Mac boots up - but cannot run any applications. No response to clicks

I inadvertently generated 4900 JPGs from an After Effects Render - now when I boot up the Dock appears, but no Desk Top icons or Networked disks appear and nothing works when I click it. Please help; all suggestions gratefully received.

Boot from your installer CD and then try to delete all those jpg's.  Maybe (only maybe) that will fix things up.  Might want to run Disk Utility as well to verify/fix the drive.

Similar Messages

  • I just bought a year abbo for premiere pro. But I cannot run any application. I only see adobe cloud everywhere. Where is my app? Does anyone know?

    Hello,
    Can anyone help?
    I just bought for a lot of money premiere pro. But I cannot see the application on my account. What is the problem?

    Have you downloaded and installed Premiere Pro (or any app other than Creative Cloud).
    In case you're under the impression that the Creative Cloud is actually cloud-based, with programs running on a server in the cloud somewhere, that's not the case (with a few exceptions).
    If you haven't installed PPro, open the Creative Cloud app, go to the Apps tab, find Premiere Pro, and click Install.

  • Have downloaded Yosemite and lost my outgoing mail settings in the process. I can still receive email from all my mail accounts but cannot send any...

    I have downloaded Yosemite but lost my outgoing mail settings in the process. I can still receive mail from all my accounts but cannot send any...

    Open mail
    click on mail  on top
    click preferences
    click accounts tab
    scroll down to TLS Certificate
    click up & down arrow and select  (com.apple.idms.appleid  )
    It worked for me

  • I have installed Lion and Microsoft Office 2011.  I want to uninstall Office 2004, but of course I cannot run the application to uninstall, because I get the "PowerPC applications are no longer supported" message.  Suggestions?

    I have installed Lion and Microsoft Office 2011.  I want to uninstall Office 2004, but of course I cannot run the application to uninstall, because I get the "PowerPC applications are no longer supported" message.  Suggestions?

    Go to this microsoft site http://support.microsoft.com/kb/312172 and/or this microsoft site http://support.microsoft.com/kb/2398768.  I would suggest removing both to start with a clean slate.  I had some problems with installing Office for Mac 2011 over 2008 and found out that by completely removing both and starting from a clean slate provided the best solution.  Kappy is correct but some sniglets do get left behind.  Hope this helps.  Cheers.

  • I cannot download any applications from apps store. when i enter the required information to get the apps, it says that my postcode is not accuarate. i am international but i purchased my ipod from the US

    I cannot download any applications from apps store. When i enter the required information to get the app, it says that my post code is inaccurate. i am from the caribbean but i have purchased my ipod in the US. I have entered a US postcode where i stayed as well and it failed also.

    You can ONLY use the itunes store of your country of residence.
    You cannot use another countrys itunes store.

  • Mac crashed and now upon restart I cannot launch any applications. When I try to, I just get the colorful pinwheel spinning, spinning, spinning...

    mac crashed and now upon restart I cannot launch any applications. When I try to, I just get the colorful pinwheel spinning, spinning, spinning...

    Troubleshoot the spinning beach ball

  • T410 laptop turns off abruptly when running any application

    Hi,
    T410 laptop turns off abruptly when running any application. I contacted the technical support, first they suggested me to run some diagnostics for hard disk which failed and so they sent me a new hard disk. Even then I faced the same problem. Again I contacted them and they told that they will change the system board. Today I received the laptop with new system board/updated BIOS.
    But still I am facing the same problem. I called the technical support again, they told me to use the latop in two modes ( 1. only battery and 2. only ac adapter) and check whether its happening again or ont. In both the cases I am seeing the same problem.  
    Laptop is only 5 months old and bought for  $1400........ 
    SOmebody help me........
     type:  2516 -CTO
    S/N:  xxxxxxx 10/03
    Thanks,
    Kobi
    Moderator Note; s/n edited for members own protection

