Mac boot up error "No HPETs available... CPU(s) configured incorrectly \n"@/SourceCache/AppleIntelCPUPowerManagement/AppleIntelCPUPowerManagement - 167/pmThread.c:156

I was on my Mac and it freezed i wasn't able to restart through the Mac interface so I turned it of by the power button. When I tried to turn it on again I got to the loading screen and the loading circle span continuously around and around . I tried restarting and leaving it to work but nothing seemed to fix it, I couldn't log on. So I tried a safe boot and I received the following error
"No HPETs available... CPU(s) configured incorrectly \n"@/SourceCache/AppleIntelCPUPowerManagement/AppleIntelCPUPowerManagement - 167/pmThread.c:156
It told me to restart . I did as it told me and nothing happened .
Any ideas.
Ps i am using a Mac book pro 13 inch version 8
Please help
Thanks in advance

Back up all data, if you haven't already done so.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
If you still have panics after reinstalling, make a "Genius" appointment at an Apple Store to have the machine tested. Unfortunately, you may have to leave it there for several days.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the OS X 10.7 or later recovery partition, if present.
*An SSD doesn't need to be zeroed.

Similar Messages

  • Restart/ "mac-boot" error message

    HI!
    I was working in photoshop and my screen grayed out. An error message came up saying to retart computer. I restarted and a coded screen came up saying to type in "mac-boot" or "shutdown" so I typed mac-boot. Then the apple screen came up with the timer/clock. The fan started up very loudly and the apple screen continues without a bootup. Please help. Any information would be helpful.
    Thanks!

    You also want to look at WHY you got to a kernel panic. There are some FAQs on the subject.
    Make sure you have a UPS.
    Run Apple Hardware Test.
    Along with SMU/PMU reset, you might want to just try resetting nvram.
    Test your memory. It may be developing errors. You were using your system heavily.
    Somehow, the system went into Open Firmware screen, which would suggest a corrupt nvram, and I would be careful that the directory was not updated due to a freeze, and you need to seriously do some repairs and maintenance, and see if any files are corrupt - whatever you were working with definitely.
    Message was edited by: The hatter

  • HT4061 I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

    I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?  Does a totally dead battery have that effect?  I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
    Please help, thanks in advance all1

    Hi eggroll77,
    Welcome to Apple Support Communities.
    That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
    iOS: Restore errors 4005, 4013, and 4014
    I hope this helps.
    -Jason

  • Boot drive error message

    Following a near disaster after installing security update 2005-009 i have 2 problems ( or maybe only 1)
    When i do a verify on my boot drive i get the message from disk utility, INCORRECT NUMBER OF THREAD RECORDS, volume needs repair but it cannot fix it.
    Any suggestions.
    Second after I managed to get my boot drive running again following many kernel panics I now have a folder called damaged files, can I discard this as it seems to mirror my HD

    Hi, Paul and Allan, et.al —
    Paul — Fwiw, I agree with Allan about your apparent options.
    When you launched Disk Utility from your Install Disc as part of running Disk First Aid, did you notice the S.M.A.R.T. status of your HD?
    Before saying another word — have you tried to access and save any data that may not have been included in your last backup? Using FireWire Target Disk Mode from another (or borrowed) Mac might be a means to accomplish this...
    I'm not familiar with the specific "incorrect number of thread records" error message you received — so everything below should be considered conjectural or based on the perspective of the references cited. Each file and folder (directory) in an HFS+ file system must have a unique thread record. Apple describes the technical details in technical note TN1150: HFS+ Volume Format and the File Manager Reference. On a more layperson's level — paraphrasing and quoting from this source and its linked refs. — on an HFS+ formatted volume, a Catalog file contains records for all the files and directories stored in the volume. File thread records and directory thread records are two of four types of records contained in the catalog file. A file thread record stores just the name of the file and the Catalog Node ID (CNID) of its parent directory; similarly, a directory thread record stores its name and the CNID of its parent directory. The other two records are file records and directory records that "store a variety of metadata — including CNID, size, time-stamps, the first file extents of the data and resource forks, and pointers to the file's first data and resource extent records in the Extent Overflow File."
    My point in considering this is that an incorrect number of thread records suggests that the catalog file can't do its job properly in helping you to access your files and directories. As Allan concluded, this sounds like a potentially significant disk directory problem. Although the terminology differs, a MicroMat (makers of TechTool) tech addresses a TechTool "file thread mismatch (-92) error" message in this MacFixIt forum thread. Several users report their experiences. If the Disk Utility "incorrect number" and TechTool "thread mismatch" messages are comparable... the MicroMat tech's comment that "Unfortunately, the file thread mismatch is an uncommon disk directory error, and it is not possible to know whether the ultimate cause is software or hardware" may be relevant.
    I hope that you follow Allan's advice — and that DiskWarrior 3.0.3, TechTool Pro 4.0.6, or ProSoft's DriveGenius 1.1.5 is able to repair the problem — or that you're in a position to perform an Erase & Install. Please keep us apprised of your progress, so others may learn from your experience.
    Good luck!
    Dean

