Mac Book Pro won't wake when its been charging.

I have had this problem for some time now. When I charge my Mac Book Pro over night. The next time I use it, It won't wake up for sleep mode and I have to restart the computer. Was wondering if there has been problems with this too. If so is thier a fix for this. I'm running MacBook Pro (mid 2012) with Retina display, OS X Mavericks (10.9).

This is a BUG in Mavericks and or the Mac hardware. It goes into Standby mode after an extended period of inactivity and then Crashes when trying to come out of Standby mode completely Hanging the system and making you have to Restart it.
There is quit a long thread on this subject.

Similar Messages

  • Mac book pro won't wake from sleep after Yosemite update

    Since updating my laptop to Yosemite my MacBook hasnt woken from sleep
    i can hear it turn on but the screen and keyboard don't light up
    mac book is only 3 years old retina display

    Mike Doolin wrote:
    I think I may have found the fix for this. My MacBook Pro was dying in its sleep every time (after installing Snow Leopard), whether it went to sleep automatically or I used a Hot Corner. I went into System Preferences>Desktop & Screen Saver and changed the screen saver to Flurry, and it works now. I had had it set to a folder containing a single .pct file that I had created.
    Good advice Mike! When in doubt check the ScreenSaver settings.
    Definitely seems that it has a problem with that pic... In my case, selecting any images instead of the default setting (no screensaver) seems to have cured my non waking issue on my early Macbook Pro in Snow Leopard.
    My original problem was that no amount of trackpad input woke it, but the space bar did. The space bar seemed to wake it up with the previous Screen Saver setting. Now trackpad wakes it up (even from total sleep as well as screen saver), too. Might be nice to know about if this is an intended 'feature' as a security trick. Otherwise I consider this a bug.
    My vote is that it's a bug.

  • Mac Book Pro won't wake up from "sleep mode"

    After putting laptop to sleep last night, I wake up to a computer in "sleep mode"
    The screen is black and not responding, the sleep indicator is lit steadily (not slowly blinking as it normally does in sleep mode) but the computer does not seem to respond to anything. Screen stays black. Does anyone have same issue? I was told that the video chip is shot but I am not sure. Any advise would be appreciated. Thank you.

    An accumulation of old wireless networks you have joined can cause similar symptoms. If you can get the computer running, do System Preferences > Network and select the Airport connection, then click the "Advanced..." button. You should see a window listing all networks you've joined. Delete all except those you use on a weekly basis. Restart and try letting it sleep.
    When my Late 2007 MBP had the same symptoms as you describe, the system log showed it was try to connect to a lodge network miles away where I stayed a few weeks before. Deleting about 30 unused networks accumulated during months or travel fixed the issue, and it's not recurred, because I kno keep the list tidy.

  • My mac book pro keeps turning off, and its fully charged!?!?!

    its is fully charged!?!? and yet it keeps randomly turning off, please help me...

    Is it fully charged? What does System Information>Hardware>Power indicate?

  • My Mac book pro won't turn on at all and when i put it to charge the light blinks, what should I do?

    My Mac book pro won't turn on at all and when i put it to charge the light blinks, what should I do?

    Yes if your model MBP has a removable battery.  If it does not: 
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    http://support.apple.com/kb/HT3964

  • My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off

    My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off. It's been like this all day but I didn't notice till I turned it on.

    It's either a power adapter issue (not likely) or (more likely) a power supply problem on your MBP. Take the machine into your local Apple Store or an AASP and have them diagnose the problem.
    Good luck,
    Clinton

  • I have a mac book pro. 4yrs old. when I'm starting it, its not booting up.. no sound.. no display. just the blinker is coming on. plz help.. :(

    I have a mac book pro. 4yrs old. when I'm starting it, its not booting up.. no sound.. no display. just the blinker is coming on. plz help..

