Mac Book Pro Startup Issue

Well I just sent my mbp into Apple to fix an overheating/noise problem, and good ole Apple send it back to me dead. When the battery is in, with no A/C power, it will not respond at all. With the A/C power plugged in, it will get to the grey apple screen then instantly power down. The battery is charged and I went through all the suggested steps including resetting the PMU. I dont know what else to try, any suggestions?

The ten first steps i walked through for this problem are listed here: http://docs.info.apple.com/article.html?artnum=303234
After I went through all those with no sucess, I tried the hardware test, but the immediate shutdown happens before I can boot from the C.D. So I cant get a hardware test result.
As for just sending it in again, ive already been out a computer for a week, and if I sent it in it will definatley be another week until I see it again. And now im not even sure if I am guarenteed a working computer when it is sent back, so im pretty hesitant.
Thanks again for any insight you can give me on this, the effort is very much appreciated!

Similar Messages

Need major advice-Iphone,Ipad,Mac Book Pro syncing issues

I just purchased Mac Book Pro this weekend and I also have Iphone 4S and Ipad 1..all now with latest software update. I used a hard drive to save my music and photos from my old PC and imported them into Itunes on new Mac....when I sync Iphone it will not transfer any photos or apps that I originally had on my old computer or any new apps that I have downloaded since the purchase of the new computer. Itunes begins to sync, goes through some of the processes then cancels the sync. This is very disappointing being that I bought the Mac Book to have simple and seamless syncing between IPhone, Ipad 1 and Mac.
In addition, when I downloaded the new software to my Ipad 1, it did a hard reset and I lost every app on my Ipad. Someone please help me get these devices working in harmony!!!!!! I'm desperate and pulling my hair out......Thank you in advance!!!

Morning Frederic SALA,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
Hope this helps,
Mario

Help needed on Mac Book pro boot issue.

2015-04-13 20:20:31 +0530: Starting repair tool:
2015-04-13 20:20:31 +0530: Checking prerequisites
2015-04-13 20:20:31 +0530: Checking the partition list
2015-04-13 20:20:31 +0530: Adjusting partition map to fit whole disk as required
2015-04-13 20:20:31 +0530: Checking for an EFI system partition
2015-04-13 20:20:31 +0530: Checking the EFI system partition’s size
2015-04-13 20:20:31 +0530: Setting the EFI system partition’s size
2015-04-13 20:20:31 +0530: Creating a new EFI system partition
2015-04-13 20:20:31 +0530: Problems were encountered during repair of the partition map
2015-04-13 20:20:31 +0530: Error: Couldn’t repair the partition map because a new EFI system partition couldn’t be created.2015-04-13 20:20:32 +0530:
2015-04-13 20:20:32 +0530: : Couldn’t repair the partition map because a new EFI system partition couldn’t be created.
2015-04-13 20:20:32 +0530:
On my macbook pro, was running on Yosemite and suddenly on starting the system I see "prohibited" sign. After trying a lot of combination of keys, I added external SSD and booted but it came up with Lion version.

Greetings skewat,
Welcome to the Apple Support Communities!
I understand that your Mac is booting to a prohibitory sign. In this situation, to help resolve the issue, I would suggest reading over and working through the information in the attached article.
Mac OS X: Gray screen appears during startup - Apple Support
Cheers,
Joe

Mac book pro - general issues i'm having

I swear since i bought my macbook pro 9 months ago there has been nothing but trouble with it. The longer i have it the more that seems to go wrong. Now i have a few issues and were wondering if these were normal or not really.
The first issue i have is with the touch pad button. Over time it feels as if it has become slightly raised to one side since i tend to use the left side of it to click down on and my right hand to maneuver the track pad. Anyway basically the right side has now become raised up and makes a horrible clicking noise whenever its used and has to be pressed down with alot of pressure.
Another issue i've had is the heat of my laptop. I know they get hot on your legs which isn't the issue. I'm more worried if it's healthy for it to be so hot. Using a widget i have i can check the temp of certain parts, some parts get up to 70 degrees celcius or more =/. On a normal computer that would mean goodbye from what i know.
Atm just using safari and nothing else but coconut battery open here's the following temperatures (Degrees Celcius):
HD: 42
CPU A: 57
Airport Card: 55
Enclosure base: 36
GPU Diode: 65
GPU Heatsink: 56
Heat Sink A: 57
Heat sink B: 45
Now I'm a big multi tasker, and when i have photoshop, firefox, safari (I us them both for different tasks) and illustartor open as well as MSN and skype these can get in excess of 60 degrees C. When playing games it gets even worse, often 70+ degrees C. Now these temperatures are worrying to me. Should i be worried?
Now i also have the issue of my macbook pro being horribly sluggish. My hard drive has 60GB free. Now what possibly may be the problem is I have windows XP dual booted as well as I often use a virtual machine for MIRC (I have yet to find a decent alternate mac based client i'm happy with). Anyway what can i do to increase my performance, because i'm not very happy right now with how sluggish it gets.
Another problem is the damned chargers. I am currently on my third one. I'm worried that when my warrenty goes im going to have to keep replacing them =/. My first one basically overheated, sparked and died. Wouldnt work no more. Second one the cord had exposed wires at the base of the charger. Now has anyone else had issues with this?
Ok, and that's it for now.

