Mac Book Pro not working replaced logic board

Hi all,
My Mac Book Pro died on me about 2 weeks ago. I was using it like I normally do and then suddenly an error message came up on the screen and a white transparent screen came from the top of the screen to the bottom. Then it shut off. After that we tried resetting the PRAM and tried booting it from a Snow Leopard disk. The machine won't chime. It does spin a disk in the drive though, but there is no video either.
I brought it in to an apple store and they said it was the logic board. I purchased a new logic board , installed it and the symptoms are the same. Does anyone know what the problem could be?
-Steve

I purchased a new logic board , installed it
Make sure you installed it correctly no loose cables, etc.
Do-It-Yourself Laptop Repair
FixYa
Computers
YouTube's video tutorials for Macbook Pros.

Similar Messages

  • My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

    My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

    Mj
    Do you mean a case for the external hard drive? See here. Hope this may be helpful to you.
    Regards,
    Joseph

  • Canon file RAW CR2 and mac book pro not working ...?

    Canon file RAW CR2 and mac book pro not working ...?
    I'm using Digital photo professional software
    and i'm using canon camer 5D mark2 and mac book pro 13inch last version
    i'm trying to shooting directly by Digital photo professional, Remote shooting but the RAW file con't open by the software or mac preview but with photoshop Cs5 can open
    is any one have the same issu ? and how fix it please
    What i did :
    - update camera RAW
    - Update Mac software
    - update Digital photo professional
    Regards,,
    Bandar

    Dear all
    is there any solution  for that ?

  • Time Machine restore on a 17" Mac Book Pro not working

    I have a 17" Mac Book Pro that I had to replace the hard drive in.  I have a time machins backup to restore, but I can find the original Mac OS X install disk.  I tried using the one from my new 15" and it doesnt restore the Time Machine.  Any idea of how to get this to work?

    Please make a Genius Appointment and take it in for service. It's under warranty.

  • My mac book pro 17 inch , 2008 year , display went dark, and the steps in "everthing Mac" book did not work, any ideas?

    my mac book pro 17 inch , 2008 year , display went dark after rebooting from origianl disc, and the steps in "everthing Mac" book did not work, any ideas?

    The router might be bad or incompatible, but let's be optimistic.
    On System Preferences, go to Network/Advanced/PPP. Only two items should be checked: Connect Automatically When Needed and Disconnect when switching user accounts. Uncheck everything else. Now, click Okay on the end of the page. The next time you're online, you shouldn't be disconnected.
    If you still get disconnected like before, we might be dealing with a router issue - which can get rather complicated.

  • Mac book pro was working normal but after shutdown I try to start but not start only black screen

    My mac book pro was working normal , I shut down proper and I want to start again I press power button for start but not start , only black screen same on shut down position , so how can I start my mac book pro again

    Try SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • 90% space is empty in my mac book pro still working slow unable to work properly....

    my mac book pro is working slower and i am unable to do any wprk in it... its more than 90% space is empty.

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

  • Why does my mac book pro not show in 1080p on my flat screen

    why does my mac book pro not show in 1080p on my flat screen. My mac bookpro always showed in 1080p on a Sanyo Plasma screen. Now when I connect mac book pro I get a blank screen. It will display in 720 but not 1080p. Also will show in 1080i but pictures flicker.

    davenug,
    given how much we currently know about your MacBook Pro, why do you think that we would know the reason? Please help us to help you by providing relevant information about your MacBook Pro — which model is it? Which version of OS X is installed on it? Is its battery fully charged? Is its AC charger working properly? &c.

  • My mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?

    my mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?

    Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.

  • Mac book is not working. The logo is there and the sound but the circle keeps spinning. Can only bring up the utlities screen.

    My mac book is not working. The sound is there and the logo on start up. The dial keeps spinning and never stops. I can only bring up the utilities screen and then I am stuck. PLEA

    Try the tips here:
    Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
    Especially holding the trackpad mouse button upon restart and resetting the SMC.
    If it's stuck in there you might have to make a "guide" out of two thin pieces of plastic. Post back if that's the case.

  • Why is my Mac book pro not letting me on my home page

    Why is my Mac book pro not letting me on my home page

    Keep it charging for a while.
    If you can, do not use the computer for a while.
    Let it charge.
    Best.

