Mac Book Pro wont turn on after 3 wks on no use

I last used my mac about 3 wks ago and did not shut down, just closed it with applications still open. The battery run out obviously and when I tried it this morning after connecting the power cable, it came on with all the applications open, but not responding. So I force quit all the different applications one by one, and then shut down. But when I started it up again, it would not open up - was very slow to open up my sign on page and respond to my password. So I shut down again and now I cant get past the apple log and the spinning gear, even in safe boot.
Please help.

When you press on the external battery level button, what happens?
Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

Similar Messages

  • Mac Booki Pro wont turn on, just endlessly tries to churn empty disk drive

    My 2007 November purchased Mac Book Pro now refuses to start up. Pressing the power button, on full battery and power adapter connected, causes the disk drive to give an operating noise - same as on normal startup - again and again. The machine gets stuck in this mode, disk trrying to do something until I stop it by pressing the start button long enough.
    I have tried the power management unit reset, by removing battery and adapter and pressing power button for 5 seconds. No difference.
    I have tried the forced disk eject by holding trackpad/mouse button depressed while starting up. In this mode the sound from teh disk drive is different, but the repeat continues and nothing happens.
    I have tried holding the cmd/opt/r/p buttons down on startup, makes no difference whatsoever.
    Any advice/ideas - or it it a repair service matter....
    Thanks

    When using file vault, every-time you go to restart or shut down it needs to recover disk space, which can take some time.

  • Apple Mac book pro just turns off after few seconds after turning on

    Hi Folks,
    I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
    Please help...
    Regards,
    Nadeem

    Correction:
    When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
    - MacBook does not work on batery - evenif  i disconect batery - no result
    - I try with diferent power adapter - no result.

  • Mac book pro will not sleep after i installed mavericks

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

  • My mac book pro is not booting after sleep

    My mac book pro is not booting after sleep...Pls anyone help me!!!

    Hello adibah2731,
    We've an article that proivdes a host of useful tips that can get your Mac booting up again.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Cheers,
    Allen

  • HT201177 Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

    Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • My mac book pro wont charge my iphone?

    my mac book pro wont charge my iphone?

    when did this start happening?  Do it charge when plugged into an electrical outlet?

  • I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

    I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

    Maybe some help here:
    http://support.apple.com/kb/TS1367
    http://support.apple.com/kb/TS1365

  • Mac book pro still setting up after latest download of IOS

    TTried to load latest IOS release Mac book pro still setting up after 23 hours

    AApologise for my lack of awareness but have Office loaded on my Mac Does this make a difference
    if I have in my old age committed a "**** up" how do I undo it

  • My external lcd monitor for my mac book screen wont turn on?

    my external lcd monitor for my mac book screen wont turn on, it was working fine, I came home hooked up my laptop and the screens bounced back and forth a couple time.  I got an error message saying my dashboard client had crashed, screen went black on monitor.  Now when I plug it in my laptop doesent even recognize my external mac lcd monitor. It still charges the battery,  Any suggestions????

    Hi, what still charges the battery?
    Does the Laptop's internal screen still work?

  • HT3964 my mac book pro wont start

    Hi,
    my mac book pro wont start and power adupter light is blinking
    any help pls

    Reset SMC
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.

  • My mac book pro doesnt start up after a small flash in jack when plugged in

    my mac book pro doesnt start up after a small flash in jack when plugged in

    It's a mac book pro 17", OS X 10,5 . It worked perfectly but when I (or actually my friend) plugged the jack into the wall outlet it came a small flash (in the wall outlet) and then it didn't start up. No sound, no light on the screen. I didn't actually see what happened, but I asked if she plugged it in with the magsafe wire still attached to the computer, and she believed she might have. Is there anything to do? I have a couple of mac computers, two other mac book pro (writing on the newest one now - 13" - late 2011 - OS X Lion 10.7.5), if it could help.

  • TS3173 I have mac book pro and recently bought mountain lion online i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.

    I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.

    Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.

  • My mac book pro wont boot up

    i turned my mac book pro off, and now it wont boot. i try reinstalling os but it wont let me.its showing it in the disk utilty,now it wont let me install.it says mac os x cannout startup from this disk.What do i do?

    I can't help you until you answer the questions I asked. If you want to reinstall Snow Leopard then follow these instructions:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • Mac book pro wont run apple hardware test

