Mac book pro facetime hd camera is not connected

Built in camera is not being detected by applications.  The message "there is no connected camera" is displayed

http://support.apple.com/kb/ht2090

Similar Messages

  • HT1338 my MAc Book PRO 13" Retina display will not update.  It crashes every time I try to do an update.  I have sent in the information on each update but so far nothing back from Apple.

    my MAc Book PRO 13" Retina display will not update.  It crashes every time I try to do an update.  I have sent in the information on each update but so far nothing back from Apple.  Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash.   This mac book is less than a month old.

    That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed).  Version 4.2.1 marks the end of your updates for that device.

  • Ive got an mac book pro i bought the lead to connect to tv but is there a lead where you can have the sound from the tv and not through the laptop?

    ive got a mac book pro i bought the lead to connect to the tv but is there a lead for the sound to come out of the tv and not the laptop?

    Depends which Macbook Pro, depends what cable you have. MBPs from 2010 onwards can transmit audio through their Displayport connectors if you have an HDMI input on your TV and an adaptor which also transmits audio. Not all Displayport-HDMI adaptors do this. If you're trying a VGA input on your TV, that will not carry audio.
    If your MBP is older than 2010, you will need to use a separate audio cable to connect from your computer's 3.5" mini audio connector to the appropriate audio input on your TV.
    Matt

  • My mac mac book pro w retina display will not go to sleep when I close the lid or put it to sleep.

    My mac mac book pro w retina display will not stay asleep when I close the lid or put it to sleep.
    I put the computer in my bag and when I open it again the machine is so hot I can almost not touch it.
    I am affraid that the hardware is allready fried.
    Also when I press a key to restart after it has been idle for a few minutes it often takes up to a minute to wake back up.
    This machine is bran new..
    What should I do?

    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    If no success, then use your warranty and bring it in to the nearest Apple repair facility for rectifying this problem.
    Ciao.

  • My mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt. what shall i do for this issue?

    my mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt

    Gray screen at start up?
    http://support.apple.com/en-us/TS2570

  • I have a 2010 mac book pro and track pad is not working well, is there a problem with that year?

    I have a 2010 mac book pro and track pad is not working well, is there a problem with that year. I heard that the 2011's had track pad trouble.

    All recent versions of Mac OS X use bash, so avoiding Mavericks won't help you with that problem (which isn't a problem for most users).
    iWeb is another matter. My advise: migrate your website to Wordpress first and start thinking about upgrades later.

  • I was wondering if i am entitled to a free upgrade to the latest mac book pro that was recently released not that long ago?

    I was wondering if i am entitled to a free upgrade to the latest mac book pro that was recently released not that long ago?

    No, you're not entitled to a new MacBook.  If I wanted the newest one, I'd sell the one I just bought and buy a new one.
    Morgan

  • CI********C13 is the serial no. Mac book pro. Blinking folder unable to connect the hard drive why?

    CI********C13 is the serial no. Mac book pro. Blinking folder unable to connect the hard drive why?
    <Personal Information Edited by Host>

    That means that a valid startup disk can't be found.
    A flashing question mark or globe appears when you start your Mac - Apple Support
    Your startup disk could be corrupted, the disk failed, or poor connections
    Reset the SMC and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try booting to Recovery and repairing the HD
    OS X: About OS X Recovery - Apple Support
    Next reinstall the OS if Disk Utility in Recovery can see the HD
    OS X Yosemite: Reinstall OS X
    If the HD can be found check the connection. Next replae tthe HD
    Last:
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • When I FaceTime my wife from iPad her iPhone rings but not our Mac book pro. They both used to ring. Mac book pro FaceTime doesn't seem to be able to send or receive FT calls

    When calling from the Mac book pro it shows up on my iPad and will say connecting but never connects. On the Mac book it just keeps ringing

    I can't believe it!!  But this answers my question.  I pair up quickly between my iphone5 and iMac, but cannot transfer pics from my iphone to the iMac over Bluetooth as I expeceted I would easily be able to do.  After all, I did this with my old Mac and a simple Motorola cell phone years ago.
    So, the answer is that file transfer from iphone5 is not supported.  Really!!
    Not sure why capabilites have regressed, this is disappointing, but thanks for the answer, at least I know to stop beating my head against the wall searching for some hidden box to check.  This seemed like such an obvious capability between Apple devices I couldn't understand why I was having such difficulty.  It seemed like it would be seamless, but it can't be done.  Baffling.

  • I have just purchased a mac book pro. I't will not boot and the keyboard is broken. Also it did not come with an install disc. It's a 2011 13" mac book pro. Any guidance would be appreciated. This is my first mac.