  • Wifi On Mac Book Pro Not Connecting

    The wifi I am about to lose my mind! The wifi  on my mac book pro will not connect to my home router. I had this problem when I moved in (2 months ago) and the solution would be to unplug the router and the cable modem and plug them back in a few minuets later. However, that fix is no longer working. My network has a password protected option and one without a password. I can connect to the password protected option fine. However, after a period of time that ranges from a few seconds to a few minuets I will get a pop up that says "connection time out has occurred" and I will no longer have internet connection. I have to go back to the wifi icon on the top tool bar and reselect the network. This happens non-stop. When I try to connect to the other password-protected network I will enter my password and it says connection time out has occurred and will not connect. If I enter the wrong password it just says invalid password. EVERYTHING else I own works on the network. My roku, ipod, ipad, kindle, galaxy 4, my roomate's iPhone, and both my roomates' laptops (neither are macs). It is not a matter of there  being too much traffic on the network (like Apple suggested) because I have disconnected literally everything else just to see if it would work and it still did not. My internet works fine when I am on my college campus, but when I go other places like Starbucks or the air port I do notice that my internet is substantially slower then the people sitting next to me.
    So I called Apple because I bought the extended apple care. They went through their long list of troubleshooting...it all failed...so naturally they concluded that it must be the router that’s causing the problems.
    Its not the router. Everythign else works on the network. There is post after post on here about the same exact thing happening to literally hundreds of other people. It is a brand new router. And at my last apartment wifi was included in the rent (so it was the apartment's router not one I bought) and the same problem still occurred (Apple has record of this because I called them then too). At my old apartment I resorted to just plugging it in the wall with an Ethernet cord but unfortunately, that is not an option at my new house.
    Apple said that I can bring it in and have them look at it but it’s obviously going to work there and I really do not have time to drive all the way there for them to just tell me that since it works there it must be router's fault when I know its not.
      Has anyone had any luck in dealing with Apple and Apple Care in regards to this issue

    It would help us to know which model computer you have, which OS version you're using, how much RAM (if applicable), etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    This will help in providing you with the correct troubleshooting solutions.  The more info about your computer you include, the easier it is to help you.
    If you do not know the model of your Mac, you can check under Apple Menu/About This Mac -  which is located in the upper left hand corner of your Finder.

  • Mac book pro hard disc replacement and back up from time machine

    Recently i replaced my  mac book pro's hard disc and now i am facing various problems such as:
    Itunes  does not recognize any of my devices (iphone  & ipad) and iphoto can not import my photos.
    Before replacement i had made back up with time machine. Can You please tell me how i will brink my laptop
    Into initial condition through time machine and all to be again as it used to be before disc's  replacement
    Thanks in advance
    Stavros

    Hi bodegakc,
    If you have the serial number then please use the below mentioned link to download the product you are looking for .
    CS5.5
    Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
    You can also use creative cloud cleaner tool before installing.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Thanks
    Nikhil Gupta

  • Why is my Mac Book pro not picking up my wireless router?

    My Mac Book Pro is not connecting to y wireless modem. It keeps saying it is timed ot. Also the sound is not playing well. Sounds distotes at times and low in volume. Mac Book 2009. 15in

    Software Update only works for incremental updates.. not necessarily upgrades.  MacOS Version 10.x.y where  x = major upgrade and y = incrementenal update
    MacOS v10.5.8 is Leopard and v10.6.7 is Snow Leopard. You first must buy Snow Leopard v10.6 for $29 single use or $79 Family use upgrade price, and then run Software Update to get to the current update revision level which is 10.6.7.

  • Mac book pro not going to sleep

    mac book pro when put to sleep, the monitor turns off, but the light does not indicate sleep mode, I can hear the motor running and it is warm, indicating it is not sleeping.  It is an early 08 mac book pro, running Lion, completely updated.
    Anyone aware of this issue?  Apprectiate any insight.
    Thanks
    JT

    Are you **** closing the lid to put it tp sleep? It might be operating in clamshell mode for some reason. Try the drop down menu for the Apple and click sleep, or option, command ,eject.
    You can check your login items under accounts, and get rid of all those, by highlighting and using the - sign, it could also be a bluetooth item tha is keeping your mac from sleeping, a phone headset, mouse, etc. If it is a blurtooth yhing turn off blurtoth till you need it.

Maybe you are looking for

  • ODI Error while using substring function in odiref.getTable function

    Hi, I am trying to strip the interface table name in the IKM code.Below is the code create unique index      <%=odiRef.getTable("L","INT_NAME","W").substring(0,20)%> *on          <%=odiRef.getTable("L","INT_NAME","W")%>(<%=odiRef.getColList("", "[COL

  • How can I combine two databases, from two computers, to have one combined database of messages?

    My old XP computer recently died and I had to build a new Windows 8.1 machine. While I was down I used a laptop as a temporary replacement. Now my new machine is running fine and receiving e-mail, but I now have two databases--one on the new machine

  • Query Running very slow.............

    Hi All, The below query takes long time to execute. Please review this and provide me the better solution by which i can get the faster result . I have created the index in the txnlog table on timestamp,serialno, and in alt_merchant am on alt_merchan

  • AP not joining our vWLC

    Hello, We're currently using a new Virtual WLC and we have over 45 AP's connected to it without any issues.  Recently, one of our AP's started having issues joining the controller and I'm not sure why not.  On the controller it says... Reason for las

  • UUID vs Int as a bdb key

    Dear All, We are having to maintain a lookup table mapping int<>UUID as the objects we are storing are keyed on UUID but the BDB has been designed using an int as the key. This strikes me as overly complex etc. & as such I was wondering what the perf