    Hi and welcome to the forum!
    Tell us something more about your system, like installed memory size, processor speed, graphics card make and size, HDD size and so forth. Because yours is CTO model hence it's not possible to figure out these things without your telling us about them.
    I'm not very expert but I would say it's probably the RAM since system board and HDD have already been replaced or possibly you have got a lemon. But try following suggestions first.
    Do you get any sort of error message or Bluescreen? does Event Viewer report something unusual? Event Viewer can be opened by typing it's name in the search field in Windows 7. If you get Bluecreen you can view it via this program:- http://www.nirsoft.net/utils/blue_screen_view.html and let us know what it says.
    Also, make a bootable CD of mem86 and run the test on your RAM, mem86 can be downloaded free from:- http://www.memtest86.com/
    Lastly, you can burn LiveCD of any Linux distro and boot from it, if applications work fine in Linux environment then probably it's some software problem your thinkpad is having, re-imaging the system to factory state would be great initiative in that case.
    Keep us posted!
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Why is my mac so slow i have cleansed and cleaned it is a 2010 mac mini i5 but it runs like a 20 year old pc i have only had it for a few months and it was straight out of the box

    why is my mac so slow i have cleansed and cleaned it is a 2010 mac mini i5 but it runs like a 20 year old pc i have only had it for a few months and it was straight out of the box

    I'm thinking that you have a > Mac mini (Mid 2011) - Technical Specifications because the 2010 model's only have Core 2 Duo processors and the 2011 had the first i5 processor. 
    2 GB of RAM is the minimum requirement for Mountain Lion, but it's hardly enough to really enjoy doing anything else.
    see > Memory and Free Installation Guides for Apple Mac Mini
    Plus I don't have any problems running Mountain Lion and a load of App's on my 2010 Mac Mini with 8GB of RAM.

  • Installed Netweaver 2004s SP7 but cannot access any tools

    I have successfully Installed Netweaver 2004s SP7 Java version but cannot access any of the tool sets. When I try the URL's localhost:50100/irj or localhost:50100/caf it takes me to the initial screen. When I click on any of the tabs (example: Guided Procedures followed by Design time) everything is blank. If I type the URL localhost:50100/webdynpro/dispatcher/sap.com/cafeugpuidt/AppWorkset it takes me to the design time but when I click on anything to create actions or processes, I get the error message "The Web Dynpro 'AppWorkset' Application has expired. Restart the application with refresh button or the following link AppWorkset"
    My goal is to play with Guided Procedures. Is EP the only way to access design time and runtime or are there other ways?

    Yeah well that sounds like DNS problems so I suggest you change your DNS settings to use Google DNS servers at 8.8.8.8 and 8.8.4.4
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Can compile but cannot run.

    Dear Java Guru,
    Wish to find out why I can compile but cannot run. I encounter the following error: 'Exception in thread "main" java.lang.NoClassDefFoundError: javax/media/jai/JAI
    at saveasone.<init>(saveasone.java:29)
    at saveasone.main(saveasone.java:21)'
    This does not happen on one PC but happened on another PC.
    The one can compile is XP, the other which cannot compile is Win2k Professional. Is there any other possible cause ?
    Please advise.

    The problem probably lies in the Classpath. I think you are using different environments for compiling and running. If you are using an IDE for developing your code, you might have set the classpath correctly there but not in the executing environment. As about the OS's you mentioned, I think the problem is still with your Environment Settings than OS settings.

  • How to run windows application programs in mac book pro, how to run windows application programs in mac book pro

    how to run windows application programs in mac book pro, how to run windows application programs in mac book pro

    Install Windows..either by Boot Camp or via virtual machine from VMWare, Parallels or Virtual Box

  • I have downloaded adobe reader on but cannot open any pdf

    I have downloaded adobe reader to my mac, but cannot open any pdfs. Please help!

    What PDFs? What Mac? What version of OSX? Does Reader evben make a blip on your screen/ jump in teh dock/launchpad?
    Mylenium

  • I could not run any application program

    I could not run any application program( even thouht the simplest one such as helloword). It would give NoClassDefoundError as:
    Exception in thread "main" java.lang.NoClassDefFoundError: Welcome1
    Press any key to continue . . .
    I use text pad editor. First I compile it, there is no error. But when I try to run ( by click run java application program button ) it gives me the same error message.
    I also always have compile error such as no class define when I try compile the program which need to import user defined class from differerent package. ( even though I did put all the classed in the same directory and also use import statement)
    I did try to run many other applet programs which do not use any user defined class, in this case every thing work fine and I could run the program.
    That mean I could run simple applet program but not application, also i always have compile error when ever I tried to import user defined class.
    I'm afriad there is some thing wrong with the sdk and java enviroment, therefore I did try to uninstall the program and redownload from the web( I try both version 1.3 and 1.4 many time, and I did check the size of the application when I finish down load) but I still got the same problem.
    My computer operating system is WinMe.
    I appreciate any help
    Ha Tran

