Mac book pro when turning on wheel just keeps spinning
Just did the updates requested a few days ago and now it will not complete the turn on process?? Please help
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Similar Messages
-
I just bought a mac book pro - When setting up my computer it told me that I there was updates to my operating sytem - to install the updates. I installed them and then restarted my computer - But it still says that I have an update to do - which is the operating sytem one that I just did??? Do I still need to do something else.
bschau1963,
sometimes updates have other updates as prerequisites, so one set of updates can lead to another set of updates. Unless it is asking you to apply the same update over and over again, you should probably accept the new set of updates that Software Update is offering. -
I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response
Maybe some help here:
http://support.apple.com/kb/TS1367
http://support.apple.com/kb/TS1365 -
Can an iPad 2 be synced on a MAC book Pro when an iPhone has already been synced to it?
How do I sync my iPad 2 to my MAC Book Pro when my iPhone has already been synced to it?
It seems to only recognise the iPhone.How to use multiple iPods, iPads, or iPhones with one computer
-
On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????
If you have the exact same problem - take the computer to an Apple store or an AASP. Whichever is more convenient for you. If you have AppleCare call them!
-
is it fine to charge mac book pro when its switched off, or not in use. or one always keep it open during the charging?
It is fine. It won't over charge.
-
I can't log in on my mac book pro, when I open ask for name and password
I can't log in on my mac book pro, when I open ask for name and password but it doesn't acept ...
Which OS is installed on your Mac?
-
my mac book pro got stolen and i just purchased a new one is there any way i can recover my purchased songs and movies from i tunes. I have the same account name, password and everything
Yes. Update to iTunes 10.3.1
Then go to the iTunes Store and click Purchased "new" under Music Quick Links on the right side of the iTunes window.
You can re download your purchased content from the next window. -
AOL mail not updating. Spinning wheel just keeps spinning. It hasn't updated in 5 days. G-mail updates normally. I can use the AOL web site and access it on my android phone too, but not on my MacBook Pro. OS 10.6.8
Hello robe427,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you are unable to receive email from one of your accounts, please follow the steps in the article linked to below.
Mac Basics: Use Mail on your Mac
Take care,
Alex H. -
My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Setting>:General>Reset>Reset Network Settings.
- iOS: Troubleshooting Wi-Fi networks and connections -
When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.
Were any of the troubleshooting steps in the article from which the question was posted tried?
-
Appleworks won't start - wheel just keeps spinning
Recently, my Appleworks app won't work. AFter I double click, it quickly shows credit screen, and then gets stuck on Starting Points screen. None of the starting points show up and the wheel just keeps spinning and spinning...I can't open any of my hundreds of docs - help!
iBook Mac OS X (10.3.9) SuperdriveYou have run into the most complained about bug in AppleWorks 6 - known as the "Recent Items bug" - & has been around since AppleWorks 6 was released in March, 2000. There are three user tips in the User Tips Library dealing with Recent Items., the first two by Dale Gillard & the third by Yvan Koenig
AppleWorks slow? Spinning ball appears?
Recent items not visible/updated
No More Recent Items -
Iphoto will not open . Wheel just keeps spinning and spinning. Cannot reboot
My IPHOTO app will not open on my computer. When I open the app the wheel just keeps spinning . If I try to upload a picture from my library to facebook it tells me I need to upgrade to IPHOTO 5 or above.but then my computer tells me there are no upgrades needed for my computer. What is the issue here ? My photos just never appear. Only the little wheel spinning
what version of iphoto do have? Of the OS?
If iPhoto will not quit you can force quit - Apple menu ==> force quit
You can try to Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
LN -
Why is my brand new mac book pro's fan running i just turned it on
I just turned on my new mac book pro. battery was dead so plugged it in and the fan or something is constantly running. its very noisy is this normal?
Reset the #1 SMC
>>Instructions to reset SMC
..Step by Step to fix your Mac -
i just got a mac book pro and it is my first mac. my friends have told me that i can have a mac boot up windows. i would like to do this with my mac book but it doesn't have a cd drive. does any one know how i can do this if it is possible.
maickem wrote:
i just got a mac book pro and it is my first mac. my friends have told me that i can have a mac boot up windows. i would like to do this with my mac book but it doesn't have a cd drive. does any one know how i can do this if it is possible.
Read and follow the Boot Camp Instructions located here: http://www.apple.com/support/bootcamp/
The Boot Camp Community is located here: Boot Camp
Maybe you are looking for
-
Over the last two days, after opening any document in A R XI, as soon as the cursor nears the drop-down menus, another unwanted copy of the original document opens on top (but slightly offset from) that completely obscures the menu options. The origi
-
Import cert in Cisco 7921 with error "certificate verification failed"
Hi everyone I am trying to install a digit cert on a 7921 and I get the message on import of "certificate verification failed". I have tried a number of time, create CSR file then login to certificate web site and get file assigned then import it bac
-
Despite following all instructions from the Canon manual that came with my CanonSZ 280 I cannot get the WiFi function to work. Any help would be appreciated.
-
Is it possible to link in files based on a pattern?
Is it possible to automatically link in php files in the way css, js and included and required includes are linked? The image is from Dw cs5, swedish, but I think you know what I mean. This shows the desired behavior based on a bug i found in cs5. Ev
-
How do I get QT movies into iMovie 8 ?
I captured some screen video using Snapz Pro X, edited them in QT Pro. I have tried to import and drag them into iMovie 8 and have not been . What am I doing wrong?