  • Creative Cloud not installing on my mac. it says (Error code: A12E5)

    Creative Cloud not installing on my mac. it says (Error code: A12E5). What do I do?

    Hi luelalamirew,
    Welcome to the Community!
    A12E5 is a download error. Please follow the mentioned steps:
    Mac:
    Navigate to Library/Application Support/Adobe/OOBE and rename to OOBE.old .
    Navigate to Applications/Utilities and trash Application Manager and Creative Cloud desktop folder.
    Download and install CC desktop again. If still the issue persists then restart Mac in safe boot and try installing again: http://helpx.adobe.com/x-productkb/global/start-safe-boot-mode-mac.htm l .
    Cheers!
    Ankit

  • HT4818 I have installed bootcamp that worked properly.  Then I have partitioned the OS X 10.8.2 and installed another OS X 10.8.2 and I have got two MAC boot options and Bootcamp disappeared from the Option menu. How can I boot Windows again and keep both

    I have installed bootcamp by the bootcamp assistant and worked properly.
     Then I have partitioned the OS X 10.8.2 and installed another Mountain Lion System and I have got two MAC boot options and Bootcamp disappeared from the Option menu. However, Bootcamp still remained in the Startup Disk in the System Preferences. When I tried to boot Bootcamp using the Startup Disk it did not boot and received a message that there is no bootable device. I have not lost any data and can read Bootcamp partition from both OS X systems. Please advise how can I boot Windows / Bootcamp again? Thank you. 

    Recommendation 1: Use a VM for this. It's essentially a giant C.F. to do this with native booting, and is potentially fragile.
    But if you're going to ignore that and do this anyway, realizing that it can break anytime in particular with OS upgrades, and that it's very difficult to impossible to resize the three volumes once you've installed the systems:
    1. create three partitions, setting each to be the size for OS X copy 1, copy 2, and Windows respectively. The Windows partition needs to be set to MS-DOS format (actually FAT32) which later in the Windows installer you'll reformat as NTFS. Do not use Boot Camp Assistant to resize/partition the disk, it simply won't work for this use case.
    2. install OS X copy 1
    3. install OS X copy 3
    4. Use gdisk (available at sourceforge) which is a command line only application, to create a new hybrid MBR adding only the last partition (Windows) to the hybrid MBR and setting it to be bootable. As a concequence you will not be able to see/share either OS X volume from within Windows. The Windows NTFS volume will be visible from within OS X.
    5. Install Windows to the only partition its installer should see (confirm size), you'll need to format it NTFS first, and I suggest using the fast format option if available.

  • [SOLVED] Can't boot from LUKS - No key available with this passphrase

    The problem
    Latest kbd package responsible for your keyboard layout may break some LUKS installs depending on the password used, as there are some keymaps which are broken, resulting in the user not being able to enter the password correctly.
    Relevant bug report: https://bugs.archlinux.org/task/36689
    The fix
    Find an old live image with the old kbd package (I had success with 2012.11.01)
    Boot the image
    Change to your preferred keymap using
    loadkeys
    Open your encrypted device with
    cryptsetup luksOpen /path/to/device devicename
    Mount the device and any other relevant mount points (such as /boot) and perform a chroot with
    arch-chroot
    Revert the kbd package. The latest working version is 1.15.5-4. If you didn't clean your cache, you should have a working version under
    /var/cache/pacman/pkg
    If not, either try finding the package manually, or build it using ABS.
    Once the package is installed, confirm the keymap works by running loadkeys again and entering any keys that may have been problematic.
    While still under chroot, rebuild the initramfs with
    mkinitcpio -p linux
    If this goes without any problems, you should be able to reboot to a working system.
    Ever since I updated my system about a week ago, I cannot boot it anymore.
    The root filesystem encrypted and since the update, I can't unlock it on boot anymore. Typing in my passphrase, I get the error No key available with this passphrase.
    One thing that comes to mind is that the passphrase contains non-standard characters (Š for example), and I'm not sure if that's what might be causing problems?
    Any ideas or tips on how can I debug this?
    Another thing I've noticed is that if I drop into a recovery shell, the special characters on my keyboard aren't properly mapped. Š will print out C and it's hexdump seems invalid.
    Edit:
    Just noticed this thread: https://bbs.archlinux.org/viewtopic.php?id=148562
    Will try to unlock it from a live distro. It doesn't seem to want to unlock with Arch live as the keymap seems wrong there as well.
    Last edited by Mr. Pjer (2013-09-07 00:19:27)

