Mac book pro still setting up after latest download of IOS

TTried to load latest IOS release Mac book pro still setting up after 23 hours

AApologise for my lack of awareness but have Office loaded on my Mac Does this make a difference
if I have in my old age committed a "**** up" how do I undo it

Similar Messages

  • Mac book pro won't start after latest osx update

    Just keeps re-booting showing progress bar. After recent java/iTunes update the Mac book pro restarted and wouldn't shut down. So I powered it down. Anybody that could tell me how to roll back to latest successful startup?
    Thanks

    Hi Jacobmitchell92,
    If you are unable to start up past a grey Apple screen after doing a software update, you may find the following articles helpful:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem.
    http://support.apple.com/kb/TS4636
    Regards,
    - Brenden

  • Mac book pro will not sleep after i installed mavericks

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

  • I just bought a mac book pro - When setting up my computer it told me that there was an update on the current operating system and to install it - I did

    I just bought a mac book pro - When setting up my computer it told me that I there was updates to my operating sytem - to install the updates. I installed them and then restarted my computer - But it still says that I have an update to do - which is the operating sytem one that I just did??? Do I still need to do something else.

    bschau1963,
    sometimes updates have other updates as prerequisites, so one set of updates can lead to another set of updates. Unless it is asking you to apply the same update over and over again, you should probably accept the new set of updates that Software Update is offering.

  • My mac book pro doesnt start up after a small flash in jack when plugged in

    my mac book pro doesnt start up after a small flash in jack when plugged in

    It's a mac book pro 17", OS X 10,5 . It worked perfectly but when I (or actually my friend) plugged the jack into the wall outlet it came a small flash (in the wall outlet) and then it didn't start up. No sound, no light on the screen. I didn't actually see what happened, but I asked if she plugged it in with the magsafe wire still attached to the computer, and she believed she might have. Is there anything to do? I have a couple of mac computers, two other mac book pro (writing on the newest one now - 13" - late 2011 - OS X Lion 10.7.5), if it could help.

  • HT201177 Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

    Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • HT1444 Hi All- I have an MA463LL/A mac book pro.  what is the latest update i can download?

    Hi All- I have an MA463LL/A mac book pro.  what is the latest update i can download?

    Hello, you can download the 10.5.8 combo update, later can be bout but not downloaded.
    Repair Permissions afterwords, reboot.
    1058 Combo Update, 10.5.8...
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    Pre-Installed MacOS:
    X 10.4.5 (8G1453)
    Maximum MacOS:
    X 10.6.8*
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57

  • My mac book pro is not booting after sleep

    My mac book pro is not booting after sleep...Pls anyone help me!!!

    Hello adibah2731,
    We've an article that proivdes a host of useful tips that can get your Mac booting up again.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Cheers,
    Allen

  • How can I play UDF disc on my mac book pro what do i need to download?

    How can i play UDF disc on my mac book pro what do I need to download?

    Do-It-Yourself Laptop Repair
    Research YouTube's 'How To' video tutorials
    FixYa

  • I have a mac book pro still running mountain lion.I haven't powered it on in a few months. now when i try to turn it on all i get is the apple logo and the progress  bar after a few mins. of trying to load my laptop just turns off.can anyone help me

    I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress  bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated  thanks

    I linked to it above, but here is another link.
    http://support.apple.com/en-us/HT201262

  • Just bought the Mac Book Pro 17" - set up all OK but the applications are only showing on a small screen size, not full screen - the background is still visible as a margin - how do I take the view to full screen corner to corner so to speak.

    Just bought the Mac Book Pro for my photography  - set up and running last night, but the user screens ie Hot Mail, safari etc.. are only half size sat on the background - I have exhausted the help and calibration log...surel this must be simple to fix...any help out there..thanks..Paul.