    Hi,
    I have several problems with my Mac book Pro. Problems started so that I couldn't sign in to my account, three other account worked quite normally. I did run disk utility to fix problems that there was. That didn´t fix account problem. Then I tried to install SnowLeopard again, but it hangs after a while.
    Hardware test programs starts and immediatelly after that computer shuts power off.
    Here is the problem from installer.log (at least I think that here is the problem) But I can not say, what causes the problem
    Jan  1 08:30:52 localhost OSInstaller[141]: Preparing previous system for upgrade
    Jan  1 08:30:52 localhost OSInstaller[141]: Recovery: Found existing archive on /Volumes/ProBook
    Jan  1 08:30:52 localhost OSInstaller[141]: Configuring volume "ProBook"
    Jan  1 08:30:52 localhost OSInstaller[141]: Preparing disk for Netbooted OS Install.
    Jan  1 08:30:52 localhost OSInstaller[141]: Volume disk0s2 mounted at /Volumes/ProBook is ready
    Jan  1 08:30:52 localhost OSInstaller[141]: Preparing disk for local booted OS Install.
    Jan  1 08:30:52 localhost OSInstaller[141]: Physical memory statistics immediately before turning on virtual memory backing store:
    Jan  1 08:30:52 localhost OSInstaller[141]: Physical Memory Allocation:   611 MB wired,   257 MB trapped,    78 MB active,  2990 MB inactive,   160 MB free,  3228 MB usable,  4096 MB total
    Jan  1 08:30:53 localhost OSInstaller[141]: Activated virtual memory backing store at mount point '/Volumes/ProBook'
    Jan  1 08:30:53 localhost OSInstaller[141]: Preparing disk for local booted install.
    Jan  1 08:30:53 localhost OSInstaller[141]: Creating installation log on volume "ProBook"
    Jan  1 08:30:53 localhost OSInstaller[141]: Reaping previous system
    Jan  1 08:30:59 localhost OSInstaller[141]: System Reaper: free space before: 263.43 GB
    Jan  1 08:30:59 localhost OSInstaller[141]: System Reaper: free space after : 263.51 GB
    Jan  1 08:30:59 localhost OSInstaller[141]: System Reaper: free space diff  : 79.6 MB
    Jan  1 08:30:59 localhost OSInstaller[141]: System Reaper: Postflight ok (256.32 GB remaining)
    Jan  1 08:30:59 localhost OSInstaller[141]: IFPKInstallElement (190 packages)
    Jan  1 08:31:01 localhost OSInstaller[141]: PackageKit: ----- Begin install -----
    Jan  1 08:31:01 localhost OSInstaller[141]: PackageKit: request=PKInstallRequest <190 packages, destination=/Volumes/ProBook>
    Jan  1 08:31:02 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:31:54 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/Essentials.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:33:26 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/BootCamp.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:33:27 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/BSD.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:34:24 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/iPodSupport.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:34:28 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/PodcastCapture.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:34:29 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/JavaTools.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:34:31 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/AdditionalEssentials.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:34:34 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/AdditionalSpeechVoices.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:34:55 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/AsianLanguagesSupport.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:34:56 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/MediaFiles.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:35:02 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/MigrationAssistant.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:35:05 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/Mail.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:35:10 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/AddressBook.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:35:11 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/iCal.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:35:14 localhost OSInstaller[141]: PackageKit: Extracting /Volumes/ProBook/Mac OS X Install Data/Automator.pkg (destination=/Volumes/ProBook/.OSInstallSandbox-tmp/Root, uid=0)
    Jan  1 08:36:42 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24/Common/DataPool.c:116: Error: finished pool without filling it
    Jan  1 08:36:42 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24/Common/commonUtils.c:315: Error: fh_pread -1
    Jan  1 08:36:42 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24/Common/StreamCompressor.c :243: Error: pread failed for /Volumes/ProBook/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/Automato r.framework/Versions/A/Resources/English.lproj/AMWhoseViewItem.nib/keyedobjects. nib: Invalid argument
    Jan  1 08:36:42 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24/Common/StreamCompressor.c :829: Error: returning errno 22 from FinishStreamCompressorQueue
    Jan  1 08:36:44 localhost OSInstaller[141]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.Automator"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c1ed700 "An error occurred while extracting files from the package “Automator.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12da123a0 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n    NSFilePath = "/Volumes/ProBook/.OSInstallSandbox-tmp/Root";\n    NSLocalizedDescription = "An error occurred while extracting files from the package \U201cAutomator.pkg\U201d.";\n    NSURL = "Automator.pkg -- file://localhost/Volumes/ProBook/Mac%20OS%20X%20Install%20Data/index.product";\ n    NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12da123a0 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n    PKInstallPackageIdentifier = "com.apple.pkg.Automator";\n}
    Jan  1 08:36:44 localhost OSInstaller[141]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c1ed700 "An error occurred while extracting files from the package “Automator.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12da123a0 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
    Jan  1 08:36:45 localhost OSInstaller[141]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    Jan  1 08:36:47 localhost OSInstaller[141]: Allowing machine sleep.
    Jan  1 08:36:48 localhost OSInstaller[141]: Memory statistics for 'Install Failed' pane:
    Jan  1 08:36:48 localhost OSInstaller[141]: Physical Memory Allocation:   572 MB wired,   258 MB trapped,   389 MB active,     1 MB inactive,  2876 MB free,  3266 MB usable,  4096 MB total
    Jan  1 09:31:19 localhost Unknown[80]: 2013-01-01 09:31:19.549 Disk Utility[173:903] **********
    Jan  1 09:31:19 localhost Unknown[80]: 2013-01-01 09:31:19.892 Disk Utility[173:903] Disk Utility started.
    Jan  1 09:31:19 localhost Unknown[80]:
    Jan  1 09:33:26 localhost Unknown[80]: 2013-01-01 09:33:26.138 Disk Utility[173:903] Verifying volume “ProBook”
    Jan  1 09:33:26 localhost Unknown[80]: 2013-01-01 09:33:26.152 Disk Utility[173:903] Starting verification tool:
    Jan  1 09:33:39 localhost Unknown[80]: 2013-01-01 09:33:39.565 Disk Utility[173:903] Performing live verification.
    Jan  1 09:33:39 localhost Unknown[80]: 2013-01-01 09:33:39.576 Disk Utility[173:903] Checking Journaled HFS Plus volume.
    Jan  1 09:33:39 localhost Unknown[80]: 2013-01-01 09:33:39.594 Disk Utility[173:903] Checking extents overflow file.
    Jan  1 09:33:39 localhost Unknown[80]: 2013-01-01 09:33:39.698 Disk Utility[173:903] Checking catalog file.
    Jan  1 09:34:23 localhost Unknown[80]: 2013-01-01 09:34:23.329 Disk Utility[173:903] Checking multi-linked files.
    Jan  1 09:34:23 localhost Unknown[80]: 2013-01-01 09:34:23.499 Disk Utility[173:903] Checking catalog hierarchy.
    Jan  1 09:34:40 localhost Unknown[80]: 2013-01-01 09:34:40.852 Disk Utility[173:903] Checking extended attributes file.
    Jan  1 09:34:53 localhost Unknown[80]: 2013-01-01 09:34:53.358 Disk Utility[173:903] Checking multi-linked directories.
    Jan  1 09:35:30 localhost Unknown[80]: 2013-01-01 09:35:30.885 Disk Utility[173:903] Checking volume bitmap.
    Jan  1 09:35:31 localhost Unknown[80]: 2013-01-01 09:35:31.346 Disk Utility[173:903] Checking volume information.
    Jan  1 09:35:32 localhost Unknown[80]: 2013-01-01 09:35:32.176 Disk Utility[173:903] The volume ProBook appears to be OK.
    Jan  1 09:35:32 localhost Unknown[80]: 2013-01-01 09:35:32.179 Disk Utility[173:903] Repair tool completed:
    Jan  1 09:35:32 localhost Unknown[80]: 2013-01-01 09:35:32.179 Disk Utility[173:903]
    Jan  1 09:35:32 localhost Unknown[80]: 2013-01-01 09:35:32.862 Disk Utility[173:903]
    Jan  1 09:35:32 localhost Unknown[80]:
    Jan  1 09:36:49 localhost Unknown[80]: 2013-01-01 09:36:49.595 Disk Utility[173:903] NSDocumentController's invocation of -[NSFileManager URLForDirectory:inDomain:appropriateForURL:create:error:] returned nil for NSAutosavedInformationDirectory. Here's the error:
    Jan  1 09:36:49 localhost Unknown[80]: Error Domain=NSCocoaErrorDomain Code=642 UserInfo=0x106d2a0e0 "You can’t save the file “Autosave Information” because the volume “Mac OS X Install DVD” is read only." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=30 "The operation couldn’t be completed. Read-only file system")
    Jan  1 09:36:49 localhost Unknown[80]:
    Jan  1 09:38:57 localhost Unknown[80]: 2013-01-01 09:38 Mac OS X Installer[141] (CarbonCore.framework) FSEventStreamStart: ERROR: FSEvents_connect() => Unknown service name (1102)
    Jan  1 09:39:39 localhost Unknown[80]: 2013-01-01 09:39 Mac OS X Installer[141] (CarbonCore.framework) FSEventStreamStart: ERROR: FSEvents_connect() => Unknown service name (1102)

