Mac book pro hard disc replacement and back up from time machine

Recently i replaced my  mac book pro's hard disc and now i am facing various problems such as:
Itunes  does not recognize any of my devices (iphone  & ipad) and iphoto can not import my photos.
Before replacement i had made back up with time machine. Can You please tell me how i will brink my laptop
Into initial condition through time machine and all to be again as it used to be before disc's  replacement
Thanks in advance
Stavros

Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta

Similar Messages

  • HT201250 Circle and cross through iTunes icon afte the seagate hard drive replaced and restored data from time machine backup.

    Circle and cross through iTunes icon: had the seagate hard drive replaced and restored data from time machine backup. Why does the iTunes icon have a circle and cross through it? As though incomplete? tried everything and still Circle and cross through iTunes icon.

    No it isn't something you'd find on the computer, it has to be custom installed from the 10.6 installer disc or Software Update if it wasn't before.  It allows you to use older PowerPC applications on your Mac.   On the other hand double check the version of iTunes you have does not require 10.7 minimum either.

  • Safari fails to open after recent hard drive replacement and data transfer from time machine

    The hard drive was replaced by apple under replacement scheme due to seagate failures. It was reloaded with latest ios, but safari would not open, reported failure.
    I had re -installed my backed up info from time machine. i did go into back ups and copied previous safari app, and dropped it on my desk top. It opened ok. Is there an easy way to get this app onto the system and delete the faulty safari file.
    Hope this makes sense.

    guess what, all fixed, the safari app installed by apple on new hard drive was 5 something, but 6.02 was needed, i installed 6.02 but it told me i needed OSX10.8.2 which cost me £13.99 but it now works.
    happy days

  • Can someone please help me re-install my Creative Design 5.5 on my Mac?  My MacBook Pro recently crashed and had to have the hard drive replaced.  The back up from Time Machine is not reinstalling the program.  Since I have the download paid, and codes, I

    Can someone please help me re-install my Creative Design 5.5 on my Mac?  My MacBook Pro recently crashed and had to have the hard drive replaced.  The back up from Time Machine is not reinstalling the program.  Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

    Hi bodegakc,
    If you have the serial number then please use the below mentioned link to download the product you are looking for .
    CS5.5
    Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
    You can also use creative cloud cleaner tool before installing.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Thanks
    Nikhil Gupta

  • The touch pad on my Mac book Pro is very sensitive and causes changes without hardly touching it. Can this be changed or does it need replacement?

    The touch pad on my Mac book Pro is very sensitive and causes changes without hardly touching it. Can this be changed or does it need replacement?

    Touchpads are just that, touchpads.
    You touch it and something happens unfortunately, you can't rest your fingers on it while your waiting to do something else or it triggers a response.
    You either have to train yourself to remove your fingers and keep them suspended, causing wrist, arm and hand pain, or plug in a standard mouse where nothing happens until you press the button, like years of ergonomic experience has shown is a much superior method.
    Touchpads are likely less expensive to produce and breakdown less often under warranty, so just like less expensive to produce glossy screens, it's a cost cutting measure they were  incorporated into our devices and required users to adapt to sweeps, gestures and other useless actions for little benefit.
    I've owned my Early 2011 MacBook Pro for a year now and have only used the trackpad once, the mushy keyboard perhaps only a couple of dozen times. Preferring external devices where I can rest my digits and nothing happens until I apply pressure or use a scroll wheel.
    Needless to say my keyboard area is in brand new condiiton, remains covered from the original packaging, protects against dirt and spills too.
    Mac's keyboard and trackpad area tend to wear out pretty fast, like in about 3 years, making one consider getting a new machine long before it physically fails.

  • I have a Mac book pro with regular drive, I want to replace the drive with SSD, so can I do t for Mac book pro purchased in 2012 and which SSD is recommended. I am looking for 500 to 700GB SSD.

    I have a Mac book pro(13 inch non-retina, i7) with regular drive, I want to replace the drive with SSD, so can I do it for Mac book pro purchased in 2012 and which SSD is recommended.
    I am looking for 500 to 700GB SSD.
    Thanks

    Upgrading your MacBook Pro with a Solid State Drive...
    ...call back with any questions.
    Clinton

  • My husband was trying to reload and delete printers and he some how reset many settings on his mac book pro - how does he go back and set everything for earlier today

    My husband was trying to reload and delete printers and he some how reset many settings on his mac book pro - how does he go back and set everything for earlier today

    As Terence said you're experiencing a kernel panic. Boot into your System install disk and launch Disk Utility from the Utilities menu in the first window after the language selection window. Repair the disk. If DU finds problems and runs repairs do it a second time and then reboot.

