800-APL-CARE (1-800-275-2273) within 30 calendar days of the invoice date. AppleCare Technical Support will determine whether the product is DOA and offer you the following options:
Replacement: Apple, at its expense, will ship another of the same product. AppleCare Technical Support will put you in touch with an Apple Store Customer Service Representative who will arrange for replacement and the DOA product’s return.
Service: You may have the product repaired. However, once you choose that option, you may not request replacement of the product.
If AppleCare Technical Support determines that a returned product is not DOA, Apple will apply Apple’s standard product warranty to the product. Further, if AppleCare determines that you have misrepresented a returned product’s condition and that the product is not DOA, Apple may impose a $400 handling fee.
This DOA policy applies only to Apple-branded hardware products currently offered at the Apple Store. As new products are offered, Apple reserves the right to determine whether or not this policy applies. This DOA policy does not apply to third-party products that do not bear the Apple brand name. You must call the manufacturer directly with any third-party product issues. -
i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?
Assuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD. -
Help I tried opening my Mac book pro after shutting it down but it won't open and all I get is a grey screen and a mo Jong mouse but nothin else so can u help me ??
Hey HJA96,
Thanks for the question. I understand that your MacBook Pro is booting to a gray screen. The following article addresses this symptom, and provides relevant troubleshooting information:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Some of the steps included:
- Disconnect, test peripheral devices and network cables
- Perform a Safe Boot
- Reset the NVRAM / PRAM
- Start from your Mac OS X Install disc; use Disk Utility
- Check your cables and power source
- Remove third-party RAM and internal hardware
- Perform an Archive and Install installation of Mac OS X
- Perform an Erase and Install installation of Mac OS X as a last resort
(See article for full information on all of the above)
Thanks,
Matt M. -
Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?
Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton -
I updated my Mac Book Pro to Yosemite, now it says it's not compatible with my Cannon copier. Any ideas how to fix this problem so I can use my Cannon copier again? Thanks for any help!
If MF4150 is correct...
http://www.usa.canon.com/cusa/home
search MF4150
click >Drivers & Software
Verify or choose Yosemite 10.10 - then click the [+]
Again verify Yosemite > click agree > click [DOWNLOAD]
The rest should be self-explanatory
ÇÇÇ -
I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,
Try starting in safe mode:
Ciao. -
I recently update my 4 year old mac book pro to Yosemite. I am now getting a pixilated log inn scene from time to time. What do I need to do?
how often does this happen for you?
-
Mac Book Pro with Yosemite 10.10.1 software and a HP Photosmart C4599
Hello I have a Mac Book Pro with Yosemite 10.10.1 software and a HP Photosmart C4599 All in one printer and I am unable to install my printer, it will print when cable is connected but I cannot add it wirelessly. i have checked for software updates but none are available.
Hi,
A software for a such is no longer available however you may set a wireless connection by following the workaround below:
Step one: Restore the network defaults:
1. Press the Wireless button on the product.
2. Press the button next to the down arrow on the display until Restore Network Defaults is highlighted, and then press OK.
3. Confirm that you want to restore the network defaults.
Step two: Turn the wireless radio on:
1. Press the Wireless button on the product.
2. Press the button next to the down arrow on the display until Turn Radio On is highlighted, and then press OK.
Step three: connect the Mac to your printer:
1. From the Mac click the WiFi icon and then click on Join Other Network.
2. Click on Show Networks and connect to the listed HPSETUP network.
Step four: connect the printer to your wireless network via the EWS interface:
1. Open Safari.
2. Click the Safari menu and then click Preferences.
3. From the Advanced tab, check both of the checkmarks under "Include Bonjour" and press OK.
4. click Bonjour from the top menu, then select the printer to load its EWS page.
5. Click on Networking, then click the Advanced tab.
6. Type the wireless network name as SSID.
7. Select the Infrastructure option
8. Select the correct security type as WEP Encryption or WPA-PSK Authentication and type the password of your router.
Note: If you are not sure about the SSID and the security type, click the WiFi icon on your Mac and select Open Network Preferences.
Click the Advanced button and locate your home network, the Network name aquals to SSID and the exact security type is listed.
Once you are done click on Apply and the wireless light should lit.
Then reconnec tthe Mac to your router, open ystem Preferences > Printers & Scanners and add the printer as Bojour by clicking the plus sign.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.
Hi I have just got back from the apple store and the guy at the Genius bar looked at it and said it was a manufacturing fault, and because it has been like it since new, and seemed to be getting worse he replaced the computer and I have a new warranty from today.
We got the feeling as soon as he looked at it that he has seen this before, I did say to him I was concerned it would be a replacement screen and I was not really happy about that as it was so new, and he said that was the normal procedure, but as the fault was already there at new and it was getting worse they would replace. I could not have asked for a better service.
