Mac book White Screen and Weird noises

Hi my Mac book pro fell off real hard and now the screen is all white and it makes this wired noise and even when I press the power button and shut it and then restart it , it's still the Same … Please help I need my photos in there and everything :(

It's rather obvious that you damaged some hardware (and what it is is anyone's guess) when your computer 'fell off real hard'.
The best thing that you can do is to take your computer to an Apple Store or an AASP and have them check it out. If your hard drive isn't damaged, it's likely that you'll be able to recover your photos.
Good luck,
Clinton

Similar Messages

My mac book pro has a white screen and won't start up

My Mac book pro has been running slow, so I thought I would shut down and reboot. It wouldn't reboot past a white screen and an apple logo. I have rebooted several times and after an hour or so it still won't go any further. Any suggestions?

Howdy Lowana42,
Welcome to Apple Support Communities.
It sounds like your MacBook Pro has a startup issue that is causing it to only display an Apple logo. Try the suggestions in the article below, they will resolve most issues like this one.
How to Troubleshoot iSight
I hope this helps,
-Jason

Hey so i've a prob my mac book pro screen is white screen and the loading sign and it never boots up so is there any way i can back it up on windows 7 before i restore/or find a fix

hey so i've a prob my mac book pro screen is white screen and the loading sign and it never boots up so is there any way i can back it up on windows 7 before i restore/or find a fix.
thx,
brandon2000

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

Each time I open FCPX my mac book pro freeze and I get a blue screen , I am running FCPX 10.08. I experienced that problem since I downloaded some plugins from Noise Industries . Can somebody help me please ?

Each time I open FCPX my mac book pro freeze and I get a blue screen and my mac book is completely frozen...

Have you removed those plugins ? They could be in your Movie folder or Library - application support - FCP- plugins - effects

My Mac book pro screen has a constant white mark on it.

Hi,
My Mac book pro screen has a constant white mark on it, i have no idea why, its like its inside the screen, its never been dropped or had anything fall on it and the mark is starting to get bigger. Has anyone else had the same problem? i've inserted a pic of it, hopefully you can make it out.
Thank You

I see a multitude of white marks on your display. Your best option is to make an appointment at an Apple store genius bar and have the technicians examine the MBP. Hardware problems such as this cannot be solved via these forums.
Ciao.

This is my first mac, it is a macbook pro. i restarted it but when it started back up i saw a white screen and then it prompted me to insert the reboot disk. anyone else have this problem?

I recently bought a Macbook Pro, this is my first Mac. I restarted it, but when it started back there was a plain white screen and then it prompted me to insert the reboot disk. Has anyone else had this problem and is there a way to do this manually like with PC's?

The new Mac's came with OS X Lion 10.7 and there are no boot disks.
Since it's so new, take it back to the Apple Store and let them deal with it.
If not you can hold Command and r (as in rotten) keys down and boot the computer.
You'll be presented with a several options, including one to reinstall OS X Lion provided you have a Apple ID, which means you have to use Safari in there to set one up. To do that you need to set up a email account with Google or Yahoo. Once you get the ID, then you can download Lion and reinstall it.
It's so stupid not having a copy of the OS on hand to perform your own repairs.
Of course Apple will be happy to sell you a $69 Lion USB stick.
Like I said, take it back to the store, and try to get your money back, that will force them to think about just giving you a replacement machine that works.
Lion doesn't work really but it can be acceptable until the patches get released.

I have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it.

i have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it. it is not a pressing matter but if it is cheep to fix then i would like to do so

Most of us wouldn't know that here. Call your Apple Store.

My new mac mini (3 month) didn't start up,all that appeared was a white screen and a flashing folder with a question mark inside it.

