Mac book pro  screen went black and computer won't respond

I was using my MacBook Pro , which I only bought a week ago , when the screen suddenly went black and the computer seemed to power down , when this happened it was on 40% battery , I plugged In the MagSafe it didn't seem to light but when I looked closely it was on but it was very dim and flashing green and orange .  When I put my ear to the case I can hear a faint noise ,  can any please help ?

Jordankaye,
since you’ve only had your MacBook Pro for a week, you’re within the 90-day telephone support period with Apple. Make good use of it while it lasts and contact Apple directly — this is a user-to-user forum, and we don’t have all of the resources which Apple has at its disposal.

Similar Messages

  • My Mac book pro screen is black and I get a start up chime and can hear the sound changing when I ouch te buttons to change it

    How do I make the Mac book work

    1. Power off  the computer using power button, Wait a while. Reatart.
    2. Press F2 key couple of times.
    3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
        If this doesn't help. contact Apple.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/

  • I have an iMac running Lion and W7 with boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts but that's it..

    I have a 5 month old  iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it. 

    Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
    It sounds like this may have happened...
    Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
    http://docs.info.apple.com/article.html?artnum=107854

  • Why does my mac book pro screen go black when it goes to sleep and then will not light up again unless I unplug the power cord

    When I either leave my mac book pro open, but idle long enough for it to go to sleep or close the top and put it to sleep, the only way to light up the screen again is to diconnect the mag. connect power cord. Any ideas why and/or how to  correct this problem?

    So this is what I got when I took my computer into the apple store to have it diagnosed.
    After the apple technician performced several tests, the only thing that fixed the issue was an SMC reset. Based on this he figures it is probably a software or firmware issue that is going on. He is a little concerend how ever that the fans of the comupter don't reach maximal rpm when the computer is displaying the issue. So he recorded the problem, and told me to just perform the SMC reset as needed for the next couple months and wait for a new update from apple. If the issue persists I am to go back to the apple store and they will take the appropriate steps.
    He said an SMC reset doesn't hurt the computer in any way, so its safe to do. I am gonna contact blizzard and let them know about the issue as well because if it is software, it could be their game (Diablo 3) that is causing the issue as well. If I hear of anything new i will let you know. So get on the blizzard form and let them know of the issue to fix the problem faster.
    Thanks for your help,
    Tetrault

  • My mac book pro screen is black

    I have a 15 inch mac book pro. I dont know the year or type because i got it as a persent and opened it later. The battery is removable and it is silver. When starting it up it chimes like it normaly would. I just stoped working one day when i got home from school. If i change the volume i can hear the indicator that it is changing. I know you can solve it because other people had the same problem as me. Also the keyboard doesnt work so i use a different one. Can i get this solved without taking it to the apple store. Thanks.

    If the battery is removable, it is pre 2009.
    Try these 2 things, if no joy take to an Apple store for a FREE diagnosis, they will then give you your options.
    SMC reset;
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    PRAM reset:
    ote: To print these instructions, open Help Viewer’s Action pop-up menu (looks like a gear), then choose Print.  
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.

  • Has anyone experience Mac Book Pro screen went alien green and black?

    Hi...I was using my mac when the screen suddenly turned alien green and black, I can still use it though (like save the file and so on). It turn alright after you restart the computer, but I'm afraid if something has gone wrong.Does anyone ever experience the same problem? Does anyone know what is wrong with my mac? I start using this computer since November 2008. Cheers!

    Update:
    I brought it into the Apple Store near my house once. Booted up fine twice. Brought it back, because the green and black vertical lines, and the inversion of colors froze the computer 4 times after the visit. The Apple Genius ran a MacBook Pro NVIDIA graphics card test, which went well until it FAILED one of the tests.
    I had the option to have it fixed in the course of a week, but I thought that since it froze only a few times, that I could work through it (I have important final projects coming up), but now it won't start up. I will have to have Apple ship it away to fix it, because they are behind in their repair shop in the store. So, I will be without it for a week.
    They said it had something to do with the logic board, which I think is part of the motherboard. So, I am glad I backed up most of my projects' data, as they said they might have to erase data when they fix it.
    So, save your files onto external media (HD, flash drive, CDs, DVDs, etc.), and don't let this problem persist; have an Apple Genius check it out, so that you're not in my boat.
    I wish you the best in your troubleshooting!

  • My macbook pro screen went black and won't display back to the normal screen. When I turn it on I can hear the computer starting up and the keyboard light turn on but the screen stays black. What can I do? Help please!