    Here's the list. The update was done on 31/8.
    [2013-08-31 18:14] [PACMAN] Running 'pacman -Syu'
    [2013-08-31 18:14] [PACMAN] synchronizing package lists
    [2013-08-31 18:14] [PACMAN] starting full system upgrade
    [2013-08-31 18:34] [PACMAN] removed python2-distribute (0.6.45-1)
    [2013-08-31 18:34] [PACMAN] removed python-distribute (0.6.45-1)
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 5 trust: 0-, 0q, 0n, 0m, 0f, 1u
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 5 signed: 65 trust: 0-, 0q, 0n, 5m, 0f, 0u
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 65 signed: 3 trust: 65-, 0q, 0n, 0m, 0f, 0u
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2014-01-22
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Importing owner trust values...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Updating trust database...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2014-01-22
    [2013-08-31 18:34] [PACMAN] upgraded archlinux-keyring (20130525-2 -> 20130818-1)
    [2013-08-31 18:34] [ALPM-SCRIPTLET]
    [2013-08-31 18:34] [ALPM-SCRIPTLET] NOTE for argyllcms:
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ----
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> The documentaion is only available as html!
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> You will find it in /usr/share/argyllcms/doc
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Color charts located in /usr/share/argyllcms/ref
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Since release 1.5.0 ColorHug support is enabled by default. The environment variable "ENABLE_COLORHUG" is not longer needed!
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Please add your argyllcms user to plugdev group! <==
    [2013-08-31 18:34] [PACMAN] upgraded argyllcms (1.5.1-2 -> 1.6.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded linux-api-headers (3.8.4-1 -> 3.10.6-1)
    [2013-08-31 18:34] [ALPM-SCRIPTLET] Generating locales...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] en_US.UTF-8... done
    [2013-08-31 18:34] [ALPM-SCRIPTLET] hr_HR.UTF-8... done
    [2013-08-31 18:34] [ALPM-SCRIPTLET] Generation complete.
    [2013-08-31 18:34] [PACMAN] upgraded glibc (2.17-6 -> 2.18-3)
    [2013-08-31 18:34] [PACMAN] upgraded bash (4.2.045-4 -> 4.2.045-5)
    [2013-08-31 18:34] [PACMAN] upgraded binutils (2.23.2-2 -> 2.23.2-3)
    [2013-08-31 18:34] [PACMAN] upgraded boost-libs (1.54.0-2 -> 1.54.0-3)
    [2013-08-31 18:34] [PACMAN] upgraded ca-certificates-java (20121112+nmu2-2 -> 20130815-1)
    [2013-08-31 18:34] [PACMAN] upgraded glib2 (2.36.3-3 -> 2.36.4-1)
    [2013-08-31 18:34] [PACMAN] upgraded wayland (1.2.0-1 -> 1.2.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded gcc-libs (4.8.1-2 -> 4.8.1-3)
    [2013-08-31 18:34] [PACMAN] installed elfutils (0.155-1)
    [2013-08-31 18:34] [PACMAN] installed llvm-libs (3.3-1)
    [2013-08-31 18:34] [PACMAN] upgraded mesa (9.1.6-1 -> 9.2.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded mesa-libgl (9.1.6-1 -> 9.2.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded cairo (1.12.14-4 -> 1.12.16-1)
    [2013-08-31 18:34] [PACMAN] upgraded ttf-dejavu (2.33-4 -> 2.34-1)
    [2013-08-31 18:34] [PACMAN] upgraded chromium (28.0.1500.95-1 -> 29.0.1547.62-1)
    [2013-08-31 18:34] [PACMAN] upgraded curl (7.31.0-1 -> 7.32.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded libarchive (3.1.2-1 -> 3.1.2-2)
    [2013-08-31 18:34] [PACMAN] upgraded cmake (2.8.11.2-1 -> 2.8.11.2-2)
    [2013-08-31 18:34] [PACMAN] upgraded cpupower (3.10-1 -> 3.10-2)
    [2013-08-31 18:34] [PACMAN] upgraded device-mapper (2.02.98-4 -> 2.02.100-1)
    [2013-08-31 18:34] [PACMAN] upgraded cryptsetup (1.6.1-2 -> 1.6.2-1)
    [2013-08-31 18:34] [PACMAN] upgraded poppler (0.24.0-1 -> 0.24.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded cups-filters (1.0.35-4 -> 1.0.37-1)