My new Mac mini (3 month) didn't start up, all that appeared was a white screen and a flashing folder with a question mark inside it.
I followed by recommendations from 'Everything Mac': "shut it down by pressing and holding the power button for about 5 seconds.
Then hold down the Option key and press the power button again to start up the Mac mini. Keep holding down the Option key until
the Mac mini starts up."
But I got a Wi-Fi button only to chose and connect the local network. I connected to my network and I can't use this connection
becouse no icons.
Could you please help me?

Your Mini (running 10.6.4) should have come with grey-colored install disks. Now is the time to put them into service. Turn on your computer so that there is power to accept disk #1 into the optical drive. Once the disk is in the drive, shut off the computer by holding the start button down until it powers off. Then turn it on this time holding down the "C" key to make the computer boot from the disk. The question mark that you saw indicates that the computer cannot find a bootable volume. This can happen due to corrupted system files or an improper shutdown etc. Once you are in the "Installer" you can choose Disk Utility from the Utilities Menu in the menu bar. Use it to repair the disk and to see if that can solve your trouble.

When i active my mac pro all i get is a white screen and it loading .. and when it fully loaded it turns off and the same thing keep on happening again

when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours

Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you!

Mac Pro display flickers with a white screen and then display closes

Hi,
The display on my Mac Pro started showing a white screen and flickering.
So I tried formating and re-installing 10.4.10. I am able to complete the installation of first DVD without flickering. But when after the restart after installation using first DVD then the flickering resumes.
Any idea what is the issue and how we can solve this issue.
The AHT test shows this code 4 SNS/1/40000001:ICAC. According to
http://support.apple.com/kb/TS2081?viewlocale=en_US the code should have a trailing number - but my report does not have any number. Is this error code fine? If no, can some one tell me what is the error in the system?
Thanks,
Ed
Message was edited by: esg123

Same symptoms here. We tried AHT on a good Mac Pro with the video card from the bad mac, and got the 4 SNS/1/40000001:ICAC error. Looks like a bad video card.
Here's another thread discussing the problem: http://discussions.info.apple.com/thread.jspa?threadID=2071334
Dave

HT1199 my MAC has white screen with folder and question mark anyone have the same issue?

My mac has a white screen and a file folder with a question mark...anyone else have this issue before?

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(79884)

When I power up my mac, I see the white screen and the apple icon. After a few seconds of powering up the screen goes dark. Yet I still can the mouse arrow but nothing else.

When I power up my Imac, I see the white screen and the apple icon. After a few seconds the screen goes dark. I am able to still see the mouse arrow as I move it around. But nothing else. What is the problem and how do I recover?

Try this from another user:
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).

Why is my mac book pro screen black and the computer is on

My mac book pro screen went blank with the computer on. I was able to open Safari by using cntrl command when I turned it on. It won't load.

Hello there, 309Catalina.
The following Knowledge Base article has some great recommendations for the issue you're describing:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My iMac goes to the white screen and stops

My mac was acting really poorly, I thought for sure I had a virus or spy ware and I inserted my reinstall disk and double clicked the restore icon. My screen gave me a question to restart and reinstall the OS X system. I clicked the OK button. The computer restarted came up to the white screen and now is frozen there. I have tried restarting several times with the same result. Is my mac now toast or what.

Josh Mellicker wrote:
Does the white screen have a series of small multicolored color "chips" on it? And is there a band at the bottom that is half "noise"?
michaelfromutah wrote:
...I inserted my reinstall disk and double clicked the restore icon...
What "restore icon"?
If you have the Mac OS X install disc in the drive, switch on your Mac, and hold the Option (⌥) key.
You will see a grey screen, with Macintosh HD & after a few seconds, a CD with Mac OS X Install DVD.
Click on the DVD and then the arrow underneath it. This will start up the Mac OS X installer.
From here, you need to choose your language and then from the Utilities menu, choose Disk Utility.
Then choose Macintosh HD from the left, and choose "Verify Disk" not permissions
Let us know how you go.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G.

Mac book White Screen and Weird noises

Similar Messages

Maybe you are looking for