Mac book pro is unable to display desktop ,only white screen with apple logo is appearing

Hi
I have a Mac book pro, since today morning the Mac book pro is not starting. It just displays the white screen with Apple logo and search signal. Despite waiting for a long time desktop is not coming up.
I have tried to restart it several time but the status remains same. Kindly help.
Thank you
Kind regards
satish

Gray, Blue or White screen at boot, w/spinner/progress bar

Similar Messages

Macbook pro wont load, just gets to a white screen with apple logo

Hello,
I put my Mac to sleep last night. I am trying to turn it on now but it won't load.
The bar comes up at the bottom, fills about 20%, dissapears and then the spinny globe stays there forever, it will not load.
I have tried booting up by holding shift or x and no change.
Worthy of note, I installed leopard also last night.
Ive tried putting the leopard disc in, its being read but nothing changes on screen.
Ive tried holding command + p + r.
Ive tried unplugging, replugging.
Holding alt and choosing boot from disc or efi boot goes to the same white screen.
Holding c makes the disc drive make alot of noise, same white screen with nothing happening.
Nothings happening
Message was edited by: azz0r

azz0r, which OS originally came installed on your MacBook Pro?

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

After running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

after running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

Restart your MBP holding the trackpad down and hopefully the disk will be ejected. Then try to return it and get a refund or put it in the trash. There is nothing that software does for your MBP that you cannot do yourself or with free software.
If can get your MBP started, delete all traces of the offending software. Worst case is that you may have to erase the HDD and reload the OS and your user data. I trust that you have a backup (minus MacTuneUp).
Courcoul has given you his opinion in a very succinct manner, and as you might surmise, I agree with him.
Ciao.

When i start my mac and i got white screen with apple logo

when i start my mac and i got white screen with apple logo n spening round n round

Try here
https://discussions.apple.com/thread/4917686?start=0&tstart=0

TS3824 2011 mac mini won't go past white screen with apple logo

My Mac mini won't move past a white screen with apple logo in the center. What should I do?

Hi ..
If you have v10.7 Lion installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
If you are running a prior Mac OS X, boot from your install disc, run Disk Utility. The startup disk may need repairing > Using Disk Utility to verify or repair disks
And try Resetting your Mac's PRAM and NVRAM

Mac stuck on white screen with apple logo at startup

It's a few days i have this issue.
When i turn on my macmini (late 2009) it does the startup sound, but when the white screen with apple logo appears it stucks on that screen.
To solve this problem i have to unplug the power connector, when i restart it works normally.
This happens randomly, not at every startup.
I switched from normal HD to ssd HD (brand new one), i have the same problem with both HDs.
Since black outs are not good for computers i woult solve this problem.
Does anybody have my same issue or know what's wrong?
Thanks!!!

Hello, tough to tell what it might br.
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

White screen with apple logo and rotating pin wheel. Carried to Peach Mac store and it worked perfect. Now it is doing it again.

White screen with Apple logo and rotating pin wheel. Carried unit to Peach Mac and it worked perfect there. Justed started doing this again. Any help?

Have a look at > Mac OS X: Gray screen appears during startup

Mac book pro is not beinng switched one but screec back light (apple logo) is lighting and screen is also in dim light os x yosemite is not run

my mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt?
hy my mac book pro with retina display is not getting login prompt

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite
What does the screen show - anything?

MacBook Pro stuck on white screen with apple logo. HELP!!

For the past few days my MacBook Pro has been stuck on a white screen with the apple logo and I have tried everything. Does anybody know what I can to to get it to work normally again ?

Read over these articles for possible solutions:
http://support.apple.com/kb/ts2570
https://discussions.apple.com/docs/DOC-5282
https://discussions.apple.com/docs/DOC-3353
Ciao.

How to connect my MAC Book Pro (2013) to a display?

how to connect my MAC Book Pro (2013) to a display?

When you have connected the monitor or the TV to the MBP, open System Preferences>Displays and it should show a category called Arrangement. These links should give some of the details:
http://support.apple.com/en-us/HT204154
http://support.apple.com/en-us/HT202351
Ciao.

I had brought the Mac book pro 15 inch retinal display in nov. 2013 in USA. I lost my luggage in the flight transit at Paris CDG. Now I can't install windows 8.1 which I brought from same store frys at LA, USA. Pl. help. Thanks gyanesh

Dear friends
I had brought this Mac book pro 15 inch retinal display and windows 8.1 and then I left to India my home place for vacation now my problem is during flight transit at Paris CDG. For flight change. My luggage got lost and I had to leave for India. On reaching I waited for 6 days daily going to the Mumbai airport and enquiry but now I am stuck I can't work using windows software s for designing engg.
Can someone tell me a better way how can I install windows if I don't have the driver CDs?
Thanks in advance. Sb sob sob
Pl. help. Thanks

Reinstall OSX using the online recovery.
Then use Boot Camp Assistant. One of the Boot Camp Assistant menu items is download the Windows Support Software (drivers). Make sure you follow the Boot Camp instructions.
Or, Reinstall OSX using the online recovery.
Then install a virtual machine like Parallels, Fusion, or VirtualBox. Then install Windows in the virtual machine.
You can use either Boot Camp or a virtual machine to install Windows. Neither method requires any driver cds.

When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!

When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!

... then run Disk Utility, Repair Disk.
Also:
Resolve startup issues and perform disk maintenance with Disk ...
Mac troubleshooting FAQ: start-up woes
How To Fix Common Mac Startup Problems
Mac Stalls on Gray Screen at Startup - Troubleshooting Mac Startup ...

Are there any apple stickers for the mac book pro 13 inch retina display and where can i buy them

Are there any apple stickers e.g the bart simpson on the computer eating the apple for the mac book pro 13 inch retina display and where can i buy one

coolcosi21 wrote:
i looked at the stickers on the internet but do they have any at the store
I'm not sure where on the internet or which store you mean -- but if you mean an Apple advertisement on the internet and an Apple Store, note that there was an ad for MacBooks that showed them with a variety of stickers but Apple does't sell the stickers and not all of the ones shown in the ad were commercially available.

Why does my mac book pro not show in 1080p on my flat screen

why does my mac book pro not show in 1080p on my flat screen. My mac bookpro always showed in 1080p on a Sanyo Plasma screen. Now when I connect mac book pro I get a blank screen. It will display in 720 but not 1080p. Also will show in 1080i but pictures flicker.

davenug,
given how much we currently know about your MacBook Pro, why do you think that we would know the reason? Please help us to help you by providing relevant information about your MacBook Pro — which model is it? Which version of OS X is installed on it? Is its battery fully charged? Is its AC charger working properly? &c.

Mac book pro is unable to display desktop ,only white screen with apple logo is appearing

Similar Messages

Maybe you are looking for