    [2013-08-31 18:34] [PACMAN] installed python2-setuptools (1.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded deluge (1.3.6-1 -> 1.3.6-3)
    [2013-08-31 18:34] [PACMAN] upgraded dhcpcd (6.0.4-1 -> 6.0.5-1)
    [2013-08-31 18:34] [PACMAN] upgraded python2-numpy (1.7.1-1 -> 1.7.1-2)
    [2013-08-31 18:34] [PACMAN] upgraded dispcalgui (1.2.7.0-1 -> 1.2.7.0-2)
    [2013-08-31 18:34] [PACMAN] upgraded ffmpeg (1:2.0-2 -> 1:2.0.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded gtk3 (3.8.2-1 -> 3.8.4-1)
    [2013-08-31 18:34] [PACMAN] upgraded file-roller (3.8.3-1 -> 3.8.4-1)
    [2013-08-31 18:34] [PACMAN] upgraded gcc (4.8.1-2 -> 4.8.1-3)
    [2013-08-31 18:34] [PACMAN] upgraded gettext (0.18.3-1 -> 0.18.3.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded libtiff (4.0.3-2 -> 4.0.3-3)
    [2013-08-31 18:34] [PACMAN] upgraded ghostscript (9.07-2 -> 9.09-1)
    [2013-08-31 18:34] [PACMAN] upgraded librsvg (2.37.0-2 -> 1:2.37.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded libmng (1.0.10-4 -> 2.0.2-2)
    [2013-08-31 18:34] [PACMAN] upgraded gimp (2.8.6-1 -> 2.8.6-2)
    [2013-08-31 18:34] [PACMAN] upgraded perl (5.18.0-1 -> 5.18.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded perl-error (0.17020-1 -> 0.17021-1)
    [2013-08-31 18:34] [PACMAN] upgraded git (1.8.3.4-1 -> 1.8.4-1)
    [2013-08-31 18:34] [PACMAN] upgraded glew (1.10.0-1 -> 1.10.0-2)
    [2013-08-31 18:34] [PACMAN] upgraded glfw (3.0.1-2 -> 3.0.2-1)
    [2013-08-31 18:34] [PACMAN] upgraded glm (0.9.4.4-1 -> 0.9.4.5-1)
    [2013-08-31 18:34] [PACMAN] upgraded gnupg (2.0.20-2 -> 2.0.21-1)
    [2013-08-31 18:34] [PACMAN] upgraded gpgme (1.4.2-2 -> 1.4.3-1)
    [2013-08-31 18:35] [PACMAN] upgraded grails (2.2.3-1 -> 2.2.4-1)
    [2013-08-31 18:35] [PACMAN] upgraded groff (1.22.2-3 -> 1.22.2-5)
    [2013-08-31 18:35] [PACMAN] upgraded gstreamer (1.0.9-1 -> 1.0.10-1)
    [2013-08-31 18:35] [PACMAN] upgraded gst-plugins-base-libs (1.0.9-1 -> 1.0.10-1)
    [2013-08-31 18:35] [PACMAN] upgraded imagemagick (6.8.6.4-1 -> 6.8.6.9-1)
    [2013-08-31 18:35] [PACMAN] upgraded intel-dri (9.1.6-1 -> 9.2.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded iputils (20121221-2 -> 20121221-3)
    [2013-08-31 18:35] [PACMAN] upgraded isl (0.12-1 -> 0.12.1-1)
    [2013-08-31 18:35] [PACMAN] upgraded kbd (1.15.5-4 -> 2.0.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded kdelibs (4.10.5-2 -> 4.11.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded kmod (14-1 -> 15-1)
    [2013-08-31 18:35] [PACMAN] upgraded lib32-glibc (2.17-5 -> 2.18-3)
    [2013-08-31 18:35] [PACMAN] upgraded lib32-gcc-libs (4.8.1-2 -> 4.8.1-3)
    [2013-08-31 18:35] [PACMAN] upgraded libbsd (0.5.2-2 -> 0.6.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded libfm (1.1.1-1 -> 1.1.2-1)
    [2013-08-31 18:35] [PACMAN] upgraded libgdiplus (2.10.9-1 -> 2.10.9-2)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-en-GB (4.0.4-1 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-common (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-base (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-calc (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-draw (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-gnome (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-impress (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-kde4 (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-math (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-postgresql-connector (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-sdk (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-sdk-doc (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libwpd (0.9.6-1 -> 0.9.9-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-writer (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libsamplerate (0.1.8-1 -> 0.1.8-2)