    Ok..
    Try Resetting your Mac's PRAM and NVRAM
    If that doesn't help, try Resetting the System Management Controller (SMC)
    If nothing helped, since you don't hear the startup chord, make an appointment at an Apple Apple Genius Bar or take your Mac to an Apple certified repair provider.
    v10.5.6 is an oudated version of Leopard.

  • Ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

    ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    Please describe in detail all you have attempted to do in order to resolve the issue.  Contacted Canon's tech support for instance?

  • Flashing question mark on mac book pro,with grey screen when turned on?

    flashing question mark on mac book pro,with grey screen when turned on?

    Press the power button down to force a emergency hardware shutdown and hold the option/alt key down and reboot
    If you see your OS X boot partition, then click it and the arrow, head to System Preferences > Startup Disk and reset it. Done.
    Folder with question mark issue
    If that doesn't it, then do a #2 PRAM reset and try the above again.
    ..Step by Step to fix your Mac
    If no OS X boot volume appears in Startup Manager, then OS X is corrupted.
    Try more of the Steps above (like 1-8) then if that doesn't work.
    Create a data recovery/undelete external boot drive
    Once you got your data off, erase and reinstall OS X onto the MacintoshHD partition and then restore from TimeMachine or bootable clone if you have it. or build new and return users files from the data recovery drive.
    Most commonly used backup methods
    If the drive doesn't appear in Disk Utility it might be dead  or there are further complications let us know for further assistance.
    Install/upgrade RAM or storage drive in Mac's
    My computer is not working, is my personal data lost?
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • My mac book pro won't turn on, My mac book pro won't turn on

    My mac book pro won't turn on, My mac book pro won't turn on

    Go step by step and test.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • HT201177 My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on besides the cursor. what should I do? Thanks.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

  • I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

    I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

    Maybe some help here:
    http://support.apple.com/kb/TS1367
    http://support.apple.com/kb/TS1365

  • Screen on my Mac Book Pro goes out randomly when I touching trackpad.

    The screen on my Mac Book Pro goes out randomly when I touch my trackpad.  Every time the screen shuts off, I have to restart my computer so the screen will turn on again and it's driving me nuts.
    Does anyone have any idea why this is happening and a solution?
    Thanks
    Kevin

    You can blank the monitor using those keys, that's likely what you did, it's a feature.

  • My mac book pro, deleted mi imovie, when a buy my macbook pro my imovie was in my apps, why i have tu buy and pay for that app now? i'm want my imovie back!

    My mac book pro, deleted mi imovie, when a buy my macbook pro my imovie was in my apps, why i have tu buy and pay for that app now? i'm want my imovie back!
    please!!! I HELP ME!

    I DONT UNDERSTAND why pay for imovie, because i;m pay for that when i buy the macbook pro..

Maybe you are looking for

  • Internet connection drops after 1 minute

    Using iPhone 4, version 4.3.3 - I have been using wi-fi connectivity without issue for several months at home and other public locations. Currently having issues at new work location with keeping a persistent internet connection using company wi-fi.

  • PDF Opens in parent window

    We are creating PDF Form in Adobe Live Cycle ES 8.2. These forms are rendered in an IFRAME within browser. On IE7, when we submit one form (On pressing submit button on pdf) we have save XML data in database and redirects on Form List page. When we r

  • How to use css in oracle forms

    Hello,       I am using oracle forms 11g with weblogic server 10.3.5 at windows 7.I have to use CSS in oracle forms.i have tried to search it but no profit.please some one else tell me that how can use css in oracle forms. Thnak You regards aaditya

  • How can I define the start bit in Serial Port Init VI?

    I don't know if the number of start bits of the Serial Port Init VI match with the serial communications requirements of the device I need to communicate with. Is there any way of modifying this parameter?

  • I cannot install Illustrator CS3 on my iMac

    I'm trying to install Illustrator CS3 on my new iMac. I'm using firewire to install CD-rom from my laptop onto my new iMac but there is an error as program finishes install.