Not unpacked this one yet but am hoping all is good, its a great little machine.
Thank you for your responses, and I hope this might help someone else. One thing it did not seem to be missing pixels but something to do with the screen production? -
Photo Elements 12 editor shuts down when I select enhance>Photomerge>Panorama. I am using Mac Book Pro with Yosemite operating system. Otherwise, the program preforms properly. Any suggestions?
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Mac Book Pro doesn't boot (twice; after updating) and slow performance before these incidents
Hi,
Maybe someone can help me resolving a (re) boot issue with my Mac Book Pro. Last few weeks I experienced a tremendous drop in performance (start-up as well as handling and using applications).
Yesterday I downloaded and installed an app to clean stuff from the mac, such as binaries that aren't used, cache files, etc. It resulted in substantial better performance. Than, I used the updater on this application to update. This morning, the Mac wouldn't boot. After several attempts I used the old DVD with Mac OS X to re-install and boot. That worked.
Following this approach, I received two messages (that HP apps weren't secured or something and therefor disabled). Than I updated the Mac OS X and later this evening it asked me if I wanted to install some (4) other updates as well (don't know what updates these were). So I updated but now I am back at square one: My Mac doesn't boot. I do get the grey starting screen, but now even the 'apple' logo is missing.
Anyone else experiencing these problems and have any clues on how to fix it? By the way, I also tried to alter permissions on all files on the main hard drives (to ensure that I do not always have to sign off on updates and or changes of applications). Would that have caused problems?You seem to have a lot going on here, so it's hard to know what's wrong. You likely had some underlying problems before doing the Software Update.
Here's a link that might help with the grey screen problem:
http://support.apple.com/kb/TS2570
Which app did you download?
If you can get booted up, check in the System Profiler to see that all of your RAM is recognized--if not, you may need to reseat one or both sticks.
If you can boot from your install disc, run the extended version of the Apple Hardware test to check for hardware problems. Freezing can be caused by a dying hard drive, which can also tend to corrupt software.
While booted from the install disc, navigate to Disk Utility and repair your boot disk. You can do this 2 or 3 times even if it says no problems found.
While in Disk Utility, check to see that the SMART status of your hard drive is verified. If not, you will need to replace the drive.
It probably wouldn't hurt to reinstall the OS.
Do you have a good, up to date backup? If not, it would be a good idea to make one as soon as you can, just to be on the safe side.
Have you tried a Safe Boot?
http://support.apple.com/kb/ht1455
http://support.apple.com/kb/ht1564
These are just a few ideas to get you started. Post back if you have more questions.
Good luck! -
Mac Book Pro with Yosemite run clearly slower than Mavericks
HI
I come from other thread about problems whit wifi connection with Yosemite. The great Linc David solved the problem and that has meant thoroughly clean the Mac
I have a Mac Book Pro 13", early 2011 (!only four years¡) with 8 GB of RAM (the maximum), 2,7 GHz Intel Core i7 processor and whit Yosemite everything it´s significantly slower that with Mavericks: open a word, do a screening...even when typing fast some first characters don´t appear.
My conclusion it´s clear the max OS that you can install in one Mac Book Pro 13", early 2011,(like me) it´s Maverick. Yosemite clearly slows the mac.
If someone can convince me otherwise I would be very grateful, because I did not backup before installing the Yosemite. And i don´t know how go back. Here you have the Entrecheck report:
Thanks in advance
Jesus
Problem description:
Mac Book Pro 13”, early 2011 , 8GB 1333 MHz DDR3 (the max), 2,7 GHz Intel Core i7, run clearly slower with Yosemite than Mavericks
EtreCheck version: 2.1.8 (121)
Report generated 13 de abril de 2015, 15:28:48 CEST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 30
Video Information: ℹ️
Intel HD Graphics 3000
Philips 244E 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.3 (14D131) - Time since boot: 11:32:43
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (274.47 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Iomega Storage 500,11 GB
EFI (disk2s1) <not mounted> : 210 MB
Time Machine (disk2s2) /Volumes/Time Machine : 499.76 GB (293.79 GB free)
Iomega Storage 500,11 GB
EFI (disk1s1) <not mounted> : 210 MB
Copia de Seguridad (disk1s2) /Volumes/Copia de Seguridad : 499.76 GB (316.45 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Microsoft Compact Optical Mouse 500
C3PO USB SMART CARD READER
Wacom Co.,Ltd. Intuos5 touch S
Firewire Information: ℹ️
iomega eGo Rugged FW USB2 800mbit - 800mbit max
EFI (disk3s1) <not mounted> : 210 MB