    [2013-08-31 18:35] [PACMAN] upgraded libwbclient (4.0.8-1 -> 4.0.9-1)
    [2013-08-31 18:35] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-08-31 18:35] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-08-31 18:35] [PACMAN] upgraded linux (3.10.5-1 -> 3.10.10-1)
    [2013-08-31 18:35] [PACMAN] upgraded linux-headers (3.10.5-1 -> 3.10.10-1)
    [2013-08-31 18:35] [PACMAN] upgraded logrotate (3.8.5-1 -> 3.8.6-1)
    [2013-08-31 18:35] [ALPM] warning: /etc/lvm/lvm.conf installed as /etc/lvm/lvm.conf.pacnew
    [2013-08-31 18:35] [PACMAN] upgraded lvm2 (2.02.98-4 -> 2.02.100-1)
    [2013-08-31 18:35] [PACMAN] upgraded maven (3.0.5-1 -> 3.1.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded net-snmp (5.7.2-7 -> 5.7.2-8)
    [2013-08-31 18:36] [PACMAN] upgraded nodejs (0.10.15-1 -> 0.10.17-1)
    [2013-08-31 18:36] [PACMAN] upgraded obex-data-server (0.4.6-7 -> 0.4.6-8)
    [2013-08-31 18:36] [PACMAN] upgraded openresolv (3.5.5-1 -> 3.5.6-1)
    [2013-08-31 18:36] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2013-08-31 18:36] [PACMAN] upgraded pacman-mirrorlist (20130626-1 -> 20130830-1)
    [2013-08-31 18:36] [PACMAN] upgraded pcmanfm (1.1.1-1 -> 1.1.2-1)
    [2013-08-31 18:36] [ALPM] warning: /etc/php/php.ini installed as /etc/php/php.ini.pacnew
    [2013-08-31 18:36] [PACMAN] upgraded php (5.4.17-1 -> 5.5.3-1)
    [2013-08-31 18:36] [PACMAN] upgraded php-pear (5.4.17-1 -> 5.5.3-1)
    [2013-08-31 18:36] [PACMAN] upgraded poppler-glib (0.24.0-1 -> 0.24.1-1)
    [2013-08-31 18:36] [PACMAN] installed python-setuptools (1.0-1)
    [2013-08-31 18:36] [PACMAN] upgraded python-pip (1.4-1 -> 1.4.1-2)
    [2013-08-31 18:36] [PACMAN] upgraded python2-markupsafe (0.18-1 -> 0.18-2)
    [2013-08-31 18:36] [PACMAN] upgraded python2-mako (0.8.1-1 -> 0.8.1-2)
    [2013-08-31 18:36] [PACMAN] upgraded python2-pip (1.4-1 -> 1.4.1-2)
    [2013-08-31 18:36] [PACMAN] upgraded python2-zope-interface (4.0.5-1 -> 4.0.5-2)
    [2013-08-31 18:36] [PACMAN] upgraded sqlite (3.7.17-1 -> 3.8.0.1-1)
    [2013-08-31 18:36] [PACMAN] upgraded qt4 (4.8.5-1 -> 4.8.5-2)
    [2013-08-31 18:36] [PACMAN] upgraded redshift (1.7-6 -> 1.7-7)
    [2013-08-31 18:36] [PACMAN] upgraded reiserfsprogs (3.6.23-1 -> 3.6.24-1)
    [2013-08-31 18:36] [PACMAN] upgraded run-parts (4.3.4-1 -> 4.4-1)
    [2013-08-31 18:36] [PACMAN] upgraded smbclient (4.0.8-1 -> 4.0.9-1)
    [2013-08-31 18:36] [PACMAN] upgraded samba (4.0.8-1 -> 4.0.9-1)
    [2013-08-31 18:36] [PACMAN] upgraded serf (1.2.1-1 -> 1.3.0-1)
    [2013-08-31 18:36] [PACMAN] upgraded smartmontools (6.1-3 -> 6.2-1)
    [2013-08-31 18:36] [PACMAN] upgraded subversion (1.8.1-1 -> 1.8.1-2)
    [2013-08-31 18:36] [PACMAN] upgraded vim-runtime (7.3.1287-1 -> 7.4.0-2)
    [2013-08-31 18:36] [PACMAN] upgraded vim (7.3.1287-1 -> 7.4.0-2)
    [2013-08-31 18:36] [PACMAN] upgraded wicd (1.7.2.4-7 -> 1.7.2.4-9)
    [2013-08-31 18:36] [PACMAN] upgraded wicd-gtk (1.7.2.4-7 -> 1.7.2.4-9)
    [2013-08-31 18:36] [ALPM-SCRIPTLET] >>> This driver now uses SNA as the default acceleration method. You can
    [2013-08-31 18:36] [ALPM-SCRIPTLET] still fall back to UXA if you run into trouble. To do so, save a file
    [2013-08-31 18:36] [ALPM-SCRIPTLET] with the following content as /etc/X11/xorg.conf.d/20-intel.conf :
    [2013-08-31 18:36] [ALPM-SCRIPTLET] Section "Device"
    [2013-08-31 18:36] [ALPM-SCRIPTLET] Identifier "Intel Graphics"
    [2013-08-31 18:36] [ALPM-SCRIPTLET] Driver "intel"
    [2013-08-31 18:36] [ALPM-SCRIPTLET] Option "AccelMethod" "uxa"
    [2013-08-31 18:36] [ALPM-SCRIPTLET] EndSection
    [2013-08-31 18:36] [PACMAN] upgraded xf86-video-intel (2.21.14-1 -> 2.21.15-1)
    [2013-08-31 18:36] [PACMAN] upgraded xorg-xset (1.2.2-2 -> 1.2.3-1)
    I've just tried rebuilding the initramfs. It goes through without errors, but still won't accept my password on boot.

