Mac Book Pro back to the standard settings
Hi
I want to set my mac book pro (2010) back to the standart settings... by that i mean like a new mac book pro.
How do i do that?
Welcome to the Apple Support Communities
To restore the MacBook to factory settings:
1. Insert the Mac OS X DVD that came with the computer, and press C key while your computer is starting.
2. After your computer has started from the DVD, go to Utilities menu > Disk Utility, select Macintosh HD in the sidebar and erase the disk.
3. Close Disk Utility and install Mac OS X. After installing, open > Software Update to install the latest version
Similar Messages
-
How do I recover my Mac Book Pro back to the day I purchased it? Will I lose apps that came with the Mac Book if I recover it?
Press the command and r keys when turning on your Macbook. Do not release those keys until you see the apple logo...
Disk Utility will pop up.....Your choices are to reinstall, you will not lose anything....
if however, you decide to format/erase your drive, then reinstall, you will lose everything...
suggestion - back everything up and do a clean install.
good luck -
Does anybody know how I can get my Mac Book Pro back, which was stolen after a class I taught?
I have the store receipt, its serial number, however I had not installed i Cloud on my Mac Book and I'm not able to find my Mac back.
Thanks for helping me!Sorry to say but you are out of luck.
What To Do If Your Mac Is Lost Or Stolen
If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops
8. Hidden 2.0
9. Prey 0.6.2 -
How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps! -
I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?
.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH -
I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?
You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years. -
Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?
Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton -
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
I have transferred my itunes from pc to new mac book pro. In the syncing of ipod have lost playlists. Is there a way of getting them of old pc library into itunes on mac. Seems to only allow me to do it song by song?
I have transferred my itunes from pc to new mac book pro. In the syncing of ipod have lost playlists. Is there a way of getting them of old pc library into itunes on mac. Seems to only allow me to do it song by song?
-
How can I add a Epson Stylus SX445w to my Mac Book Pro
This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help meYes I did everything that I was instructed to do!
Cheers
Joyce -
My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?
Mj
Do you mean a case for the external hard drive? See here. Hope this may be helpful to you.
Regards,
Joseph -
i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install. I know configured from Apple is 8 GB, but can I put 16 GB after?
Yes, you can install 16GB in your new macbook pro.
Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
Good luck. -
ive got a mac book pro i bought the lead to connect to the tv but is there a lead for the sound to come out of the tv and not the laptop?
Depends which Macbook Pro, depends what cable you have. MBPs from 2010 onwards can transmit audio through their Displayport connectors if you have an HDMI input on your TV and an adaptor which also transmits audio. Not all Displayport-HDMI adaptors do this. If you're trying a VGA input on your TV, that will not carry audio.
If your MBP is older than 2010, you will need to use a separate audio cable to connect from your computer's 3.5" mini audio connector to the appropriate audio input on your TV.
Matt -
I am debating between the 13in 2.9ghz mac book pro or the 13in 2.5 ghz mac book pro with all the same specs bbut for me i am trying to see which one for the money is better becuase the 2.5 will run me 100-200 dollars less than the other
Only you can make that determination. All things being equal the 2.5 GHz model is slower.
-
When I try to open a pages document on my mac book pro it says "The file 'thesis.pages' couldn't be opened." But i can open the same file on my iPad and iPhone without a problem.
Thanks very much for the instructions. I encountered this problem this morning myself and the recommendation fixed the problem immediately. When things like this happen with iCloud and Pages it makes me wonder if I might be better off using something else, having just recently had to fix the problem that the current Pages can't read documents I created with a much earlier version until they were "upgraded" by an interim version.
Maybe you are looking for
-
CS3 problems reading NEF Files after installing Yosemite
Since updating to Yosemite on my MacBook Pro, CS3 no longer works properly. Instead of thumbnails, Bridge displays icons for Nikon NEF images. When I click on the icon, I'm told "Could not complete your request because Photoshop does not recognize th
-
Struts: How to set 'disabled' attribute name using a property in ActionForm
I have the following struts tag: <nested:select property="someProperty" disabled="<nested:write property="screenReadOnly"/>"> <html:options .../> </nested:select> where 'screenReadOnly' is a boolean variable in the ActionForm. However this does no
-
I realise that this post might be quite similar to one posted yesterday, but I thought that the problem was sufficiently different to warrant a new thread. I'm trying to use the Desktop.open(file) method to open a file with the default application -
-
Hello everybody, I need your help. I used two system SAP by Design and other for finance,I have a difference of my Euro bank account balance, I need to adjust that but I don't have any idea how to do it. our currency is the AED the Euro is a foreign
-
i m using halt command to shutdown my netbook , and it gives me those messages : sending SIGTERM to remaining processes... sending SIGKILL to remaining processes... Unmounting file systems. Unmounted /sys/kernel/debug. Unmounted /dev/hugepages. Unmou