    When I was trying to write my final project(Client/Server Application with java & CORBA)I could not compile The simplest program like HelloWorld for Idl(Errors like yours).After two month accidentally I write set classpath= and HelloWorld start to work.I start to read the tutorial again,and I see that sun say it in the tutorial but I don't understand it because I read it fast.So it was somthing wrong with me not with sun.They work very hard.I like to work in sun in future.

  • Cannot install any application from new Winows market.

    Cannot install any application from new Winows market. I click "Install" and... that's all... nothing more...
    P.S. I am on domain network.

    Hi and welcome to Apple Discussions.
    Don't worry, no special etiquette, we're all friends here
    What was the software that you installed that claims to "enhance the speed of your system"? The logical thing to do would be to uninstall the application and hope that it hasn't caused wider ranging problems. The SW, if only halfway reputable, should have come with uninstall instructions. Follow the instructions, reboot and see if your download problem is fixed.
    WRT to the slowing down that prompted your (misguided) installation of this SW there are many things that may be the culprit but the most common and easiest to fix is the remaining space on your HD. What size is your HD and how much free space is there? This info can be obtained by selecting your HD and keying Command (Apple) + I (the letter 'eye').
    Post back with the SW concerned and the remaining space and we can take it from there.
    Good luck,
    Adrian

  • HT4967 I can sync data from my Mac to my iPhone and iPad and from my iPhone to the Mac and iPad, but cannot sync data from the iPad to either device. My iPad is configured to Push. Is there another setting than I'm forgetting?

    I can update data from my Mac to my iPhone and iPad, and from my iPhone to my Mac and iPad, but cannot get data to update from my iPad to either my Mac or my iPhone.

    If new calendar events entered on your iPad do not appear on icloud.com, go to Settings>Mail,Contacts,Calendars>Default Calendar on your iPad and be sure you have selected an iCloud calendar as your default and not something else like On My iPhone, a Gmail or Yahoo calendar, etc.  If you haven't, make this change, then add a new event and see if it appears on your calendar on icloud.com now.
    If your settings are correct and new events still aren't appearing on icloud.com, add any missing calendar events from your iPad to your calendar on icloud.com.  Once the calendar on icloud.com is up to date with your iPad, go to Settings>iCloud, turn Calendars to Off, choose Delete from My iPad when prompted (they will still be in iCloud), then after a 15 seconds or so, turn Calendars back to On.  Then add a new event on your iPad and see if it appears on your calendar on icloud.com now, and on your other devices.

Maybe you are looking for

  • JDeveloper 11g: How to get all the rows of a database table from applicatio

    Hello all! I'm developing a application with JDeveloper 11g, like subject show. So, I'm suppose to use some data which are in database table. So, I had the View Object where I want take data, to the datamodel. And after this, I use this next line in

  • Retraction problem, key figure mapping

    Hello guys: I am using the retraction function to retract activity data from BPS to R/3. I have created the sender structure and now I am creating the mapping rules. For the characteristics, there is no problem, but for the key figures, if I input a

  • |Solved| - Screen resolution and nVidia

    I installed arch, xorg, nvidia's drives, openbox and gnome. I can run gnome and openbox without any problem, however, my screen resolution isn't recognised.  Here's my /etc/X11/xorg.conf: # nvidia-xconfig: X configuration file generated by nvidia-xco

  • Mails whenevr an inbound idoc fails

    Hi Experts, Is there any way I can trigger mails whenevr an inbound idoc fails to update in r3.With reference to workflow etc Regards, Arnab

  • Exit Apllication problem

    Hey for everybody, i'm rather new, and it's my first topic over here. I was trying to find a solution for my problem, which is in simple thing: Using NetBeans, I created a single Desktop Application, and there i need to change the command on the [x]