  • IPhoto 08 vsn 7.1.5 software issue.  Can't print a photo.  When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh

    Can't print a photo.  When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh.  Uploaded latest update but it still doesn't work.  Was going to try and load the software again but can't find the source as a download. 
    Cheers,
    Papasailor

    YOu need to reinstall iPhoto.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Syslogd process uses all available cpu & console app won't run.

    I have a Mac Mini (G4 power PC) running 10.5.5. Just recently after several minutes the system never wakes. It just shows the SBBOD. All I can do is hold down the power button and reboot. When the system reboots, using the activity monitor, I see that the process named syslogd uses all available cpu. I can still do things, but the cpu is saturated.
    I took a snapshot of the syslogd process, and I can post it here if anyone thinks it might help.
    If I activate the console application, the window comes up then hangs with the SBBOD.
    The syslogd process uses all available cpu right after reboot, and does so regardless of which user (including root) is logged in. Attempting to kill the syslogd process with the activity monitor does nothing

    Thanks! It took a long time for the disk utility to fix the permissions, but as soon as it did, the logger process calmed down. Looking at the log file now, I see it was my McAfee virus scan causing the logger to flip-out.
    I'm now looking for a new MAC anti-virus program.

  • Syslogd process ***** all available cpu & console app won't run.

    I have a Mac Mini (G4 power PC) running 10.5.5. Just recently after screen saver activates the display comes back, but the system never wakes. It just shows the SBBOD. All I can do is hold down the power button and reboot. When the system reboots, using the activity monitor, I see that the process named syslogd uses all available cpu. I can still do things, but the cpu is saturated.
    I took a snapshot of the syslogd process, and I can post it here if anyone thinks it might help.
    If I activate the console application, the window comes up then hangs with the SBBOD.
    The syslogd process ***** cpu right after reboot, and does so regardless of which user (including root) is logged in. Attempting to kill the syslogd process with the activity monitor does nothing

    just to let everyone know.
    I repaired my disk permissions, and "PRESTO" the syslogd process called down enough for me to find out it was my McAfee VirusScan application.
    Now I have to remember when things get funny, repair permissions.