What gets to 70ºC, smash_you2 ? There is nothing abnormal about CPU temps around 70ºC when the computer is working moderately hard. Core 2 Duo temps can get much higher than this. Many Dell users, for example were reporting temps closer to 100ºC for their C2D CPU's on their discussion boards recently. 70ºC is typical of working fairly hard, but far from extreme.
One thing I would be worried about from your comments, though, is the suggestion of deformation in the track pad/ button area. THis can sometimes result from a defective battery becoming deformed. THis, in turn can result in greater heat from the charging system and the battery itself. I'd be more stressed about this possibility than the temperatures that your widget is quoting. Check your battery condition using system profiler.
Running in "dual boot" mode will, of course, always diminish performance generally, as your computer won't have the same CPU and memory resources available for the primary OS that it would otherwise possess.
Cheers
Rod

BB Curve, Pocket Mac, Mac Book Pro sync issues, all of a sudden

Hi, new to the forum here, but not to Blackberry or Mac! I've been using this sync combo since it's inception back when I first got a 7100, then with my T-Mobile Curve when it came out, with little or no problems. I now, all of a sudden, have issues! I did look around at some other posts to see if I could find a solution, or someone with the same problem, but I think my prob is slightly different, so forgive me if I'm repeating some things here that others already have talked about!
After dropping my Curve over in Europe last month and cracking the screen (ugh), I got a replacement from the insurance company, which turned out to be a remanufactured phone (for the $130 deductible??? - another topic!)....... there were apps missing, and the phones' keypad did not feel right, but IT DID sync ok... at any rate, I got them to send me a NEW phone, which I just received. It has the same exact software version as the other phones I had.
I did my usual USB sync with Pocket Mac, starting just with the contacts (mac address book) and notes (stickies). I selected 'overwrite device' in the advanced prefs of pocket mac (all latest versions installed, with latest drivers as well). Worked fine, as usual.
I then added some addresses in my address book on the mac, and went to do another sync. It was at this point that the sync did not work, either in 'overwrite device' or 'two way sync'. The added addresses were not on my phone.
What I've tried, and noticed so far:
On the phone, during the 2nd sync, no matter which pref I choose, the ARROW on the connection status window on the phone is going the WRONG WAY, towards the computer icon, not the phone icon. Since I added info only on the computer, the arrow should be going toward the phone, especially when in 'overwrite device' pref. This was NOT the case on the original sync, when the phones' address book was empty; the arrow was going the right way, towards the phone. I did the 'wipe/reset' that Brodie suggested in another post, which is going to the address book on the phone->menu->options->scroll to 'default' and type in 'rset'... that wiped the address book from the phone.
I then did another sync, pref in 'overwrite device' and again it worked fine, with all my addresses, including the recent entries, transferred as they should be to my Curve...
I again made a few changes as a test, adding one address on the phone, and one in the address book on the mac, did a 'two way' sync, and again, nothing, both new entries were NOT copied.
The other thing I noticed, is the connections status window goes away after a bit of time on the phone (like it's finished), but the pocket mac software on the Mac is still spinning, acting like it's still syncing, with the status bar near the end, but it never finishes. I have to quit it manually. This did not happen on the 'clean' sync, everything finished like it was supposed to.
This obviously is a drag to not be able to sync without wiping the phones' address book, especially when data has been entered on the phone, and in fact, in that case, there is NO WAY to get it to the computer at this point!
I'm running MAC OS 10.4.11. Brand new sync cable that came in the box with the new phone.
As I said, all software and drivers having to do with pocket mac and blackberry are the latest versions just installed.
Maybe the desktop mngr for mac will solve all this, but, until then?
Thanks in advance for any help!

Hi and welcome to the forums!
KB10489 Data synchronizes from the BlackBerry device to the Macintosh computer, but not the other way.
See if this offers any help
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

New mac book pro OS issue?

I bought macbook pro 13 inches non retina model. Before buying on apple.com it mentioned tht OS is mavericks and quite a few apps free with mavericks like ilife etc. but whn i started the laptop it has 10.8.3.. Can i install free apps that comes with mavericks once i upgrade?