    Have you just moved over from WIndows?
    This is standard on Macs. The ability to see more than one window at a time. Some apps - like iPhoto, Aperture etc - have a Full Screen mode. Check out the View menu.
    Drag the lower right hand corner to resize the window.
    Regards
    TD

  • Mac book pro freezes at login after upgrade to mavericks

    Hi Peeps,
    I'm new to Apple and this is my first Mac Book Pro... I bought it Oktober last year...
    Today i wanted to upgrade to Mavericks... All went well, the mac installed... and now it is done.... The system launches until the login screen and then freezes... I've been reading about it on al possible forums... Don't know what to do and in two days i leave abroad again far away from civilization... this mac is my only connection to home and the normal world so yes..i'm a bit desperate
    I tried the cmd+R thing to reinstall the OS X - same result...
    Bit afraid to do this erase thing cause i'm not sure to do it right - cannot really afford to loose data on this pc apart from the OS.
    Stupid me i didn't make a backup with Time machine or something else... can anyone please help me out here ????
    Any advice is welcome...
    Thanks all !!
    Luc
    <Email Edited by Host>

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My Mac Book Pro wouldn't start after memory update

    I updated my 27" Imac memory up to 16 GB, so I was encouraged to do the same with my Mac Book Pro after watching the video and instructions. However My Mac Book Pro wouldn't start afterwards. It is driving me crazy. Please if someone can help me on this. Thanks

    I was trying to install Corsair 8GB (2x 4GB) 1333mhz PC3-10666 204-pin DDR3 SODIMM Laptop Memory Kit CMSO8GX3M2A1333C9; and now I realized that I made a mistake because this Mid 2010 Mac Book Pro uses 1066mhz PC3 8500 instead, so should that be the problem of compatibility? I should guess so, although in my HP Elite I have 800Mhz ddr2 where the bus works at 640 mhz ddr2.
    The rest is the same being 204 pin memory cards, etc.
    I made this mistake because ordered at the same time this memory along with memory cards for my new 27" iMac, which works at 1333Mhz.
    Thankyou again, I will check on if cards are sitting well and if they are PC3 8500 1066 Mhz....

  • Mac book Pro won't start after installing a update, Mac book Pro won't start after installing a update

    I installed a update on my Mac book pro, now when I try to start it, it'll come up with the apple logo and a loading bar below it, gets to about 1/4th and shuts down every time.

    Hi Jacobmitchell92,
    If you are unable to start up past a grey Apple screen after doing a software update, you may find the following articles helpful:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem.
    http://support.apple.com/kb/TS4636
    Regards,
    - Brenden

  • Mac Book Pro won't restart after GPU Panic

    I have a 2010 Mac Book Pro with a known issue of GPU Panics, especially following Mavericks installation.
    Have been limping along with band aid solutions until I can get a new computer, but today, following a panic, the laptop won't restart.
    I press the start button, get the usual startup sound, get gray screen with Apple logo, gray spinning pinwheel for about 2 minutes, and the screen goes totally black. Machine still seems to be on, makes quiet noise.
    Any ideas on how I can get it to restart?

    Katharine,
    since you currently have Mavericks installed, you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it reach the login screen now? (Your screen going totally black is probably due to the GPU problem.)

Maybe you are looking for

  • N97 trying to connect to the internet *wasting my ...

    I've been using this phone for atleast a month now. and i've noticed in the log my phone keeps on trying to connect to my home wi-fi, and if that isnt available it tries to connect to Vodafone AU Internet (one of the accesss points). now this costs m

  • Restoring my iPhone after backing it up

    Hi, I have backup up everything to the iCloud and resotred my phone, I saved all my apps to the cloud but after my iPhone 4S being restored only 2 apps reinstalled. I can see things on the cloud still all my apps and things but there not installed on

  • Updating Software 1.2 on 5th G ipod

    I've just downloaded itunes 7 and ipod software 1.2. I connected my ipod to the computer and it updates tracks fine. However when I try to update the ipod software all I get is an error message saying "ipod cannot be updated because it contains files

  • Gutterball Bowling Game Keeps Prompting For Update Every Week

    Hey Adobe, I am running Firefox 16 with Adobe Shockwave Player, the latest version.  About every 7 days, I get a prompt to update Shockwave Player when I play Gutterball 3D at this site: http://www.shockwave.com/contentPlay/shockwave.jsp?id=gutterbal

  • Macbook Pro Key repeat problem

    I've had my MacBook Pro for almost 2 years now but it's recently started to have keyboard repeat issues. The keys are not physically stuck but behave like they are, in a totally random manner - including the delete key and the space bar. Messages wil