    I've just purchased a mac book pro. It has crashed and won't boot. The keyboard doesn't function and i have no install disc for the original os. What can i do?

    fuuunkdat wrote:
    it said: the volume macintosh could not be repaired.
    This suggests that your HDD may be corrupt.  In order to try and repair it, we must get into the recovery partition or use the original installation disks.  Try and start your MBP using COMMAND R.
    http://www.apple.com/osx/recovery/
    If that works, note the 4 option menu.  Select Disk Utility>First Aid and verify and repair the disk.
    If COMMAND R fails, try OPTION COMMAND R.  If that works, try the same as above with Disk Utility.
    If neither works, it suggests that your MBP came with Snow Leopard.  You will need replacement disks which can be ordered from Apple customer service.  Have the serial number of the MBP handy and there is a charge.
    Ciao.

  • After MAc Book Pro update NO Camera on SKype

    Updated my MAc Book Pro to OS Yosemite 10.10.2 and updated skype to latest version and since then NO camera. I can see the person I call they can only see a black/gray screen although my camera on my screen is shining green.

    I have checked photo booth and that tells me my camera is off.
    The green light on my screen is working.
    I have checked the USB header on the system profiler but cannot find it in utilities.
    I ahve switched the computer off and have had it off for a longer period of time.
    All sstill no camera. It seems that everything points to that the camera is there but does not want to funtion in relataion to anything.
    What to do or try?
    As I am heading for China end of the week, it would really be great to have this skype working so I can check in with my kids whilst I am gone.
    Appreciate and am grateful fo any help that can get it to work.

  • Mac book pro can detect wifi but not DNS server

    MMy Mac book pro will detect the wifi at school but it won't detect the DNS server meaning that I cannot access the internet! Help!

    If the Mac connects to the Wi-Fi network but webpages do not finish loading while using Safari, it may be a DNS issue, try the following:
    System Preferences>Network>Select Wi-fi on the left and click on "Advanced..">select DNS tab>add 8.8.8.8 bellow DNS servers>click on OK then Apply.
    If thats not the case, please specify to us why you think the mac does not recognize DNS server.

  • Hi...is it fine to charge mac book pro when its closed or not switched on?

    is it fine to charge mac book pro when its switched off, or not in use. or one always keep it open during the charging?

    It is fine. It won't over charge.

  • Whenever Retina Mac Book Pro runs HOT - FCPx runs NOT - And it does so A LOT

    These past weeks I have been doing more and more work on the Retina Mac Book Pro. Only thing that has been bugging me is that I cannot seem to rely on its performance. At times FCPx is blazing fast and others so slow that one could think I was running it on an iMac from 1998.
    Once it gets slow... It will take about 5 seconds for a clip that I select in the event browser to appear in the viewer. And i.e clicking the inspector will take about 4-8 seconds for it to open...
    So I decided to troubleshoot.
    Basically it is VERY simple.. Whenever the fans start churning on the Retina Mac Book Pro, the whole app simply quits performing. Shutting down the computer for about 10 minutes will alleviate the problem. Other strange thing is that no other app seems to be affected by this issue. PPRO, AE, Photoshop, Aperture, Safari etc etc etc... Only FPCx and Motion. I have not experienced this problem on any of my Mac Pros.
    Problem is that the fans start spinning like crazy only after 10 min. of working in FCPx. And that with Proxy Media.
    I have been noticing that people on newer (Thinner) iMacs are complaining over performance issue and wonder whether those might be heat related as well.
    If anyone else are experience such issues, I sure would like to hear about it. And if anyone has suggestions to a possible workaround I too would love to hear about it as this is killing my workflow !
    Thanks
    Specs
    rMBP 2.6 GHZ | 512 SSD | 16 GB RAM | 1GB NVIDIA Graphcis (Always set to high performance)
    OS X 10.8.2 | FCPx 10.0.7

    Studio Engineer wrote:
    …  no other app seems to be affected by this issue. PPRO, AE, Photoshop, Aperture, Safari etc etc etc... Only FPCx and Motion.
    me no engineer ... ahh, you did know that!
    but …
    Aren't FCPX + M5 the apps in your list which rely most on the graphic card? I'm not familiar with Grand Central and other OS-designs, nor can i confirm a built-in heat-sensor for that part of the Mac, there are sensors erverywhere - why not?  …
    But if I had designed the graphic-card as co-processor, this would be essentiell.
    And your observation and conclusions make a lot of sense!

  • My mac book pro 17" model 1229 does not work. It askes' me to :'you need to restart your computer.Hold down Power button for several seconds or press the Restart button

    Mac book pro 17" model 1229 displaying: "you need to restart your computer. Hold down the power button for several seconds or press the Start button

    Your MBP may have had a kernel panic.  If so, post the kernel panic per these instructions:
    http://support.apple.com/kb/ht2546
    An Apple Hardware Test may be useful:
    http://support.apple.com/kb/ht1509
    Note that an error free AHT is not definitive.
    Ciao.

Maybe you are looking for