Welcome to Apple Support Communities
Of course, but I recommend you to accept the apps before upgrading. Open the Mac App Store, go to Purchases and accept them. If it does not let you accept them, upgrade to OS X Mavericks first and then accept them.
Before upgrading to OS X Mavericks, I would recommend you to install OS X 10.8.5 first in  > Software Update, so you can be sure the upgrade will go well.
The reason why your Mac came with OS X Mountain Lion is that it was manufactured before the OS X Mavericks release

Mac Book Pro- Spacebar Issue

got my macbook about 3 weeks ago, and while I do love it, it has an annoying issue. This issue is not deal breaking in any way and actually almost never happens unless I intentionally try and make it happen. This issue is with the spacebar. When I push the spacebar on the very leftmost bottom corner, it wont aknowledge. Like I said, almost never happens, but when typing for an extended period of time, it may occur a few times which is annoying. Is this easily fixed?? I doubt they will replace it because of such a minor default, but I also dont want to have it shipped away for that same reason. Also, is anyone else having similar issues?

thanks guys, I appreciate your input. Apple told me it would be gone for 5 days, but 3 would be ideal as I do use it regularly for graphic assignments and what not. I suppose im a little aprehensive because I've shipped similar products out before from different manufacturer's for repairs, and upon their return, they had fresh new scratches on them :S

Mac Book Pro beeping issue

when i turned on my macbook pro the screen is blank and it is beeping 3 times on and off and I can't fix? any ideas how to resolve the problem? thanks!

see
http://support.apple.com/kb/HT1547
about the beeps
It means a ram problem
Try opening the machine and resetting the Ram

Mac Book Pro 13 inch Graphics Issue with Yosemite

I have a major graphics issue with my Mac Book Pro mid 2010 after upgrading to Yosemite. I have a 2.66ghz with 8gb memory and 320M 256 MB NVIDIA graphics card. Since upgrading to Yosemite (after a clean install) I have had the following issue that are driving me crazy;
When I use more than one program my screen displays large blocks of unrecognisable fuzziness. I have two screen working off my Mac Book Pro, one is the Apple 27 inch theatre screen.
My system works slow despite have ample free memory available on my disk (over 150gb)
It is becoming an increasing concern as this issue builds up over the day to the point where I need to reboot to fix, however as soon as I use Photoshop the system almost grinds to a halt. Other issues that are bearable but ned addressing include;
Keyboard often does not work on startup and requires you to pull out the keyboard and reconnect (intermittent).
Lost email when sent (intermittent). I had hoped that this would be fixed in this updated release.
Laggy behaviour in general.
I am hoping someone has an idea to fix these issues or are also sharing my frustration. Can someone suggest fix as this is not a workable situation for Mac book Pro users and 2010 is not that of an old computer. Apple???

So you erased your drive and installed 10.10 and then 10.10.1 and everything else was t hrough Setup Assistant, through reinstalls, or through TimeMachine restore?
A four-year old laptop may be at the point where that small older gpu and processors have more trouble.
you might want to hold off and go back to Mavericks or whatever you had - hopefully you cloned that system before doing clean install, upgrade to 16GB, maybe throw in an SSD... or save and get the next MacBook Pro to come out.
And you checked your apps at http://www.roaringapps.com for compatibility.
Might help just to see what if anything shows up in output from Etrecheck.
Probably thought this was laptop MacBook Pro, it is not, probably best moved to Yosemite forum.

2007 Mac Book pro Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

My Mac Book Pro started having issues. I tried to relaod the operating system and it worked for a moment. When I tried to do a time machine back up it failed.
Now itr Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

Dr.Conga,
did you try to do a Time Machine backup from your MacBook Pro, or a Time Machine restoration to it?
Are you trying to reload your current version of OS X (10.7.4, to judge from your signature), or are you trying to reload the version of Mac OS X that came on the grey installation DVDs that originally came with your MacBook Pro?

After updating my mac book pro to the osx yosemite.am getting some issues after starting up.a soon as it gets on the destop the screen start blinkingand i cant do anything

After updating my mac book pro to the osx yosemite.am getting some issues after starting up.as soon as it gets on the destop the screen start blinking and i cant do anything.Please help me!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Desperate!! Printer issues, Can´t print, can´t scan on my Mac Book Pro.

Have issues printing and scanning from my Mac Book Pro on a Epson Stylus TX110 printer/scanner. This printer used to work fine on my old windows based laptop. However. When tried to install the software from the original disk, on my new mac, got an error message that could not recognized the application (My guess is that software was old.)
Went to EPSON support website, located the drivers for my printer, TX110_scan_3730 GM2.dmg and TX110_115_653APS_C2_GM.dmg
Downloaded them and ran the script and went through the whole process of installing, it said it finished installing both applications, but I can-t find the printing applications or run the scanner...
Desperate... need to scan and print!

You ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below. If you use any iWork applications, you may need to delete them and redownload them from the App Store.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

My older mac book pro and iMac are both running 10.6.8 and both have started running safari and email VERY slowly. My new mac book pro running 10.9 is having no issues. Is anyone else experiencing these issues?

My older mac book pro and iMac are both running 10.6.8 and both have started running safari and email VERY slowly. My new mac book pro running 10.9 is having no issues. Is anyone else experiencing these issues?

No noticeable speed differences running the four latest OSs on my machine.

Mac book pro will not turn on. I get the startup tone then the apple then the no sign then a file folder with a ? On it. Taken out battery and put back in. Any ideas ?

No startup on Mac book pro. I get a startup tone then th apple then a gray file folder with a ? On it. Any ideas?

What OS are you running?

Mac Book Pro Startup Issue

Similar Messages

Maybe you are looking for