  • I have a 2008 Mac Book Pro partitioned running windows and are running out of drive space. Can I upgrade hard drive for more capacity?

    I have a 2008 Mac Book Pro partitioned running windows and are running out of drive space. Can I upgrade hard drive for more capacity? I purchased a faster drive initially, but has 200 GB capacity. I am running out of room and would like to upgrade for more space if possible.
    Can anyone suggest an alternative?

    You don't need to partition your drive to run Fusion, only if you want to run Bootcamp.
    If you have space on your Windows partition, I would suggest you backup your Windows partition, and then, delete the partition using Disk Utility.
    You can now restore your virtual machine to a single volume or repartition if you prefer.
    I would consider upgrading to a unibody MBP (used, refurbished will do) just to be able to access the HD. Opening the pre-unibody MBP is not something you would want to do.

  • Wipe out Internal Mac Book Pro hard drive

    I need help on how to wipe out my internal Mac Book Pro hard drive. I used the Mac Office demo and now the demos are no longer usable. How can I wipe out the mac book pro hard drive? Should I contact my Apple Care service center for assistance, since I am paying for that service and they can walk me through the process? I want to clear out to what it was like when I first got the lappy. Help, anyone? Thanks in advance.

    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    After formatting has completed quit DU and return to the installer. Proceed with the OS X installation. Once OS X has been installed and is running you can then run the installer for the pre-bundled software.

  • My mac book pro runs so slow and little round rainbow keep popping up

    My mac book pro runs very slow and little round rainbow keeps popping up

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • How do i move my photos from external hard drive to my local mac book pro hard drive?

    I have my iphoto files on an external hard drive.  I need to move them to my local Mac Book Pro Hard drive and I want to do it accurately.  Anyone have any advice?

    THanks Niel.
       In typical "me" fashion I asked the question and then did the leg work and researched the answer (instead of doing the research first!).  I learned exactly what you have posted here.  It sounds REALLY simple.  Thanks!

  • HT2584 How to delete programs from my mac book pro hard disk?

    How to delete programs from mac book pro hard disk?

    There is a better chance of getting help if you are specific.
    Does dragging to the trash work? does it use an uninstaller? new to mac and unsure?
    There are even 3rd party utilities to help remove programs.

  • I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    See if exporting them helps:
    Exporting From iPhoto | Apple Support Communities
    Gene

  • I take out my battery out from Mac book pro 15, now put it back can't switch on??

    I take out my battery out from Mac book pro 15, now put it back can't switch on??

    Please describe in detail all you have attempted to do in order to resolve the issue. 
    Troubleshooting a MacBook, MacBook Air or MacBook Pro that won't turn on

  • Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

    Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

    Nope. It just opened the installer and stayed in the same loop.
    It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
    Eveything was working fine until the mountain lion failed install.

Maybe you are looking for

  • Can i have 2 different i phones use the same computer to update

    can i have 2 different i phones use the same computer to update

  • Just bought 1T ext hard drive for back up, addl storage, boot backup?

    I am a NOVICE. Just purchased 1T ext hard drive for backups and additional storage for music, docs, photos, etc. Should I partition, and also include boot? Does this mean 3 equal partitions? Or how much should be dedicated to boot drive? In case you

  • New major release, JE 5.0, is available

    Hi all, We're pleased to announce a new major release, JE 5.0.34. The release contains a significant number of new features and performance enhancements. Complete information can be found in the JE documentation, specifically in the change log. The r

  • "On Hold" on sm50

    Gurus: I see some jobs have a status "On Hold" at sm50. The platform is AIX/DB2-8. -- what does it mean, i.e. hold for what? -- any action needed and if so, what to do? Thanks a lot!

  • Planned support for JAX-WS web services?

    Are there any plans for JDeveloper to support JAX-WS web services in the near future (https://jax-ws.dev.java.net/) I know that I can just import the libraries and develop code from scratch, but it would be nice if I could actually run the code in OC