Mac Book Pro update stuck on loader bar

Last night I choose to update my MacBook Pro to the latest OS. I left it running overnight. 12 hours later and its only at 50% on the progress bar of the installing software update screen and it appears to have made no progress in the last serveral hours.
What should I do? How much longer should I wait?

Press and hold down the Power button until the computer turns off. The update is frozen. Check to see if you can restart the computer.

Similar Messages

  • My mac book pro gets stuck when connected to internet

    hello.
    I recently changed  ISP and router...
    I noticed that when I connect to the wifi of my house my mac book pro gets stuck. the color spinning wheel (of death)  starts and  shows forever and I can't click anything after that. I can turn off the mac only by forcing quitting (holding down the power button).
    i checked the hard disc at disc utility and everything is ok
    when i restart and turn the air port off it doesn't get stuck...
    Please help!

    I recently changed  ISP and router...
    Do you have an apple router at all??
    If so which one?
    when i restart and turn the air port off it doesn't get stuck...
    So you are plugged into the main router by ethernet??
    Are you actually running Lion??
    If not what are you running? And if it is that all round Stinker Yosemite.. no surprises there.
    As far as the computer is concerned clear out all the old wireless names.. shut down the computer.. restart the computer and rediscover the wireless again and put in the password. Does that help??
    Old laptop and upgrade install bad news all round.

  • Mac Book Pro gets stuck

    Hello Doctors,
    This Mac Book Pro gets stuck were the apple logo and the sign of the circle. Please help, it won't turn on. It's running Snow Leopard.
    Thank you in Advance!

    Here is the specs from apple.com:
      15.4-inch: 2.0GHz (MA600LL)
                       Processor         2.0GHz Intel Core Duo        
                               Memory         512MB (single SODIMM) 667MHz DDR2 SDRAM (PC2-5300) 
                               Display         15.4-inch (diagonal), 1440 x 900 resolution, TFT widescreen                              PCI Express Graphics         ATI Mobility Radeon X1600 with 128MB of GDDR3 SDRAM and dual-link DVI        
                               Video         Built-in iSight Camera, DVI, VGA (DVI to VGA adapter included)

  • After MAc Book Pro update NO Camera on SKype

    Updated my MAc Book Pro to OS Yosemite 10.10.2 and updated skype to latest version and since then NO camera. I can see the person I call they can only see a black/gray screen although my camera on my screen is shining green.

    I have checked photo booth and that tells me my camera is off.
    The green light on my screen is working.
    I have checked the USB header on the system profiler but cannot find it in utilities.
    I ahve switched the computer off and have had it off for a longer period of time.
    All sstill no camera. It seems that everything points to that the camera is there but does not want to funtion in relataion to anything.
    What to do or try?
    As I am heading for China end of the week, it would really be great to have this skype working so I can check in with my kids whilst I am gone.
    Appreciate and am grateful fo any help that can get it to work.

  • Mac book pro update - blank screen - still going or not?

    Hi,
    I (extremely stupidly) set my Mac book pro to go ahead with about 4GB worth of system updates without backing up the machine first. It's about 1.5 hrs in, the screen has been black for the entire time but the fans are still going.
    I'm not sure what to do - leave it go and see what happens?  Is there a way to cancel it and pretend I didn't push 'go'?

    Anyone? Please, I'm stressing a bit. Probably deserve it. Silly!  Can anyone suggest if its maybe still doing its thing?

  • Mac book pro update os x 10.5.8

    Hoe kan ik mijn mac book pro 10.5.8 updaten en waarmee?

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • My Mac Book Pro froze during up load

    MY Mac Book Pro froze during loading up.
    I Use Yosemite 10.10
    This issue happened after I closed it.
    I had to restart and it froze with a screen showing my admin name,
    with choices to restart shut down and the toolbar at top all frozen
    how do I solve this problem.
    I May need remote access from support for this?
    TInTin15

    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Can you update mac book pro update photo booth

    i was at the apple store today and i was on the mac book pro and the photo booth had so manny more effects than the one i have and  just got my mac book pro this april 2011

    umm well the head line says can you update so its a question not that hard to understand

  • My Mac Book Pro is stuck on gray screen when booting up

    When booting up on my Mac Book Pro side it gets stuck on a gray screen and wont boot even when in safe mode. I have cleared the P/Ram and still have acces to the partioned windows side on the same computer. How should I procede to get my Mac OS running again.

    See if these are of any assistance:
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2889.html
    http://support.apple.com/kb/TS2570
    Ciao.