    I wonder if it a permission issue?
    Maybe chmod 777 the correct files would help
    Not sure which files but you did have an error which says it cant write due to being read on. Are you the admin of the laptop and are able to mod all the files?
    I could be wrong but just an idea.
    Have you also tried to re-download the OS you are trying to install in case it is corrupt?

Maybe you are looking for

  • Driver Program

    HI I am doing smartforms.In that i need driver program for purchase order. Thanks siva

  • My ATV will not update

    My Apple TV will not update. It continues to prompt for an update and fails. What do I do?

  • HT1926 i am getting a runtime error every time I try to install itunes on Win 7 computer

    Am trying to reinstall itunes on Win 7 Home and keep getting a runtime error despite turning off antivirus, deleting old version and restarting computer as instructed.  Please help

  • Can't see Laserwriter 8500 on wireless network

    I am trying to connect a laserwriter8500 to my network without any success, I use a Macbook(10.4.9) conected wireless via Apple express to a Netgear DSL Router DG834. I also have a Brother MFP working fine, I connected the Laserwriter via ethernet ca

  • Iphone 5 - Bluetooth simply wont work

    Hi I've just traded in my trusty old Iphone 4 for an brand new Iphone 5. The Iphone 4 happily connected Bluetooth to anything I wanted it to, my headphones, my car stereo, my ipad etc etc This new 5 is showing "now discoverable" but nothing can disco