JVT (disk3s2) /Volumes/JVT : 999.86 GB (868.78 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 30
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.6.3) [Click for support]
[not loaded] com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
[not loaded] com.vmware.kext.vmnet (0249.89.30) [Click for support]
[not loaded] com.vmware.kext.vmx86 (0249.89.30) [Click for support]
[not loaded] com.vmware.kext.vsockets (90.6.0) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
[not loaded] com.emu.driver.EMUUSBAudio (1.4.0 - SDK 10.6) [Click for support]
[loaded] com.hzsystems.terminus.driver (4) [Click for support]
[not loaded] com.macvide.driver.MacVideAudioConnectorDriver (1.0.0) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
MySQLCOM: Path: /Library/StartupItems/MySQLCOM
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudphotosd.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.gamed.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.photolibraryd.plist
[killed] com.apple.rcd.plist
[killed] com.apple.SafariCloudHistoryPushAgent.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
14 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[failed] com.apple.mtrecorder.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
6 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[loaded] com.divx.dms.agent.plist [Click for support]
[loaded] com.divx.update.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.wacom.wacomtablet.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[failed] com.apple.spirecorder.plist
[loaded] com.bombich.ccc.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Mail Aplicación Hidden (/Applications/Mail.app)
Dropbox Aplicación (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
DirectorShockwave: Version: 12.0.3r133 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
iMedia Converter Deluxe
iTube Studio
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MySQL [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Destinations:
Time Machine [Local]
Total size: 499.76 GB
Total number of backups: 2
Oldest backup: 2012-11-25 14:45:01 +0000
Last backup: 2012-11-26 22:08:06 +0000
Size of backup disk: Excellent
Backup size 499.76 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
9% mds
5% WindowServer
0% fontd
0% taskgated
0% com.apple.ifdreader
Top Processes by Memory: ℹ️
412 MB Finder
172 MB Safari
137 MB Mail
86 MB com.apple.WebKit.WebContent
69 MB WindowServer
Virtual Memory Information: ℹ️
2.92 GB Free RAM
1.95 GB Active RAM
762 MB Inactive RAM
1.64 GB Wired RAM
21.92 GB Page-ins
212 MB Page-outs
Diagnostics Information: ℹ️
Apr 13, 2015, 04:20:54 AM /Library/Logs/DiagnosticReports/BDLDaemon_2015-04-13-042054_[redacted].cpu_reso urce.diag [Click for details]
Apr 13, 2015, 03:55:58 AM /Users/[redacted]/Library/Logs/DiagnosticReports/cloudd_2015-04-13-035558_[reda cted].crash
Apr 13, 2015, 03:55:31 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-04-13-035531 _[redacted].crash
Apr 13, 2015, 03:54:03 AM Self test - passed
Apr 13, 2015, 03:53:27 AM /Library/Logs/DiagnosticReports/BDLDaemon_2015-04-13-035327_[redacted].cpu_reso urce.diag [Click for details]
Apr 13, 2015, 03:33:24 AM /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-04-13-033324_[redacted]. crash
Apr 13, 2015, 01:03:43 AM /Library/Logs/DiagnosticReports/BDLDaemon_2015-04-13-010343_[redacted].cpu_reso urce.diag [Click for details]
Apr 13, 2015, 12:59:40 AM /Library/Logs/DiagnosticReports/AntivirusforMac_2015-04-13-005940_[redacted].cp u_resource.diag [Click for details]
Apr 12, 2015, 10:28:40 PM /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-04-12-222840_[redacted]. crash
Apr 12, 2015, 07:58:07 PM /Library/Logs/DiagnosticReports/System Preferences_2015-04-12-195807_[redacted].hangIn fact many Mac forums talk about change the hard disk mechanical to other of solid state as solution for MacBook Pro.
Maybe you are looking for
-
'Hiding' a (published) podcast until a future publication date
I have a valid XML feed. How do I 'hide' items from view until a date in the future? I have <pubDate>Tue, 10 Jul 2007 12:00:00 -0700</pubDate> set for example, but the podcast still shows up as available now. How can I publish but not make an item av
-
Hi Everybody, Greetings!!! I am new for XI, pls help me to sort out the queries given below: 1. Can u all help me out for step by step procedure to be followed for BAPI to File Scenario. (Guide me all configuration step to be performed in R/3 & XI) 2
-
How I can set limit of JTextField to 5 signs???
-
Setting the value of a java variable in javascript function
How can i set the value of a java variable in a javascript function? <% String fName = ""; %> now i want to define a javascript function which can set the value of fName to the value it has been passed. <script language="javascript"> function setJVal
-
Insufficient Privileges when executing DBMS_STREAMS_AUTH.grant_admin_privil
Greetings Guru's When I execute dbms_streams_auth.grant_admin_privilege procedure as a user granted the DBA role. I get the following error stack. ORA-01031: insufficient privileges ORA-06512: at "SYS.DBMS_STREAMS_AUTH", line 1211 ORA-06512: at line