  • My Mac Book Pro starts up with gray bars and instructs me to restart the sy

    I started having problems with my Mac Book Pro last night. It crashed, and instructed me to restart the computer. I've tried the following with the install CD inside the CD ROM Drive:
    1) Restarted it with the OPTION key pressed down
    2) Restarted it with the C key pressed down
    3) Restarted it with the D key pressed down
    The extensive Hard Drive test did not detect any problems. I cannot boot from the main HD or the Install CD. I cannot enter safe mode.
    On a regular boot up the computer starts up with gray bars and the gray bars fill the screen, the spinning gear appears and more gray bars on the screen. The screen then turns black and then I get the restart message.
    Any suggestions would be appreciated.

    Like BSteely, I am curious as to how you ran hard drive tests if you can't boot from the Installer disc? Do you have another bootable hard drive attached?
    You might want to try pulling and reseating the RAM and hard drive along with performing an SMC reset. Disconnect any external USB and FireWire devices. You're getting kernel panics during startup which usually indicate a hardware issue.
    -Douggo

  • Mac book pro is stuck on installing snow leopard. won't work.

    i recently was mucking around with my mac book pro and soon found my self stcuk with the installation of the 'snow leopard mac OS X' no matter what i did it just wouldn't go away, all i wanted was for my laptop to just go back to normal and get back to what i had been doing only a few hours ago but nope nothing, not even the snow leopard would download to finish things off. so i contacted apple support whom we spent about an hour chatting with. that was basically hopeless, they were very nice but they just didn't know what they were doing, and best of all they wanted to charge me. so at the very ending when they told me that my hard drive was fried and there was absolutely nothing i could do but to get it taken to an apple store and pay for them to replace my hard drive i asked them if i should do the online repair thing, and he told me no i shouldn't its just a waste of time and it won't work.  so i neglected him told him a thank you and guess what, i got it to work. now my laptop is good as new and i didn't need to pay to get the hard drive replaced. lol. ok so for the people who are facing this oh my gosh its such a headache but we can do thins. so write these steps down and i promise they will work and you don't need to pay to get your perfectly fine hard drive replaced. ok so shut down your laptop completely. then when its completely off. hold don't the command button and R hold them both down and then at the same time press the on button keep holding them, you can take your finger off the on button but keep the others on the command and R until a white screen appears it will ask for wifi and then it will reset everything for you like when you first got your laptop. just follow through the instructions they give you and all is well. i hope this was help full for you if this happens.! (btw i can't remember if it was command and R or the option, alt button and R but just try the command one first and if that doesn't work then the other one)

    Hello roscomom,
    The following article details a number of steps that may be helpful in getting your TV working with your MacBook Pro again.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Allen

  • HT1338 MAC book Pro update

    How long will it take to install the update? Because my mac has been isntalling the update for more than an hour now, and nothing is happening.

    It all depends upon the size of the update and the type and speed of your connection..  Please supply more details if addtional information if desired.
    Ciao.

  • My mac book pro is stuck on a screen with a picture of a file

    My macbook pro powers on and goes straight to a page stuck with a file folder and a ? mark........

    That image means you need to do a restore. See Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support for more details.
    You will need a USB cable with a micro-USB connector on one end.

  • Mac Book Pro is stuck

    Hi - I see the spinning busy ball for hours now. cmd+alt+esc does not work. any idea? Thanx

    Use Software Update to update your os to at least 10.6.8 and anything else that needs to be updated.  Repair permissions and restart your computer when done.
    Troubleshoot the spinning beach ball

  • HT1338 My mac book pro is stuck in dos mod how do i turn it off?

    hello i may need to get some help geting off dos mode. please help

    Call a local person that can come and fix your issue, we can only help those who assist themselves and are a bit further experienced that your currently are at the moment.

Maybe you are looking for

  • Device Error-The Target Device Isn't Suitable For Use

    I read this in another forum after I experience this problem. Hope it helps some of you. I encountered the problem when I was exporting my finished movie. I had added a few effects like transitions and menu makers as well as stop markers to my timeli

  • How to get the function codes

    Hi , For displaying ALV on a modal dialog screen, I am using "CL_GUI_ALV_GRID" and the method is SET_TABLE_FOR_FIRST_DISPLAY. I want to exclude the complete tool bar that is appearing on the screen. For that I have an exporting parameter of the above

  • Says I don't have enough space

    I want to download Infinity blade onto my iPhone while it's 99 cents and I cleared off my phone to where it says I have 1.0 gb free in the about menu. When I go to download infinity blade from the app store it says I dont have enough space. Infinity

  • Lost volumes between raidutil and diskutil

    Suddently the Xserve (Xeon early 2008, 10.5.8) show the "?" at the boot. I've set up an other OS X Server on an external drive. None of the four volumes from the internal drives mount anymore. I assume the server has restarted after a long power fail

  • Converting all my mp3s to w

    I'm getting semi-close to filling up my zen sleek (only a few more gbs left on it), so I'm going to convert ALL my music to wmas, I think. Creative audio converter works good/fast for me, so I'm going to use that. Now, on the "Set Destination Format"