    Please help! I can't get my screen to turn back on. It just stays black when I turn it on. Is there anything I can do to reboot it or am I just out of luck
    Thanks!

    Did you buy the Applecare extended warranty? If not then you will need to pay for whatever repairs need to be done.
    You will need to take the system to an Apple store Genius Bar for a check up.

  • Installing Windows 7 on my bootcamp partition (mid-2009 mac book pro with mountain lion) My computer won't boot from the Windows 7 Install DVD.

    Hello,
    I have been trying to install Windows 7 on my macbook pro (mid 2009, MBP53). I have successfully created a bootcamp partition using the assistant. When the computer tries to boot from the windows 7 install dvd, the screen is just black. The dvd spins for a bit, then stops and the computer is just black (no blinking cursor).
    Any advice would be very appreciated.
    Thanks.

    What kind of an install DVD are you using for Windows?
    You can use any DVDs that are hardware specific. Only the full non-hardware soecific DVDs work on the Mac.
    Allan

  • Why is my mac book pro screen  black and the computer is on

    My mac book pro screen went blank with the computer on. I was able to open Safari by using cntrl command when I turned it on. It won't load.

    Hello there, 309Catalina.
    The following Knowledge Base article has some great recommendations for the issue you're describing:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • We just moved from the United States to Costa Rica.  The first two days my mac worked great.  Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it

    We just moved from the United States to Costa Rica.  The first two days my mac worked great.  Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again. 
    This computer was brand new in June.  Is it the humidity???   What can I do.  Please help!!!!

    No guarantess but try smc and pram resets,

  • I was updating my iPhone 5S, suddenly the screen went black and now it won't turn on. Plugged it into my computer and it said "USB Device not recognized..." HELP!!

    I just went to update my iPhone 5S as it asked me to, and it got to the point with the apple logo on the screen and the black loading bar underneath, but then the screen went black and the phone now won't turn on? I went to plug it into my computer and it said "USB Device not recognised"..
    PLEASE HELP ME! It's 1am here in england, I need to be up at 6am for work and won't be able to get up without an alarm... my only option is so stay awake!

    Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?

  • I have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it.

    i have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it. it is not a pressing matter but if it is cheep to fix then i would like to do so

    Most of us wouldn't know that here. Call your Apple Store.

  • I just bought a mac book pro - When setting up my computer it told me that there was an update on the current operating system and to install it - I did

    I just bought a mac book pro - When setting up my computer it told me that I there was updates to my operating sytem - to install the updates. I installed them and then restarted my computer - But it still says that I have an update to do - which is the operating sytem one that I just did??? Do I still need to do something else.

    bschau1963,
    sometimes updates have other updates as prerequisites, so one set of updates can lead to another set of updates. Unless it is asking you to apply the same update over and over again, you should probably accept the new set of updates that Software Update is offering.

  • My mac book pro screen has gone white and won't close down - any tips ?

    Can someone help my screen on Mac book pro has gone white and I can,t turn off or close down

    Hold the power button down for 10+ seconds.
    Ciao.

  • The screen on my Mac Book Pro has gone black. It has a cursor that responds to touch pad, but black screen won't go away

    The screen on my Mac Book Pro has gone black. It has a cursor that responds to touchpad, but is otherwise completely black.

    Blank (lighted, but black) screen with cursor at bootup
    [SOLVED] - Macbook Air Sleep/Wake problem
    Dark screen on start-up can only see curser

Maybe you are looking for

  • Question about using a shared file

    Please feel free to jerk my chain to the right fire hydrant, if I'm in the wrong spot for this question? Supposing I want to "share" an excel file located on my server with a work group, and I want to "Admin" cells (add a number, in order to perform

  • Issue while uploading data from flatfile to Transaction(VK13).

    Hi All, I am facing an issue while uploading the data from flatfile to the transaction(vk13). My flat file is as shown below. SalesOrganization    DistributionChannel    Customer    Material    Releasestatus    Amount    Currency    Quantity    UOM  

  • How do I get the Document ID for a BW Object?

    I'm trying to get the Logical and/or Physical Document numbers for BW_LO_META and BW_PH_META.

  • Can't screen capture popup windows in Flex web-based application

    Hi all, I'm a tech writer looking for a tool that will capture single popup windows of a flex-based web application (perl popups have the same issue). Snagit (and all the freeware I've tried), doesn't recognize the popup window as a selectable elemen

  • Advantages to using external HD?

    Hi, I am having some difficulties sometimes with "Disk too slow" errors in Logic Express 9.  Some folks have suggested to use an external HD.  With the speed of Firewire and USB 2.0 compared to a HD, what are the advantages or disadvantages in using