  • How does one print single photos using iPhoto. I keep getting an error message:No Available Themes

    How does one print single photos using iPhoto. I keep getting an error message:No Available Themes

    You need to reinstall iPhoto. To reinstall iPhoto delete the current application and, on all Macs with Snow Leopard or earlier installed, all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the:
    HD/Library/Receipts folder (10.5 and earlier)
    or from the /var/db/receipts/  folder (10.6) .
    Deleting receipts is not necessary if your Mac came with Lion or later preinstalled.
    Then install iPhoto from the source it came from originally.
    OT

  • This is what i have:eMac Machine Model:     PowerMac6,4   CPU Type:     PowerPC G4  (1.5)   Number Of CPUs:1   CPU Speed:     1.42 GHz   L2 Cache (per CPU):     512 KB   Memory:512 MB   Bus Speed:     167 MHz   Boot ROM Version:     4.9.2f1? can i update

    this is what I have
    eMac
      Machine Model:          PowerMac6,4
      CPU Type:          PowerPC G4  (1.5)
      Number Of CPUs:          1
      CPU Speed:          1.42 GHz
      L2 Cache (per CPU):          512 KB
      Memory:          512 MB
      Bus Speed:          167 MHz
      Boot ROM Version:          4.9.2f1
    can i update to snow leopard?? and how?  im having a hard time its my first mac.   I need to to create documents, Im trying to avoid buying a new computer.

    You cannot upgrade to snow leopard. Snow leopard was the first of os x to drop support for the motorola ppc processors. The latest you could possibly run would be leopard.
    Hope it helps,
    Ryan

  • Why does my Mac boot with a Grey screen and a globe?

    Why does my Mac boot with a Grey screen and a globe?

    Usually means you don't have a bootable system installed so the OS is looking for a bootable system on the network.
    Does the computer eventually start up shortly after the globe appears? If so then open Startup Disk preferences, select your boot volume and click on the Restart button. If this is not the case then you need to reinstall Snow Leopard.
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

    Hi Folks,
    I was trying to save basic search template master page "seattle.master" after making change to the template.
    I have added just "CompanyName" folder and update the line below in seattle.master.
    Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
    When I save it, and refresh page on browser, it shows "Something went wrong" error.
    ULS says the following error : "UserAgent not Available, file operation may not be optimized"
    Pls let us know if there is a solution.
    Any help Much appreciated !
    Thanks,
    Sal
    

    Hi Salman,
    Thanks for posting this issue, 
    Just remove this below given tag and check out. It might be happened that your control is conflicting with others. 
    Also, browse the below mentioned URL for more details
    http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
    I hope this is helpful to you. If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • I can't update apps at mac app store - error saying "There was an error in the App Store. Please try again later. (100)"

    i can't update apps at mac app store - error saying "There was an error in the App Store. Please try again later. (100)"
    i tried it for weeks and months, but with no success.
    i am using macbook air mid 2011, running os x lion.

    try changing the date a month or a year ahead.. 

Maybe you are looking for

  • How to write a data type into an excel file?

    Hi everyone, What I am trying to do is to get some data from MS SQL then write into an excel file. stmtExcel.executeUpdate("Insert into [Output$] (CustomerID, ProductID, [Date], OrderQty) Values(" + rsSQL.getInt("CustomerID") + ", " + rsSQL.getInt("P

  • Configuring the SOAP Adapter

    Hi Folks, I have a sceanrio where an AXIS client needs to talk to the XI SOAP Adapter. How do I configure the SOAP adapter? I tried to access the help docs for configuring the SOAP adapter. I understand that the adapter depends upon the plain J2SE Ad

  • Inventory Management :Delta IP of BF runs with selection from Init IP of BF

    I have an init IP for BF DS which i ran with selection on posting date. I have another IP for delta for BF without any selection criteria. But, when i run the delta IP, it runs with the selection on posting date, the same value that i used for init.

  • Can I Extract Video From A DVD I Made?

    I made a DVD in DVD SP 4. I no longer have the source video, but I wanted to extract some of the video from this DVD to make it into a Quicktime. Is that tough to do?

  • Submit email button will not work

    I am trying to fill in a form and send it by email using Ubuntu 8.04 and Reader 8.1.2. I do not get the select email client window. It does work correctly on a Windows machine. It is a form I created in Adobe Professional 7.0. I would like to be able